Which metal absorbs the greatest amount of heat energy

Answers

Answer 1

Answer:

This question is incomplete but the completed question is in the attachment below. And the correct is b

Explanation:

Specific heat capacity can be defined as the amount of heat required to raise to raise 1 kg of a substance by 1 kelvin. Thus, this means that when the specific heat capacity of a substance is high, it takes more energy to increase the temperature of that substance. This also means that when different substances are subjected to the same amount of heat, the substance with the higher specific heat capacity will absorb less heat; for example at a beach, water has a very high specific heat capacity, thus when the sand in the beach is hot, the beach water is still relatively cold.

From the description above, it can be seen that the metal with the least specific capacity will absorb the greatest amount of heat, thus the metal is lead with the specific heat capacity of 0.129 J/(g. °C).

Which Metal Absorbs The Greatest Amount Of Heat Energy

Related Questions

1s22s22p63823p64523d104p5s24d105p5
What is the name of the element?

Answers

Answer:

IODINE

Explanation:

 The sublevel notation of the element:

      1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁵

To find this element, we must add the powers of the each of the sublevels. This is the number of electrons in the orbital of the atom.

 2 + 2 + 6 + 2 + 6 + 2 + 10 + 6 + 2 + 10 + 5  = 53

  This give atom has 53 electrons and we can assume it to have an atomic number of 53.

The element is IODINE

What is the total number of electrons in a S2- jon?
1.
10
2.
14
16
4.
18

Answers

the answer is D) 18 electrons

How many moles of H2O are needed to produce 6.3 moles of H2

Answers

Answer:

H2 to O2

H2 to H2O

H20 to O2

H2O to H2

O2 to H20

O2 to H2

Explanation:

Ice melting to become water is an example of a physical change.
True or false

Answers

Answer:

true

Explanation:

After ice melts into liquid water, you can refreeze it into solid ice if the temperature drops. Freezing and melting are physical changes. The substances produced during chemical changes however cannot easily change back into the original substances.

(2 points) How many grams of K2SO4 are present in 25.0 mL of 7.00 % (m/v) solution?
Show your work. No work = no credit.

Answers

Mass of K₂SO₄ : 1.75 g

Further explanation

The concentration of a substance can be expressed in several quantities such as moles, percent (%) weight/volume,), molarity, molality, parts per million (ppm) or mole fraction. The concentration shows the amount of solute in a unit of the amount of solvent.

volume of solution = 25 ml

% (m/v)=7%

mass of K₂SO₄ :

[tex]\tt \%m/v=\dfrac{mass~of~solute}{volume~of~solution}\times 100\%\\\\7\%=\dfrac{mass~K_SO_4}{25}\times 100\%\\\\mass~K_2SO_4=7\times 25\div 100=1.75~g[/tex]

Read the volume of the fluid of the graduated cylinder above. Note that each interval is equal to 0.2ml

Answers

The volume of the liquid = 8.7 ml

Further explanation

Graduated cylinder is a laboratory tool used to measure the volume of liquid

Also called a measuring cylinder

Each line (marked line) on this cylinder shows a scale that shows the total volume of water.

The reading is based on a curve of the fluid formed called the meniscus. Read the measurement of the amount of fluid at the bottom of the meniscus (the position of our eyes is parallel to the level of the meniscus and the cylinder is located in a flat (not tilted) place

If we look at the picture (attached), the meniscus is located between the scale / line 8.6 and 8.8(interval 0.2 ml), so the volume of the liquid shows the number 8.7 ml

According to Graham’s law, the rate of effusion of a gas is inversely proportional to

A.
the pressure of the gas.
B.
the kinetic energy of the particles.
C.
the square root of the mass of the particles.
D.
the square root of the diffusion of the gas in another gas.

Answers

C.  the square root of the mass of the particles.

Further explanation  

Graham's law: the rate of effusion of a gas is inversely proportional to the square root of its molar masses or  

the effusion rates of two gases = the square root of the inverse of their molar masses:  

[tex]\rm \dfrac{r_1}{r_2}=\sqrt{\dfrac{M_2}{M_1} }[/tex]

or  

[tex]\rm M_1\times r_1^2=M_2\times r_2^2[/tex]

From this equation shows that the greater the mass of the gas, the smaller the effusion rate of the gas and vice versa, the smaller the mass of the gas, the greater the effusion velocity.

So if both gases are at the same temperature and pressure, the above formula can apply

Peat, which is formed when decayed moss is compressed over time, is used for which purpose?

A.Medicine
B.Shampoo
C.Fuel
D.Makeup

(PLEASE HURRY IM GETTING TIMED)

Answers

It’s A I think I hope it’s right for youu!

Answer:

answer is c or fuel

Explanation:

12. Calculate the no of molecules in:
34g of ammonia molecules, NH3

Answers

Answer:

1.2 × 10²⁴ molecules NH₃

General Formulas and Concepts:

Chemistry

Reading a Periodic TableAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Dimensional Analysis

Explanation:

Step 1: Define

34 grams NH₃

Step 2: Define conversions

Avogadro's Number

Molar Mass of N - 14.01 g/mol

Molar Mass of H - 1.01 g/mol

Molar Mass of NH₃ - 14.01 + 3(1.01) = 17.04 g/mol

Step 3: Convert

[tex]34 \ g \ NH_3(\frac{1 \ mol \ NH_3}{17.04 \ g \ NH_3} )(\frac{6.022 \cdot 10^{23} \ molecules \ NH_3}{1 \ mol \ NH_3} )[/tex] = 1.20157 × 10²⁴ molecules NH₃

Step 4: Check

We are given 2 sig figs. Follow sig fig rules.

1.20157 × 10²⁴ molecules NH₃ ≈ 1.2 × 10²⁴ molecules NH₃

Based on the information above, which statement provides evidence that a chemical reaction has occurred?






Products release more energy than reactants

Reactants form from the atoms that make up products

There are more atoms in the products than in the reactants

Atoms that make up reactants rearrange into new products

Answers

Answer: Atoms that make up reactants rearrange into new products

Explanation:

A chemical reaction is the process of breaking down the chemical bonds of the reacting substances  which are commonly called as reactants and making new bonds to form new substances commonly called as products.

The products will contain the same atoms as there are in the reactants but the bonds will rearrange to form different substances.

Every chemical reaction is accompanied with absorption or release of energy.

Calculate the final temperature when 50.0 mL of water at 65.0 °C are added to 25 mL of water at 25.0 °C.

Answers

Answer:

x=51.66

Explanation:

1 ml = 1 gram

(mass) (Δt) (Cp) = (mass) (Δt) (Cp)

Substituting values into the above, we then have:

(25)(25-x)(4.184)=(50)(x-65)(4.18)

Solve for x

x= 51.6667

The final temperature is "51.67°C".

According to the question,

At 65°C,

= [tex]\frac{50}{50+25}[/tex]

= [tex]\frac{50}{75}[/tex]

= [tex]0.66667[/tex]

At 25°C,

= [tex]\frac{25}{50+25}[/tex]

= [tex]\frac{25}{75}[/tex]

= [tex]0.33333[/tex]

By multiplying the volume fractions, we get

→ [tex]65^{\circ} C\times 0.66667[/tex] = [tex]43.3334^{\circ}C[/tex]

→ [tex]25^{\circ} C\times 0.33333[/tex] = [tex]8.3333325^{\circ} C[/tex]

hence,

The final temperature will be:

= [tex]43.33334+8.333325[/tex]

= [tex]51.6666^{\circ}C[/tex]

or,

= [tex]51.67^{\circ} C[/tex]

Thus the above answer is right.

Learn more:

https://brainly.com/question/13811538

A nitrogen atom in N, should have a
charge of 1-
partial charge 6+.
charge of 0.
partial charge​

Answers

A nitrogen atom in N should have a partial charge of δ- .

hope this helps <3!

why the Modern dry process is preferred to another conventional process? ​

Answers

It can reduce heat loss by heating water. Also plants are based on the dry process, and it’s much better for the environment rather than any other conventional process.

sodium chloride is an ionic compound. Explain the difference in the ability of solid sodium chloride and molten sodium chloride to conduct electricity in terms of their structures. brainly

Answers

Explanation:

Molten sodium chloride is able to conduct electricity due to the presence of free mobile ions in solution or the molten state.

The free mobile ions are the carriers of electricity.

Solid sodium chloride does not have free mobile ions  because the structure is fixed. Particles are not free to move as such. But in the molten state, free ions are able to move in the solution.

Calculate the number of moles of Cl atoms in 1.81×1024 formula units of magnesium chloride, MgCl2.

Answers

Answer:

No. of Cl atom moles = 6.01

How many outer-shell d electrons are there in each of the transition-metal ions?Mn(IV) :Co(III) :Fe(II) :Ni(II) :

Answers

Answer:

Mn(IV): 3 outer-shell d electrons

Co(III): 6 outer-shell d electrons

Fe(II): 6 outer-shell d electrons

Ni(II): 8 outer-shell d electrons

Explanation:

Mn(IV):

The ion is Mn⁴⁺, so it has lost 4 valence electrons. The ground state electronic configuration of Mn is [Ar]3d ⁵ 4s ². When the neutral atom loses 4 electrons, the electronic configuration is [Ar]3d ³.

outer-shell d electrons = 3

Co(III):

The ion is Co³⁺, so it has lost 3 valence electrons. The ground state electronic configuration of Co is [Ar]3d ⁷4s ². When the neutral atom loses 3 electrons, the electronic configuration is [Ar]3d ⁶.

outer-shell d electrons = 6

Fe(II):

The ion is Fe²⁺, so it has lost 2 valence electrons. The ground state electronic configuration of Fe is [Ar]3d ⁶4s ². When the neutral atom loses 2 electrons, the electronic configuration is [Ar]3d ⁶.

outer-shell d electrons = 6

Ni(II):

The ion is Ni²⁺, so it has lost 2 valence electrons. The ground state electronic configuration of Ni is [Ar]3d ⁸4s ². When the neutral atom loses 2 electrons, the electronic configuration is [Ar]3d ⁸.

outer-shell d electrons = 8

The d electron in the outer shell of each of the transition metal are:

Mn(IV): 3 d electrons in the outer shell.

Co(III): 6 d electrons.

Fe(II): 6 d electrons.

Ni(II): 8 d electrons.

What is electronic configuration?

Electronic configuration is the arrangement of the electrons of an atom.

There are subshell s, p, d, f.

The electrons are arranged in these subshells.

Each element has different arrangement of electrons.

Thus, the number of d electron in each of the element is: Mn(IV) :3, Co(III) :6, Fe(II) :6, Ni(II) :8.

Learn more about electronic configuration

https://brainly.com/question/5524513

The molecule NHz contains all single bonds. False or true?​

Answers

Answer:

true

Explanation:

I think that the answer would be true

Not sure what to do here. It says to convert the following into formulas and states in an unbalanced equation. Please help!

Answers

Answer:

Ca2 solid state

H2O liquid state

Ca(OH)2 I believe this would be in solid state

H2 gas state

Explanation:

Which of the following set of atoms has a nonpolar covalent bond?
a. H and P
b. N and C
c. Li and O
d. Cl and Ca

Answers

Answer:

a. H and P

Explanation:

A covalent bond is formed between 2 nonmetals, which share pairs of electrons to complete the octet in their valence shells. The polarity of the bond depends on the difference in electronegativity between both atoms. If ΔEN = 0, the bond is nonpolar. If ΔEN > 0, the bond is polar.

Which of the following set of atoms has a nonpolar covalent bond?

a. H and P . YES. H and P are nonmetals and ΔEN = |EN(H)-EN(P)|=|2.1-2.1|=0.

b. N and C . NO. ΔEN = |EN(N)-EN(C)|=|3.0-2.5|=0.5.

c. Li and O. NO. Li is a metal and O is a nonmetal.

d. Cl and Ca. Ca is a metal and Cl is a nonmetal.

The distance from San Francisco to Los Angeles is approximately 385 miles. 1609 m = 1 mile. How many kilometers is this? Do not enter “kilometers” as part of your answer.

Answers

Answer:

619.465 kilometers

Explanation:

1609 m = 1 mile

so 385 miles is equal to 619465 meters (385 x 1609= 619465)

1000 meters = 1 km

so 619465 meters is 619.465 kilometers

A student who is feeling cold rapidly rubs their hands on their bare arms. What energy transformation is the student using to feel warmer?

A.
mechanical ---> thermal

B.
radiant ---> thermal

C.
thermal ---> chemical

D.
electrical ---> thermal

Answers

Answer:

B

Explanation:

Answer:

B.

radiant ---> thermal

Explanation:

What is the name of the 3 lenses that have different powers of magnification 4x, 10x and 40x

Answers

Answer:

Scanning Objective Lens (4x)

Low Power Objective (10x)

High Power Objective Lens (40x)

Explanation:

A balloon is floating around outside your window. The temperature outside is 39 °C, and the air pressure is 0.800 atm.
Your neighbor, who released the balloon, tells you that he filled it with 4.70 moles of gas. What is the volume of gas inside
this balloon?
Express your answer numerically in liters.

Answers

Answer:

V = 150.49 L

Explanation:

Given data:

Pressure = 0.800 atm

Temperature = 39 °C (39+273 = 312 K)

Moles of gas = 4.70 mol

Volume of gas = ?

Solution:

Formula:

PV = nRT

V = nRT/P

V = 4.70 mol × 0.0821 atm.L/mol.K ×  312 K  / 0.800 atm

V = 120.39 atm.L/  / 0.800 atm

V = 150.49 L

How do scientists define temperature

Answers

Answer:

Scientists define temperature with certain rules like the measure of the ability of a substance, or more generally of any physical system, to transfer heat energy to another physical system. The temperature of a substance is closely related to the average kinetic energy of its molecules.

Explanation:

Scientists define temperature as a measure of the average kinetic energy of the particles in a substance. In simpler terms, it reflects how fast the particles are moving within a material.

When an object is heated, its particles gain kinetic energy, leading to an increase in temperature. On the other hand, cooling reduces the average kinetic energy and results in a decrease in temperature.

Temperature is typically measured using various scales, such as Celsius, Fahrenheit, and Kelvin. Kelvin is the most commonly used scale in scientific applications since it is an absolute temperature scale, starting from absolute zero, where particles have minimal kinetic energy.

Learn more about Temperature, here:

https://brainly.com/question/7510619

#SPJ6

A student determines that the number of moles in a sample of Al2O3 is 8.3 moles. How many grams are in the sample?

Answers

Mass : 846.268 g

Further explanation

The mole is the number of particles contained in a substance

1 mol = 6.02.10²³

Moles can also be determined from the amount of substance mass and its molar mass

[tex]\tt mol=\dfrac{mass}{MW}[/tex]  

mass of Al₂O₃ :

MW 101,96 g/mol

mass=mole x MW

[tex]\tt 8.3\times 101.96=846.268~g[/tex]

Using the periodic table, choose the more reactive nonmetal.
Si or N

Answers

The answer to this question is sí

Answer:

si

Explanation:

#45 State whether the following sets of quantum numbers are valid. If the set of quantum numbers aren’t valid, indicate why.Indicate what orbital the electron is in regardless of whether the numbers are valid or not.
n = 3 l = 3 ml= 0 ms= +1/2
n = 2 l = 1 ml= -1 ms= -1/2
n = 3l = 0 ml= 1 ms= +1/2
#46 Give the “COMPLETE” electron configuration for antimony. Is it paramagnetic or diamagnetic? If there are unpaired electrons, indicate how many.

Answers

Answer:

(a) "l" cant be more than n-1.  n= 3 so l cant be more than 2.

(b) Valid

(c) If l=0, ml can only be 0.

Sb, Antimony, 51 electrons

1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p3

paramagnetic 3 unpaired electrons

Explanation:

(a) "l" (lower case L) can be 0, 1, 2 up to n-1.  If n=3, l can be 0, 1, or 2.

(b) This set of quantum numbers is valid.  n can be 1, 2, 3, ...

since n= 2, l can be any number from 0 to n-1 or 0,1

Since l=1, ml can be -1, 0, 1

ms can always be +1/2 or -1/2

(c) ml can only be from -l to +l.  If l=0, ml=0.

If l was 2, ml could be -2, -1, 0, 1, 2

The highpoint of a wave is called a

Answers

Answer:

crest

Explanation:

The high point of a wave is called the crest

One mole of an atom of a substance is equal to the:
a Gram atomic mass of the element
b Gram molecular mass of the element
C Atomic number of the element
d None of the above

Answers

B bc I did the test and I got it correct

One mole of an atom of a substance is equal to the  gram molecular mass of the element. Therefore, the correct option is option B among all the given options.

What is mole?

A mole is just a measuring scale. In reality, it's one of the International System of Units' seven foundation units (SI). When already-existing units are insufficient, new ones are created. The levels at which chemical reactions frequently occur exclude the use of grams, yet utilizing actual numbers of atoms, molecules, or ions would also be unclear.

A mole consists of precisely 6.022140761023 particles. The "particles" might be anything, from tiny things like electrons and atoms to enormous things like stars or elephants. One mole of an atom of a substance is equal to the  gram molecular mass of the element.

Therefore, the correct option is option B among all the given options.

To learn more about mole, here:

https://brainly.com/question/15209553

#SPJ6

what characteristics are shared by elements in the same period row?

Answers

Answer:

Elements in the same period have the same number of electron shells.

Explanation:

elements gain electrons and protons and become less metallic

Other Questions
The parameters of a waiting line system include all of the following except: a. service time.b. cost of capacity.c. queue discipline.d. arrival rates. Can someone help me like please does anyone know what the answer to this is What are the results if you fail to turn the Bucky on? Which constellation is connected with lines in the picture? what is the distance between the points (0,-7) and (0, -1) Solve the following inequality -3m + 18 < 30 A contractor brought 10.8 ft^2 of sheet metal. She has used 3.7 ft^2 so far and has $127.80 worth of sheet metal remaining. The equation 10.8x-3.7x=127.8 represents how much sheet metal is remaining and the cost of the remaining amount. How much does sheet metal cost per square foot? Read the passage below. Earth and Mars are known as terrestrial planets because they are both made up of rock and metal. However, scientists know much more about the internal structure of Earth than they know about the internal structure of Mars. What is the effect of the comparison signal word "both? A. It signals that Earth and Mars have something in common. B. It signals that Earth and Mars are different from one another. C. It signals that scientists studied Earth before studying Mars. D. It signals that more facts about Earth and Mars are coming. The Civil War inspired a number of enslaved people to A. join the Confederate military. B. escape to Northern states. C. take jobs as factory workers. D. work as spies for the Union. Is this right?????????????? Find the equation of the line that passes through the points (4,1) and (-4, -5)A. y = 4x + 1B. y = -4x - 5C. y = 3/4 x -2D. y = -3/4 x + 2 What is most likely the author's reason for telling the reader that, "not being a Mandevillian," he/she may not appreciate or understand certain aspects of the story? Answer choices for the above question A. To present the story as gossip from a source who knows the characters and setting. B. To reveal Mandeville as an odd, confusing place. C. To condescend to the reader and make him/her/them feel like a fool who needs everything explained. D. To emphasize how foreign Mercer is. Can someone help me with these Which is an equivalent expression?17x (1 + y)17x (1 2y)17x (1 y)17x (1 + 2y) Phaethon meets his death because...A) He wants to reunite with his father.B) He was to prideful and wanted to show Eupaphus he was betterC) He tries to save Eupaphus from destroying the worldD) Apollo killed him Hi Guys please help me I dont understand three ratios that are equivalent to 11:111:111, colon, 1. what do historical maps show John puts the base of a 13 foot ladder 4 feet from the wall of his house. How far up the wall does the ladder reach? Round your answer to two decimal places.