The total entropy of a system and its surroundings always increases for a spontaneous process. This is a statement of

Answer:

Active transport by the Na+-K+ pump

Explanation:

Active transport by the Na+-K+ pump

Maintenance (and restoration) of the resting ion concentrations depends on the Na+-K+ pump. Once gated ion channels are closed, the combined action of the pump and ion leakage (particularly that of K+) establishes a resting membrane potential in a typical neuron of around âˆ'70 mV.

Answer: The product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.

Explanation:

When two or more chemical substances react together then it forms new substances and these new substances are called products.

For example, [tex]3N_{2}O_{5} + 3H_{2}O \rightarrow 6HNO_{3}[/tex]

This shows that nitric acid [tex](HNO_{3})[/tex] is the product formed and it is an acidic substance.

Hence, the solution at equilibrium will be acidic in nature.

Thus, we can conclude that the product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.

Answer:

198.2 g/mol

Explanation:

C = 12.01 g/mol

H = 1.01 g/mol

N = 14.01 g/mol

O = 16.00 g/mol

(12.01 x 8) + (10 x 1.01) + (14.01 x 2) + (16.00 x 4) = 198.12 g/mol

Answer:

i believe its A, potassium iodide in water

Explanation:

Answer: 178mph

Explanation:

From the question given, we are informed that the speed limit on parts of the German autobahn was once set at 286 kilometers per hour (km/h). Based on the information, the speed limit in miles per hour will then be:

= 286km/h × 1000m/1km × 1mi/1609m

= 178miles per hour

Therefore, the speed limit is 178mph.

Answer:

1) 16.0 moles Al

24.0 moles S

96.0 moles O

2)In 6.10 moles magnesium perchlorate, (Mg(CIO4)2 we have:

6.10 moles Mg

12.2 moles Cl

48.8 moles O

3)4.6 moles of propane (total) contains 13.8 moles of carbon and 36.8 moles of hydrogen atoms

4)The gold coin contains 7.8 *10^22 atoms

Explanation:

Step 1: Data given

Number of moles of aluminum sulfate, Al2(SO4)3 = 8.00 moles

Step 2: Calculate the number of moles

In 1 mol of aluminum sulfate, Al2(SO4)3 we have:

2 moles of Al

3 moles of S

12 moles of O

This means that in 8.00 moles of aluminum sulfate, Al2(SO4)3 we have:

2*8.00 = 16.0 moles Al

3*8.00 = 24.0 moles S

12*8 = 96.0 moles O

2. Calculate the number of moles of magnesium, chlorine, and oxygen atoms in 6.10 moles of magnesium perchlorate, (Mg(CIO4)2

1 mol of magnesium perchlorate, (Mg(CIO4)2 has:

1 Mol of Mg

2 moles of Cl

8 moles of O

In 6.10 moles magnesium perchlorate, (Mg(CIO4)2 we have:

1 * 6.10 moles = 6.10 moles Mg

2*6.10 = 12.2 moles Cl

8*6.10 = 48.8 moles O

3. A sample of propane, C3H8, contains 13.8 moles of carbon atoms. How many total moles of atoms does the sample contain?

In 1 mol of propane, C3H8 we have:

3 moles of C and 8 moles of H

This means if we have 13.8 moles of carbon, we have 13.8/3 = 4.6 moles of propane, C3H8 and 4.6 *8 = 36.8 moles of H

So 4.6 moles of propane contains 13.8 moles of carbon and 36.8 moles of hydrogen atoms

4. A rare gold coin (24 karat, or 100% gold) has a mass of 25.54 g. How many atoms of gold are present in this coin?

Calculate moles of gold:

Moles = mass of gold / molar mass gold

Moles = 25.54 grams / 196.97 g/mol

Moles = 0.1297 moles

Calculate atoms:

Number of atoms = moles * number of Avogadro

0.1297 * 6.022 *10^23 = 7.8 *10^22 atoms

The gold coin contains 7.8 *10^22 atoms

Answer:

1. Weak acid calculation

2. Strong base calculation

3. Strong base calculation

4. Strong base calculation

Explanation:

1. Zero equivalents of base added  

2. 0.15 equivalents of base added  

3. One equivalent of base added  

4. 1.75 equivalents of base added

The equivalents of acetic acid are:

0.100L * (0.300mol/L) = 0.0300 moles of acetic acid = 0.0300Eq.

1. With Zero equivalents of base added you will calculate pH using weak acid calculation because you have only acetic acid (Weak acid) in the solution.

2. When 0.15 equivalents of base are added all the acid reacted and 0.15-0.03 = 0.12 equivalents of Strong base are in excess. With these equivalents and the volume we can find pH using strong base calculation.

3 and 4. As with 0.15 eq. added the 1 eq. and 1.75 eq. produce an excess of strong base and the pH must be calculated by using strong base calculation

The main importance of the titration curve is that it is used show how the pH of the solution changes as a titrant  is added to the solution.

A titration curve is a plot of pH of the system against the volume of titrant added. The question is incomplete but I will try to explain what a titration curve is.

The main importance of the titration curve is that it is used show how the pH of the solution changes as a titrant  is added to the solution.

Learn more about a titration curve: https://brainly.com/question/4260635

Answer: The first law of thermodynamics is a statement of conservation of energy.

Explanation:

According to the first law of thermodynamics, heat provided to a system is actually the sum of internal energy and work done by the system or on the system.

Mathematically, [tex]\Delta Q = \Delta U + \Delta W[/tex]

The first law of thermodynamics also means that energy can neither be created nor it can be destroyed. Hence, energy is conserved.

Thus, we can conclude that the first law of thermodynamics is a statement of conservation of energy.

Answer: The new concentration of the solution is 0.143 M.

Explanation:

Given: [tex]V_{1}[/tex] = 300.0 mL,    [tex]M_{1}[/tex] = 0.335 M

[tex]V_{2}[/tex] = 700.0 mL,         [tex]M_{2}[/tex] = ?

Formula used is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute values into the above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}\\0.335 M \times 300.0 mL = M_{2} \times 700.0 mL\\M_{2} = 0.143 M[/tex]

Thus, we can conclude that the new concentration of the solution is 0.143 M.

Answer:

txyxyc8uviciycuyc

Explanation:

gghvj ucy7cyvyfy

Answer:

The correct answer is A. 59.

Explanation:

The formula for finding the amount of radio active substance that remains after decomposition is A = N(1/2) ^y, where A is the mass remaining, N is the original mass of a radioactive sample and y is the number of half life. In this case, N = 10 g and y = 6/2 = 3. So A is given by 10 x (1/2)^3, which is 10 x 1/2 x1/2 x 1/2 = 1.25 grams.

Answer:

general formula RCOX, where R represents an alkyl or aryl organic radical group, CO ... represents a halogen atom such as chlorine ... loss of a hydroxyl group (-OH), viz, acetyl,. CH, CO- ..

Answer:

Einstein realized that the energy in electrons was caused by the frequency of light and not the intensity of light. This made him realize that he needed to explain the photoelectric effect.

Explanation:

Einstein realized that the photoelectric effect was a system that should be studied and explained in more depth, when he saw how the energy of electrons behaved in the presence of light. He saw that this energy depends entirely on the frequency of light and not on the intensity of light. From this observation, he realized that the photoelectric effect was essential for the production of an electric energy system, through light energy, such as solar energy.

It is important to note that the photoelectric effect refers to the ejection of electrons on a light surface that comes into contact with a light source.

Answer:

Mass of sodium produced = 2.74 × 10⁵ g of Na

Mass of chlorine produce = 4.24 × 10⁵ g of Cl₂

Explanation:

In the electrolysis of molten NaCl as described above, the quantity of charge used is given by the formula, Q = I × t

Where I isnthe current passed in amperes and t is time in seconds.

Q = 4.0 × 10⁴ A × (8 × 60 × 60) s = 1.152 × 10⁹ C

Equation for the discharge of sodium is; Na+ + e- ---> Na (s)

One mole of electrons is required to discharge one mole of Na

One mole of electron = 1 faraday = 96500 C

One mole of Na has a mass of 23 g

96500 C produces 23 g of Na

1.152 × 10⁹ C will produce 23 g × 1.152 × 10⁹ C / 96500 C = 2.74 × 10⁵ g of Na

Equation for the discharge of chlorine gas is; 2 Cl- ---> Cl₂(g) + 2e-

Two mole of electrons are required to discharge one mole of chlorine gas

Two moles of electron = 2 faraday = 2 × 96500 C = 193000

One mole of Cl₂ has a mass of 71 g

193000 C produces 71 g of Cl₂

1.152 × 10⁹ C will produce 71 g × 1.152 × 10⁹ C / 193000 C = 4.24 × 10⁵ g of Cl₂

The amount of Na produced is 274551 g and the amount of Cl₂ produced is 423763.5 g.

Current passed through the cell = [tex]4.0\times10^4 A[/tex]

Time = 8 Hours

We have to calculate the amount of Na and [tex]Cl_2[/tex] produced in 8 hours in the downs cell.

The Downs process is an electrochemical method for the commercial preparation of metallic sodium, in which molten NaCl is electrolyzed in a special apparatus called the Downs cell.

The total charge passed through the cell is calculated by the given formula as

Charge(Q) = Current(I) × time(t)

Q = [tex]4.0\times10^4 A \times t[/tex]

[tex]t = 8 \times 60\times 60[/tex] sec

t = 28800 sec

Q = [tex]4.0\times10^4 A \times 28800[/tex] sec

Q = [tex]115200\times 10^4 A\ sec[/tex]

We know that, Ampere = Coulombs per sec

Q = [tex]115200\times 10^4\ C[/tex]

1 mol of electrons  96500 C charge

Therefore, the number of mols of electrons carries this [tex]115200\times 10^4\ C[/tex] charge = [tex]\frac{115200\times10^4}{96500}[/tex] = 1.1937 × 10⁴ = 11937 mol electrons

In the Down's cell

Half cell reactions are:

Reduction half-reaction: [tex]2Na^+(aq)+2e^- \to 2Na(s)[/tex]

Oxidation half-reaction: [tex]2Cl^-(aq)\to Cl_2(g) + 2e^-[/tex]

We know that no. of moles = [tex]\frac{given \ mass}{molar \ mass}[/tex]

Molar mass of Na = 23 g/mol

The mass of Na formed = 11937 mol × 23 g/mol = 274551 grams

The molar mass of Cl₂ = 71 g/mol

The mass of Cl₂ = [tex]\frac{11937}{2}\times 71 = 423763.5 \ grams[/tex]

Hence, the amount of Na produced is 274551 g and the amount of Cl₂ produced is 423763.5 g.

To learn more about electrochemistry, click here:

https://brainly.com/question/13891856

Answer:

The correct answer is - 0.0188 mJ*s^-1.

Explanation:

In order to convert the kPA value to PA value--

and then convert PA unit to 1 kgm^-1s^-2

And in finally convert mm to m

The value that come should be convert from kgm^2s^-2 to and then convert J to mJ or kJ by dividing 100 or 100 subsequently.

As no question given this method can be followed for the answer.

Answer:

CaCO₃(s) => CaO(s) + CO₂(g) ... GpIIA Decomp

Explanation:

Metallic Carbonates decompose into a metallic oxide and carbon dioxide.

Examples:

Na₂CO₃(s) => Na₂O(s) + CO₂(g) ... GpIA Decomp

MgCO₃(s) => MgO(s) + CO₂(g) ... GpIIA Decomp

Answer: The Gibbs free energy change of the reaction is 2.832 kJ.

Explanation:

The relationship between Gibbs free energy change and reaction quotient of the reaction is:

[tex]\Delta G^o=-RT\ln Q_p[/tex]

where,

[tex]\Delta G^o[/tex] = Gibbs free energy change

R =  Gas constant = 8.314 J/mol.K

T = temperature = [tex]25^oC=298K[/tex]

[tex]Q_p[/tex] = reaction quotient = [tex]\frac{p_{NOCl}^2}{(p_{NO}^2)\times (p_{Cl_2})}[/tex]

We are given:

[tex]p_{NOCl}=8.64atm\\p_{NO}=9.47atm\\p_{Cl_2}=2.61atm[/tex]

Putting values in above equation, we get:

[tex]\Delta G^o=-(8.314)\times 298K\times \ln (\frac{(8.64)^2}{(9.47)^2\times (2.61)})\\\\\Delta G^o=-8.314\times 298\times (-1.143)[/tex]

[tex]\Delta G^o=2831.86J=2.832kJ[/tex]            (Conversion factor: 1 kJ = 1000 J)

Hence, the Gibbs free energy change of the reaction is 2.832 kJ.

The Urms refers to the root mean square speed of the gas. The order of increasing Urms for the gases shown in the question; NF3 < H2S < H2O < He.

The Urms refers to the root mean square speed of the gas. This is ultimately dependent on the relative molecular mass of the gases when they are maintained at the same temperature.

Now, let us look at the order of increasing Urms for the gases shown in the question; NF3 < H2S < H2O < He.

Learnmore about Urms: https://brainly.com/question/365923

Answer:

[tex]T_F=1029\ºC[/tex]

Explanation:

¡Hola!

En este caso, dada la información, es posible determinar que la temperatura del sistema estará entre 560 °C y 1100 °C, por lo tanto, se hará necesario establecer la suma de la energía del cobre y del estaño como cero:

[tex]Q_{Cu}+Q_{Sn}=0[/tex]

Así, podremos escribir esta ecuación en términos de masas, calores específicos y temperaturas como sigue:

[tex]m_{Cu}C_{Cu}(T_F-T_{Cu})+m_{Sn}C_{Sn}(T_F-T_{Sn})=0[/tex]

Con el fin de resolver para la temperature final:

[tex]T_F=\frac{m_{Cu}C_{Cu}T_{Cu}+m_{Sn}C_{Sn}T_{Sn}}{m_{Cu}C_{Cu}+m_{Sn}C_{Sn}}[/tex]

Así, reemplazamos las variables conocidas como se muestra a continuación:

[tex]T_F=\frac{150g*0.093cal/g\ºC*1100\°C+35g*0.060cal/g\ºC*560\°C}{150g*0.093cal/g\ºC+35g*0.060cal/g\ºC}\\\\T_F=1029\ºC[/tex]

¡Saludos!

i can not understand the question. There seems to be missing info

Answer:

Organic fertilizers are those fertilizers that are not artificially produced but are natural and has carbon in them.

Fertilizers in the broad term are used to provide nutrient to the soil and boost growth of crops.

Some of the advantages of organic fertilizers to inorganic fertilizers are:

They do not make crusts on the soil, unlike inorganic fertilizers.

They help add structure to the soil because of the good water movement into the soil

They are easier on the soil because they feed good microbes.

Answer: When excited sodium atoms may emit radiation having a wavelength of 589nm. It's wavelength in meters is [tex]589 \times 10^{-9} m[/tex].

Explanation:

Given: Wavelength = 589 nm

It is known that,

[tex]1 nm = 10^{-9} m[/tex]

Hence, 589 nm is converted into meters as follows.

[tex]589 nm = 589 nm \times \frac{10^{-9}m}{1 nm}\\= 589 \times 10^{-9} m[/tex]

Thus, we can conclude that when excited sodium atoms may emit radiation having a wavelength of 589nm. It's wavelength in meters is [tex]589 \times 10^{-9} m[/tex].

Answer:

Magnesium.

Explanation:

Because it is in group II

Answer:

methylcyclohexane does not possess a chiral center

Explanation:

A molecule is said to possess a chiral center if one or more of the atoms in the molecule is bonded to four different atoms or groups.

If we look at methylcyclohexane, none of the carbon atoms in the molecule is bonded to four different atoms or groups hence the molecule contains no chiral centers and will not exhibit optical isomerism.

So, methylcyclohexane has a plane of symmetry thus it is an achiral molecule.

Answer:

Excluding any secondary chemical reactions,

which would be more effective as an antifreeze; a

solution containing

Select one:

25m CH3OH

the combination of 25m CH3OH and 25m

KCI.

25m KCI.

Explanation:

Antifreeze is the one that reduces the freezing point of a solvent further and will not allow the solvent to freeze.

Among the given options, the correct option is:

25 m CH3OH and 25m KCl.

Since, KOH is a strong electrolyte and dissociates into two ions.

So, the freezing point of solvent decreases further.

Answer:

First, the number of ammonium sulfide molecules should be calculated:

N = NA × n,

where NA - the Avogadro number, n - number of moles.

N (ammonium sulfide) = 6.022 × 1023 × 8.5 mol = 51.187 × 1023.

The moelcular formula of ammonium sulfide is (NH4)2S. It means that each molecule contains 8 hydrogen atoms.

As a result, 8.5 mol of (NH4)2S contain:

51.187 × 1023 × 8 = 41 × 1024 hydrogen atoms.

Answer: 41 × 1024 hydrogen atoms

Answer:

C

Explanation:

Think of 'exo' as exit and 'thermic' as relating to thermal energy/ heat. Thus, an exothermic release thermal energy as the reaction proceeds.

In an exothermic reaction, the total energy of the products is lesser than that of the reactants and ΔH (change in energy) is less than zero.

When heat is absorbed as the reaction proceeds, the chemical reaction is an endothermic reaction.

Answer:

delocalised electrons

Explanation:

they are called delocalised electrons because that can move freely in the molecule

Answer:

The aspirin could be determined if pure or not by testing it with FeCI3 (aq)

The sample of aspirin can be tested for it's purity by treating it with compound of ferric chloride.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ6