Answer:
radiant
Explanation:
Radiant Energy
This should do it.
I 6) Ca(OH)2 + 2HCl -----> CaCl2 + 2H2O How many molecules of calcium chloride are produced by the combination of 3.5x1024 molecules of hydrochloric acid with excess calcium hydroxide?
Answer:
go for what ever brother GUESS / imagine this gate brainlyist for literally doing nothing.
Explanation:
Which of the following is a inert gas?
oxygen
chlorine
nitrogen
aragon
Answer:
argon is an inert gas
Explanation:
an inert gas is when a chemical helium, xenon, neon, krypton, radon are also inert gases
Does salt affect how long an ice cube melts?
I am just talking about normal salt, not special salt (if that exists).
Answer:
Ice cubes with salt melt faster. When you add salt, it dissolves in the water of the ice cube. The freezing temperature of salt water is 32 degrees Fahrenheit lower than that of fresh water.
N yogurt de 125 g muestra en su etiqueta el contenido de algunas de sus sustancias nutricionales:¿Cuál es la composición en tanto porciento en masa de cada una de las sustancias? Composición Sustancia Masa Proteínas 5,5 g Azúcares 5,0 g Sodio 0,06 g Potasio 0,15 g
Answer:
Sustancia Masa (g) Composición (% m/m)
Proteínas 5,5 4,4
Azúcares 5,0 4,0
Sodio 0,06 0,048
Potasio 0,15 0,12
Explanation:
Para calcular la composición porcentual en masa de las sustancias debemos usar la siguiente ecuación:
[tex] \%_{m/m} = \frac{m_{s}}{m_{sol}} \times 100 [/tex]
En donde:
[tex]m_{s}[/tex] es la masa de la sustancia
[tex]m_{sol}[/tex] es la masa del yogurt = 125 g
Para las proteínas:
[tex] \%_{m/m} = \frac{m_{s}}{m_{sol}} \times 100 = \frac{5,5 g}{125 g} \times 100 = 4,4 \% [/tex]
Para los azúcares:
[tex] \%_{m/m} = \frac{5,0 g}{125 g} \times 100 = 4,0 \% [/tex]
Para el sodio:
[tex] \%_{m/m} = \frac{0,06 g}{125 g} \times 100 = 0,048 \% [/tex]
Para el potasio:
[tex] \%_{m/m} = \frac{0,15 g}{125 g} \times 100 = 0,12 \% [/tex]
Espero que te sea de utilidad!
Sort the characteristics based on whether they describe a dog, a computer, or both.
has internal
organization
has living
cells
uses energy
produces
offspring
lacks genetic
material
Answer:
both have internal organization dog only has living cells both use energy dogs only produce offspring computers only lack genetic material
State joule thomson effect
Answer:
In thermodynamics, the Joule–Thomson effect describes the temperature change of a real gas or liquid when it is forced through a valve or porous plug while keeping it insulated so that no heat is exchanged with the environment. This procedure is called a throttling process or Joule–Thomson process
Why should we never change a symbol in chemistry?
Answer:
Chemical symbols are used to standardize the 'language of chemistry' and to identify elements and atoms in a chemical formula easily. Chemical symbols consist of one or two letters, most often derived from the name of the element.
Explanation:
What is the proper compound formula for Hydrogen Cyanide?
A.) H(CN)2
B.) H2(CN)
C.) HCN
D.) H2(CN2)
Answer:
C
Explanation:
Cyanide's formula can be found either on google on on a reference table at the "polyatomic ions" table. Hydrogen, H, has a charge of 1+ when bonded, and cyanide has a charge of 1- overall, so they will be in a one to one ratio while bonded. As such, the equation is HCN.
The Principle Quantum Number describes what aspect of electron orbitals?
a) shape.
b) orientation.
c) spin.
d) energy level.
Answer:
C
Explanation:
Because that's the spin in its orbitals.
what is the GMM of 64gm of oxygen
Answer:
16 g/mol
Explanation:
The GMM of oxygen is 16 no need for mass
What is the mass of 2.23 x 10^23 atoms of sulfur?
Answer: 32.07 g/mole
Explanation:
1 mole of sulfur contains 6.022 ×10^23 atoms
1 mole is equal to 32.07 g
6.022 ×10^23 atoms = 32.07
A special layer of dermal cells are found on the top side of leaves. What level of organization would it belong to
Answer:
Tissue level of organization
Explanation:
The various levels of the organization of life are as follows:
Cells: a cell is the basic unit of ife
Tissues; A tissue is a group of cells with a common origin. performing similar functions.
Organ: an organ is a group of tissues with varied or similar function that work together to perform a specific function.
System: a system is a group of different organs that work together in the body to perform a specific function.
Since, the leaf is an organ in the plant that performs the function of photosynthesis, the group of dermal cells found on the leaf are in the tissue level of organization, they perform the function of protection for the leaf.
(2 words) if compose means to put together then decompose means to what? 9 letters!
Write down the names of compounds represented by the following formulae:
a. Al2(SO4)3
b. CaCl2
c. K2SO4
d. KNO3
e. CaCO3
Hellp plss
The compounds have been formed by the combination of molecules and atoms. The names are a. aluminum sulfate, b. calcium chloride, c. potassium sulfate, d. potassium nitrate, and e. calcium carbonate.
What is the chemical formula?The chemical formula has been defined as the representation of the chemical compound or molecules with the aid of symbols, letters, and coefficients to show the proportions, arrows, parentheses, signs, etc.
The chemical formulas are named as:
Al₂(SO₄)₃ - aluminum sulfate. It has been used in purifying water, sewage treatment, tanning, paper industries, etc.CaCl₂ - calcium chloride. It is an ionic compound used in making electrolytes and sports drinks.K₂SO₄ - potassium sulfate. It has been used for making fertilizers for tobacco and vegetable crops.KNO₃ - potassium nitrate. It is an oxidizer used for making explosives and fertilizers.CaCO₃ - calcium carbonate. It is used as a dietary product to satisfy the needs for calcium and vitamin D for bone strengthening and formation.Learn more about chemical formulas, here:
https://brainly.com/question/16950183
#SPJ6
Global warming is mainly due to
CFC's
Ozone Holes
Nitric and sulfuric acids
Greenhouse gases
Answer:
Explanation:
Glaciers are melting, sea levels are rising, cloud forests are dying, and wildlife is scrambling to keep pace. It has become clear that humans have caused most of the past century's warming by releasing heat-trapping gases as we power our modern lives. Called greenhouse gases, their levels are higher now than at any time in the last 800,000 years.
We often call the result global warming, but it is causing a set of changes to the Earth's climate, or long-term weather patterns, that varies from place to place. While many people think of global warming and climate change as synonyms, scientists use “climate change” when describing the complex shifts now affecting our planet’s weather and climate systems—in part because some areas actually get cooler in the short term.
Climate change encompasses not only rising average temperatures but also extreme weather events, shifting wildlife populations and habitats, rising seas, and a range of other impacts. All of those changes are emerging as humans continue to add heat-trapping greenhouse gases to the atmosphere, changing the rhythms of climate that all living things have come to rely on.
What will we do—what can we do—to slow this human-caused warming? How will we cope with the changes we've already set into motion? While we struggle to figure it all out, the fate of the Earth as we know it—coasts, forests, farms, and snow-capped mountains—hangs in the balance.
which atom in each pair has the larger atomic radius?
li or k
ca or ni
ga or b
o or c
cl or br
be or ba
si or s
fe or au
Answer:
1. Potassium, K.
2. Calcium, Ca.
3. Gallium, Ga.
4. Carbon, C.
5. Bromine, Br.
6. Barium, Ba.
7. Silicon, Si.
8. Gold, Au.
Explanation:
Atomic radius can be defined as a measure of the size (distance) of the atom of a chemical element such as hydrogen, oxygen, carbon, nitrogen etc, typically from the nucleus to the valence electrons. The atomic radius of a chemical element decreases across the periodic table, typically from alkali metals (group one elements such as hydrogen, lithium and sodium) to noble gases (group eight elements such as argon, helium and neon). Also, the atomic radius of a chemical element increases down each group of the periodic table, typically from top to bottom (column).
Additionally, the unit of measurement of the atomic radius of chemical elements is picometers (1 pm = 10 - 12 m).
1. Li or K: the atomic radius of lithium is 167 pm while that of potassium is 243 pm.
2. Ca or Ni: the atomic radius of calcium is 194 pm while that of nickel is 149 pm.
3. Ga or B: the atomic radius of gallium is 136 pm while that of boron is 87 pm.
4. O or C: the atomic radius of oxygen is 48 pm while that of carbon is 67 pm.
5. Cl or Br: the atomic radius of chlorine is 79 pm while that of bromine is 94 pm.
6. Be or Ba: the atomic radius of berryllium is 112 pm while that of barium is 253 pm.
7. Si or S: the atomic radius of silicon is 111 pm while that of sulphur is 88 pm.
8. Fe or Au: the atomic radius of iron is 156 pm while that of gold is 174 pm.
The atoms in each pair which has the larger atomic radius is;
Potassium, K.Calcium, Ca.Gallium, Ga.Carbon, C.Bromine, Br.Barium, Ba.Silicon, Si.Gold, Au.Definition:
Atomic radius is simply the distance from the centre of the nucleus to the outermost shell containing electrons.
In other words, the atomic radius is the distance from the center of the nucleus to the point up to which the electron cloud density is maximum.
Trend:
The atomic radius of atoms generally decreases from left to right across a period. The atomic radius of atoms generally increases from top to bottom within a group.
It is on this basis that atoms with the larger atomic radius are determined
Read more:
https://brainly.com/question/2848851
How does the amount of fertilizer affect how many potatoes a plant produces?
Answer:
Excess fertilizer alters the soil by creating too high of a salt concentration, and this can hurt beneficial soil microorganisms. Over- fertilization can lead to sudden plant growth with an insufficient root system to supply adequate water and nutrients to the plant
Explanation:
What is the correct structure of an atom?
which other metal can substitute (in place of) iron explain you answer.. Aluminum, copper or iron?
Answer+Explanation:
Titanium ( in place of iron)
Titanium could be an excellent replacement for iron when it comes to tensile strength versus weight. It would be the first choice as a building material metal and building skeletons/bridges would use titanium instead of iron.
Magnesium alloys (in place of aluminum)
Magnesium alloys potentially met the present demands for lighter and reliable construction. With comparable specific stiffness, higher specific strength and energy absorption magnesium alloys have the potential to replace steel and aluminum alloys.
aluminum (in place of copper)
Most non-copper metal cabling is aluminum, and it is often used in areas where copper is not a likely alternative. However, it is used more now as a replacement than it has ever been. It is cheaper than copper, and its relative density allows for more cable to be made from a ton of aluminum than a ton of copper.
hope it helps you
The white Dwarfs are a group of stars that are-
A)Extremely bright and hot
B)Low in brightness but are average to high in temperature
C)Average in brightness but high in temperature
D)Average in brightness and average in temperature
Answer: A
Explanation:
The white Dwarfs are a group of stars that are extremely bright and hot. Hence option A is correct.
What are stars?Stars are defined as any large gaseous heavenly body that emits light as a result of its own internal energy sources. Stars are celestial bodies that generate their own energy through the fusing of gases. They resemble bright orbs that burn gas and produce energy. Our solar system's star, the Sun, generates energy through the fusion reaction in which helium transforms into hydrogen.
When a white dwarf first forms, it is extremely hot, but because it has no energy source, it will gradually cool as it emits its energy into space. This implies that the color temperature of its radiation, which is initially high, will gradually decrease and turn red. After using up all of their nuclear fuel, stars like the Sun become white dwarfs.
Thus, the white Dwarfs are a group of stars that are extremely bright and hot. Hence option A is correct.
To learn more about stars, refer to the link below:
https://brainly.com/question/7379319
#SPJ2
What element is represented by each electron
configuration?
A. 1s 2s22p5
B. [Ar]4s
C. [Xe]6s24f
D. [Kr]5s4d105p+
E. [Rn]7s25f13
F. 1s 2s 2p 3s 3p 4s3d104p
Answer:
F.1s 2s 2p 3s 3p 4s3d104p
The element in the first configuration is F and the element in the second option is calcium Ca. The configuration in option c is of cerium Ce and it is cadmium in option D. The configuration in E is mendelevium and F is zinc.
What is electronic configuration?An electronic configuration represents the filling of electrons in various energy level. Electrons fill from the lowest energy levels to the highest energy level.
The first configuration have a total of 9 electrons. The 9th element is fluorine. The second configuration given is of 20 electrons. That is 18 electrons of argon plus 2 electrons in 4s. The 20th element is calcium.
The third configuration have 58 electrons and the element is cerium Ce. The configuration given in option D is of cadmium with 48 electrons and that in option E is mendelevium with 101 electrons.
In the last option, the configuration contain a total of 30 electrons. 3o th element in periodic table is zinc, Zn.
To find more about electronic configuration, refer the link below:
https://brainly.com/question/14283892
#SPJ2
Please help due in 5 min. I need this to be done or my grade will drop from a 96 to a 32.
Calculate the energy and frequency of red light having a wavelength of 6.55 x 10^-5 cm.
Answer:
E = 3.035× 10-¹⁹J = 1.9eV
f = 4.58 × 10¹⁴Hz
Explanation:
wavelength = 6.55 × 10-⁷m
c = 3 × 10⁸m/s
f = ?
E = ?
a) f = c/wavelength
f = 3 × 10⁸/6.55 × 10-⁷
f = 4.58 × 10¹⁴Hz
b) E = hc/wavelength
E = 6.626×10-³⁴ × 3 × 10⁸/ 6.55 × 10-⁷
E = 3.035 × 10-¹⁹J
1ev = 1.6 × 10-¹⁹J
Therefore E = 3.035/1.6 = 1.9eV
Explanation:
speed of light = wavelength * frequency
frequency =speed of light/wavelength
Let frequency = F
Speed of light = 3.0 *10^8
wavelength = 6.55 * 10^-5 cm = 6.55 * 10^-7m
Therefore F= 3.0 *10^8m/s *6.55 * 10^-7m
F = 196.5Hz
Energy = Planck's constant * frequency
Let energy be E
Planck's constant = 6.63 * 10^-34Joule/ seconds
E = 6.63 * 10^-34 * 196.5Hz
E=1.3027 * 10^-31 J
A compound composed of only C and H contains 79.88 % C by mass. What is its empirical formula?
C a CH 3
Ob.CH 2
Oc CH 4
0 0 CH
Оe. Сэн
Answer:
a. CH3
Hope this helps.
Which of these is NOT a layer of the skin?
Answer:
Penis EPISODE ONE!!
NEW ADVENTURES
Explanation: MAKE SURE TO LIKE AND SUB!!
What do I write? Please hurry
Answer:
Plants wilt when the turgor turns to zero. From diminished water in cells. The rate of water being lost is greater then the water being absorbed.
Something like this. NOT EXACTLY THIS this is just an example.
I didn't know anything about this topic but I looked it up. For the other words I would look up the other words and see what they have to do with plants withering.
Determine the number of protons, neutrons, and electrons for a neutral potassium-41 isotope.
25 pointss How do the plates and mantle interact at each type of plate boundary?
Answer:
what that girl said lol
Answer:
honestly.. idk lol
Explanation:
lonic compounds can conduct electricity in
Answer:
Ionic compounds conduct electricity when molten (liquid) or in aqueous solution (dissolved in water), because their ions are free to move from place to place. Ionic compounds cannot conduct electricity when solid, as their ions are held in fixed positions and cannot move
Explanation:
hi pls help me I don't get it
Answer:
It's most probably
A non metal
Robert Hooke used a microscope to observe tiny spaces in
dead cork bark.
What did his observations lead to the discovery of?
A. Bacterial cells
B. Plant cells
C. Cell division
D. Cell organelles
Explanation:
B. Plant cells is the correct answer
Answer:
plant cells cause the plant cells was his first discorvery