Answers
Answer:
B. Landscape B
Explanation:
Shale is fine sediment pressed together to form rock.
Sandstone is larger (sand-grain-sized) sediment cemented together to form rock.
Shale erodes faster, as evidenced by the second attachment. That attachment shows erosion of a rock face consisting of interbedded shale and sandstone. The shale has receded significantly, leaving the sandstone layers with space between them.
Related Questions
An insulating plastic rod is charged by rubbing it with a wool cloth, and then brought to an initially neutral conducting metallic sphere sitting on an insulating stand. The rod touches the sphere for a few seconds, and then is separated from the sphere by a small distance. After the rod is separated, the rod:_____
A) is repelled by the sphere.
B) is attracted to the sphere.
C) feels no force due to the sphere.
Answers
Answer:
A) is repelled by the sphere.
Explanation:
When a charged insulated rod is touched with an insulated conducting sphere , some charge on the rod gets transferred to the sphere . So they become similarly charged . We all know that there is repulsion when two similarly charged object are brought near to each other . Hence here too there will be repulsion between the rod and the sphere when the rod is brought near the sphere.
Why will a change in velocity have a greater affect on KE than a change in mass?
Answers
Answer: the answer is corect of what everone else said
Explanation:
What an athlete do to increase his stability when he lands on the balance beam from a flip?
Answers
Answer:
A series of body movements in which a person leaps into the air and then rotates one or more times while airborne is referred to as a flip.
When an athlete flips and lands on the beam, to increase his or her balance, he or she must spread out their hands-on either sides.
In doing this, they redistribute their forces (centre of gravity) to gain equilibrium create inertia to dampen the kinetic energy during the flip.
Cheers!
Humans living in highly populated areas are more inclined to
a. violence
b. socially isolate
C.appetite loss
d. all of the above
Answers
Answer:
they're more inclined to be violent so A
4. What is anti node?
Answers
Answer:
The position of maximum displacement in a standing wave system.
A 3.1 kg ball is thrown straight upward with a speed of 18.2 m/s. Use conservation of energy to calculate the maximum height the ball can reach.
Answers
Answer:
h = 16.9 m
Explanation:
When a ball is thrown upward, its velocity gradually decreases, until it stops for a moment, when it reaches the maximum height, while its height increases. Thus, the law conservation of energy states in this case, that:
Kinetic Energy Lost by Ball = Potential Energy Gained by Ball
(0.5)m(Vf² - Vi²) = mgh
h = (0.5)(Vf² - Vi²)/g
where,
Vf = Final Speed of Ball = 0 m/s (Since, ball stops for a moment at highest point)
Vi = Initial Speed of Ball = 18.2 m/s
g = acceleration due to gravity = - 9.8 m/s² ( negative for upward motion)
h = maximum height the ball can reach = ?
Therefore, using values in the equation, we get:
h = (0.5)[(0 m/s)² - (18.2 m/s)²]/(-9.8 m/s²)
h = 16.9 m
How does the periodic table organize atoms of elements with the same number of valence electrons?
1.in cells
2.in columns
3.in diagonals
4.in rows
Answers
Answer:
2.in columns
Explanation:
The elements of the periodic table is distribute as in 7 periods and 18 groups. The element is distribute on base on increasing atomic number. The period is called horizontal row and the group is called vertical column. in periodic number of sphere around the nucleus remain the same, but as we move from left to right, the valence electrons continue to increase.so correct option is 2.in columns
A professor sits at rest on a stool that can rotate without friction. The rotational inertia of the professor-stool system is 4.1 kg · m2 . A student tosses a 1.5-kg mass with a speed of 2.7 m/s to the professor, who catches it at a distance of 0.40 m from the axis of rotation. What is the resulting angular speed of the professor and the stool? (Assume that when the professor catches the mass, their arm is extended along a line radially outward from the axis of rotation, and the velocity of the mass is perpendicular to that line.)
Answers
Answer:
[tex]\omega=0.37 [rad/s][/tex]
Explanation:
We can use the conservation of the angular momentum.
[tex]L=mvR[/tex]
[tex]I\omega=mvR[/tex]
Now the Inertia is I(professor_stool) plus mR², that is the momentum inertia of a hoop about central axis.
So we will have:
[tex](I_{proffesor - stool}+mR^{2})\omega=mvR[/tex]
Now, we just need to solve it for ω.
[tex]\omega=\frac{mvR}{I_{proffesor-stool}+mR^{2}}[/tex]
[tex]\omega=\frac{1.5*2.7*0.4}{4.1+1.5*0.4^{2}}[/tex]
[tex]\omega=0.37 [rad/s][/tex]
I hope it helps you!
A Ferris wheel has a 40-foot radius and the center of the Ferris wheel is 48 feet above the ground. The Ferris wheel rotates in the CCW direction at a constant angular speed of 2 radians per minute. Enrique boards the Ferris wheel at the 3-o'clock position and rides the Ferris wheel for many rotations. Let t represent the number of minutes since the ride started.
Write an expression (in terms of t ) to represent the number of radians Enrique has swept out from the 3-o'clock position since the ride started.
Answers
Answer:
[tex]\theta=\frac{\pi}{4}+2\frac{rad}{s}t[/tex]
Explanation:
To find the expression in terms of time t you take into account the following equation for the angular distance traveled by an object with angular acceleration w and initial angular position θo:
[tex]\theta=\theta_o+\omega t+\frac{1}{2}\alpha t^2[/tex] ( 1 )
α is the angular acceleration, but in this case you have a circular motion with constant angular speed, then α = 0 rad/s^2. θo is the initial angular position, the information of the question establishes that Enrique is at 3-o'clock. This position can be taken, in radian, as π/4 (for 12-o'clock = 0 rads).
The angular speed is:
[tex]\omega=2\frac{rad}{min}[/tex]
You replace the values of θo, α and w in the equation ( 1 ):
[tex]\theta=\frac{\pi}{4}+2\frac{rad}{s}t[/tex]
Furthermore, the arc length is:
[tex]s=r\theta=(40ft)[\frac{\pi}{4}+2\frac{rad}{s}t][/tex]
A student standing on a cliff that is a vertical height d = 8.0 m above the level ground throws a stone with velocity v0 = 15 m/s at an angle θ = 31 ° below horizontal. The stone moves without air resistance; use a Cartesian coordinate system with the origin at the stone's initial position.
Required:
With what speed, vf in meters per second, does the stone strike the ground?
Answers
Answer:
The stone strikes the ground in 14.72m/sExplanation:
The initial vertical velocity of the stone is given by:
Vyo= VSin theta
Given: V = 15m/s , theta = 31°
Vyo = 15 Sin 31
Vyo = 7.73m/s
Final vertical velocity, Vf can be determined by using kinematic equation
Vf^2 - U^2 = 2as
Vf^2 -( 7.73)^2 = 2(9.8×(-8))
Vf^2 = 59.75 + 156.8
Vf^2 = 216.6
Vf = sqrt(216.46)
Vf = 14.72m/s
Therefore,The stone strikes the ground in 14.72m/s
A spring with a 6-kg mass and a damping constant 7 can be held stretched 0.5 meters beyond its natural length by a force of 1.5 newtons. Suppose the spring is stretched 1 meters beyond its natural length and then released with zero velocity, In the notation of the text, what is the value c2−4mk? m2kg2/sec2 Find the position of the mass, in meters, after t seconds. Your answer should be a function of the variable t with the general form c1eαtcos(βt)+c2eγtsin(δt)
Answers
Answer:
The value for [tex]c^2 - 4mk[/tex] is : [tex]\mathbf{-23 \ m^2kg^2/sec^2}[/tex]
The position of the mass (m) after t seconds is:
[tex]\mathbf{x(t) = e^{\frac{1}{2}t }( cos \frac{\sqrt{36}}{12}t + \frac{6}{\sqrt{36}} sin \frac{\sqrt{36}}{12}t)}[/tex]
Explanation:
The spring constant is :
[tex]F = kx \\ \\ k = \frac{F}{x} \\ \\ k = \frac{1.5}{0.5} \\ \\ k = 3 \ N/m[/tex]
The value for [tex]c^2 - 4mk[/tex] is :
= [tex]7^2 - 4(6)(3)[/tex]
= [tex]49 - 27[/tex]
= [tex]\mathbf{-23 \ m^2kg^2/sec^2}[/tex]
The differential equation for this system is :
[tex]m \frac{d^2x}{dt^2}+c \frac{dx}{dt}+kx = 0[/tex]
[tex]6 \frac{d^2x}{dt^2}+7\frac{dx}{dt}+3x = 0[/tex]
and the auxiliary equation for this differential equation is :
[tex]6m ^2+ 6m + 3 = 0[/tex]
using the quadratic formula :
[tex]\frac{-b \pm \sqrt{b^2 - 4ac} }{2a}[/tex]
[tex]\frac{-6 \pm \sqrt{6^2 - 4(6)(3)} }{2(6)}[/tex]
= [tex]\frac{-6 \pm \sqrt{-36} }{12}[/tex]
= [tex]-\frac{1}{2} \pm \frac{\sqrt{36} }{12}i[/tex]
The general solution is :
[tex]x(t) = e^{-\frac{1}{2}t}}(c_1 cos {\frac{\sqrt{36} }{12}} t + c_2 sin \frac{\sqrt{36} }{12} t})[/tex]
Initial conditions : [tex]x(0) = 1 \ m , x' (0) = 0\\[/tex]
[tex]x(0) = ( c_1 cos 0 + c_2 sin 0)[/tex]
[tex]1 = c_1[/tex]
[tex]x't = e^{- \frac{1}{2}t}}}(- c_1 \frac{\sqrt{36} }{12} sin \frac{\sqrt{36} }{12}t + c_2 \frac{\sqrt{36} }{12} cos \frac{\sqrt{36} }{12}t) - e^{- \frac{1}{2}t}}} (\frac{1}{2}) (c_1cos \frac{\sqrt{36} }{12} t +c_2 sin \frac{\sqrt{36} }{12} t)[/tex]
[tex]x'(0)= e^{- \frac{1}{2}t}}}(- c_1 \frac{\sqrt{36} }{12} sin0 + c_2 \frac{\sqrt{36} }{12} cos 0) - e^{- \frac{1}{2}t}}} (\frac{1}{2}) (c_10+c_2 sin0)[/tex]
[tex]x'(0) = c_2 \frac{\sqrt{36} }{12}-c_1 \frac{1}{2}[/tex]
replacing 1 for [tex]c_1[/tex]
[tex]0 = c_2 \frac{\sqrt{36} }{12} -\frac{1}{2}[/tex]
[tex]c_2 \frac{\sqrt{36} }{12} = \frac{1}{2}[/tex]
[tex]c_2 = \frac{6}{\sqrt{36} }[/tex]
The position of the mass (m) after t seconds is:
[tex]\mathbf{x(t) = e^{\frac{1}{2}t }( cos \frac{\sqrt{36}}{12}t + \frac{6}{\sqrt{36}} sin \frac{\sqrt{36}}{12}t)}[/tex]
A large truck and a small car are moving at the same speed. The truck has a greater kinetic energy because its _________ is greater
Answers
Answer:
The answer is mass .
Explanation:
The kinetic energy formula is :
[tex]k.e = \frac{1}{2} m {v}^{2} [/tex]
So if the mass is higher, the kinetic energy gained is higher .
If a large truck and a small car are moving at the same speed. The truck has greater kinetic energy because its mass is greater, as the kinetic energy of a body depends on the mass as well as the speed of the object.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.
The kinetic energy of the Truck is given by the expression,
K.E= 1/2*m*v²
Where K.E is the kinetic energy of the object
m is the mass of the truck
v is the velocity of the truck
Since the speed is the same for both cars and the truck has greater kinetic energy because its mass is greater.
To learn more about mechanical energy here, refer to the link;
brainly.com/question/12319302
#SPJ2
I Science Sem 1
1 7.1.2 Exam: Semester 1 Exam
Question 18 of 30
3 Points
How much force is required in Newtons) to accelerate a 12-kg bicycle, along
with its 50-kg rider, at 2 m/s2?
Give your answer as a number.
Answer here
Answers
Answer:
Force, F = 124 N
Explanation:
We have,
Mass of bicycle is 12 kg and mass of rider is 50 kg
Total mass of the system is 12 kg + 50 kg = 62 kg
Acceleration of the system is 2 m/s²
It is required to find the force required to accelerate the system. The force acting on an object is given by :
[tex]F=ma\\\\F=62\ kg\times 2\ m/s^2\\\\F=124\ N[/tex]
So, the force of 124 N is acting on the system.
What is the kinetic energy of a 633.0-kg car moving at a speed of 11.2 m/s?
Answers
Answer:
39.7 kJ
Explanation:
The kinetic energy formula applies:
KE = (1/2)mv^2 = (1/2)(633.0 kg)(11.2 m/s)^2 = 39,701.76 J
The kinetic energy is about 39.7 kJ.
An object sits at rest at some position to the left of the origin. Draw what you expect the position vs time, velocity vs time, and acceleration vs time graphs to look like.
Answers
Answer:
see below
Explanation:
The position graph will be a horizontal line (of constant position) located at the negative value representing the position to the left of the origin.
The velocity graph will be a horizontal line at 0, since the object is at rest.
The acceleration graph will be a horizontal line at 0, since the object's velocity is not changing.
TIME REMAINING
58:50
Shelly tells a friend that her computer needs to be fixed because it has been producing a lot of heat and is smoking. Where
is the error in her statement?
• Heat cannot be described as having been produced.
Thermal energy cannot be produced by electronics.
Her computer should be producing a lot of heat and does not need to be fixed.
Her computer is producing thermal energy, not heat.
Mark this and return
Save and Exit
Next
Submit
Answers
Answer:
Her computer is producing thermal energy, not heat.
Explanation:
Answer:
Her computer is producing thermal energy,not heat
Explanation:
Throughout the reflection, make sure you have a copy of the Student Guide, PDF or Word, and your data tables. Use the drop-down menus to complete the statements.
This activity was a multistep laboratory. Think about each step and identify the variables.
In all three parts, the dependent variable was .
The independent variable is the one that the scientist intentionally manipulates. In Part I involving the golf ball and table tennis ball, the independent variable was .
In Part II involving the inflated and deflated footballs, the independent variable was .
In Part III involving the baseball, the independent variable was .
Answers
Answer:
-In all three parts, the dependent variable was density.
-The independent variable is the one that the scientist intentionally manipulates. In Part I involving the golf ball and table tennis ball, the independent variable was mass.
-In Part II involving the inflated and deflated footballs, the independent variable was volume.
-In Part III involving the baseball, the independent variable was material.
Explanation:
correct on edge! hope it helps :)
Answers:
in all three parts, the dependent variable was. density
The independent variable is the one that the scientist intentionally manipulates. In Part I involving the golf ball and table tennis ball, the independent variable was. mass
In Part II involving the inflated and deflated footballs, the independent variable was. volume
In Part III involving the baseball, the independent variable was .material
Explanation:
descibe a transferwave
Answers
Answer: I think you meant transverse wave. A transverse wave is a moving wave whose oscillations are perpendicular to the direction of the wave or path of propagation. A simple example is given by the waves that can be created on a horizontal length of string by anchoring one end and moving the other end up and down.
Please rate 5 stars and vote as brainliest:)
(^o^)(^o^)(^o^)(^o^)(^o^)(^o^)(^o^)(^o^)(^o^)(^o^)
In this example we will see how a transformer can be used to change the voltage output of a wall receptacle. A friend returns from Europe with a device that she claims to be the world's greatest coffee maker. Unfortunately, it was designed to operate from a 240 V line, standard in Europe. At this rms voltage, the coffee draws 1500 W of power. (a) If your friend wants to operate the coffee maker in the United States, where the rms line voltage is 120 V, what turns ratio does her transformer need to have for the coffee maker to work
Answers
Answer:
Explanation:
In order to use a device rated for use in 240 volt for use in 120 V , we have to use a step down transformer . In step down transformer no of turn in secondary coil is less than that in primary coil .
For transformer the relation is as follows
V₂ / V₁ = N₂ / N₁ = turn ratio
Where V₂ and V₁ are volts in secondary and primary coil and N₂ and N₁ is no of turns in secondary and primary coil.
Here V₂ = 120V , V₁ = 240 V
turn ratio = N₂ / N₁ = V₂ / V₁ = 120 / 240 = .5
turn ratio = .5 .
Fill in the word that completes each statement.
Current cannot flow through a circuit when the switch is
Current flows through a circuit and all of the bulbs are lit only when the switch is
Answers
Answer:
Current cannot flow through a circuit when the switch is OPENCurrent flows through a circuit and all of the bulbs are lit only when the Switch is CLOSEExplanation:
In a series connected electrical circuit as also seen in all electrical Circuit the switch allows the flow of Electricity through out the circuit therefore causing the lighting of bulbs and also other electrical appliances to receive electricity.
When the switch is Open the flow of electricity in the circuit is disrupted while when the Switch is closed it allows the flow of electricity seamlessly through out the circuit. there are different types of switches but the most important is the MAIN SWITCH because it is used to shutoff electricity completely from the entire circuit during emergencies or repairs.
Answer:
Current cannot flow through a circuit when the switch is OPEN
Current flows through a circuit and all of the bulbs are lit only when the switch is CLOSED
Explanation:
Which of the following statement(s) is
true about clipper circuits
Select one:
O a. It converts a.c to d.c always
O b. The output is clipped of some
portion of input signal
O c. It converts d.c to a.c
O d. None of these
Answers
Answer:
Explanation:
A rectifier is an electrical device that converts alternating current (AC) to direct current (DC), a process known as rectification. Rectifiers have many uses including as components of power supplies and as amplitude modulation detectors (envelope detectors) of radio signals. Rectifiers are most commonly made using solid state diodes but other type of components can be used when very high voltages or currents are involved. When only a single diode is used to rectify AC (by blocking the negative or positive portion of the waveform), the difference between the term diode and the term rectifier is simply one of usage. The term rectifier describes a diode that is being used to convert AC to DC. Most rectifier circuits contain a number of diodes in a specific arrangement to more efficiently convert AC power to DC power than is possible with only a single diode.
What do you think are the key consideration for machining parts and joints when designing self-assembly furniture like what you see in Ikea?
Answers
Answer:
then, that IKEA would be the authority on flat-pack ... Hardware for the Hopen Bed, via Swedish Furniture Parts.
Explanation:
A living thing that has a irregular shape is
Answers
Answer:
Amoeba
Explanation:
You may say that the shape appears irregular. Infact, Amoeba has no definite shape, unlike other organisms. It keeps on changing its shape.
Which multiplier does the word kilo represent? A. 100 B. 1,000 C. `(1)/(100)` D. `(1)/(10)`
Answers
Answer:
A. 1,000
Explanation:
Kilo is the prefix for thousands, thus, the multiplier that kilo represents is 1,000
A. 1,000
Answer:
B. 1,000
Explanation:
plato
In a certain electronic device, charged particles must make their way through a magnetic field without experiencing any forces. This can be accomplished if
O A. B is perpendicular to v
B. their charges are negative
O c. they move parallel to the magnetic field
OD. the angle between the charges' velocity and the magnetic field is 90°
Answers
Answer:
Se mas clara
Explanation:
What is the linear diameter (in meters) of an object that has an angular diameter of 110 arcseconds and a distance of 25,000 m?
Answers
Answer:
Explanation:
angle θ = 110 arcsec
= 110 /60 arcmin
= 1.8333 arcmin
= 1.8333 / 60 degree
= .030555 degree
= .030555 x π / 180 radian
= 5.33 x 10⁻⁴ radian .
linear diameter = angular diameter in radian x distance
= 5.33 x 10⁻⁴ x 25000
= 13.325 m
linear diameter of object = 13.325 m .
A lightbulb manufacturer makes bulbs with different "color temperatures," meaning that the spectrum of light they emit is similar to a blackbody with that temperature. Assuming the emitting areas of the filaments in two bulbs with color temperatures of 2,000 K and 4,000 K are the same, which of the two is the brighter?
Answers
Answer:
The bulb with higher temperature(4000 K) will be brighter
Explanation:
From the question we are told that
The color temperature for first bulb is [tex]T_1 = 2000K[/tex]
The color temperature for second bulb is [tex]T_2 = 4000K[/tex]
Generally the emission power of black body radiation is mathematically represented as
[tex]E = \sigma T^4[/tex]
Where [tex]\sigma[/tex] is the Stefan-Boltzmann constant with a value [tex]\sigma = 5.67 * 10^{-8} W m^{-2} K^{-4.}[/tex]
Now for [tex]T_1 = 2000K[/tex]
[tex]E_1 = 5.67*10^{-8} * (2000)^4[/tex]
[tex]E_1 = 907.2 \ W/m^2[/tex]
At [tex]T_2 = 4000K[/tex]
[tex]E_2 = 5.67*10^{-8} * 4000[/tex]
[tex]E_2 = 14515.2 \ KW/m^2[/tex]
Looking at the result we got we see that the emission power for the higher temperature bulb is higher, this means that its power to emit in the visible spectrum range would be higher
So the bulb with higher temperature will be brighter
Some students conduct an experiment to find out how long different rubber balls would keep bouncing before they stop, when they dropped from a fixed height. which unit would be the most suitable for measuring the results of their experiment?
A. hours
B. kilograms
C. metres
D. seconds
Answers
ASAP pls answer right and I will mark brainiest
Answers
Answer: question one: i cannot tell Question 2: waxing crescent Question 3: waxing gibbous Question 4: B
Explanation
what bo you nmean by ABC rule ?
Answers
Multiply or divide