The web site of the Nobel Prize explains that readers who want to inspect the Curies' notebooks must sign a paper
that states that they are aware of the health risks that are involved with handling the notebooks. What health risk is
most likely to occur from handling the notebooks?
O excessive coughing
o anemia
O muscle cramping
O swelling of the joints

Answer:

Ok, so the process here is to convert the mass of H2 (hydrogen gas) to moles by dividing the mass by the molar mass of H2. Once you have the moles then you have to multiply by the STP (standard temperature and pressure) molar volume which should be 22.4.

Molar mass of H2 = (1.01)x2 = 2.02g/mol

19.3/2.02 = 9.55 moles

Now just multiply the moles by the molar volume

9.55 moles x 22.4 = 213.92 Litres of H2 are in 19.3g of H2

Answer:

2H2O ------------------] 2H2 + O2

Answer:

B. Its particles maintain a constant speed

Explanation:

Just did it :D

The graph shows the change in temperature of a sample of water in a closed system as thermal energy is added over time. 150°C 100°C Temperature (°C) 50°C 0°C -50°C 10 20 30 40 Time (min) 50 60 during changes of state water particles maintain a constant speed. Therefore, option B is correct.

The term thermal energy is defined as the energy contained within a system that is responsible for its temperature.It is formed when the atoms and molecules in a substance vibrate faster due to a increase in temperature.

The examples of thermal energy sources are fossil fuels like natural gas, coal and oil, and solar heat, heat pump electric heat, and geothermal heat.

Thus, during changes of state water particles maintain a constant speed, option B is correct.

To learn more about the thermal energy, follow the link;

https://brainly.com/question/11278589

#SPJ2

Considering the reaction stoichiometry and Avogadro's Number, the mass of barium chloride produced is 21.6 grams.

The balanced reaction is

2 HCl + Ba → BaCl₂ + H₂

Avogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.

Then you can apply the following rule of three: if 6.023×10²³ molecules are contained in 1 mole of HCl, then 1.25×10²³ molecules are contained in how many moles of HCl?

amount of moles of HCl= (1.25×10²³ molecules × 1 mole)÷ 6.023×10²³ atoms

amount of moles of HCl= 0.2075 moles

Then, 0.2075 moles of HCl react.

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 2 moles of HCl produce 1 mole of BaCl₂, 0.2075 moles of HCl will produce how many moles of BaCl₂?

[tex]amount of moles of BaCl_{2} =\frac{0.2075 moles of HCl x 1 mole of BaCl_{2} }{ 2moles of HCl}[/tex]

amount of moles of BaCl₂= 0.10375 moles

Being the molar mass of BaCl₂ 208.24 g/mole, then the mass of barium chloride produced is calculated as:

[tex]0.10375 molesx\frac{208.24 grams}{1 mole} =21.6 grams[/tex]

Finally, the mass of barium chloride produced is 21.6 grams.

Learn more about:

Answer:

B

Explanation:

We are given that ammonia can be produced from hydrogen gas and nitrogen gas according to the equation:

[tex]\displaystyle 3\text{H$_2$} + \text{N$_2$} \longrightarrow 2\text{NH$_3$}[/tex]

We want to determine the mass of hydrogen gas that must have reacted if 0.575 g of NH₃ was produced.

To do so, we can convert from grams of NH₃ to moles of NH₃, moles of NH₃ to moles of H₂, and moles of H₂ to grams of H₂.

We are given that the molar masses of NH₃ and H₂ are 17.03 g/mol and 2.0158 g/mol, respectively.

From the equation, we can see that two moles of NH₃ is produced from every three moles of H₂.

With the initial value, perform dimensional analysis:

[tex]\displaystyle \begin{aligned} 0.575\text{ g NH$_3$}& \cdot \frac{1\text{ mol NH$_3$}}{17.03\text{ g NH$_3$}} \cdot\frac{3\text{ mol H$_2$}}{2\text{ mol NH$_3$}} \cdot \frac{2.0158\text{ g H$_2$}}{1\text{ mol H$_2$}} \\ \\ & = 0.102\text{ g H$_2$}\end{aligned}[/tex]

*Assuming 100% efficiency.

Our final answer should have three significant figures. (The first term has three, the second term has four (the one is exact), the third term is exact, and the fourth term has five. Hence, the product should have only three.)

In conclusion, our answer is B.

Answer:

polymerization

Explanation:

Glucose is converted into starch by the process called polymerization. In polymerization, several simple and soluble molecules of glucose are put together to form a complex, insoluble molecule of starch.

Glucose is soluble , so it is converted to starch so that it can become insoluble and hence it cannot escape from cell , thus it can also be stored.

Answer:

Coffee Filter.

Tea-bags.

Water Filters.

Sand Filtration.

HEPA Air Filters.

Automotive Filters.

Belt Filters.

Dialysis.

Explanation:

Answer:

We know that 1 mole equals to 6.02 x 10^23 atoms (which is Avogadro's number), so to get to atoms from moles, you would divide the atoms of gold by Avogadro's number

(1.93 x 10^24) / (6.02 x 10^23)

= 3.2 mol of gold (rounded)

It measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 3.21 moles of gold are in 1.93 x 10²⁴atoms of gold.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. Mole is directly proportional to the given number of atoms.

Given number of atoms of gold= 1.93 x 10²⁴atoms

we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mole of gold =given number of atoms of gold ÷ 6.022×10²³(Avogadro number)

Substituting all the given values, we get

Mole of gold = 1.93 x 10²⁴atoms ÷ 6.022×10²³(Avogadro number)

Moles of gold=3.21 moles of gold

Therefore, 3.21 moles of gold are in 1.93 x 10²⁴atoms of gold.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

Both the elements combine together due to incomplete outermost shell.

Two atoms of element Q mixed with element E​ in order to achieve stability because both the elements have incomplete outermost shell which make them very reactive. In element E we can see that it has 7 electrons while on the other hand, element Q has 5 number of electrons.

For gaining stability, each element has to reach 8 electrons so that's why both the elements react with each other and get stability so we can conclude that both the elements combine together due to incomplete outermost shell.

Learn more about reaction here: https://brainly.com/question/11231920

Learn more: https://brainly.com/question/26045025

answer :c

explanation :

group numbers can be used to determine the number of electrons in the outer most shell thus if the group numbers are above four then the elemnts are negative ions if less than four then posetive

Answer:

Nomenclature is the process of naming chemical compounds with different names so that they can be easily identified as separate chemicals. Inorganic compounds are compounds that do not deal with the formation of carbohydrates, or simply all other compounds that do not fit into the description of an organic compound.

Explanation:

Answer:

If the molecules have similar molar masses and similar types of intermolecular forces, look for the one that is the most polar or that has the most electronegative atoms or the most hydrogen bonding groups. That one will have the strongest IMF's overall.

Explanation:

An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.

Intramolecular forces are the forces of attraction that hold atoms together within a molecule. Intramolecular forces require a high amount of energy to splits atoms or molecules in a chemical bonding.

Intermolecular forces are weaker forces of attraction that occur between molecules. They require lesser energy to splits molecules compared to intramolecular forces.

An experiment that show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.

In the process, the energy required to change the state from ice to steam water is more than intermolecular forces.

Thus, we can conclude that this experiment shows that the intramolecular forces are stronger than the intermolecular forces.

Learn more:

https://brainly.com/question/14220340

Answer:

year 1 is 5.5%

year 2 is 7.5%

year 3 is 10.2%

Explanation:

since,

length of the transect covered in seaweed / total lenth of transect x 100

then,

0.55 / 10.0 x 100 = 5.5

and

0.75 / 10.0 x 100 = 7.5

and

1.02 / 10.0 x 100 = 10.2

you could also just move the decimal to the right once

:)

Answer: 23.53g

Explanation:

5.2/(2x16) = 0.1625 mol

0.1625 x 2 = 0.325 mol

0.325 x (23 x 2 + 16 x 2) = 78 x 0.325 = 23.53g

Assuming the surface on which the box moves is frictionless, the rate at which the box accelerate is equal to 0.5 [tex]m/s^2[/tex].

Given the following data:

To determine the rate at which the box accelerate, assuming the surface on which the box moves is frictionless:

Mathematically, Newton's Second Law of Motion is given by the formula;

[tex]Force = mass \times acceleration[/tex]

Making acceleration the subject of formula, we have:

[tex]Acceleration =\frac{Force}{mass}[/tex]

Substituting the given parameters into the formula, we have;

[tex]Acceleration = \frac{25}{50}[/tex]

Acceleration = 0.5 [tex]m/s^2[/tex]

Read more on Newton's Law of Motion here: https://brainly.com/question/1121817

Distance = 50 Km

Displacement = 40 Km

Time = 0.5 hours

We know, speed = [tex] \sf \frac{distance}{time} [/tex]

Therefore, the speed of the car

[tex] \sf = \frac{50}{0.5} = 100[/tex]

We know, velocity = [tex] \sf \frac{displacement}{time} [/tex]

Therefore, the velocity of the car

[tex] \sf = \frac{40}{0.5} = 80[/tex]

Answer:

Answer:The speed of the car is 100 Km/h. The velocity of the car is 80 Km/h to the east.

Hope you could get an idea from here.

Doubt clarification - use comment section.

Answer:

yes if big  no if weak

Explanation:

According to new research, a large earthquake can not only cause other quakes, but also large ones on the opposite side of the Earth.

An earthquake is a sudden movement of rock materials beneath the earth's surface that causes a weak to violent shaking of the ground. The earthquakes are caused by tectonic plate boundaries.

Every day, earthquakes occur all over the world, along both tectonic plate edges and interiors. Earthquakes happen along faults, which are fractures in the rock that allow the blocks to move relative to one another.

Earthquakes are typically caused by underground rock suddenly breaking and rapid movement along a fault. The seismic waves that cause the ground to shake are caused by this sudden release of energy.

A large earthquake can not only cause other quakes, but also large ones on the opposite side of the Earth, according to new research.

Thus, it is possible for an earthquake at this same location to be basically felt where you live.

For more details regarding earthquake, visit:

https://brainly.com/question/29500066

#SPJ2

Answer:

The lack of accuracy and underestimation of absorbance readings obtained from the colorimeter can be contributed to many experimental factors. One plausible error is from the imperfection of the absorber, in that it may not completely absorb the stray light passing by the perimeters of the photoresistor.

Explanation:

In practice there are other sources of error, such as environmental effects on photometer and sample, temperature, line voltage fluctuations, vibrations, contamination, or heating of the sample by the photometer. All these factors may impair the measured result, and ways and means are known to test and eliminate them.

Answer:

The atomic mass

Explanation:

Answer: atomic mass

HEY!

Mayonnaise is an oil in water (O/W) emulsion; ingre- dients are primarily vegetable oil, egg yolk, sodium chloride, water and vinegar. Its relative stability towards microbial spoil- age has been attributed to the high salt content (in the water phase) and low pH, due to the vinegar.

thank me later

carryonlearing

Answer:

group 3 and 12 alkali and alkaline earth metal

Answer:

gamma decay

Explanation:

gamma rays have the highest frequency on the EM spectrum, which makes them the most dangerous.

Answer:

because of atom don't put that as an answer

Explanation:

i need point to do finals

The different behavior of particles in solids and gases, including the intermolecular forces and kinetic energy, leads to solids filling only part of a closed jar while the same mass of a gas fills the whole jar. A solid fills only part of a closed jar, while the same mass of a gas fills the whole jar due to the differences in the behavior of particles in each state of matter.

1. Solid: In a solid, the particles are tightly packed and held in a fixed position. They have a definite shape and volume. The intermolecular forces between the particles are strong, preventing them from moving freely. As a result, solids occupy a specific amount of space within a container.

2. Gas: In a gas, the particles are spread out and move freely. They have no definite shape or volume. The intermolecular forces between the particles are weak, allowing them to move and fill the available space. As a result, gases can expand to fill the entire volume of a container.

When the same mass of a gas and a solid are placed in a closed jar, the gas particles have higher kinetic energy and are more mobile. They collide with each other and the walls of the container, exerting pressure and spreading out to occupy the entire space. Since the intermolecular forces are weak, the gas particles are not constrained by a fixed arrangement.

Learn more about Intermolecular Forces here:

https://brainly.com/question/12243368

#SPJ3

[tex] \sf = \frac{480}{8} = 60[/tex]

Answer:

The velocity of the car is 60 Km/hour to the east.

Hope you could get an idea from here.

Doubt clarification - use comment section.

The part of the chemical reaction that is the Brønsted-Lowry base is BrO.

Bronsted-Lowry definition of a base and acid is as follows:

According to this question, the following chemical reaction is given:

BrO + H2CO3 → HCO3 + BrOH

In the above reaction, BrO is the compound that accepts the hydrogen ion (H+) to become BrOH, hence, BrO is the Bronsted-Lowry base.

Learn more about Bronsted-Lowry base at: https://brainly.com/question/12916250?referrer=searchResults

C. physical change

Explanation:

That's the answer