[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]
Solutions for Neutralization of Acidic Lakes. ... A common solution to increase water hardness in acid lakes is to add lime, a high-alkalinity calcium compound to the acid lakes. This method is only temporary and very expensive, as it often needs to be applied every year.
Hope it helps uh ✌️✌️
One problem with using pesticides to control insects on crops is that the insects can develop resistance to the chemicals. How is this similar to the overuse of antibiotics?
Answer:
Explanation:
Overuse of antibiotics leads to bacteria's resistance against our drugs. This is increasing at an alarming rate and the reason is that overuse of antibiotics kills bacteria that lack the "resistance" gene or gene that can help them survive the antibiotics (similar is the case for insects that die to insecticides). But, some bacteria can have random mutations in their gene that can help them survive the antibiotic (similar is the case for some insects that can survive the insecticide), thus the surviving bacteria give rise to next generation of bacteria that are resistant to the given antibiotic (similar to how insects that survive the insecticide give birth to new insects that are resistant to insecticide too). Soon, every generation adds new antibiotic resistant bacteria (or new insecticide resistant insects in the case of insects) which is dangerous for all of life on this planet. Therefore, both are similar in the sense that new generations of these organisms will be resistant to our weapons against them.
5.34x10 to the 27th power molecules of sulfur hexafluoride to moles of sulfur hexafluoride
Answer:
8.87 × 10³ moles.
Explanation:
To convert number of molecules of sulfur hexafluoride (SF6) to moles (n), we divide by Avogadro's number (6.02 × 10²³)
That is; n = N ÷ nA
According to the question, 5.34 x 10^27 molecules of SF6 was given in this question. Hence, the number of moles it contains is given as:
n = 5.34 x 10^27 ÷ 6.02 × 10²³
n = 5.34/6.02 × 10^ (27-23)
n = 0.887 × 10⁴
n = 8.87 × 10³ moles.
The general shape that an electron is located within an energy level_____
Answer:
valence
Explanation:
the level of energy electrons have within a general shape the energy level is valence.
The table shows the charge on three unknown subatomic particles.
X positive
Y no charge
Z negative
Which particle is most likely present in the space outside of the nucleus of the atom?
Answer:
Z negative
Explanation:
The negative charge shows that this is an electron. Electrons are present outside the nucleus of the atom and having negative charge. Usually represented by e-
Answer:
Only Z?
Explanation:
Please can someone answer quickly this do tomorrow morning
Which of the five signs should not be used by themselves?
Precipitate
Temperature change
Color change
Odor
Bubbles
Temperature change
Pls corret my answer if its wrong ●~●#CarryOnLearningThe body part of a spirogyra is.............
Answer:
The chloroplasts form a spiral around the vacuole and have specialized bodies known as pyrenoids that store starch. The cell wall consists of an inner layer of cellulose and an outer layer of pectin, which is responsible for the slippery texture of the algae.
Explanation:
The body part of a spirogyra is called pyrenoids .hope it is helpful to you
why atoms of magnet differ from normal atoms?
Copied answers ❌❌❌
Answer:
The magnetic field of an atom, say H (one electron revolving around a proton) is composed of two separate contributions: an orbital magnetic moment and a spin magnetic moment. We get magnetic moments because of electromagnetic induction associated with each type of electron motion. The electron revolving around the proton with a certain angular momentum is related to the associated orbital magnetic moment (and, yes, we model it as a wire loop with current expressed in terms of the orbital velocity). This can be calculated using elementary mechanics. The spin magnetic moment is a little trickier because it is caused by the intrinsic spin of the electron which is a quantum phenomenon; therefore, this spin magnetic moment can only be calculated using quantum mechanics. In the end, we get a certain net magnetic moment associated with this motion of the electron in an atom. It is important to notice that this atom acts as a magnetic dipole (remember, as of yet, magnetic monopoles don't exist!).
If we take a bulk magnet like you might have on your fridge, it would be composed of atoms. Each atom operates as a magnetic dipole, but due to internal atomic structures, the atoms actually align themselves into separate magnetic domains, each with a net magnetic moment (caused my individually adding up those atomic dipole moments). In a common magnet (ferromagnet), these domains all point the same direction and stay that way, creating a permanent bulk magnetic dipole.
So in a way, there is no difference between the magnetic field of an atom and that of a magnet because one is simply a sum of the other, making both magnetic dipoles. Of course, here we see that there's nothing that fundamental about the magnetic force. In reality, the magnetic force is a relativistic effect caused by the movement of a charged particle, making electricity (i.e. charge) the underlying property at work here. Electromagnetic induction is really a shortcut to understand the magnetic force without worrying about relativistic mechanics. If we were to discover magnetic monopoles (i.e. "magnetic" charge), this would re-write a lot that we know about electromagnetism because we couldn't label all magnetic forces as by-products of moving electric charge
Calculate the average atomic mass for element X
Answer:
39.02amu
Explanation:
According to this question, there are four (4) isotopes for element X with the following relative abundance:
Isotope 1 = 9.67%, mass no: 38
Isotope 2 = 78.68%, mass no: 39
Isotope 3 = 11.34%, mass no: 40
Isotope 4 = 0.31%, mass no: 41
To find the average atomic mass of element X, we multiply each isotopes' relative abundance by its mass no and find the sum as follows:
We convert each percentage to decimal abundance:
Isotope 1 = 9.67% = 0.0967
Isotope 2 = 78.68% = 0.7868
Isotope 3 = 11.34% = 0.1134
Isotope 4 = 0.31% = 0.0031
(0.0967 × 38) + (0.7868 × 39) + (0.1134 × 40) + (0.0031 × 41)
3.6746 + 30.6852 + 4.536 + 0.1271
Average atomic mass = 39.02amu
Where would (aq) (s) go in Cr(NO3)3+K3PO4
Answer:
Cr(NO3)3 (aq) +K3PO4 (s)
Explanation:
(Please help)
What is the most common isotope for element X
Answer:
Isotope 2
Explanation:
Isotope 2 is the most abundant. Its percent abundance is 78.68% which is the largest percentage, and therefore the most common of the isotopes presented.
Good luck!
Anthracite coal d) is the most abundant grade of coal e) is very soft and burns at high temperatures a) causes the most air pollution c) is very hard and burns cleanly b) has the highest sulfur content
Answer: The correct option is C ( is very hard and burns cleanly).
Explanation:
COAL is a form of rock that is made up of mostly carbon amongst other elements which includes sulphur, nitrogen, hydrogen and oxygen. There are different types of coal which include:
--> anthracite ( 90% carbon)
--> bituminous coal ( 70-90% carbon)
--> lignite ( 60- 70% carbon) and
--> peat (60 % carbon).
Anthracite is the type of coal that contains the highest carbon content ( 90% carbon). This makes it very hard and is often a times referred to as HARD COAL. Anthracite is a higher quality coal for domestic and open fire heating. This is because it contains less impurities than other type of coal and thereby making it to BURN CLEANLY avoiding atmospheric pollution.
how does liquid carbon dioxide connect to organic chemistry
please I need long answers
if sneezing is the response to smelling food is it conditioned or unconditioned
Answer:
i think its unconditioned response.hope it helpsstay safe healthy and happy.Mike watch 100 m north then watch 30 m south after this he walks another 10 m north what is the magnitude of his total displacement during this walk in meters
Answer:
His total displacement is 80 m northwards
Explanation:
Given;
Mike's first displacement, x₁ = 100 m North
Mike's second displacement, x₂ = 30 m South
Mike's third displacement, x₃ = 10 m North
Let his Northwards direction be positive, and
his Southwards direction be negative
His total displacement = (100 m North) + ( - 30 m South) + (10 m north)
= (100 m + 10m - 30 m)
= 80 m Northwards
2. Find the slope of the line that passes between the points (12,5) and (2,3).
Write your formula for Slope
m=y2 −y1/x2-x1
Explanation:
3-5/2-12=1/5
Describe the energy in natural gas and the way in which it’s converted to electrical energy.
En un estudio de contaminantes, se cuantificó que el martes anterior se tenían 40 ppm de dióxido de carbono en el ambiente estudiado. Mientras que el jueves se reportó que se tenía 0.004% de esa misma sustancia. ¿Cómo se comparan estos valores?
A.
Las concentraciones no pueden compararse debido a que tienen diferentes unidades.
B.
Las concentraciones son iguales, por lo que se deben monitorear las causas en los dos días.
C.
El jueves hay mayor concentración de contaminante, por lo que se deben tomar medidas únicamente para ese día.
D.
El martes hay mayor concentración de contaminante, por lo que se deben tomar medidas únicamente para ese día.
help sdfghrthfbfdve aahhhhhhhh
Help me please I really need this tomorrow
19. place moth balls in the closet and observe after several days.
20. whenever wax or a candle burns it turns from solid to liquid but again at room temperature it turns to solid
21. evaporation, condensation, precipitation
22. it produces new substances
23. vinegar Bubbles when baking soda is added
24. steam
determine the number of oxygen in 1.60 moles of sodium hydrogen phosphate
Answer:
6.40 is the answer to your question
The number of moles of oxygen in 1.60 moles of sodium hydrogen phosphate is 6.4 moles
Let's represent the chemical formula of the compound. The chemical formula of sodium hydrogen phosphate is as follows:
Chemical formula
The chemical formula of a compound is a symbolic expression use to signify the number of atoms present in a molecular substance. Therefore,
sodium hydrogen phosphate = Na₃PO₄
Therefore,
1 mole of Na₃PO₄ = 4 moles of oxygen
1.60 moles of Na₃PO₄ = ? moles of oxygen
cross multiply
number of moles of oxygen = 1.60 × 4
number of moles of oxygen = 6.4 moles
learn more on moles here: https://brainly.com/question/18395277
_______organisma consist of only one cell and _________ organisms consist of many cells
Answer:
Unicellular organisms consist of only one cell and multicellular organisms consist of many cell.
Explanation:
Living things made up of a cell are called unicellular beings. They are very small and simple. In other words, unicellular organisms are those that are formed only by a single cell in which all the vital functions necessary for life are produced. For this reason, they are mostly microscopic organisms. Examples of unicellular organisms are viruses or bacteria.
Multicellular organisms are made up of a large number of cells. They present, therefore, a greater complexity than unicellular organisms in terms of the functions they develop. All current multicellular organisms come from a single cell, that is, they begin their life being unicellular. That is, they are formed from a zygote. Some examples of multicellular organisms are mammals, fungi, and mosses.
So, unicellular organisms consist of only one cell and multicellular organisms consist of many cell.
How can I balance chemical equations by providing the correct coefficients? For example: [?]Pb(NO3)2 + [?]NaCrO4 = [?]PbCrO4 + [?]NaNO3
Answer:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + 2NaNO₃
The coefficients are: 1, 1, 1, 2
Explanation:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + NaNO₃
The above equation can be balance as follow:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + NaNO₃
There are 2 atoms of Na on the left side and 1 atom on the right side. It can be balance by writing 2 before NaNO₃ as shown below:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + 2NaNO₃
Now the equation is balanced.
The coefficients are: 1, 1, 1, 2
Balance the following equation :
Sodium + water sodium hydroxide + hydrogen with steps
Answer:
2Na + 2H2O → 2NaOH + H2
Explanation:
This is the balanced equation of,
Sodium + water → sodium hydroxide + hydrogen
The number of Atoms present in one mole of an element is equal to Avogadro Number. Which One Of the Following contains the greatest number of Atoms? (1)4g He (2)46g Na (3)0.40g Ca (4) 12g He
Answer:
Thus, the element containing the greatest number of atoms is 12 g He. Thus, the correct option is (4) 12 g He. Note: The number of atoms of a compound is Avogadro's number for 1 mole of compound. The number 6.022×1023 is known as Avogadro's number.
Explanation:
(4)✔️ 12 g He
please follow me.
iammallikaAnswer:
120gram I think so this is the answer if the answer is correct plz mark me as brainliest.
Which phrase best describes a Hawaiian eruption?
A. Slow-moving lava flows and explosions of pumice
B. Ash shooting high into the atmosphere
C. Fast-moving lava flows and explosions of cinder
D. Lava fountains and fissure eruptions
Answer:
C.faste-moving lava flows and explosion of cinder
 Help ASAP only right answers only no spam don’t answer if you don’t know
Answer:
NO. 10.
performed experiments
NO. 11.
Inference
Explanation:
No 10.
in order to prove that Mary Mellon was in fact infected by typhoid proper experiments needs to be carried out.
No. 11
inference means an assumption due to the situation.
A 150 j of energy is added to a system that does 50 j of work is done. By how much wiull the internal energy of the system be raised?
Answer:
thnx for the points too muchee
Explanation:
Answer:
3 internal energyExplanation:
[tex]{hope it helps}}[/tex]
What is a rechargeable battery?
a group of electrochemical cells that can be recharged
a group of electrolytic cells that can be recharged
a group of electrochemical cells that do not need recharging
O a group of electrolytic cells that do not need recharging
WILL GIVE BRAINLIEST
Answer:
a group of electrochemical cells that can be recharged
Hematite is a naturally occurring mineral and a common form of iron ore. The following statements describe physical and chemical changes occurring to hematite. Which statement describes a chemical change?
When the hematite particles rearrange to form a new substance", this statement describes chemical change.
What is chemical change ?A chemical change is a change of materials into another, new materials with different properties and one or more than one new substances are formed.
As a chemical changes is usually a change where a substance undergoes a chemical change and forms a new substance; which cannot be easily reversed into reactants by any simple physical methods.
In this example the hematite ore forms a new substance by an irreversible chemical change.
Hence, "The hematite particles rearrange to form a new substance", this statement describes chemical change.
Learn more about chemcial change here ;
https://brainly.com/question/23693316
#SPJ1
How does fluorine (F)differ from iodine(I)
A. Fluorine (F) has 3 more energy shells than iodine (I).
B. Fluorine (F) has 1 less energy shell than iodine (I).
C. Fluorine (F) has 1 more energy shell than iodine (I).
D. Fluorine (F) has 3 less energy shells than iodine (I).
Fluorine (F) and iodine(I) are the halogen elements that belong to group 17. They differ from each other as fluorine has 3 fewer energy shells than iodine. Thus, option D is correct.
What are halogen groups?Halogen is a nonmetallic element that belongs to group 17 and consists of six elements namely fluorine, bromine, tennessine, chlorine, astatine, and iodine.
They are diatomic and have 7 valence electrons in the outer shell, which makes them highly reactive and electronegative. The shielding effect is less in F than I due to the closer placement and attraction of the valence electron to the nucleus.
Fluorine differs from iodine as it has a smaller size with fewer energy shells than iodine. Iodine has five energy shells, whereas fluorine has two energy shells that make the difference of three shells between them.
Therefore, F and I differ from each other.
Learn more about fluorine and iodine here:
https://brainly.com/question/2005537
#SPJ5