What is the final pH if you have 700 ml of sodium acetate buffer (50 mM, ph of 5.0) and you add 10 ml of 1 M NaOH?

Intermolecular forces that would occur between the solute and solvent in an acetic acid are Hydrogen bridges, dipole-dipole interactions and dispersion force.

As a polar organic acid with a hydroxile group incorporated into a carboxyle function group, acetic acid has the ability to generate hydrogen bonds. On the other hand, because it can be partially dissociated, a piece of the chain that is partially positive or partially negative might engage in dipole-dipole interactions with other molecules.

Last but not least, London dispersion forces, a weaker version of the dipole-dipole interactions, are present when the electrons in two nearby atoms hold positions that cause the atoms to temporarily form dipoles.

Learn more about intermolecular forces at https://brainly.com/question/9328418

#SPJ4

While shampoo opens the cuticles of the hair to remove dirt and impurities, conditioner seals them to keep moisture in. These two essential hair care products work together to give you healthy, strong, and moisturized hair.

The shampoo's main purpose is to remove dirt and soil from your hair before conditioning it. This is typically accomplished by constructing the shampoo from two distinct types of ingredients. The first type are surfactants, which are used to clean the hair.

Hair conditioners typically contain cationic surfactants, which do not completely wash out because their hydrophilic ends bind to keratin. The surfactant molecules' hydrophobic ends then serve as the new hair surface.

Thus, A detergent molecule in shampoo acts as a surfactant, lowering the surface tension between water and sebum.

To learn more about the shampoo, follow the link;

https://brainly.com/question/13466045

#SPJ1

Net ionic and molecular equation for displacement reaction iron(ii) acetate potassium hydroxide molecular equation

[tex]HC_2H_3O_2 (aq) \:+KOH(aq)\:\rightarrow \:KC_2H_3O_2 (aq) \:+H_2O(l)[/tex] and the Net ionic equation

[tex]HC_2H_3O_2 (aq) \:+OH^-\((aq):\:\rightarrow \:C_2H_3O_2^-(aq)\:+H_2O(l)[/tex]

Chemical reactions known as displacement reactions occur when a more reactive element removes a less reactive element from a molecule. When two chemicals interact by transferring ions, a double displacement reaction occurs, creating two new molecules. In the twofold displacement process, positive ions trade places with negative ions. In water-soluble ionic compounds, numerous double displacement reactions take arise. Precipitation reactions are those in which an insoluble solid separates from the solution and forms.

molecular equation

[tex]HC_2H_3O_2 (aq) \:+KOH(aq)\:\rightarrow \:KC_2H_3O_2 (aq) \:+H_2O(l)[/tex]

ionic equation

[tex]HC_2H_3O_2 (aq) \:+K^+(aq)\:+OH^-\((aq):\:\rightarrow \:C_2H_3O_2^-(aq)\:+ K^+(aq)\:+H_2O(l)[/tex]

Net ionic equation

Here, we cancel the ions that appear on each side of the equation.

[tex]HC_2H_3O_2 (aq) \:+OH^-\((aq):\:\rightarrow \:C_2H_3O_2^-(aq)\:+H_2O(l)[/tex]

Learn more about displacement reaction

brainly.com/question/29307794

#SPJ4

Answer:

Solids

Explanation:

hope that helps!

The ionization constant, Ka, of a weak monoprotic acid with a 0.10 M solution and a pH of 4.0 is 1 x 10^-4. This means that for every 0.10 moles of the acid, 0.0001 moles will dissociate in an aqueous solution.

The reaction of a weak acid with water to form ions is known as acid dissociation. Weak acids, like the one in the question, do not completely dissociate in water and are only partially ionized. The degree of ionization is dependent on the value of the acid's ionization constant, Ka. This value is a measure of the acid's strength, and is determined by the equilibrium constant for the reaction between the acid and water.

Learn more about monoprotic acid:

https://brainly.com/question/12850710

#SPJ4

To determine the effect of changing the temperature on the rate of reaction of catalase, the following experiment can be designed:

Prepare a solution of catalase by dissolving it in a buffer solution of a suitable pH.

Add hydrogen peroxide to the catalase solution to initiate the reaction.

Record the initial rate of reaction by measuring the amount of oxygen produced over a set time interval (for example, every 30 seconds).

Repeat the reaction at different temperatures, starting at room temperature and gradually reducing it to below freezing.

At each temperature, repeat step 3 and measure the rate of reaction.

Plot the results to determine the effect of temperature on the rate of reaction.

By changing the temperature from cold to freezing, the rate of reaction of catalase will be affected due to the change in the activation energy of the reaction. The effect of temperature on the reaction rate can be determined by comparing the initial rate of reaction at each temperature. If the rate of reaction increases with increasing temperature, it can be concluded that the reaction is temperature dependent.

Learn more about catalase:

brainly.com/question/12905174

#SPJ4

The boiling point of a substance depends on the intermolecular forces of attraction between its molecules. Generally, the stronger the intermolecular forces, the higher the boiling point.

For each pair of compounds listed, the one with the higher boiling point is:

Learn more about a compound boiling point here: https://brainly.com/question/14058698

#SPJ4

The electron geometry of carbon tetrachloride is tetrahedral, with 4 single bonds. The bonding and hybridization of the central atom is sp3, meaning that the electron orbitals used in the bonding are three hybridized orbitals composed of one s orbital and three p orbitals.

SP3 hybridization is a type of electron orbital hybridization that forms four sp3 orbitals, which are composed of one s orbital and three p orbitals. This hybridization is most commonly seen in molecules where the central atom is surrounded by four different atoms or groups of atoms. In carbon tetrachloride, the carbon atom is surrounded by four chlorine atoms, and each chlorine atom is single-bonded to the central carbon atom.

Learn more about The electron geometry of carbon tetrachloride:

https://brainly.com/question/9846107

#SPJ4

Most of the transition elements show paramagnetic behavior. The unpaired electrons in d orbitals are responsible for the magnetic properties.

The paramagnetic nature of the transition metals increases on moving from left to right as the number of unmatched electrons increases from one to five. An interesting usual of transition metals is their ability to form magnets. Metal complexes that have unmatched electrons are magnetic.

Transition elements (also known as transition metals) are elements that have relatively filled d orbitals. IUPAC defines transition elements as an element having a d subshell that is moderately filled with electrons, or an element that has the ability to form stable cations with an faultily filled d orbital.

So we can conclude that Transition elements with paired electrons are diamagnetic, meaning they are interested to magnetic fields in the opposite direction.

Learn more about Transition elements here: https://brainly.com/question/20549803

#SPJ1

The resting potential of a neuron is maintained by selective permeability to potassium ions, and the initiation of the action potential is triggered by the opening of non-selective ion channels, allowing for the influx of positively charged ions.

A neuron at rest is in a state of polarization, meaning that there is a difference in electrical charge between the inside and outside of the cell. This resting potential is maintained by the selective permeability of the cell membrane to potassium ions, allowing them to flow out of the cell and creating a negative charge inside the cell. When an action potential is triggered, non-selective ion channels open, allowing positively charged ions such as sodium to enter the cell.

Learn more about potassium channels brainly.com/question/25262015

#SPJ4

The chemical produced by endothelial cells at the site of injury during the first step of platelet plug formation is von Willebrand factor (VWF). VWF is a glycoprotein that is released from endothelial cells when they are injured.

Endothelial cells are the cells that line the inside of the body's organs and vessels, such as the intestines, the heart, and the blood vessels. These cells are a type of epithelial cell, meaning that they form a single layer that serves as a barrier between the body's organs and the outside environment. Endothelial cells are particularly important in providing a barrier between the blood and the body's other organs and tissues. They are also important in regulating the movement of fluids and nutrients throughout the body, and in providing a barrier to stop any potentially harmful substances from entering the body. Endothelial cells also play an important role in regulating the body's inflammatory response, as well as its immune response. Endothelial cells are also important in regulating vascular tone, which helps to ensure that the blood vessels are working normally.

To learn more about endothelial

https://brainly.com/question/28819363

#SPJ4

As per the balanced reaction, 2 moles of sodium nitrate reacts with one mole of calcium carbonate. Then , 20 g or 0.2 moles of calcium carbonate needed 0.4 moles of sodium nitrate which is equal to 2.4 × 10²³ formula units.

One mole of every element contains 6.02 × 10²³ number of atoms. This number is called Avogadro number. Then, one mole of every compounds contain Avogadro number of molecules or formula units.

Given in the reaction, 2 moles of sodium nitrate is required by 1 mole of calcium carbonate.

molar mass of calcium carbonate = 100 g/mol

no.of moles in 20 g = 20/100 = 0.2 moles.

Hence, 20 g or 0.2 moles of calcium carbonate need 0.4 moles of sodium nitrate.

one mole of sodium nitrate contains 6.02 × 10²³ formula units. The number of formula units in 0.4 moles = 0.4  × 6.02 × 10²³ =2.4 × 10²³.

Therefore, the reaction need 2.4 × 10²³ formula units of sodium nitrate.

Find more on Avogadro number:

https://brainly.com/question/18948587

#SPJ1

Given the volume of carbon dioxide is 3.45 L at a pressure of 1 atm and 273 K. Then, the number of moles of CO₂ is 0.154 moles. 0.154 moles of carbon dioxide gives 0.154 moles or 15.4 grams of calcium carbonate.

Calcium carbonate is an ionic compound formed passing carbon dioxide gas through calcium oxide. As per the balanced reaction one mole of carbon dioxide and one mole of calcium oxide gives one mole of calcium carbonate.

Given, P = 1atm

v = 3.45 L for CO₂

T= 273 K

then use ideal gas equation to find the number of moles:

n = PV/RT

  = 1 atm  × 3.45 L/( 0.082 L atm/ K mol × 273 K) = 0.154 moles.

0.154 moles of  CO₂ gives 0.154 moles of CaCO₃.

molar mass of CaCO₃ = 100 g/mol.

mass of 0.154 moles = 100 × 0.154 = 15.4 g.

Therefore, the mass of  CaCO₃ formed will be 15.4 g.

Find more on CaCO₃:

https://brainly.com/question/28455207

#SPJ1

a) The mean number of drums ordered is 1.4.

b) The variance in the number of drums ordered is 0.84.

c) The standard deviation of the number of drums ordered is 0.917.

d) The probability mass function of Y is the same as the probability mass function of X.

e) The mean number of gallons ordered is 14.

(a) The mean (or expected value) of X can be found by multiplying each value of X by its probability and adding the results. So:

E(X) = (0)(0.4) + (1)(0.2) + (2)(0.2) + (3)(0.1) + (4)(0.1) = 1.4

Therefore, the mean number of drums ordered is 1.4.

(b) The variance of X can be found using the formula:

Var(X) = E(X²) - [E(X)]²

To find E(X²), we calculate:

E(X²) = (0²)(0.4) + (1²)(0.2) + (2²)(0.2) + (3²)(0.1) + (4²)(0.1) = 2.2

Then, we can find the variance:

Var(X) = 2.2 - (1.4)² = 0.84

Therefore, the variance of the number of drums ordered is 0.84.

(c) The standard deviation of X is the square root of the variance:

SD(X) = √(Var(X)) = √(0.84) = 0.917

Therefore, the standard deviation of the number of drums ordered is approximately 0.917.

(d) Let Y be the number of gallons ordered. Since each drum contains 10 gallons, we have Y = 10X. Therefore, the probability mass function of Y can be found by substituting Y/10 for X in the given probabilities:

y 0 10 20 30 40

p(y) 0.4 0.2 0.2 0.1 0.1

Therefore, the probability mass function of Y is the same as the probability mass function of X, except the values are multiplied by 10.

(e) To find the mean number of gallons ordered, we use the linearity of expectation:

E(Y) = E(10X) = 10E(X) = 10(1.4) = 14

Therefore, the mean number of gallons ordered is 14.

Learn more about the probability mass function at

https://brainly.com/question/30070005

#SPJ4

The question is -

A chemical supply company ships a certain solvent in 10-gallon drums. Let X represent the number of drums, ordered by a randomly chosen customer. Assume X has the following probability mass function:

x       0     1      2      3     4

p(x) 0.4  0.2  0.2   0.1   0.1

(a) Find the mean number of drums ordered.

(b) Find the variance of the number of drums ordered.

(c) Find the standard deviation of the number of drums ordered.

(d) Let Y be the number of gallons ordered. Find the probability mass function of Y.

(e) Find the mean number of gallons ordered.

Answer:

There are approximately 1.43 x 10^23 bromine atoms in 30.1 g of CH2Br2.

Explanation:

Calculate the molar mass of CH2Br2:

M(CH2Br2) = M(C) + 2M(H) + 2M(Br)

M(CH2Br2) = 12.01 g/mol + 2(1.01 g/mol) + 2(79.90 g/mol)

M(CH2Br2) = 252.82 g/mol

Calculate the number of moles of CH2Br2:

n = m/M

n = 30.1 g / 252.82 g/mol

n = 0.119 mol

Determine the number of bromine atoms:

There are 2 bromine atoms in each molecule of CH2Br2, so we can use Avogadro's number to convert moles to atoms:

N = n * N_A * 2

N = 0.119 mol * 6.022 x 10^23 atoms/mol * 2

N = 1.43 x 10^23 bromine atoms

Answer:

75.7082 liters

Explanation:

I did 20 gallons to liters

and I got 75.7082 liters

Please mark it brainliest. Ik it's probably wrong.

Without doing any calculations, the closest value for the average atomic mass of the element m is (a) the highest percent abundance & (d) 13.4.

The weighted average mass of the atoms that make up a naturally occurring sample of an element is what's referred to as its average atomic mass, which is also frequently referred to as its atomic weight. Unified atomic mass units (u), where 1 u is equal to precisely one-twelfth the mass of a neutral atom of carbon-12, are the standard units used to express average masses.

Since the average atomic mass of the element is close to the element with the highest percent abundance, which is close to 13.4 after doing the calculations, we got 13.815, which is close to 13.4.

The complete question is attached.

You can also learn about elements from the following question:

https://brainly.com/question/13794764

#SPJ4

The statement that is not true is "cis and geminal alkenes are considered equal in terms of stability."

Alkenes are organic compounds that contain a carbon-carbon double bond and are classified into two groups based on the orientation of their substituents: cis-alkenes and trans-alkenes. The stability of alkenes is influenced by various factors, including the degree of substitution and the heat of hydrogenation (ΔH).

Generally, trans-alkenes are considered more stable than cis-alkenes with the same substituents because the substituents are farther apart in the trans isomer. Meanwhile, a higher ΔH for the heat of hydrogenation means that the alkene is less stable, as it requires more energy to convert the double bond into a single bond.

Learn more about alkene stability here: https://brainly.com/question/28946346

#SPJ4

A subscript number in a molecule and a coefficient number in a chemical reaction are distinct from one another.

A collection of atoms that have chemically joined forces to create a unique chemical species is known as a molecule. The size of a molecule can vary from a small, diatomic species like oxygen (O2) to a large, complex structure like a protein. A molecule can also contain one or more types of atoms.

While a coefficient number in a chemical process, like 2H2O, denotes the number of molecules of a substance involved in the reaction, a subscript number in a molecule, like H2O, shows the number of atoms of a certain element in the molecule.

The coefficient number describes the amount of the material involved in a reaction, whereas the subscript number refers to the molecule's composition. For instance, the subscript 2 in the molecule H2O denotes that the molecule contains two hydrogen atoms and one oxygen atom. A coefficient of 1 would suggest that only one molecule of H2O is interacting in the reaction 2H2O, whereas a coefficient of 2 indicates that there are two molecules of H2O responding.

The stoichiometry of the reaction, which characterises the relative quantities of the reactants and products, is determined by the coefficient number.

To know more about molecules, visit:

https://brainly.com/question/19595631

#SPJ1

The initial alpha decay of Ts-293 (Tennessine) can be described by the following nuclear reaction:

Ts-293 → Rg-289 + He-4

In this reaction, Ts-293 (Tennessine) decays into Rg-289 (Roentgenium) and a helium-4 nucleus (alpha particle). The subscripts indicate the atomic number of each isotope and the superscripts indicate the atomic mass. The reaction is balanced, with one atom of Ts- 293 decaying into one atom of Rg-289 and one alpha particle (He-4).

Learn more about nuclear reaction here: https://brainly.com/question/13315150

#SPJ4

The gas pressure after compression will be 6.76 atm.

Assuming that number of moles of gas as well as the temperature remain constant during compression, the gas pressure after compression can be calculated as follows:

Given

Pressure = 1.43 atm

Volume = 7.7 L

Volume after compression = 1.64 L

V2 = (nRT) / 1.64 L P2 = (nRT)

P2 denotes the pressure after compression, and V2 denotes the volume after compression. To find P2, we must enter the following values into the equation:

6.76 atm = (1.43 atm x 7.7 L) / 1.64 L

As a result, the gas pressure after compression will be 6.76 atm.

To learn more about gas pressure refer to :

https://brainly.com/question/25736513

#SPJ1

The atomic packing factor for the diamond cubic crystal structure is 34% and  it is a loosely packed structure.

Number of atoms contributed by the corner atoms to an unit cell is 1/8×8 =1 and number of atoms contributed by the face centred atoms to the unit cell is 1/2 × 6 = 3 and atoms inside the structure=4 ,so total number of atoms present in a diamond cubic unit cell is 1 + 3 + 4 = 8, Since each carbon atom is surrounded by four more carbon atoms, the co-ordination number is 4.

From triangle WXY

XY^2=(a/4)^2+(a/4)^2

=(a^2)/8

From triangle XYZ

XZ^2=(a^2)/8 + (a/4)^2

=(3a^2)/16

But XZ=2r

So (2r)^2 = (3a^2)/16

Atomic radius r =( a(3)^1/2)/8

Atomic packing factor is = v/V

=[(8*4*PI*r^3)/3]/[(a)^3]

By putting value of r we get-----

APF=0.34 =34%

Thus it is a loosely packed structure.

To learn more about unit cell check the link below:

https://brainly.com/question/17218051

#SPJ4

Answer:

C. Gamma/X-rays have no mass and no charge.

Explanation:

Gamma/X-rays are a type of electromagnetic radiation with no mass and no charge. They differ from other forms of radiation, such as alpha and beta particles, which have mass and charge. Gamma/X-rays are high-energy photons that have the highest frequency and shortest wavelength in the electromagnetic spectrum. They have very high ionizing power, which means they can remove electrons from atoms and molecules as they pass through matter, leading to potentially harmful effects on living organisms.

One moles of SF₆ contains 6.02 × 10²³ molecules and it weighs 146 g. The number of moles of  6.95 × 10²⁴ SF₆ molecules is 11.54. he mass of 11.54 moles is 1686 g.

One mole of a substance is its amount containing 6.02 × 10²³  atoms or molecules. This number is called Avogadro number. One mole of every elements contains Avogadro number of atoms.

Similarly one mole of every compound contains 6.02 × 10²³  molecules. The mass of one mole of compound is called its molar mass.

Molar mass of SF₆ = 146 g/mol

No.of atoms in 146 g or one mole of SF₆ =  6.02 × 10²³

Then, number of moles of  6.95 × 10²⁴ SF₆ molecules  

=  6.95 × 10²⁴/6.02 × 10²³ = 11.54 moles.

Mass of 11.54 moles = 11.54 × 146 =1686 g.

Therefore, 6.95 × 10²⁴ SF₆ molecules  weighs 1686 g.

Find more on Avogadro number:

brainly.com/question/11907018

#SPJ1

Enzymes are specialized proteins which can speed the reactions to a very great extent and thereby acts as efficient catalysts. The enzyme activity depends on pH and temperature.

The biological catalysts which catalyze the chemical reactions taking place inside the cells and are capable of acting independently on the cells are defined as the enzymes.

Enzymes catalyze and control several chemical reactions that occur in our living cells. They helps in digestion, liver function, breathing, reproduction, nerve function, etc. The enzyme urea catalyzes the hydrolysis of urea.

The enzyme activity is sensitive to the temperature changes. All the enzymes shows maximum catalytic activity at optimum temperature. They are found to be denatured by heat and hence their activity is destroyed at high temperatures.

Thus at high temperature the enzymes will be inactive and this will affect the vital organs and lead to death.

To know more about enzymes, visit;

https://brainly.com/question/29774898

#SPJ1      

On increasing the temperature and pressure of ideal gas volume increases. The ideal gas, sometimes known as the perfect gas.

The ideal gas, sometimes known as the perfect gas, is a gas that, in physical behavior, corresponds to a certain idealized connection among pressure, volume, as well as temperature known as the ideal, or general, gas law.

This law is a generalization that includes both Boyle's and Charles' laws as special instances, and it asserts that for a given amount of gas, the product of volume V plus pressure P is proportionate to absolute temperature T; that is, PV = kT, where k is a constant. On increasing the temperature and pressure of ideal gas volume increases.

Therefore, on increasing the temperature and pressure of ideal gas volume increases.

To learn more about ideal gas, here:

https://brainly.com/question/12677792

#SPJ1

The hydronium ion ion, H 3 O +, found in all solution of acids in water, serves as the real catalyst in this situation. The ester absorbs a protons (a h+) from of the base in the first step.

Acidic compounds are what?

Acidic compounds can come from both plant sources, like the citric acid found in fruits, and artificial sources, like sulphuric acid. Typical compounds that react to generate salt and water whenever they come into touch with one another are acids and bases. The word "acid" comes from the Latin acere, which means "sour."

Acid in water is what?

Any material that when dissolved in water has an acidic taste, can change the color of some indicators (such as reddening blue litmus paper), can react with some metals (such as iron) to release hydrogen, can combine with bases to produce salts, and can accelerate some oxidation processes (acid catalysis)

To know more about acids visit:

https://brainly.com/question/14072179

#SPJ1

Can be used to calculate the y-component of the electric field in N/C produced by a positive point charge at coordinate (0,0) in water. Therefore, the positive point charge in water at coordinate (1.01, -3.55) produces a total electric field in N/C with a y-component of -4.55 x 105 N/C.

An electrically charged object can produce an electromagnetic field that has an impact on other electrically charged objects nearby. Lines of force radiating from the charged object and interacting with other charged objects can be used to represent this field. As the charged object is moved further away, the electric field's strength weakens in direct proportion to the charge. A fundamental idea in physics, the electric field is utilised to explain how charged particles interact. It is measured in units of N/C and is a vector quantity (Newtons per Coulomb). Coulomb's law, which states that the force between two charged objects is proportional to the product of the electric field can be used to compute the electric field.

Leran more about Electric field here:

https://brainly.com/question/12943568

#SPJ4

The melting point of a solid can be used for the following qualitative purposes:

To determine the purity of the recrystallized solid.

To determine the identity of the unknown solid.

Impurities cause a substance's melting point to rise or fall, whereas a pure substance has a clearly defined melting point.

One can determine whether a sample is pure or impure by comparing the melting point of the sample to the known melting point of a pure substance.

A solid's melting point can be used to identify it. It is frequently possible to identify an unknown solid by comparing its melting point to the melting points of various reference materials.

How the melting point of a solid can be used to assess its purity?

Melting points can be used to determine whether a substance is pure or impure because an impure substance is a particular kind of mixture. Impure materials typically have a wider melting temperature range and a slightly lower melting point than pure materials.

What is the importance to identify the melting point of the recrystallized compound?

The melting point must be established. It can be used to identify a known compound first. Second, it may aid in the later definition of an unidentified compound. Third, it can be used to assess a substance's purity.

To know more about melting point:

https://brainly.com/question/29578567

#SPJ1

The volume of a substance is found to be measured in Liters, Milliliters, cubic meters, etc. The volume in quarts is occupied by 100g of Hg is 0.0077.

The term volume of a substance denotes how much capacity of matter it can hold. For example if a beaker can hold 100 mL of water, then its volume is said to be 100 mL.

The volume is also known as the ratio of mass to the density.

The equation connecting density and mass of a substance is given as:

Density (d) = Mass / Volume

Here density of Hg = 13.6 g cm⁻³, Mass = 100 g

Then d = 100 g / 13.6 = 7.352 cm³

1 cm³ = 0.001 L

V = 7.352 × 0.001 = 0.00735 L

1 L = 1.057 Quartz

0.00735 L = 0.0077 quartz.

Thus the volume in quarts is 0.0077.

To know more about density, visit;

https://brainly.com/question/3441795

#SPJ1