Answer:
antimony-121 has the highest percent natural abundance
Explanation:
percent natural abundance;
121.76 = 120.90 x + 122.90 (1 - x)
121.76 = 120.90 x + 122.90 - 122.90x
121.76 = -2x + 122.90
121.76 - 122.90 = -2x
x= 121.76 - 122.90/ -2
x= 0.57
Where x and 1 - x refers to the relative abundance of each of the isotopes
Percent natural abundance of antimony-121 = 57 %
Percent natural abundance of antimony-123 = (1 - 0.57) = 43%
Let us remember that isotopy refers to a phenomenon in which atoms of the same element have the same atomic number but different mass numbers. This results from differences in the number of neutrons in atoms of the same element.
We can clearly see that antimony-121 has the highest percent natural abundance.
The total entropy of a system and its surroundings always increases for a spontaneous process. This is a statement of
Answer:
second law of thermodynamics
Explanation:
According to the second law of thermodynamics, the total entropy of a system and its surroundings always increases for a spontaneous process.
Entropy is defined as the degree of disorderliness of a system. The entropy of a system never remains constant. It either increases or decreases in a process. The total entropy is the sum of the entropy of the system and its surrounding. The total entropy must increase in a spontaneous process.
Thus, the implication of this law is that even, if the entropy of a system decreases, this must be compensated for by increase in entropy of the surroundings in order for the process to be spontaneous.
A chemist combines 33 g of methane with 289 g of oxygen to from 189 g of carbon dioxide and 30 g of water. Determine if the results of the following word problem adheres to the Law of Conservation of Mass.
Answer:
The correct answer is - no not adhere to the law of mass conservation.
Explanation:
According to the law of mass conservation in an isolated system, the mass can not be created or destroyed and in a chemical or physical change, the mass of products should be always equal to the mass of reactants.
On the basis of the law the mass of the chemical reaction-
Mass of products = mass of reactants
33 g of methane + 289g of oxygen = 189g of carbon dioxide + 30g of water
322g ≠ 219 g
which means this reaction does not adhere to the law of conservation.
If an object has a mass of 243.8 g and occupies a volume of 0.125L, what will be the density of this object in gm/cm3?
Answer:
it might reach to 4g per L
Can someone please please help
Answer:
oxidizer
Explanation:
an example of an oxidizers are oxygen and hydrogen peroxide
My question today is : The reaction of 11.9g go CHCl3 with excess chlorine produced 10.2g of CCl4, carbon tetrachloride. What is the percent yield
Answer:
66.7%
Explanation:
Step 1: Write the balanced equation
CHCl₃ + Cl₂ ⇒ CCl₄ + HCl
Step 2: Calculate the theoretical yield of CCl₄ from 11.9 g of CHCl₃
According to the balanced equation, the mass ratio of CHCl₃ to CCl₄ is 119.38:153.82.
11.9 g CHCl₃ × 153.82 g CCl₄/119.38 g CHCl₃ = 15.3 g CCl₄
Step 3: Calculate the percent yield of CCl₄
Given the experimental yield of CCl₄ is 10.2 g, we can calculate the percent yield using the following expression.
%yield = (exp yield/theo yield) × 100%
%yield = (10.2 g/15.3 g) × 100% = 66.7%
When 1-methylcyclopentene undergoes acid catalyzed hydration, the major product formed is 1-methylcyclopentanol. What change(s) in the reactants would result in 2-methylcyclopentanol being the major product
Answer:
Conversion of 1-methyl cyclopentene to 2-methyl cyclopentanol.
Explanation:
When alkenes react with diborane followed by the reaction with hydrogen peroxide and NaOH then the least substituted carbon in the double bond will be substituted.
The formation of 2-methyl cyclopentanol from 1-methyl cyclopentene is shown below:
Which of the following can be determined from the frequency of a light wave?
O A. The height of the wave
O B. The direction of the wave
O C. The source of the wave
O D. The energy of the wave
I Am Thinking A.
Answer:
The answer is d because the light is energy of wave
The frequency of a light wave can be determined
The energy of the wave.So, option D is correct one.
What is frequency?
The number of occurrence of repeating events per unit time is called frequency.The units of frequency is per second or Hertz(Hz).The frequency is used to calculate energy of light .The frequency is directly proportional to the energy. So, if frequency increases the energy also increases.Energy equation,
[tex]E= hv[/tex]
where,
[tex]E[/tex] = Energy of light
[tex]h[/tex]= Planks constant
[tex]v[/tex] = Frequency of wave.
To learn more about frequency,
https://brainly.com/question/14320803
#SPJ2
What is unit? Write down the units of mass, temperature and power
Explanation:
a single thing, person, or group forming part of a whole There are 36 units in my apartment building. the least whole number : one. a fixed quantity (as of length, time, or value) used as a standard of measurement An inch is a unit of length.mass=kilogram (kg)
temperature=kelvin
power=watt
hope it helps
stay safe healthy and happy..Draw 2,3-dichloro octane
Answer:
Hi friend
I hope this image will help you if not I'm sorry
if this help you please mark me as brinalist or vote me.
Thankyou
The size of an atomic orbital is associated with:______________
a. the magnetic quantum number (ml).
b. the spin quantum number (ms).
c. the angular momentum quantum number (l).
d. the angular momentum and magnetic quantum numbers, together.
e. the principal quantum number (n).
Answer:
e. the principal quantum number (n).
Explanation:
The size of the orbital is governed and decided by the principal quantum number n, which is dependent on the overall average distance between the number of electrons as well as the nucleus. The orbital's shape is explained by the angular quantum number. The magnetic quantum number is concerned with the orbital's orientation in space. The quantum number's spin explains the spin of the electrons.
1. Calculate the percent recovery of benzoic acid, naphthalene and 3-nitroaniline if you were able to collect 10.75 g of benzoic acid, 5.41 g of naphthalene, and 7.81 g of 3-nitroaniline from a set of extractions. The starting mass of the mixture was 25.04 g. (0.6 pt) 2. Describe why it is important to use sodium hydroxide and hydrochloride acid in this experiment. Why was it necessary to initially start off with a 5% solution of the acid or base for this experiment
Explanation:
1.)
mass = 25.04
percentage recovery
[tex]benzoic acid = \frac{10.75}{25.04} = 0.4293*100 = 42.93%\\[/tex]
[tex]naphtalene =\frac{5.41}{25.04} = 0.2160*100 = 21.60\\3-nitroaniline=\frac{7.81}{25.04} =0.3119*100=31.19[/tex]
2. This experiment has these compounds, benzoic acid (which is an acid), naphthalene (this is neutral) and 3-nitroaniline (this is a base).
to extract, 5 percent of NaOH has to be used in order for benzoic acid to become with sodium hydroxide. the salt would then dissolve in H2O, the other two remaining are going to dissolve in organic layer. and this would make benzoic acid to leave the mix.
we make use of 5 percent of HCl so that the 3-nitroaniline will turn into ammonium salt with the hcl, then the ammonium salt would dissolve in water and naphtalene would become soluble in organic layer. when this happens we would then have the three compounds separated.
What is the
energy
2) The energy transition from n = 1 →n= 3 in hydrogen is 12.09 eV (1.6022 X 10J= 1 eV)-
of light emitted from n = 3 →n=1?
E e fiz
Answer:
energy is the ability to do work
Given 0.60 mol CO2, 0.30 mol CO, and 0.10 mol H20, what is the partial pressure of the CO if the total pressure of the mixture was 0.80 atm?
Answer:
Explanation:
/ means divided by
* means multiply
1. formula is
partial pressure = no of moles(gas 1)/ no of moles(total)
0.30 mol CO/0.60 mol CO2 + 0.30 mol CO + 0.10 mol H20 ->
.3/(.6+.3+.1) =
.3/1 =
.3 =
partial pressure of CO
2.
.3 * .8 atm = .24
khanacademy
quizlet
The partial pressure of the CO is 0.24 atm if the total pressure of the mixture was 0.80 atm.
Dalton's Law of Partial pressureDalton's Law of partial pressure states that the total pressure exerted by non reacting gaseous mixture at a constant temperature and given volume is equal to the sum of partial pressure of all gases.
Dalton's Law of partial pressure using mole fraction of gas
Partial pressure of carbon monoxide (CO) = Mole fraction of carbon monoxide (CO) × Total pressure
Now, we have to find the first mole fraction of CO
Mole fraction of carbon monoxide (CO) = [tex]\frac{\text{moles of solute}}{\text{total moles of solute}}[/tex]
= [tex]\frac{\text{moles of CO}}{\text{moles of CO}_2 + \text{moles of CO} + \text{moles of H}_{2}O}[/tex]
= [tex]\frac{0.30}{0.60 + 0.30 + 0.10}[/tex]
= [tex]\frac{0.30}{1}[/tex]
= 0.3
Now, put the value in above equation, we get that
Partial pressure of carbon monoxide (CO)
= Mole fraction of carbon monoxide (CO) × Total pressure
= 0.3 × 0.8
= 0.24 atm
Thus, the partial pressure of the CO is 0.24 atm is the total pressure of the mixture was 0.80 atm.
Learn more about the Dalton's Law of partial Pressure here: https://brainly.com/question/14119417
#SPJ2
A chemistry student needs 90.0mL of carbon tetrachloride for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of carbon tetrachloride is 1.59g*cm3- Calculate the mass of carbon tetrachloride the student should weigh out. Be sure your answer has the correct number of significant digits.
Answer:
volume = mass/density
Here, volume = 80g/1.59gcm-3 → 50.314 cm3
Explanation:
Using the boh model of a He ion, what transition is most likelu to result in the emission of radiation with a wavelength of approximately 274 nm
Answer:
[tex]n=6\ to\ n=3[/tex]
Explanation:
From the question we are told that:
Wavelength [tex]\lambda=274 *10^{-9}m[/tex]
Bohr's constant [tex]R = 1.097 × 10^7 / m (or m−1)[/tex]
Helium atom [tex]z=2[/tex]
Generally the equation for Wavelength is mathematically given by
[tex]\frac{1}{\lambda}=Rz^2(\frac{1}{nf^2}-\frac{1}{nf^2})[/tex]
[tex]0.083=(\frac{1}{nf^2}-\frac{1}{nf^2})[/tex]
Therefore
The Range of n fall at
[tex]n=6\ to\ n=3[/tex]
Que es la actividad física y en qué mejora
How many carbon atoms are there in 15 lbs of sugar, C12H22O11?
Answer:
A molecule of sucrose (C12H22O11) has 12 carbon atoms, 22 hydrogen atoms and 11 oxygen atoms.
Explanation:
if this does not help let me know :)
There are 1.4376 × 10²⁶ carbon atoms in 15 lbs of sugar (C12H22O11).
From the given information,
Using the standard conversion method;
1 lbs = 453.592 gram
∴
15 lbs = (453.592 gram × 15 lbs/1 lbs)
= 6803.88 grams
Now, we will need to determine the molar mass of the sugar compound C12H22O11.
Molar mass of C12H22O11 = (12 × 12) +(1 × 22) + (16 × 11)
Molar mass of C12H22O11 = 144 + 22 + 176
Molar mass of C12H22O11 = 342 g/mol
Using the relation:
[tex]\mathbf{Number \ of \ moles = \dfrac{mass}{molar \ mass}}[/tex]
Number of moles = [tex]\dfrac{6803.88 }{ 342}[/tex]
Number of moles of C12H22O11 = 19.894 moles
Since we've known the number of moles present in C12H22O11, the next thing to do is determine the number of molecules of sugar by using Avogadro's constant:
i.e.
number of moles of sugar = [tex]19.894 moles \times \dfrac{6.023 \times 10^{23}}{mol}[/tex]
= 1.198 × 10²⁵ molecules of C12H22O11
Now to determine the number of carbon atoms in 15 lbs, we have:
= number of carbon atoms × amount of molecules
= 12 × 1.198 × 10²⁵ carbon atoms
= 1.4376 × 10²⁶ carbon atoms
Therefore, we can conclude that there are 1.4376 × 10²⁶ carbon atoms present in 15 lbs of sugar, C12H22O11
Learn more about atoms here:
https://brainly.com/question/657632?referrer=searchResults
3. A 3.455-g sample of a mixture was analyzed for barium ion by adding a small excess of sulfuric acid to an aqueous solution of the sample. The resultant reaction produced a precipitate of barium sulfate, which was collected by filtration, washed, dried, and weighed. If 0.2815 g of barium sulfate was obtained, what was the mass percentage of barium in the sample
Answer:
[tex]Ba\ percentage\ in\ Mass=4.8\%[/tex]
Explanation:
From the question we are told that:
Mass of mixture [tex]m=3.455g[/tex]
Mass of Barium [tex]m_b=0.2815g[/tex]
Equation of Reaction is given as
[tex]Ba2+ + H2SO4 => BaSO4 + 2 H+[/tex]
Generally the equation for Moles of Barium is mathematically given by
Since
[tex]Moles of Ba^{2+} = Moles of BaSO_4[/tex]
Therefore
[tex]Moles of Ba^{2+} = \frac{mass}{molar mass of BaSO4}[/tex]
[tex]Moles of Ba^{2+} = \frac{0.2815}{233.39}= 0.0012061 mol[/tex]
Generally the equation for Mass of Barium is mathematically given by
[tex]Mass\ of\ Ba^{2+} = Moles * Molar mass of Ba^{2+}[/tex]
[tex]Mass\ of\ Ba^{2+} = 0.0012061 * 137.33 = 0.1656 g[/tex]
Therefore
[tex]Ba\ percentage\ in\ Mass = mass of Ba^{2+}/mass of sample * 100%[/tex]
[tex]Ba\ percentage\ in\ Mass= \frac{0.1656}{ 3.455 }* 100%[/tex]
[tex]Ba\ percentage\ in\ Mass=4.8\%[/tex]
Write an equilibrium expression for each chemical equation involving one or more solid or liquid reactants or products.
Answer:
a.
[tex]Keq=\frac{[HCO_3^-][OH^-]}{[CO_3^{2-}]}[/tex]
b.
[tex]Keq=[O_2]^3[/tex]
c.
[tex]Keq=\frac{[H_3O^+][F^-]}{[HF]}[/tex]
d.
[tex]Keq=\frac{[NH_4^+][OH^-]}{[NH_3]}[/tex]
Explanation:
Hello there!
In this case, for the attached reactions, it turns out possible for us to write the equilibrium expressions by knowing any liquid or solid would be not-included in the equilibrium expression as shown below, with the general form products/reactants:
a.
[tex]Keq=\frac{[HCO_3^-][OH^-]}{[CO_3^{2-}]}[/tex]
b.
[tex]Keq=[O_2]^3[/tex]
c.
[tex]Keq=\frac{[H_3O^+][F^-]}{[HF]}[/tex]
d.
[tex]Keq=\frac{[NH_4^+][OH^-]}{[NH_3]}[/tex]
Regards!
In the experiment "Preparation and Standardization of a Sodium Hydroxide Solution", why was the burette rinsed with NaOH before filling it to "zero" for the titration?
Answer: The correct option is ALL OF THE ABOVE.
Explanation:
TITRATION is a type of volumetric analysis which is used for determining the concentration of solutions. In this process a specific volume of a solution is placed in a conical flask by means of a pipette and small quantities of a second solution is slowly added from a burette until the end point is reached. This is determined by a means of an indicator which shows a characteristic colour change.
During titration, the following precautions should be followed to avoid errors and maintain standardisation in the experiment.
--> Any air bubble in the burette and pipette must be removed during measurement
--> the burette tap should be tightened to avoid leakage.
--> Remove the funnel from the burette before taking any reading to avoid errors in reading the volume.
--> use the base solution such as Sodium Hydroxide Solution to rinse the burette after washing with soap and tap water:
• to remove any air bubble and fill it's tip
• to remove any residual liquid from the water and soap solution which may interfere with the results of the experiment.
• to check if the burette is in good condition.
Therefore all of the above options to the question are correct.
or each conjugate acid-base pair, identify the first species as an acid or base and the second species as the conjugate acid or base of the first. A) CH3COOH and B) CH3COO- A. is _____ B. is _________ C) CH3O- and D) CH3OH C. is _____ D. is _________
Answer:
A. an acid
B. a base
C. conjugate base
D. conjugate acid
Explanation:
This question appears incomplete because it is starting with a "or".
However, the available question can still be answered.
An acid (according to "Bronsted-Lowry") is a chemical compound/specie that can donate hydrogen ion(s) in a reaction while a base is the compound/specie that can receive hydrogen ion(s). From this definition, it can be deduced that CH₃COOH (ethanoic acid) is an acid (weak acid) because it can donate an hydrogen ion while CH₃COO⁻ is a base because it can receive a hydrogen ion.
Also, a conjugate acid is the compound formed when an acid has donated a hydrogen ion to a base (i.e it is a base with hydrogen ion attached to it) while a conjugate base is the acid that has lost it's hydrogen ion. Thus, the conjugate acid in the question is CH₃OH while the conjugate base in the question is CH₃O⁻.
A. an acid
B. a base
C. conjugate base
D. conjugate acid
Explain carefully what happen to the propanol-water system if approximately
50% of propanol by mass is fractionally distilled. What will be the distillate and
the residue?
Answer:
In the case of mixtures of ethanol and water, this minimum occurs with 95.6% by mass of ethanol in the mixture. The boiling point of this mixture is 78.2°C, compared with the boiling point of pure ethanol at 78.5°C, and water at 100°C. You might think that this 0.3°C doesn't matter much, but it has huge implications for the separation of ethanol / water mixtures. The next diagram shows the boiling point / composition curve for ethanol / water mixtures. I've also included on the same diagram a vapor composition curve in exactly the same way as we looked at on the previous pages about phase diagrams for ideal mixtures.
Name two natural sources of esters.
Answer:
"Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries."
Explanation:
meeet.gooogle.com/ttp-wdqt-pad
Por favor, me ajudem.
Please, help me.
Someone can teach me English, because I'm from Brazil and if you know how to speak Spanish, it's better for me.
What are the concentrations of hydronium and hydroxide ions in a solution with pH 2.6?
Please help omg. Ive been stuck for 15 minutes
Answer:
The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.
Explanation:
pH is a measure of the acidity or alkalinity of an aqueous solution. The pH indicates the concentration of hydrogen ions present in certain solutions. Mathematically it is defined as the opposite of the base 10 logarithm or the negative logarithm of the activity of hydrogen ions, whose equation is
pH= -log [H⁺]
So, being pH= 2.6 and replacing in the definition of pH:
2.6= -log [H⁺]
[tex][H^{+} ]=10^{-2.6}[/tex]
[H⁺]=2.51*10⁻³
pOH is a measure of the concentration of hydroxide ions (OH⁻). The sum between the pOH and the pH results in 14:
pOH + pH= 14
So, being pH= 2.6:
pOH + 2.6= 14
pOH= 14 - 2.6
pOH= 11.4
The pOH is defined as the negative logarithm of the activity of the hydroxide ions. That is, the concentration of OH⁻ ions:
pOH= - log [OH⁻]
Being pOH= 11.4 and replacing
11.4= -log [OH⁻]
[tex][OH^{-} ]=10^{-11.4}[/tex]
[OH⁻]= 3.98*10⁻¹²
The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.
A chemical reaction occurring in a cylinder equipped with a moveable piston produces 0.601 mol of a gaseous product. If the cylinder contained 0.300 mol of gas before the reaction and had an initial volume of 2.16 L, what was its volume after the reaction
Answer:
4.33 L
Explanation:
Assuming ideal behaviour and that all 0.300 moles of gas reacted, we can solve this problem using Avogadro's law, which states that at constant temperature and pressure:
V₁n₂ = V₂n₁Where in this case:
V₁ = 2.16 Ln₂ = 0.601 molV₂ = ?n₁ = 0.300 molWe input the given data:
2.16 L * 0.601 mol = V₂ * 0.300 molAnd solve for V₂:
V₂ = 4.33 LNaCl is ___ formula of common salt
A. Empirical formula
B. Molecular formula
C. Both A and B
D. None of them
A cylinder contains 3.1 L of oxygen at 300 K and 2.7 atm. The gas is heated, causing a piston in the cylinder to move outward. The heating causes the temperature to rise to 610 K and the volume of the cylinder to increase to 9.4 L.
How many moles of gas are in the cylinder?
Express your answer using two significant figures.
Answer: The moles of gas present in the cylinder is 0.34 moles.
Explanation:
Given: [tex]P_{1}[/tex] = 2.7 atm, [tex]V_{1}[/tex] = 3.1 L, [tex]T_{1}[/tex] = 300 K
[tex]P_{2}[/tex] = ?, [tex]V_{2}[/tex] = 9.4 L, [tex]T_{2}[/tex] = 610 K
Formula used to calculate the final temperature is as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{2.7 atm \times 3.1 L}{300 K} = \frac{P_{2} \times 9.4 L}{610 K}\\P_{2} = \frac{5105.7}{2820} atm\\= 1.81 atm[/tex]
Now, moles present upon heating the cylinder are as follows.
[tex]P_{2}V_{2} = n_{2}RT_{2}\\1.81 atm \times 9.4 L = n_{2} \times 0.0821 L atm/mol K \times 610 K\\n_{2} = \frac{17.014}{50.081} mol\\= 0.34 mol[/tex]
Thus, we can conclude that moles of gas present in the cylinder is 0.34 moles.
determine the number of moles of Cl in 1.9 mol of CaCl2
Explanation:
In the formula of [tex]CaCl_2[/tex] we can see that there are 2mol Cl in 1 molecule of CaCl2. So, now we can do some math to find out how many mol of Cl there are in 1.9mol CaCl2!
[tex]1.9molCaCl_2*\frac{2molCl}{1molCaCl_2}[/tex]
So, there are 3.8mol Cl
An atom has 20 electrons. Find out
i. It’s atomic numbers and total number of p-electrons
ii. The value of azimuthal quantum number (l) and magnetic quantum number (m) of the 19th electron of the atom.
iii. It’s group position in the periodic table.
Answer:
it's atomic number is 5 and total number is 10
The atom has an atomic number of 20 and has a total of 12 p electrons.
The azimuthal quantum number (l) of the 19th electron is 0 and the magnetic quantum number (m) of the 19th electron is 0.
It is an element of group 2
The number of electrons in the neutral atom is equal to the number of protons and is also the atomic number of an atom.
An atom is known to be electrically neutral. This is because the number of electrons in the atom is equal to the number of protons in the neutral atom.
The number of protons in the neutral atom is called the atomic number of the atom.
For an element that has 20 electrons, its electronic configuration is;
1s2 2s2 2p6 3s2 3p6 4s2.
The 19th electron is in the 4s orbital hence both the azimuthal and magnetic quantum numbers are zero.
The element has outermost electron configuration ns2 so it mus belong to group 2 of the periodic table.
https://brainly.com/question/16979660