which of the standard 20 amino acids is technically not an amino acid?

The empirical formula of a compound is the simplest whole-number ratio of atoms in a molecule of the compound. the possible empirical formula for ch2 among given choices is c. C12H22.

The molecular formula, on the other hand, gives the actual number of atoms of each element in a molecule of the compound. The molecular formula can be a multiple of the empirical formula.

In this case, the empirical formula of the compound is CH2, which means it contains one carbon atom and two hydrogen atoms.

Therefore, the molecular formula of the compound could be C2H4, C4H8, or any other multiple of CH2, but it cannot be C7H14 or C12H22 because these molecular formulas are not multiples of CH2.

So, the correct answer is: c. C12H22.

Learn more about empirical formula here:

https://brainly.com/question/21280037

#SPJ4

The work associated with the expansion of a gas from 42.0 l to 79.0 l at a constant pressure of 14.0 atm is 518.0 atm-l

Work in chemistry is the energy or force required to perform a chemical reaction or to move an object from one place to another. Work in chemistry is most often associated with physical transformations such as changes in pressure, temperature, or volume. Chemical reactions also require work, such as when a reactant is converted into a product. Work is an important concept in thermodynamics, which is the study of energy and its transformation from one form to another. In thermodynamics, work is measured in joules or calories, which are units of energy. Work is also used to describe the energy needed to break or form chemical bonds, which is the basis of many chemical reactions.

Work = (Pressure)(Change in Volume)

Work = (14.0 atm)(79.0 l - 42.0 l)

Work = (14.0 atm)(37.0 l)

Work = 518.0 atm-l .

The work associated with the expansion of a gas from 42.0 l to 79.0 l at a constant pressure of 14.0 atm is 518.0 atm-l. This is because a pressure-volume expansion requires work, which we can calculate using the formula Work = (Pressure)(Change in Volume). In this case, we multiply the pressure by the change in volume to get the work.

To learn more about Work

https://brainly.com/question/26487364

#SPJ4

352 grams of glucose are required to form 180 g of ethanol.

This is an example of a decomposition reaction. In a decomposition reaction, a single compound breaks down to form two or more new compounds or elements. It requires an energy source such as heat, light or electricity.

Molecular mass of Glucose = 180 g

Molecular mass of ethanol = 46 g

Thus 2 × 46 g = 92 g of ethanol is formed, from 180 g of glucose.

92 gm of ethanol is formed from 180 grams of glucose.

1 gm can be formed using = 180/92 grams of glucose

Now 180 gram of ethanol would require, 352 grams of glucose.

To know more about the decomposition reaction, here

brainly.com/question/16987748

#SPJ4

The benefits of transmuting metals include having access to rare and valuable materials as well as reduced environmental impact.

Some losses from transmuting metals include the high cost and the safety concerns from radiation.

Transmuting metals involves the transformation of one metal into another by means of nuclear reactions. transmuting metals can provide access to rare and valuable metals that are in short supply, such as platinum and gold.

The process of transmuting metals can be expensive, especially if done on a large scale. The process of transmuting metals involves the use of nuclear reactions, which can pose a risk of radiation exposure.

Find out more on transmuting metals at https://brainly.com/question/11097938

#SPJ1

Answer:

What are the benefits of transmuting metals?

Although in the present state of science no chemist can say that lead and gold do not contain the same elements.

What can you gain from transmuting metals?

To the alchemists of old, this meant the conversion of one physical substance into another, particularly base metals such as lead into valuable silver and gold.

What can you lose by transmuting metals?

A transmutation entails a change in the structure of atomic nuclei and hence may be induced by a nuclear reaction (q.v.), such as neutron capture, or occur spontaneously by radioactive decay, such as alpha decay and beta decay (qq. v.).

it is limited by the costly and cumbersome need to separate long-lived fission product isotopes before they can undergo transmutation. also, some long-lived fission products, due to their small neutron capture cross sections, are unable to capture enough neutrons for effective transmutation to occur.

Have a wonderful day! :-)

#SPJ1

The number of Titanium atoms that has a density of 4.50 g/cm³ and edge length cube of 2.78 inches equals to 1.99 × 10²⁵atoms

The ratio of a substance's mass to its volume is the formula for determining its density. Density is measured in kilograms per cubic meter. We can use the following formula to get the density of a cube as it is shown here:

Density = Mass of cube ÷ Volume of cube

First, we need to convert the Edge length of cube’s unit

2.78 inches = 7.0612 cm

Mass of Titanium = Density × Volume

Mass = Density x (Edge length)³

Mass = 4.5 g/cm³ × (7.0612 cm³)³

Mass = 1584.33877 g

Moles of Titanium = Mass of Titanium ÷ Molar mass of Titanium

Moles of Titanium = 1584.33877 g ÷ 47.867 g/mol

Moles of Titanium = 33.099 mol

Thus, the number of atoms in Titanium would be:

Atoms of Titanium = 33.099 mol × 6.022×10²³ atoms/mol

Atoms of Titanium = 1.99 × 10²⁵ atoms

To learn more about titanium, click here:

https://brainly.com/question/8028003

#SPJ4

S- is present at a concentration of 2 10(-13) M, whereas H+ is present at a concentration of 0.05 M.

The number of moles in relation to the substance's volume is known as the concentration.

H2S is entirely ionized in the solution, as we are all aware of.

the chemical formula H2S ——- 2(H+) + S2-

Concentration = volume / moles

It is discovered that the concentration of H+ ions and H2S are equivalent.

[H+] = [H2S] = 0.05M

Being aware of that

[H+] [OH-] = 10^(-14) (-14)

[OH-] = 10^(-14) / 0.05

[OH-] = 2 × 10^(-13) (-13)

The concentration of S- in is therefore 2 10(-13) M, while the concentration of H+ ion is 0.05M.

The complete question is,

Determine how much of each species there is in an H2S solution with a concentration of 0.05 m.

To learn more about concentration refer to:

brainly.com/question/18724033

#SPJ1

In this reaction, the theoretical yield of aluminum oxide is 77.27 g. The percent yield of aluminum oxide is 78.7%, which is calculated by dividing the actual yield (61.0 g) by the theoretical yield (77.27 g) and multiplying by 100.

The percent yield of a reaction is an important measure of its efficiency. It is calculated by dividing the actual yield of a product by the theoretical yield and multiplying by 100. A higher percent yield indicates that more of the desired product was produced in the reaction, and that the reaction was more efficient.

The percent yield of a reaction can be affected by several factors, such as the amount of reactants present, the temperature at which the reaction is conducted, and the presence of catalysts or other substances that can affect the rate of the reaction.

Learn more about percentage yield of aluminum oxide:

https://brainly.com/question/29081861

#SPJ4

the mass of methanol is  22.2g  and 33.8g  [tex]H_2O[/tex]

The idea here is that you need to use the definition of mole fraction to find a relationship between the number of moles of methanol,

, and the number of moles of water.

mole fraction is defined as the ratio between the number of moles of a component i of a solution and the total number of moles present in that solution.

[tex]X_i=\frac{No\: of\: moles\: of\: i}{total \: no \: of \:moles}[/tex]

Now,  solution contains methanol, your solute, and water, your solvent. If you take x to be the number of moles of methanol and y to be the number of moles of water,

the mole fraction of methanol will be= [tex]X_{Ch_3oh}=\frac{x}{x+y} =0.270 \rightarrow(1)[/tex]

[tex]X_{Ch_3oh}=\frac{x\times32.042}{1} =32.042x[/tex]

the same for water

[tex]Y_{H_2O}=\frac{y\times18.015}{1} =18.015y[/tex]

You thus have

32.042x +18.015y=56    [tex]\rightarrow(2)[/tex]

now two equations with two unknowns. Use equation (1)

x=0.270 ×  (x +y)

0.730x=0.270y

x=[tex]\frac{0.270}{0.730}y[/tex]

Plug this into equation (2)

32.042 ([tex]\frac{0.270}{0.730}y[/tex] ) +18.015y=56

11.85y + 18.015y =56

y=[tex]\frac{56}{11.85+18.015}=1.875[/tex]  

This will give you

[tex]x=\frac{0.270}{0.730} \times1.875=0.6935[/tex]

Use the molar masses of the two species to convert the number of moles to grams

0.6935 × 32.0412 =22.2g [tex]Ch_3Oh[/tex]

1.875 × 18.015=33.8g  [tex]H_2O[/tex]

Learn more about methanol

brainly.com/question/24077457

#SPJ4

When a seismic wave passes from the ground into a body of water the waves energy would be absorbed. The correct answer is Option A. Seismic waves move more slowly through a liquid than a solid.

Seismic waves are waves that travel below or over Earth. Explosions, volcanoes and landslides are the reason for the movements of the earth tectonic plates. Seismic waves can be identified by a number of characteristics including the speed the waves travel, the direction that the waves move particles as they pass by, where and where they don't propagate

Learn more about seismic wave here

https://brainly.com/question/26360015

#SPJ1

200.7 g/mol is molecular mass when 0.300 g of an unknown were dissolved in 9.95 g of cyclohexane, a freezing point of depression of 7.51c was measured.

The molecular mass of the unknown solute can be calculated using the relationship between the freezing point depression (ΔTf), the molality of the solution (m), and the freezing point depression constant (Kf) of the solvent. The equation is given as ΔTf = Kf * m, where m is the molality of the solution.

The molality of the solution can be calculated as the number of moles of solute divided by the mass of solvent. The number of moles of solute can be calculated as the mass of the unknown solute divided by its molecular mass.

The mass of the unknown solute is given as 0.300 g and the mass of the solvent is 9.95 g. The freezing point depression constant for cyclohexane is known to be 5.04 °C·kg/mol. Substituting these values into the equation, we get:

7.51 °C = 5.04 °C·kg/mol * m

Solving for m, we get:

m = 7.51 °C / 5.04 °C·kg/mol = 1.49 × 10^-3 mol/kg

Finally, the molecular mass of the unknown solute can be calculated as:

molecular mass = (0.300 g) / (1.49 × 10^-3 mol/kg) = 200.7 g/mol.

Learn more about cyclohexane here:

https://brainly.com/question/17019157

#SPJ4

The IUPAC name of compound is propanoic acid.

The purpose of the IUPAC system of nomenclature is to establish an international standard of naming compounds to facilitate communication.

The goal of the system is to give each structure a unique and unambiguous name, and to correlate each name with a unique and unambiguous.

Alkanes are the family of saturated hydrocarbons, that is, molecules containing carbon and hydrogen connected by single bonds only. These molecules can be in continuous chains (called linear or acyclic), or in rings (called cyclic or alicyclic). The names of alkanes and cycloalkanes are the root names of organic compounds.

Therefore, The IUPAC name of compound is propanoic acid.

To learn more about IUPAC, refer to the link:

https://brainly.com/question/8644699

#SPJ1

The  2.0 ml pipet transfers the 0.10 M stock solution to the 25.0 ml volumetric flask which is then diluted. The molar concentration of the diluted copper solution is 0.008 M.

The initial molar concentration, M₁ = 0.10 M

The initial volume , V₁ = 2.0 mL

The final molar concentration, M₂ = ?

The final volume, V₂ = 25.0 mL

The expression is as follows :

M₁ V₁ = M₂ V₂

M₂ = M₁ V₁ /  V₂

M₂ = (0.10 × 2 ) / 25

M₂ = 0.008 M

Thus, the molar concentration of the diluted copper solution is 0.008 M.

To learn more about concentration here

https://brainly.com/question/20910830

#SPJ4

5.33 moles Liters of gas is 3.21 x 1024 molecules of carbon monoxide.

1 mole contains 6.02×[tex]10^{23}[/tex]

X×6.02×[tex]10^{23}[/tex] = 3.21×[tex]10^{24}[/tex]

X= 3.21×[tex]10^{24}[/tex]/6.02×[tex]10^{23}[/tex] = 0.533×10= 5.33 moles

A molecule is a collection of two or greater atoms held together by attractive forces called chemical bonds; relying on context, the term can also or might not consist of ions that fulfill this criterion.

A molecule may be homonuclear, this is, it includes atoms of one chemical element, e.g. atoms inside the oxygen molecule (O2); or it may be heteronuclear, a chemical compound composed of a couple of detail, e.g. water ( hydrogen atoms and one oxygen atom; H2O). within the kinetic theory of gases, the time period molecule is frequently used for any gaseous particle no matter its composition. This relaxes the requirement that a molecule includes extra atoms because the noble gases are character atoms.

To learn more about Molecules visit here:

brainly.com/question/19922822

#SPJ4

The communication between neurons is accomplished using energy and the type of energy is electricity and chemicals.

Neurons communicate with each other in connections called synapses, a process called synaptic transmission. At a synapse, one neuron sends a message to another cell, the target neuron. Most synapses are chemical. These synapses communicate using chemical messengers. Other synapses are electrical. At these synapses, ions flow directly between cells. Neurons communicate with each other using electrical events called "action potentials" and chemical neurotransmitters. Neurotransmitters are chemical messengers that the body cannot function with. Their job is to send chemical signals ("messages") from one neuron (nerve cell) to the next target cell. The next target cell could be another nerve cell, muscle cell, or gland. Thus, neurons use both electrical charge and chemicals called ions to communicate with each other.

For more information about neurons communication, visit :

https://brainly.com/question/30547134

#SPJ4

The minimum amount of such material that should be shipped in order that 1.0 mg of 55cr is delivered to the laboratory is 70.71 mg.

Half life of any atom is defined as the total time required for half of the original population of radioactive atoms to decay.

Half life = 2.0 hours

By the formula of half-life,

Half life = 0.693/k

Where,

k is rate constant

k = 0.693/2.0

k = 0.3465 hr⁻¹

Formula to find initial concentration is given as,

ln A/A° = -kt

Where,

A is final concentration

A° is initial concentration

t is time

Taking exponential on both sides we get,

A/A° = e^(-kt)

⇒A° = A/e^(-kt)

⇒A° = 70.71 mg

Hence, the minimum amount of such material that should be shipped in order that 1.0 mg of 55cr is delivered to the laboratory is 70.71 mg.

Learn more about half-life from the link given below.

https://brainly.com/question/24710827

#SPJ4

One could incorporate a control experiment using an identical setup but without the gas to confirm that the gas is responsible for the color change.

To verify that the gas is responsible for the color change, a control experiment can be conducted by setting up an identical experiment but without the gas. This would involve placing the same amount of fresh beans in a test tube, adding the same amount of sodium hydroxide solution, and observing the change in color.

If the control experiment does not produce the same results, then it can be concluded that the gas is responsible for the color change. One could also include a test where a different gas, such as carbon dioxide, is added to the experiment and observe if the same color change occurs.

By doing these experiments, one can rule out other factors and prove that the gas is the cause of the change in color.

This question is related to "Lab 9: Cellular Respiration, Experiment 2: Aerobic Respiration in Beans, Post Lab Question."

Learn more about change of color brainly.com/question/1494303

#SPJ4

The difference between the critical angles for red and green light is equal to the difference between the sine of the two angles, or sin(θc, red) - sin(θc, green).

The critical angle is the angle of incidence (angle between the incoming light and the normal to the surface) at which the refracted ray is just grazing the surface and no further refraction occurs. Beyond this angle, the light will start to reflect back into the medium from which it came, and not enter the second medium. The critical angle is determined by the refractive indices of the two media and is dependent on the ratio of their refractive indices.

The critical angle for red light in flint glass surrounded by air is given by the equation sin(θc) = nair/nflint, where nair is the refractive index of air (approximately 1) and nflint is the refractive index of flint glass (1.662 for red light). The critical angle for green light is calculated in the same manner, using the refractive index of flint glass for green light (1.674).

Learn more on critical angle here: https://brainly.com/question/15009181

#SPJ1

Answer:

I agree with the statement that gas particles do not respond to heat the same way people do. Gas particles do not feel the heat in the same way as people do because they are not conscious and do not have a nervous system that allows them to perceive temperature. Instead, the behavior of gas particles is governed by the laws of thermodynamics, which describe how temperature and energy are related to the movement of particles.

For example, when a gas is heated, the particles within it will gain kinetic energy and move more rapidly. This increased motion causes the gas to expand and, if confined, the pressure within the container will increase. This is because the particles are colliding more frequently and with greater force with the container walls. In contrast, when a person is exposed to heat, their body will respond by sweating, which cools the skin by evaporation. The person may also feel uncomfortable or experience other physiological responses to the heat.

Therefore, while both gas particles and people can be affected by heat, their responses are different due to the fundamental differences in their physical and biological properties.

ΔH° for the reaction Fe3O4(s)+2C (graphite) → 3 Fe(s) + 2CO2(g) is - 725kj/mol⁻¹.

Hess's law states that if a process can be showed as the sum of two or more steps, the enthalpy change for the overall process is the sum of the ΔH values for each step.

Fe3O4(s)+2C (graphite) → 3 Fe(s) + 2CO2(g),    

We invert (1) and change the sign of  ΔH

Fe3O4(s)   →  3Fe(s)+3CO2(g)  ΔH = 1118

We multiply (2) by 3

2C(g)+1/2O2(g) → CO2(g)         ΔH = - -394   (2)

3CO(g)+3/2O2(g)→3CO2(g)         ΔH = 1118

We add (1) and (2)

Fe3O4(s)  →  3Fe(s)+3CO2(g)  ΔH = 824.2 kJ

3CO(g)+3/2O2(g)→3CO2(g)         ΔH = -848.1 kJ

Fe3O4(s)+2C (graphite) → 3 Fe(s) + 2CO2(g),    

Therefore, ΔH° = - 725kj/mol⁻¹

Thus,  ΔH° for the reaction Fe3O4(s)+2C (graphite) → 3 Fe(s) + 2CO2(g) is - 725kj/mol⁻¹.

To learn more about the Hess's law, follow the link;

https://brainly.com/question/14561923

#SPJ1

The main site of action of benzodiazepine hypnotics is various GABA receptors present throughout the CNS.

Benzodiazepines are defined as a group of CNS depressants which induces feelings of calm (anxiolysis), drowsiness and sleep. They act by facilitating the binding strength of the inhibitory neurotransmitter GABA at various GABA receptors throughout the CNS.

Generally, the benzodiazepines act by increasing the affinity of the GABA receptor for its ligand, thereby augmenting the inhibitory effect of a given concentration of GABA.

The anxiolytic effects of Benzodiazepines are believed to be mediated through Benzodiazepines receptors which are located in the limbic system, and myorelaxant properties are mediated through α2-containing receptors present in the spinal cord and motor neurons.

Learn more about benzodiazepine hypnotics from the link given below.

https://brainly.com/question/29869299

#SPJ4

No, the balloons filled with different gaseous compounds will not have the same mass. The mass of a gas is dependent on its density, which is a function of its molar mass and its pressure and temperature.    

Different gaseous compounds have different molar masses, and therefore, different densities at a given pressure and temperature. As a result, the mass of a gas depends on the identity of the gas, not just on its volume.For example, if one balloon is filled with hydrogen gas, another with nitrogen gas, and a third with carbon dioxide gas, all at the same pressure and temperature, they will not have the same mass even though they have the same volume. The mass of the hydrogen gas will be the lowest due to its low molar mass, the nitrogen gas will have a higher mass, and the carbon dioxide gas will have the highest mass due to its higher molar mass.

learn more about gaseous compounds here:

https://brainly.com/question/15710581

#SPJ4

The sum of the masses of all substances involved

The number of atoms of each kind

We know that according to the law of the conservation of mass, mass can neither be created or destroyed but can be changed from one form to the other.

This is how we arrive at the general rule that the number of atoms on both sides of the reaction equation would have to be the same for all the atoms that are taking part in the reaction. Thus we can see that the parameters stated above must be the same on both sides.

Learn more about reaction equation:https://brainly.com/question/3588292

#SPJ1

Missing parts;

Which quantity or quantities must always be the same on both sides of a chemical equation? Check all that apply. Check all that apply.

the number of molecules of each kind

the sum of the masses of all substances involved

the number of moles of each kind of molecule

the number of atoms of each kind

The conversion factors to the conversions that they would be used for as follows:

1.moles/grams ⇒ d. mass to mole

2.grams/moles ⇒ a. mole to mass

3.atoms/grams ⇒ e. mass to atom

4.moles/atoms ⇒ c. atoms to mole

5.atoms/moles ⇒ b. moles to atoms

The term mole is defined as the amount of substance of a system which contains as many elementary entities.

One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.

The mole concept can be used to convert between mass and number of particles.

Thus, The conversion factors to the conversions that they would be used for moles/grams ⇒ mass to mole.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

Being a weak acid (Ka = 5.6x104), the nitrous acid reacts with NaOH as follows: NaOH (l) + HNO2 = NaNO2 (aq) + H2O.

A 0.15 m naoh solution is used to titrate 100 ml of 0.15 m nitrous acid (HNO2). The pH of the initial solution is 2.04, 3.85 for the equivalence point, 8.06 for the point at which 80.0 ml of the base has been added, and 11.56 for the point at which 105 ml of the base have been added. There is initially simply a 0.12M HNO2 solution. Like Ka is: Ka is equal to [H+] [NO2]/[HNO2]. When the ions [H+] and [NO2] come from the same equilibrium, [H+] = [NO2] = x, 5.6x10⁻⁴ = X² / 0.15M. 8.4x10⁻⁵ = X². X = [H⁺] = 9.165x10⁻³M. Since pH = -log [H+], pH = 2.04.

Learn more about pH here:

https://brainly.com/question/29816478

#SPJ4

Answer:

Although air is made up of particles too small to be seen, they still contain mass. These particles are made up of molecules which contain atoms that interact with each other and have a certain amount of mass, as well as kinetic energy. The mass of the gases in air can also be determined by measuring the gravitational pull they exert on objects in the atmosphere.

Answer: They are both chemical changes.

Explanation:

The forms of energy are as follows:

Energy, in physics, refers to the capacity for doing work.

Energy exists in many different forms. Examples of these forms are:

Each form of energy can be converted or changed into the other forms.

Learn more about energy at: https://brainly.com/question/1932868

#SPJ1

a) This is a Combustion reaction.

b) The percentage of  yield of this reaction is 51.39%

What is a chemical reaction?

A chemical reaction is the transformation of one or more substances (the reactants) into one or more distinct substances (the products). Chemical elements or chemical compounds make up substances. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.

Given chemical reaction

2 C₂H₂ (g) + 3 O₂ (g) - 2 CO₂ (g) + 2 H₂0

A fuel and an oxidant, typically atmospheric oxygen, engage in a high-temperature exothermic redox chemical reaction known as combustion or burning, which results in the production of oxidized, frequently gaseous products in a mixture known as smoke.

In the given reaction produce a gas that is carbon di oxide and water. Thus it is a Combustion reaction.

The mass of H₂O is (2×2) + 16 = 18 grams.

The mass of water in balanced reaction is (2×18) grams = 36 grams

The formula of percent yield is

%yield = (actual yield/theoretical yield) x 100.

Actual yield = 18. 5 g

Theoretical yield = 36 grams

%yield = (18.5/36) x 100

%yield = 51.39%

To learn more about percent yield, click on the below link:

https://brainly.com/question/24093398

#SPJ4

All organisms require an influx of substances from their habitat to meet their nutritional  needs for chemical elements and energy.

Every organism in the earth needs to meet the basic needs for air, food , water and shelter for their growth. Irrespective of the type of organism and level of development all organisms need an influx of nutrition to their body.

Certain microorganism species are referred to as facultative. These organisms can develop with or without oxygen present. Certain types of bacteria are microaerophilic, which means they can flourish in environments with little oxygen.

The nutrients which are needed in high quantity are called macronutrients. Nutrients which have to be intaken in small quantities or in traces are called micro nutrients or trace nutrients.

Find more on nutrients:

https://brainly.com/question/1268939

#SPJ1