Answer:
below sodium but above magnesium
Explanation:
It is necessary to note that only a metal that is above another metal in the activity series can displace it from its compound.
The first statement said that titanium reacts with magnesium oxide. The implication of this is that titanium can displace magnesium from its oxide. This is only possible if titanium is above magnesium in the activity series.
The second statement says that sodium reacts with titanium oxide. This implies that sodium metal can displace titanium from its oxide. For this to occur, then sodium must be above titanium in the activity series of metals. Hence the answer above.
PLEASE I NEED HELP WITH THIS LAST PROJECT!!!!!!
1. How do the physical properties of the slime differ from the physical properties of the glue and borax alone?
2. Stretch the slime slowly. Can you make a sheet thin enough to see through?
3. Form the slime into a roll. What happens if you pull the ends of the roll quickly? What happens if you pull it slowly?
4. Put a clean beaker on a table upside down. Roll the slime into a ball and place it on top of the beaker. Describe what
has happened after 30 minutes.
5. Roll the slime into a ball. Does it bounce?
6. Do some research on polymers. Make a list of 20 items around the house that are composed of polymers. (Hint:
Read labels!)
Answer:
1.Borate ions, provided by the borax (hydrous sodium borate), cause the vinyl molecules in the glue to form cross-linked bonds. The process of cross-linking continues to alter the physical properties of the polymer. As more and more bonds are formed, the characteristics of the polymer change.
2.
If we pull the ends of the roll quickly, it will break.
If we roll the slime into a ball and place it on top of the beaker it slowly flow down.
3.When you pull slowly, your slime will stretch. However if you pull quickly it will break. Slime will slowly flow making it seem like a liquid, but it can also bounce which makes it seem a bit like a solid.
4.If we roll the slime into a ball and place it on top of the beaker it slowly flow down. After 30 minutes, slime will settle and behave as a solid, because water evaporates.
5.Yes, the slime ball will be able to bounce.
6.High Density Polyethylene, HDPE : bottle caps, folding tables and chairs, food storage containers, plastic bags, water pipes for domestic water supply. MDPE : shrink film, carrier bags, screws and enclosures. Linear LDPE : toys, lids, buckets, containers, bubble wrap.
Explanation:
To determine if something is a living organism,
you could check to see if it responds to its
environment.
TRUE
FALSE
Answer:
Yes, it's A) True
If the solubility of sugar at 25ºC is 211 g/100 g H2O, what mass of sugar can be dissolved in 300 g of H2O?
633 g of Sugar
105.5 g of Sugar
422 g of Sugar
844 g of Sugar
Answer:
633 grams of sugar can be dissolved in 300 g of H₂O
Explanation:
Solubility is the measure of the ability of a certain substance to dissolve in another and form a homogeneous system. Solubility is then the maximum amount of a solute that a solvent can receive and is expressed by concentration units.
The rule of three or is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them. That is, what is intended with it is to find the fourth term of a proportion knowing the other three. Remember that proportionality is a constant relationship or ratio between different magnitudes.
If the relationship between the magnitudes is direct, that is, when one magnitude increases, so does the other (or when one magnitude decreases, so does the other) , the direct rule of three must be applied. To solve a direct rule of three, the following formula must be followed:
a ⇒ b
c ⇒ x
Then:
[tex]x=\frac{c*b}{a}[/tex]
You can apply the rule of three as follows: if by definition of solubility in 100 grams of H₂O there are 211 grams of sugar, in 300 g of H₂O how much sugar is there?
[tex]sugar=\frac{300 grams of H_{2}O *211 grams of sugar}{100 grams of H_{2}O}[/tex]
sugar= 633 grams
633 grams of sugar can be dissolved in 300 g of H₂O
Answer:
[tex]X g\ sugar=633 g \ sugar[/tex]
Explanation:
Hello,
In this case, solubility is defined as a condition wherein the amount of a solute has been completely dissolved in a certain amount of solvent and it is temperature-dependent as well. In such a way, for the given solubility at 25 °C, we understand that 211 g of sugar are completely dissolved in 100 g of water, therefore, for 300 g of water, we can compute the completely dissolved mass of sugar by using the following rule of three:
[tex]211g\ sugar \rightarrow 100 g \ water\\\\X g\ sugar \rightarrow 300 g\ water\\\\X g\ sugar =\frac{300g\ water * 211g\ sugar}{100g \ water}\\ \\X g\ sugar=633 g \ sugar[/tex]
Best regards.
A substance that can be broken down and recycled by bacteria and other decomposes is said to be__________
Answer:The substance is Biodegradable
Explanation:
When something is biodegradable it can be broken down by organical processes or decomposers.
Which phrase is the best summery of the model shown?
Which of the following is equal to 0.500 mol?
A. 32.0 g O(2)
B. 103.6 g Pb
C. 36.0 g H(2)O
D. 14.0 g CO(2)
help please
Answer:
B
Explanation:
Think about the molar masses of each.
O2 -> 32 g
So 32 g = 1 mol.
Pb -> 207.2 g
So 103.6 g = .5 mol!
H2O -> 18 g
So 36 g = 2 mol.
CO2 -> 44 g
So 14 g = .3 mol
What is the frequency of an electromagnetic wave that has a wavelength of
7.6 x 10^-6 m in a vacuum? (The speed of light in a vacuum is 3.00 x 10^8
m/s.)
A. 2.3 x 10^3 Hz
B. 1.3 x 10^5 Hz
C. 4.0 x 10^13 Hz
D. 2.5 x 10^-14 Hz
Answer:
D. 2.5 x 10 ^-14 Hz
Explanation:
Use wavelength formula: v = f x wavelength
Rearrange formula for frequency.
f = wavelength / v
f = 7.6 x 10 ^-6 / 3.00 x 10 ^8
f = 2.5 x 10^-14 Hz
What are most conductors made of?
A: Wood
B: Paper
C: Plastic
D: Metal
Answer:
D: Metal
Explanation:
Most conductors are made from metal, for the alloys allow for a "freer" passage way for electrons to pass through.
~
Answer:
D. Metal
Explanation:
hopeee thisss helpss
Which one of the following word equations represents a neutralization reaction? A) salt + water → acid + base C) base + acid → salt + water B) base + salt → water + acid D) salt + acid → base + water
Part B is the correct answer.
When base and acid react, the result is salt and water.
Therefore....
Base+acid = salt+water
2. Can oxidation occur without reduction? Explain.
Answer: Nope
Explanation:
Oxidation occurs because an agent that causes the oxidation---the oxidizing agent---must itself get reduced
During an experiment, Stephanie found 4.5 mg of iron in a 750 g water sample. How many parts per million of iron are in the water sample ?
Answer:
6ppm
Explanation
We'll begin by calculating the concentration of the solution in mg/g. This is illustrated below:
Mass of iron = 4.5mg
Mass of water = 750g
Concentration in mg/g = 4.5/750 = 6×10¯³mg/g.
Now, we can obtain the concentration in ppm as follow:
1mg/g = 1000ppm
Therefore, 6×10¯³mg/g = 6×10¯³ x 1000 = 6ppm.
What mass of potassium chlorate is needed to produce 8.50 mol of oxygen? 2KCIO3 →
2KCl +302
Answer:
694.2915 grams of potassium chlorate is needed to produce 8.50 mol of oxygen
Explanation:
It is possible to apply the following rule of three: if by stoichiometry 3 moles of O₂ are produced by 2 moles of KCIO₃, when reacting 8.5 moles of O₂, how many moles of KClO₃ are necessary?
[tex]moles of KClO_{3} =\frac{8.5moles of O_{2}*2moles of KClO_{3} }{3moles of O_{2}}[/tex]
moles of KClO₃= 5.67
To know the amount of mass present in 5.67 moles of the compound, it is necessary to know the molar mass, that is, the amount of mass that a substance contains in one mole. Being:
K: 39 g/moleCl: 35.45 g/moleO: 16 g/moleThe molar mass of the compound is:
KClO₃= 39 g/mole + 35.45 g/mole + 3* (16 g/mole)= 122.45 g/mole
Then you can apply the following rule of three: if in 1 mole of the compound there are 122.45 grams, in 5.67 moles how much mass is there?
[tex]mass=\frac{5.67 moles*122.45 grams}{1 mole}[/tex]
mass= 694.2915 grams
694.2915 grams of potassium chlorate is needed to produce 8.50 mol of oxygen
Which of the following are more reactive than iron?
Check all that apply.
A. Aluminum
B. Potassium
C. "Gold
D. Silver
Answer:
The answer is A and B.
Explanation:
Using Reactivity Series .
When Luis burns wood in a campfire, the particles in the wood break down and energy is released. What type of energy does the wood contain before Luis burns it?
heat
electrical
chemical
light
Answer:
chemical energy is stored in the wood before combustion.
What happens first during cellular respiration?
A. The movement of small organic molecules into a mitochondrial
B. The breakdown of food molecules into smaller organic molecules
C. The formation of many molecules of ATP
D. The breakdown and small organic molecules into carbon dioxide
Answer:
b
Explanation:
ape ex
During cellular respiration, the first step is the breakdown of food molecules, such as glucose, into smaller organic molecules, specifically in a process called glycolysis. This process occurs in the cytoplasm of the cell and does not require oxygen. The breakdown of glucose results in the formation of two molecules of pyruvate.
After glycolysis, depending on the availability of oxygen, further steps of cellular respiration occur. If oxygen is available, the pyruvate molecules enter the mitochondria, where they undergo further breakdown through processes like the Krebs cycle and oxidative phosphorylation, resulting in the production of ATP (adenosine triphosphate), which is the primary energy currency of the cell.
Therefore, option B, the breakdown of food molecules into smaller organic molecules, is the first step in cellular respiration.
Learn more about glycolysis here:
https://brainly.com/question/26990754
#SPJ 2
Take a look at this dandelion. The yellow flower on the right is _______ pollinated and the seeds on the left are transported by ___________. A) wind; water B) insect; wind C) insect; birds D) animals; water
Answer:
Insect and wind are the correct answer
Explanation:
Just took the test on USA Test Prep
What is the pressure in a 5.00 L tank with 23.50 grams of oxygen gas
at 350 K?
Answer:
not sure I would 41.70
Explanation:
The graph below shows the electronegativities of the elements in the periodic table. A graph with the horizontal axis labeled period and marked with entries from 0 to 6, and a vertical axis labeled Chi p, with entries 0.5 to 4.5 in increments of 0.5. All data are approximate. Group 17 is represented by an orange line, with coordinates 2, 4; 3, 3.75; 4, 3; 5, 2.75. Group 16, dark red: 2, 3.5; 3, 2.5; 4, 3.5; 5, 2.25. Group 15, brown: 2, 3; 3, 2.25; 4, 2.25; 5, 2.25; 6, 2.25. Group 16, light green: 2, 2.5; 3, 2; 4, 2; 5, 2; 6, 2.5. Group 13, dark green: 2, 2; 3, 1.75; 4, 1.75; 5, 1.75; 6, 1.5. Group 2, blue: 2, 1.5; 3, 1.25; 4, 1; , 5, 1; 6, 1. Group 1, purple: 2, 1; 3, 1; 4, 0.9; 5, 0.9; 6, 0.9. Which would least strongly attract electrons from other atoms in a compound? elements of group 1 elements of group 2 elements of group 15 elements of group 17
Answer:
The elements in group one
Explanation:
The elements of group 1 would least strongly attract electrons from other atoms in a compounds.
What is Shielding Effect?The inner electrons shield the outer electrons from the nuclear force thereby reduce the nuclear hold on outermost electrons.What is the Explanation?Generally metals have more tendency to lose the electrons and non metals have more tendency to gain the electronsFor metals it is easier to lose their valence electrons because metals nuclei do not have a strong pull on their valence electrons due to sheilding effectLearn more about shielding effect here
https://brainly.com/question/19068425
#SPJ2
How many ions does each of these symbols have, I need answer and my science teacher doesn’t tell us or explain it to us
Answer: about 14
Explanation:
CAPITAL LETTERS
in a genotype
mean...
Answer:
GENOTYPE IS THE COLLECTION OF GENES RESPONSIBLE FOR THE VARIOUS GENETIC TRAITS OF A GIVEN ORGANISM
Answer:
A capital letter represents the dominant form of a gene (allele),
and a lowercase letter represents the recessive form of the gene (allele).
Hope this helps..
Use the chemical equation below to answer the following two questions.
As(OH)3(aq) + H2SO4(aq) → As2(SO4)3(aq) + H2O(1)
3. When the above equation is balanced, what is the stoichiometric coefficient for As(OH)3?
(a) 1
(b) 2
(C) 3
(d) 4
(e) 5
4. When the above equation is balanced, what is the stoichiometric coefficient for H2O?
(a) 1
(b) 2
(C) 4
(d) 6
(e) 8
what is the oxidation number of sulfur in CaSO3 ( 3 is a subscript)?
Answer:
It’s +6
Explanation:
Oxidation number refers to the total number of electrons gained or lost during a chemical reaction.
In the example above sulphur has an oxidation number of +6 while the oxidation number for the calcium in CaSO4 is +2 the oxidation number for oxygen is -2.
Ascientist is measuring the pressure that is exerted by each of the following gases in the atmosphere: carbon dioxide, oxygen,
and nitrogen. Which term most likely describes what she is measuring?
final pressure
atmospheric pressure
combined pressure
partial pressure
Answer:
Partial pressure
Explanation:
the scientists is measuring different pressure, so it would be partial pressure. Hope that this helps you and have a great day :)
It takes about __________________________ for Earth to rotate one time.
Answer:
24 hours
Explanation:
Therefore we have 24 hours in a day
PLS HELP!! WILL MARK BRAINLIEST TO RIGHT ANSWER!!!
1.If a substance has a large mass and a small volume, what can you conclude about it?
A.It is very dense.
B.It will float on water.
C.It is made out of rock or metal.
D.It has a low density
2. What is the difference between weight and mass?
A.Weight depends on density and mass depends on gravity.
B.Weight depends on gravity and mass depends on volume.
C.Mass depends on gravity and weight is constant.
D.Weight depends on gravity and mass is constant.
3. Which of the following units is rarely, if ever, used in science labs?
A.Centimeter
B.Gram
C.Quart
D.Milliliter
4. One side of a cube is 5 cm long. What is the cube's volume?
A.5 cubic cm
B.15 cubic cm
C.25 cubic cm
D.125 cubic cm
5. What is the best synonym for "property?"
A.Possession
B.Attribute
C.Virtue
D.Quantity
Answer:
1. A) Its very dense
2. D) weight depends on gravity and mass is constant
3. C) Quart
4. D) 125 cubic cm
5. B) Attribute
Explanation:
A pathogen enters an organism and infects it. Which statement best describes the general effect of the infection on the organism? *
A. The organism experiences a disruption in homeostasis.
B. The organism cannot obtain energy.
C. The organism cannot reproduce.
D. The organism experiences uncontrolled cell growth.
Answer:
Option A, The organism experiences a disruption in homeostasis.
Explanation:
When a pathogen enters the organism’s body, it disrupts its homeostasis. There are several receptors in the body that are responsible for maintaining the stability of the body through negative feedback loop.
A foreign element attaches to the surface of these receptors and hence disrupts their attachment with the probable substance necessary for the regulation of essential body function.
Thus, the temperature regulation get s impaired, hormonal imbalances occur, feeding system disturbs etc.
Hence, option A is correct
What is the definition of a Lewis base?
a substance that donates a proton
a substance that donates electrons to form a covalent bond
a substance that accepts electrons to form a covalent bond
a substance that when dissolved in water increases hydrogen ion concentration
Answer:
the definition is : a compound or ionic species which can donate an electron pair to an acceptor compound.
so as far as i know i know the answer is: a substance that accepts electrons to form a covalent bond.
please mark me brainliest may god bless you...
Explanation:
The definition of a Lewis base is: C. a substance that accepts electrons to form a covalent bond.
What is a Lewis base?
A Lewis base can be defined as a specie of an ionic or chemical compound that contains an empty orbital which allows it to donate an electron pair (two or more electrons) to form a covalent bond.
This ultimately implies that, a Lewis base is a chemical substance that accepts an electron pair (two or more electrons) to form a covalent bond.
Examples of a Lewis base.In Chemistry, some examples of a Lewis base include the following:
[tex]OH^-[/tex]CO[tex]H_2O[/tex]ROH[tex]NH_3[/tex]Read more on Lewis base here: https://brainly.com/question/3655338
What would be challenging about life on Mars?
Answer: it would be too hot to live on and hard to get any oxygen from the ground because it doesn’t support life there.
Explanation:
science.
Answer:
On Mars, it is too cold to support life, the only existing water is at it's north and south pole in solid form (ice). It's atmosphere is about 100 times thinner than Earth's so it couldn't hold in any heat anyway.
Raising or lowering temperature. What happens to the pressure? Is this a direct or indirect relationship?
Answer:
Explanation:
The combined gas law states that the pressure of a gas is inversely related to the volume and directly related to the temperature. If temperature is held constant, the equation is reduced to Boyle's law. Therefore, if you decrease the pressure of a fixed amount of gas, its volume will increase.
Ideal gas law is valid only for ideal gas not for vanderwaal gas. To see the relation between pressure and temperature we need ideal gas equation. Pressure is directly proportional to the temperature.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of gas
V= volume of gas
n =number of moles of gas
T =temperature of gas
R = Gas constant = 0.0821 L.atm/K.mol
According to above equation we can see that pressure is directly proportional to temperature. On increasing the temperature the kinetic energy of gaseous molecules increases and hence the pressure on the walls of container increases.
Therefore, pressure is dircetly proportional to the temperature.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ2
How do you draw acetone using a Bohr model?
Explanation:
this is the one i found.....