Answer:
Our weight on moon is less than it would be on Earth.
Explanation:
Due to a difference of the strength of gravity on the moon. The moon's gravitation force is determined by the mass and the size of the moon. Since the moon has significantly less mass than the Earth, it will not pull objects toward itself at the strength that Earth will. This means that if you went to the moon you would weigh less, even though your mass stays the same.
asset question.....only answers otherwise u will be reported
Answer:
C. 24 hrs
Explanation:
it takes the earth 24 hrs to make one full revolution.
A boat takes off from the dock at 2.5m/s and speeds up at 4.2m/s2 for 6.0 seconds how far has the boat traveled
Answer:
The answer is "91 m"
Explanation:
[tex]v_0 = 2.5 \ \frac{m}{s}\\\\a = 4.2\ \frac{m}{s^2}\\\\t = 6.0\ s\\\\\Delta x=?[/tex]
Using formula:
[tex]\Delta x = v_0 t +\frac{1}{2} at^2\\\\[/tex]
[tex]= 2.5 \times 6.0 +\frac{1}{2} \times 4.2 \times 6.0^2\\\\= 90.6\ m \approx 91\ m[/tex]
It was found that ice cream sales decrease significantly as the temperature outside decreases; a very strong relationship was found. What is the most likely correlation coefficient from this hypothetical study
Answer:
Value closest to 1
Explanation:
It is described from the scenario above that ice cream sales decreases as the outside temperature increases, hence showing a strong relationship between both variables (icream sales and temperature). The correlation Coefficient is a metric used in regression modeling to depict the strength of relationship between two variables, (The dependent and independent variables). Correlation Coefficient ranges from (-1 to +1). With values close to 1 or - 1. Also the positive and negative signs are used to show the type of relationship between the variables. If an increase in variable A leads to a decrease in variable B, then we have negative correlation (-) ; while an increase or decrease in both variables depicts a positive correlation. The most likely correlation Coefficient for the study above will be a positive value which is close to 1 since the relationship is described as strong.
Why are dark matter and dark energy described as dark
Dark matter and dark energy described as dark because of its no interaction with electromagnetic field.
Why are dark matter and dark energy described as dark?
Dark matter is called "dark" because it does not interact with the electromagnetic field. This means that it does not absorb, reflect, or emit electromagnetic radiation and therefore, it is difficult to detect.
So we can conclude that dark matter and dark energy described as dark because of its no interaction with electromagnetic field like dark substances.
Learn more about matter here:https://brainly.com/question/3998772
#SPJ1
Dark matter and dark energy are described as dark because it doesn't seem to interact with the electromagnetic field.
What is the matter?The matter is a material that fills space and has inertia. Modern physics states that matter is made up of several kinds of particles, each of which has a mass and size.
The electron, proton, and neutron are three of the most well-known instances of material particles. Atoms are made up of combinations of these particles.
Dark matter is so-called because it doesn't seem to interact with the electromagnetic field.
This means it doesn't generate electromagnetic radiation like light or absorb electromagnetic radiation as it does. As a result, it is hard to detect.
Hence, dark matter and dark energy are described as dark.
To learn more about the matter refer;
https://brainly.com/question/4513444
#SPJ1
What is the name of the Egyptian sun god, usually depicted as a hawk-headed man with a solar disk and cobra on his head
Answer: Re-Horakhty
Explanation:
He has a human body and a falcon head, he has a crown in form of a disk with a cobra on his head. Ra-Horakhty was thought of as the god of the rising sun.
convert the following as instructed
67 kg into gram
explain step by step
please reply quickly its urgent
Answer:
1kg = 1000g
67kg therefore would be equal to
67 x 1000 = 67,000g = 6.7 x 10⁴g.
If voltage , V = 100 + 6 volt and current , I = 10+ 0.2 A , then find
percentage error in R.
Explanation:
As we know, resistance is the ratio of voltage used and current flowing through the circuit. So,
R = V/IBy error calculation
∆R/R = [(∆V/V)100] + [(∆I/I)100]V = 100 ± 6% V
I = 10 ± 0.2% A
∆R/R= (5/100)×100 + (0.2/10)×100
∆R/R=5+2=7%
So, percentage error in resistance (R) = ± 7%.Answer:
Percentage error of R is ±7%
From laboratory measurements, we know that a particular spectral line formed by hydrogen appears at a wavelength of 121.6 nanometers (nm). The spectrum of a particular star shows the same hydrogen line appearing at a wavelength of 121.8 nm. What is the receding speed of the star? c = 3x10^5 km/s
Answer:
[tex]v=-4.93\times 10^{5}~m/s[/tex] [negative sign denotes that it is moving away]
Explanation:
Actual wavelength of hydrogen spectral lines, [tex]\lambda=121.6~nm[/tex]
Apparent wavelength of hydrogen spectral lines from a star, [tex]\lambda'=121.8~nm[/tex]
So, shift in wavelength:
[tex]\Delta \lambda=\lambda'-\lambda[/tex]
[tex]\Delta \lambda=121.8-121.6[/tex]
[tex]\Delta \lambda=0.2~nm[/tex]
Using Doppler's shift:
[tex]\frac{\Delta \lambda}{\lambda} =-\frac{v}{c}[/tex]
[tex]\frac{0.2}{121.6} =-\frac{v}{3\times 10^8}[/tex]
[tex]v=-4.93\times 10^{5}~m/s[/tex] [negative sign denotes that it is moving away]
Two students with masses of 40kg and 32 kg are sitting 22 m apart. What is the gravitational force of attraction between them?
I get 1.76 x 10^-10 Newton.
That's 0.000 000 000 176 Newton
Which is about 0.000 000 000 635 ounce of force pulling them together.
That's why we never notice it.
6. An object is fired from the gound at 275 m/s at an angle of 55° N of E.
a. How far away did the object first hit the ground?
b. what is the maximum height that the object reaches?
there u go fella hope u understood
1. A plane flying a triangular patter flies 150 km[N], then 400 km(E). What is the total displacement of the
plane after these two legs? {4}
2. Ken and Susie are standing together. Ken walks 10 m (N) and then 15 m [W]. Susie walks 25 m [E] and
then 30 m [S]. What is the displacement from Ken to Susie? {5}
3. Students are performing an experiment for their physics class and are testing their predictions for
projectile motion. They set up a system so that a beanbag is launched horizontally off one of their
desks with an initial speed of 4.2 m/s. They measure the height of the desk to be 1.3 m.
a. What is the time of flight for the beanbag? {3}
b. What is the range for the beanbag? {2}
4. A historical society is testing an old cannon on the top of an old fort that has rusted and can only be
fired horizontally. They perform a few test fires of the cannon and measure the time of flight to be
3.78 s. How high is the hill? {3}
Answer:
1. The displacement is 427.2 km.
Explanation:
1. A = 150 km North
B = 400 km East
The net displacement is given by
[tex]R =\sqrt{400^2 + 150^2 }\\\\R = 427.2 km[/tex]
A child who is swimming toward shore at 0.78 m/s sees shark and picks up his speed
to 1.89 m/s. He covers 17.5 m until he lands on shore. What was his acceleration?
Answer:
0.085m/s²
Explanation:
Use v²=v0²+2a(d)
solve for a
v²-v0²/2d=a
Plug in givens
1.89²-0.78²/2*17.5=a
Plug into calculator
a=0.085m/s²
what is the angular speed w of the system immediately after the collision in terms f the sstem parameters and I
Answer: hello some part of your question is missing attached below is the missing detail
answer :
wf = M( v cos∅ )D / I
Explanation:
The Angular speed wf of the system after collision in terms of the system parameters and I can be expressed as
considering angular momentum conservation
Li = Lf
M( v cos∅ ) D = ( ML^2 / 3 + mD^2 ) wf
where ; ( ML^2 / 3 + mD^2 ) = I ( Inertia )
In terms of system parameters and I
wf = M( v cos∅ )D / I
A car's bumper is designed to withstand a 5.04-km/h (1.4-m/s) collision with an immovable object without damage to the body of the car. The bumper cushions the shock by absorbing the force over a distance. Calculate the magnitude of the average force on a bumper that collapses 0.255 m while bringing a 890-kg car to rest from an initial speed of 1.4 m/s.
Answer:
3420.39 N
Explanation:
Applying,
Fd = 1/2(mv²-mu²)................. Equation 1
Where F = force on the bumber, d = distance, m = mass of the car, v = final velocity, u = initial velocity.
make F the subject of the equation
F = (mv²-mu²)/2d............... Equation 2
From the question,
Given: m = 890 kg, v = 0 m/s (to rest), u = 1.4 m/s, d = 0.255 m
Substitute these values into equation 2
F = [(890×0²)-(890×1.4²)]/(2×0.255)
F = -1744.4/0.51
F = -3420.39 N
The negative sign denotes that the force in opposite direction to the motion of the car.
To leave the gravitational pull of the Earth, and explore other planets, satellites must have at least:
Answer:
To explore the other planets, the satellite must have the velocity more than the escape velocity.
Explanation:
The minimum velocity required by any object to escape from the earth gravitational pull is called the escape velocity.
The escape velocity for any planet depends on the mass of planet and radius of planet. It does not depends on the mass of object. The escape velocity is same for any mass for a particular planet.
So, to explore the other planets, the satellite must have the velocity more than the escape velocity.
What is the name of the part of the wave that is labeled -
answer: amplitude
the ones who have to watch the video
Answer:
amplitude
Explanation:
sound travel and it amplifies
a car is travelling at 36 km per hour if its velocity increases to 72 km per hour in 5 seconds then find the acceleration of car in SI unit
Answer:
36 km /h means 10 m/s. Increase in speed is 10m/s in 5 s . Acceleration is ( 10/5 ) = 2 m/s^ 2.
a= 2m/s²
Explanation:
U=36km/h
V=72km/h
T=5s
Conversion of Km to m and H to s
1km = 1000m
36km=36×1000 = 36000m
1H = 3600s
For U, 36000/3600
=10m/s
For V,
72km= 72×1000 =72000
72000/3600
20m/s
a=(V-U)/T
a=(20-10)/5
a= 10/5
a= 2m/s²
What is the enthalpy change, AH, for this reaction? Show your work to receive full credit. URGENT PICTURE INCLUDED !!!
Answer:
150 kJ
Explanation:
Applying,
ΔH = Energy level of Product(E') - Energy level of reactant(E)
Where ΔH = enthalpy change, E' and E = energy level of the product and the reactant respectively
ΔH = E'-E............. Equation 1
From the diagram,
Given: E' = 200 kJ, E = 50 kJ
Substitute these values into equation 1
ΔH = 200-50
ΔH = 150 kJ
Hence the enthalpy change for the reaction is 150 kJ
What is the magnitude of the electric field at a point 0.0055 m from a 0.0025
C charge?
kg
Use E = and k=9.00 x 10 N.m²/C2.
O A. 7.4 x 1011 N
O B. 2.0 x 1010 N
O C. 4.1 x 10°N
OD. 7.9 x 1012 N
Answer:
Explanation:
The equation for the electric field is
[tex]E=\frac{kQ}{r^2}[/tex] so filling in:
[tex]E=\frac{9.00*10^9(.0025)}{(.0055)^2}[/tex] which in the end gives you
E = 7.4 × 10¹¹, choice A
While traveling north on an expressway, a car traveling 60 mph (miles per hour) slows down to 30 mph in 12 minutes due to traffic conditions
Answer:
acceleration = - 150 m/s^2
distance = 9 miles.
Explanation:
initial speed, u = 60 mph
time, t = 12minutes = 0.2 hour
final speed, v = 30 mph
Let the acceleration is a and the distance is s.
By the first equation of motion
v = u + at
30 = 60 + a x 0.2
a = - 150 m/s^2
Let the distance is s.
Use third equation of motion is
[tex]v^2 = u^2 + 2 a s \\\\30^2 = 60^2 + 2 \times 150\times s\\\\s = 9 miles[/tex]
Which component of weight is cause for S.H.M of bob simple pendulum
Explanation:
The Simple Pendulum. A simple pendulum is defined to have a point mass, also known as the pendulum bob, which is suspended from a string of length L with negligible mass ((Figure)). Here, the only forces acting on the bob are the force of gravity (i.e., the weight of the bob) and tension from the string.
hope it helps you
A bicycle and a car start their journey at the same time the cyclist reaches it's top speed of 10mls in 15 the car reaches a speed if 15 MLS in55 which has the greater acceleration the car or the bicycle
Complete question is;
A bicycle and a car start their journey at the same time the cyclist reaches it's top speed of 10m/s in 15 s, the car reaches a speed of 15 m/s in 55 s. which has the greater acceleration the car or the bicycle.
Answer:
The bicycle has the greater acceleration.
Explanation:
Cyclist reaches a top speed of 10m/s in 15 s.
Formula for acceleration here is;
a = v/t
a = 10/15
a = 0.67 m/s²
Car reaches a speed of 15 m/s in 55 s.
Thus;
a = 15/55
a = 0.27 m/s²
From the 2 acceleration values gotten, we can say that;
The bicycle has the greater acceleration.
The search for black holes involves searching for The search for black holes involves searching for Group of answer choices single stars that emit large amounts of X-rays. a stellar core greater than 3 solar masses large spherical regions from which no light is detected. pulsars with periods less than one millisecond. pulsars that are orbited by planets.
Answer:
Large spherical regions from which no light is detected
Explanation:
A black hole is an object that has an extremely high density such that it possesses very powerful gravitational force that prevents the escape of all objects including light from it, and consumes nearby objects.
Due to the power of the gravitational force of a black hole, at the center, objects are infinitesimally compressed resulting in the inapplicability of the concept of space and time and the location is known as a singularity
Therefore, the search for black holes involves searching for large spherical regions from which no light is detected.
Margy is trying to improve her cardio endurance by performing an exercise in which she alternates walking and running 100.0 m each. If Margy is walking at 1.4 m/s and accelerates at 0.20 m/s2 during
Complete question is;
Margy is trying to improve her cardio endurance by performing an exercise in which she alternates walking and running 100.0 m each. If Margy is walking at 1.4 m/s and accelerates at 0.20 m/s² during one of the running portions, what is her final velocity at the end of the 100.0 m? Round your answer to the nearest tenth.
Answer:
6.5 m/s
Explanation:
We are told that she is walking at 1.4 m/s and accelerates at 0.20 m/s².
Thus;
Initial velocity; u = 1.4 m/s
Acceleration; a = 0.2 m/s²
Distance; s = 100 m
From Newton's equation of motion, we know that;
v² = u² + 2as
Where v is final velocity.
Thus;
v² = 1.4² + 2(0.2 × 100)
v² = 41.96
v = √41.96
v ≈ 6.5 m/s
A car travelling at 10ms ,acceleration uniformly at 2ms what will be its velocity after 5s?
[tex]we \: know \: that \\ acceleration = \frac{(final \: velocity - initial \: velocity)}{time} \\ = > a = \frac{(v - u)}{t} \\ = > 2m {s}^{ - 2} = \frac{{(v - 10m {s}^{ - 1} })}{5s} \\ = > 2m {s}^{ - 2} \times 5s = v - 10m {s}^{ - 1} \\ = > 10m {s}^{ - 1} = v - 10m {s}^{ - 1} \\ = > 10m {s}^{ - 1} + 10m {s}^{ - 1} = v \\ = > 20m {s}^{ - 1} = v \\ = > 20m {s}^{ - 1} = initial \: velocity[/tex]
Hope it helps!!
Thanks!!
Answer:
20 ms
Explanation:
You know
acceleration=2ms initial Velocity=10ms Time=5s
We are finding Final V
Use the equation Final v = (a x t) + initial v
2 x 5 = 10
10 + 10 = 20
If you are driving 90 km/hkm/h along a straight road and you look to the side for 2.8 ss , how far do you travel during this inattentive period
Answer:
Distance = 70 meters
Explanation:
Given the following data;
Speed = 90 km/h
Time = 2.8 seconds
Conversion:
90 km/h to meters per seconds = 90 * 1000/3600 = 90000/3600 = 25 m/s
To find the distance covered during this inattentive period;
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the formula;
[tex]Speed = \frac{distance}{time}[/tex]
Making distance the subject of formula, we have;
[tex] Distance = speed * time [/tex]
Substituting into the above formula, we have;
[tex] Distance = 25 * 2.8 [/tex]
Distance = 70 meters
The ability of a metal to react with air and water is a
property.
O chemical, physical, respectively
O physical, chemical, respectively
o physical, physical, respectively
O chemical, chemical, respectively
[tex]\bold{{Answer}}[/tex]
O physical, chemical, respectively
please buddy correct me if im wrong
The ability of a metal to react with air and water is a chemical, chemical, respectively property
What is a chemical change?A chemical change occur when the substance's composition is changed or when bonds are broken and new ones are forms a chemical change occur .
When a metal burn in air or react with air it form metal oxide and when metal react with water it forms oxides or hydroxides and release hydrogen gas . In both the cases change in composition is taking place . hence , bot are chemical reactions
correct answer is O chemical, chemical, respectively
learn more about chemical change
https://brainly.com/question/23693316?referrer=searchResults
#SPJ3
Two identical metallic sphere having unequal opposite charges are are placed
distance of 0.05m apart in air.
After bringing them in contact
with each other, they are again placed at the same distance apart, now the force of repulsion between them is 0.108 N. Calculate the final charge on each of them.
Answer:
Let the initial charges be q1 and q2 respectively.
After they come in contact, the charges are rearranged such that they acquire same charge.
let us say that charge on each of them is Q.
They are again brought apart at a distance of 0.9 m. Hence, the force between them will be given as
F = kQ2 / r2
0.025 = (9×109 x Q2) / 0.92
Q2 = 0.025 x 0.92 / 9×109
Q = 1.5 x 10-6 C
Explanation:
hey buddy, ❤can u plz subscribe to my UTube channel gtron9528 plz
The force that the left team pulls with is 1000 N. If the right team's total mass is 300 kg and they accelerate by 1.2 m/s2, what is the force of resistance on the right team
Answer:
the force of resistance on the right team is 360 N
Explanation:
Given;
force of the left team, = 1000 N
total mass of the right team, m = 300 kg
acceleration of the right team, a = 1.2 m/s²
The force of resistance of the right team is calculated as;
Force = mass x acceleration
Force, F = 300 x 1.2
Force = 360 N
Therefore, the force of resistance on the right team is 360 N
1. Use a micrometer to find the thickness of the foil you used. Do your data confirm the measured thickness? Determine the percentage difference between the measured thickness and the thickness you found in your experiment.
Answer:
Yes.
Explanation:
Yes, my data confirm the measured thickness because the micrometer measure precise thickness of any object. If the same instrument and right method is used for the measurement of the thickness of the foil then there is zero difference occur between the measured thickness and the thickness in your experiment so using right method can reduce or eliminate the difference between the measured thickness and the thickness in experiment.