Answer:
There will be very little of BrOCl BrCl
Explanation:
Based on the equilibrium:
Br2(g) + OCl2(g) ⇄ BrOCl(g) + BrCl(g)
The equilibrium constant, Kc, is:
Kc = 1.58x10⁻⁵ = [BrOCl] [BrCl] / [Br2] [OCl2]
As Kc is <<< 1, in equilibrium, the concentration of products will remain lower regard to the concentration of the reactants. That means, right answer is;
There will be very little of BrOCl BrClSuppose that you move from a Suppose that you move from a town near the ocean to a town in the mountains. To what atmospheric changes would your body need to adjust? town near the ocean to a town in the mountains. To what atmospheric changes would your body need to adjust?
Answer:
all I can say is town near the ocean atmospheric changes will be cooler, warm, sea breeze, and fresh healthy air. Then when it comes to the mountain lot of change firstly there's a dry air
A sample of gas is placed into an enclosed cylinder and fitted with a movable piston. Calculate the work (in joules) done by the gas if it expands from 5.33 L to 11.05 L against a pressure of 1.50 atm.
Explanation:
here is the answer. Feel free to ask for more chem help
If 0.250 L of a 5.90 M HNO₃ solution is diluted to 2.00 L, what is the molarity of the new solution?
Answer:
0.74 M
Explanation:
From the question given above, the following data were obtained:
Molarity of stock solution (M₁) = 5.90 M
Volume of stock solution (V₁) = 0.250 L
Volume of diluted solution (V₂) = 2 L
Molarity of diluted solution (M₂) =?
The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:
M₁V₁ = M₂V₂
5.90 × 0.250 = M₂ × 2
1.475 = M₂ × 2
Divide both side by 2
M₂ = 1.475 / 2
M₂ = 0.74 M
Thus, the molarity of the diluted solution is 0.74 M
Choose the correct statement. A) The cathode is the electrode where the oxidation takes place. B) The cathode is the electrode where the reduction takes place. C) Both oxidation and reduction may take place at the cathode, depending on the cell. D) The cathode is always positive
Please can someone please help me !!
Answer:
False
Explanation:
Question 65 pts
(07.02 MC)
During a reaction, ΔH for reactants is −750 kJ/mol and ΔH for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)
Group of answer choices
It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
Answer:
It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed
Explanation:
A reaction may be endothermic or exothermic. In an endothermic reaction, energy is absorbed by the process while in an exothermic process energy is given out by the process.
Recall that the enthalpy change of a reaction = enthalpy of products - enthalpy of reactants
Hence, where the energy required to break bonds in the reactants is less than the energy released when the products are formed, the reaction is endothermic.
For an endothermic reaction, the enthalpy change of the reaction is positive.
In this case, enthalpy of reaction = 920 - (-750) = 1670 kJ/mol
why do people who do a lot of physical work need more carbohydrate?
Answer:
A person doing physical work needs lots of good carbohydrates to keep their energy levels up and proteins to repair a muscle that might get wear and tear from overexertion. Carbohydrate will help the person work for more extended periods.
Explain what happens when water reacts with sodium metal. Support your answer with the relevant
equation.
Sodium metal reacts rapidly with water to form a solution of sodium hydroxide (NaOH) and hydrogen gas (H2). This reaction is exothermic.
Equation:
2Na + 2H²0 --------}- 2NaOH + H²
(S)-Pentan-2-ol was treated sequentially with methanesulfonyl chloride (CH3SO2Cl) and then potassium iodide. What is the final product that forms
Answer:
(S)-Pentan-2-ol was treated sequentially with methanesulfonyl chloride (CH3SO2Cl) and then potassium iodide. What is the final product that forms
Explanation:
Alcohols are poor leaving groups.
To make -OH group a better-leaving group, it should be treated with sulfonyl chlorides.
Then, methane sulfonyl group makes will be substituted on the -OH group and forms sulfonyl esters and makes it a better leaving group.
After that treating with KI proceeds through nucleophilic bimolecular substitution and the final product formed is shown below:.
viagnesiumi anu
If I have 100g of Magnesium, how much Magnesium Nitride will I theoretically create?
O 24.3g Mg3 N2
O 138.4g Mg3 N2
415.2g Mg3 N2
O 200g Mg3 N2
Answer:
Theoretical yield is 138.4 g
Explanation:
In the first step we determine the reaction:
3Mg + N₂ → Mg₃N₂
Mass of reactant is 100 g. We assume the nitrogen is in excess, so we work with Mg. We convert mass to moles:
100 g . 1mol/ 24.3g = 4.11 moles of Mg.
Ratio is 3:1. 3 moles of Mg can produce 1 mol of nitride
Our 4.11 moles, may produce (4.11 . 1)/3 = 1.37 moles of Mg₃N₂
We convert mass to moles, to find the theoretical yield:
1.37 mol . 100.9 g/mol = 138.2 g
define saturated and unsaturated fats
Answer:
unsaturated fats, which are liquid at room temperature,are different from saturated fat because they contain one or more double bonds and fewer hydrogen atoms on their carbon chain.
What are the equipments needed to determine the density of a liquid in laboratory ?
Answer:
A hydrometer is a special device used to determine the density of liquids.
Explanation:
I hope this helps you. Have a nice day!
Which one of the following reactions is NOT balanced?
2 CO + O2 + 2 CO2
2 SO2 + O2 +2 SO3
2 KNO3 + 10 K 5 K20 + N2
SF4 + 3 H2O → H2SO3 + 4HF
Answer:
co+ o2+ 2co2 is not balanced reaction
what type of properties change ina physical change? Give an example to support your answer?
pls quick who will give the answer first will get the brainliest
Explanation:
We can observe some physical properties, such as density and color, without changing the physical state of the matter observed. Other physical properties, such as the melting temperature of iron or the freezing temperature of water, can only be observed as matter undergoes. A physical change physical change involves a change in physical properties. Examples of physical properties include melting, transition to a gas, change of strength, change of durability, changes to crystal form, textural change, shape, size, color, volume and density.hope it helps.stay safe healthy and happy.17. The density of a population would influence which limiting factor?
O niche
O growth rate
O weather
O space
Answer:
The answer is growth rate
Explanation:
it will help you
If 0.21J of heat cause a 0.308 degree C temperature change, what mass of water is present?
a 0.0702 g
b 0.00540 g
c 0.163 g
d 18.4 g
Answer:
The correct answer is Option c (0.163 g).
Explanation:
Given:
Heat energy,
Q = 0.21 J
Specific heat,
c = 4.184 J/g°c
Change in temperature,
ΔT = 0.308°C
As we know,
⇒ [tex]Q=mc \Delta T[/tex]
By substituting the values, we get
[tex]0.21=m\times 4.184\times 0.308[/tex]
[tex]m=\frac{0.21}{0.308\times 4.184}[/tex]
[tex]=\frac{0.21}{1.28867}[/tex]
[tex]=0.163 \ g[/tex]
How many ozone molecules can each chlorine atom in the stratosphere destroy
Answer:
100,000
Explanation:
Name the following compound. Group of answer choices 2-methyl-4-pentyne 4-methyl-3-propyl-1-pentyne 3-isopropyl-1-hexyne 1-nonyne 4-propyl-5-hexyne
The question is incomplete, the complete question is shown in the image attached
Answer:
3-isopropyl-1-hexyne
Explanation:
Organic compounds can be named from the structure of the compound. The name reveals the arrangement of atoms and bonds in the molecule.
If we look at the compound in the question, we will notice that the parent chain contains six carbon atoms, the triple bond is located at position 1 and the isopropyl substituent is attached to carbon 3.
Hence the proper name of the compound becomes, 3-isopropyl-1-hexyne.
What volume (mL) of the sweetened tea described in Example 1 contains the same amount of sugar (mol) as 10 mL of the soft drink in this example
The question is incomplete, the complete question is:
What volume (mL) of the sweetened tea described in Example 3.14 contains the same amount of sugar (mol) as 10 mL of the soft drink in this example. The example is attached below.
Answer: 75 mL of sweetened tea will contain the same amount of sugar as in 10 mL of soft drink
Explanation:
We first calculate the number of moles of soft drink in a volume of 10 mL
The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (mL)}}[/tex] .....(1)
Taking the concentration of soft drink from the example be = 0.375 M
Volume of solution = 10 mL
Putting values in equation 1, we get:
[tex]0.375=\frac{\text{Moles of sugar in soft drink}\times 1000}{10}\\\\\text{Moles of sugar in soft drink}=\frac{0.375\times 10}{1000}=0.00375mol[/tex]
Calculating volume of sweetened tea:
Moles of sugar = 0.00375 mol
Molarity of sweetened tea = 0.05 M
Putting values in equation 1, we get:
[tex]0.05=\frac{0.00375\times 1000}{\text{Volume of sweetened tea}}\\\\\text{Volume of sweetened tea}=\frac{0.00375\times 1000}{0.05}=75mL[/tex]
Hence, 75 mL of sweetened tea will contain the same amount of sugar as in 10 mL of soft drink
1. What is the equivalent pressure measurement in mmHg of 2.50 atm?
Answer:
Atmosphere to mmHg Conversion Example. Task: Convert 8 atmospheres to mmHg (show work) Formula: atm x 760 = mmHg Calculations: 8 atm x 760 = 6,080 mmHg Result: 8 atm is equal to 6,080 mmHg.
Explanation:
This answer is helpfull for you I nowaromatic compounds aliphatic compounds
Answer:
I hoped it helps you fod blessed:)
what class of organic compound is formed when cyclopentanone reacts with ethylamine in the presence of trace acid
The question is incomplete, the complete question is;
What functional group results when cyclopentanone reacts with ethylamine in the presence of trace acid? A) cyanohydrin B) semicarbazone C) imine D) enamine E) oxime
Answer:
imine
Explanation:
An imine is an unsaturated amine. An imine contains the carbon- nitrogen double bond.
Imines are obtained when a carbonyl compound is condensed with NH3 or an amine. The reaction involves several steps in its mechanism.
Since cyclopentanone is a ketone (carbonyl compound) and ethylamine is an amine,in the presence of trace acid, condensation of the two compounds occur to yield an imine
What is the volume of a flask containing 0.199mol of Cl2at a temperature of 313K and a pressure of 1.19atm
Answer:
43.0 L
Explanation:
Step 1: Given and required data
Moles of chlorine gas (n): 0.199 molTemperature (T): 313 KPressure (P): 1.19 atmIdeal gas constant (R): 0.0821 atm.L/mol.KStep 2: Calculate the volume of the flask (V)
We will use the ideal gas equation.
P × V = n × R × T
V = n × R × T / P
V = 1.99 mol × (0.0821 atm.L/mol.K) × 313 K / 1.19 atm = 43.0 L
The answer is 4.30 L
You want to quickly set up a temporary water bath in your lab with a volume of 10.0 L and a temperature of 37.0°C. You only have hot water from your hot water faucet (temperature = 61.0°C) and cold water from your cold water faucet (temperature = 22.0°C). What volume of hot water (in liters) must you mix with cold water to get 10.0 L of 37.0°C water? Assume the specific heat of the water is 4.184 J/g･K and that the water has a density of 1.00 g/mL.
Answer:
Volume of hot water required = 3.85L
Explanation:
Suppose volume of hot Then volume of water required cold water = = x L (10.0-x) L
Heat given by hot water (Q₁)
= mass of hot water x heat capacity of water X AT
= x L * 4.184 * J / g. к x(61.0-37.0) °℃.
And Heat absorbed by cold water (Q₂) = (10.0-x) L x 4.184 J/g*k x(37+0 -220) C
Since energy is consumed, Q₁ = Q2.
i.e. X*l *4.184*J/g*k*24C = (10.0-x)L x 184 5
24 x 15 (10.0-x) = 150. - 15x
x = 150. (24+15) = 3.846
So, volume of hot water required. = 3.85 L
When the temperature of the water increases the water becomes hot.
According to the question the volume of hot water required = 3.85L.
Suppose volume of hot Then the volume of water required cold water is [tex]x L (10.0-x) L[/tex]
All the data are given in the question, which is as follows:-
Heat has given by hot water (Q₁)The formula we are going to use is as follows:-
= mass of hot water x heat capacity of water X AT
= [tex]x L * 4.184 *(61.0-37.0) ^oC[/tex]
The heat absorbed by cold water (Q₂) = [tex](10.0-x) L *4.184 *(37+0 -220) ^oC[/tex]
Since energy is consumed, Q₁ = Q2.
[tex]X*l *4.18424C = (10.0-x)L * 184 524 * 15 (10.0-x) = 150. - 15xx = 150. (24+15) = 3.846[/tex]
Hence, the volume of hot water required is = 3.85 L
For more information, refer to the link:-
https://brainly.com/question/2817451
Please please help me
Which of the following was NOT explained by Dalton's atomic theory?
ANSWER:
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
i think 1. law of muliple proportion
Explanation:
please like
When taking a measurement with a pH meter, keep the instrument in the _______storage solution or water until it is needed. Rinse the pH meter with
_______deionized water or acetone and gently pat dry. Place the meter in the sample solution, and record the measurement when the pH _______stabilizes or reaches the maximum value
Answer:
storage solution , deionized water, stabilizes
Explanation:
A pH meter is a scientific device or instrument that is used to measure the pH of a given aqueous solution thereby determining the nature of the solution whether it is acidic or basic or neutral.
While using the pH meter or taking the measurement using the pH meter --
it should be kept in a storage solution for effective working.Before using the device, it is rinsed with a deionized water and pat dry.Record the measurements when the pH meter stabilizes.A sample of hydrogen nitrate or nitric acid, HNO 3 contains 18.8 x 1022 molecules.
How much mass of nitric acid are in the sample?
Answer:
19.7 g.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to realize this problem can be solved by using a molecules-moles-mass relationship, starting with the given molecules, using the Avogadro's number and the molar mass of nitric acid (63.01 g/mol):
[tex]18.8x10^{22}molec*\frac{1mol}{6.022x10^{23}molec}* \frac{63.01g}{1mol} \\\\=19.7g[/tex]
Regards!
g You observed the formation of several precipitates in the Reactions in Solution lab exercise. Identify the precipitate in each of the following reactions: a. The yellow precipitate formed in the reaction between KI and Pb(NO3)2 is . b. The white precipitate formed in the reaction between BaCl2 and H2SO4 is . c. The brown precipitate formed in the reaction between NaOH and FeCl3 is . d. The blue precipitate formed in the reaction between CuSO4 and NaOH is .
Answer:
For a: Lead iodide is a yellow precipitate.
For b: Barium sulfate is a white precipitate.
For c: Ferric hydroxide is a brown precipitate.
For d: Copper (II) hydroxide is a blue precipitate.
Explanation:
Precipitation reaction is defined as the reaction where a solid precipitate (solid substance) is formed at the end of the reaction. It is insoluble in water.
For the given options:
For (a):The chemical reaction between KI and lead (II) nitrate follows:
[tex]2KI(aq)+Pb(NO_3)_2(aq)\rightarrow PbI_2(s)+2KNO_3(aq)[/tex]
The iodide of lead is generally insoluble in water. Thus, lead iodide is a yellow precipitate.
For b:The chemical reaction between barium chloride and sulfuric acid follows:
[tex]BaCl_2(aq)+H_2SO_4(aq)\rightarrow BaSO_4(s)+2HCl(aq)[/tex]
The sulfate of barium is insoluble in water. Thus, barium sulfate is a white precipitate.
For c:The chemical reaction between NaOH and ferric chloride follows:
[tex]3NaOH(aq)+FeCl_3(aq)\rightarrow Fe(OH)_3(s)+3NaCl(aq)[/tex]
The hydroxide of iron is insoluble in water. Thus, ferric hydroxide is a brown precipitate.
For d:The chemical reaction between NaOH and copper sulfate follows:
[tex]CuSO_4+2NaOH\rightarrow Cu(OH)_2+Na_2SO_4[/tex]
The hydroxide of copper is insoluble in water. Thus, copper (II) hydroxide is a blue precipitate.
(a) The yellow precipitate formed in the reaction between KI and Pb(NO3)2 would be PbI2 according to the equation:
[tex]Pb(NO_3)_2(aq) + 2KI(aq) ---> PbI2(s) + 2KNO_3(aq)[/tex]
(b) The white precipitate formed in the reaction between BaCl2 and H2SO4 would be BaSO4 according to the equation:
[tex]BaCl_2 (aq) + H_2SO_4 (aq) ---> BaSO_4 (s) + 2 HCl (aq)[/tex]
(c) The brown precipitate formed in the reaction between NaOH and FeCl3 would be Fe(OH)3 according to the equation:
[tex]FeCl_3 (aq) + NaOH (aq) ---> Fe(OH)_3 (s) + NaCl (aq)[/tex]
(d) The blue precipitate formed in the reaction between CuSO4 and NaOH would be Cu(OH)2 according to the equation:
[tex]CuSO_4(aq) + 2 NaOH (aq) ---> Cu(OH)_2 (s) + Na_2SO_4 (aq)[/tex]
More on precipitation reaction can be found here: https://brainly.com/question/24846690
Suppose an electron is transferred from a potassium atom to an unknown halogen atom. For which of the following halogen atoms would this process require the least amount of energy?
A. Cl
B. Br
C. I
Answer:
Cl
Explanation:
Electronegativity is the ability of an electron to attract electrons.
Now, due to the fact that halogens need just one more electron to become stable in their outermost shell, it means all halogens are electronegative.
However, the smaller the atomic number, the bigger the charge density and thus the more electronegative.
Thus, it is the halogen element with the highest atomic number further down the periodic table that will have the least electro negativity and thus require highest amount of energy to attract other electrons.
Thus, since chlorine (Cl) has the least atomic number of 17, then it means that it will be the one that will easily accept the electrons the most from other elements. Therefore the process of transferring electrons from potassium to chlorine will take the least amount of energy.