Answer:
1. The tightness of the wire has no effect on the strength of the electromagnet
2. The strength increases with the number of coils
3. The strength of the electromagnet increases with the number of dry cells used
4. The strength of the electromagnet increases with the wideness of the nail but not the length of the nail
Explanation:
The strength of an electromagnet is given by the following relation;
[tex]B = \dfrac{\mu_0 \cdot K \cdot N \cdot I}{L}[/tex]
Where;
B = The magnetic field strength at the center
μ₀ = The magnetic permeability of free space = 4·π × 10⁻⁷ N·A⁻²
N = The number of loops formed by the conductor around the core
I = The current flowing through wire coiled around the nail
K = The magnetic permeability of the nail
L = The length of the coil
Therefore, we have;
1. From the above equation, the tightness of the wire coil around the nail (or the radius, 'R', of the wire) does not does not affect the magnetic field strength
2. The number of coils, 'N', is directly related to the magnetic field strength, 'B', and therefore, increasing the number of turns or coils around the nail, increases the magnetic field strength
3. The current in the circuit is directly related to the magnetic field strength and the number of dry cell used increases the current in the circuit and therefore, can increase the magnetic field strength
4. The size of the nail used in a solenoid and the magnetic field strength are directly related. The wider the nail, the stronger the magnetic field
Question 25 of 30
Three circuit diagrams are shown. Which statement about the circuit
diagrams is accurate?
Circuit A
Circuit B
Circuit C
V
VE
VE
R
A. Circuit A is a series circuit, and circuits B and C are parallel
circuits
B. Circuits A and B are series circuits, and circuit C is a parallel
circuit
OC. Circuits A and C are series circuits, and circuit B is a parallel
circuit.
O D. Circuits A, B, and C are all series circuits.
Answer:
it's B. circuit a and b are series circuit while c is parallel
Interpret the following graphs by answering the questions below.
a. The figure below shows the Standing waves
How many nodes and antinodes?
Answer:
Nodes = 5 and antinodes = 4
Explanation:
Nodes are the points of zero amplitude and appear to be fixed. On the other hand, antinodes are points on a stationary wave that oscillates with maximum amplitude.
In this given standing wave, there are 5 points where the amplitude is 0. So, there are 5 nodes. Also, there are 4 points where the amplitude is maximum.
So, there are 5 nodes and 4 antinodes.
11. The diagram to the right shows a harmonic of a
standing wave on a vibrating string.
Open the image for the rest :)
Answer:
(a) Fourth harmonic
(b) 2 wavelengths
(c) wavelength = 1 m
Explanation:
11.
(a) It is fourth harmonic.
(b) The distance between the two consecutive nodes is half of wavelength, so there are two wavelength.
(c) The distance between the two consecutive node or the antinode is half of wavelength.
So, wavelength = 2/2 = 1 m
A car starts from rest. if rhe final velocity becomes 50m /s after 10 second calculate the acceleration of the car.
Answer:5m/s² well I am not pretty sure but hope it's help
Explanation:
u=0m
final velocity ,v=50m/s
t=10s
(v-u)/t=(50-0)/10=50/10=5m/s²
I need to know how to do it
Answer:
1.76km
Explanation:
Here,
1mi = 1.6km
1.10 miles = 1.6 x 1.10 km
= 1.76 km
Explain the energy transformations that occur when accelerating in a gasoline
vehicle.
when a metal ball is heated through 30°c,it volume becomes 1.0018cm^3 if the linear expansivity of the material of the ball is 2.0×10^-5k^-1, calculate its original volume
which of the following items has the most inertia while at rest
Answer:
wats the following items
A 52 kg child on a swing is travelling at 6 m/s . What is his gravitational potential energy if he has 1000 J of the mechanical energy?
Answer:
The correct answer is "64 J".
Explanation:
The given values are:
Mass,
m = 52 kg
Velocity,
v = 6 m/s
Mechanical energy,
= 1000 J
Now,
The gravitational potential energy will be:
⇒ [tex]P.E=1000-\frac{1}{2}mv^2[/tex]
[tex]=1000-\frac{1}{2}\times 52\times (6)^2[/tex]
[tex]=1000-26\times 36[/tex]
[tex]=1000-936[/tex]
[tex]=64 \ J[/tex]
A converging lens can be defined as __________
a lens that causes parallel light rays to bounce off the surface
a lens that allows parallel light rays to pass without changing direction
a lens that causes parallel light rays to separate from each other
a lens that causes parallel light rays to focus at a specific location
Answer:
a lens that causes parallel light rays to separate from each other
Answer:
a lens that causes parallel light rays to focus at a specific location
I took the test and got it right! :)
who is invented compass
Answer:
A Chinese Geomancer
Explanation:
The compass was invented in China during the Han Dynasty between the 2nd century BC and 1st century AD where it was called the "south-governor" or "South Pointing Fish" (sīnán 司南). The magnetic compass was not, at first, used for navigation, but for geomancy and fortune-telling by the Chinese.
However, it is believed Flavio Gioia first invented the refined compass, and a monument has been erected in Almafi Italy to honor his invention. The magnetic compass was probably developed by combining the wind rose and the lodestone. From this device it is supposed the compass rose evolved.
Answer:
A Chinese Geomancer
Explanation:
The compass was invented in China during the Han Dynasty between the 2nd century BC and 1st century AD where it was called the "south-governor" or "South Pointing Fish" (sīnán 司南). The magnetic compass was not, at first, used for navigation, but for geomancy and fortune-telling by the Chinese.
However, it is believed Flavio Gioia first invented the refined compass, and a monument has been erected in Almafi Italy to honor his invention. The magnetic compass was probably developed by combining the wind rose and the lodestone. From this device, it is supposed the compass rose evolved.
1- Un avión vuela horizontalmente con una velocidad cuya magnitud es de 100 m/s y deja caer un proyectil desde una altura de 400 m con respecto al suelo. Determinar: a) El tiempo que transcurre antes de que el proyectil se impacte en el suelo. b) ¿Qué distancia horizontal recorre el proyectil después de iniciar su caída?
2- Se lanza horizontalmente un objeto con una velocidad de 80 m/s desde una altura de 160 m. Calcular: a) El tiempo que tarda en llegar al suelo b) La magnitud de la velocidad vertical que lleva a los 3 segundos. c) La distancia horizontal a la que cae el objeto a partir del punto desde que fue arrojada.
3- Se lanza un proyectil con una velocidad inicial de 80 m/s y una inclinación, sobre la horizontal, de 30°. Calcular: a) ¿Cuál es la altura máxima que alcanza la bala? b) ¿Cuáles son las posiciones, x y y, cuando han transcurrido 5 segundos?
4- Un joven patea una pelota contra un arco con una velocidad inicial de 20 m/s y con un ángulo de 45°. Determinar: a) cual es el alcance total
The surface tension of isopropyl alcohol in air has a value of 22.39 units and the surface tension of water in air is 72.86 units.
Answer:
The answer is "Option B and Option D"
Explanation:
Isopropyl alcohol has an air pressure of 22,39 units with such a water contact angle of 72,86 units.
The melting points of Isopropyl alcohol are higher than water because of the weaker forces between the previously studied.
The flatter meniscus is indeed the isopropyl ethanol so because forces between the particles are smaller.
What is the highest resistance that can be attained from 5 resistors of 4 ohm each?!
Answer:
Maximum resistance is obtained when resistors are connected in series. R= 1/5 + 1/5 + 1/5 +1/5 + 1/5 = 5/5 = 1ΩA 70 jug astronaut is floating free in space several meters from her spacecraft. She is holding a1.6 kg wrench which she can hurl with a speed of 22.0 m/s. What will be her speed towards the spacecraft?
Answer:
0.5 m/s
Explanation:
In solving this, we would be applying the principle of conservation of momentum. This states that momentum is conserved, and thus, Initial momentum has to be equal to the final momentum. This also means that it can be related by the formula
M * u = m * v, where
M = mass of the astronaut
m = mass of the wrench
u = speed of the astronaut
v = final speed of the wrench
70 * u m/s = 1.6 * 22 m/s
70u = 35.2 m/s
u = 35.2/70
u = 0.5 m/s
A 4.88 x 10-6 C charge moves 265 m/s
parallel (at 0°) to a magnetic field of
0.0579 T. What is the magnetic force
on the charge?
Answer:
[tex]F=0N[/tex]
Explanation:
From the question we are told that:
Charge [tex]Q=4.88 x 10-6 C[/tex]
Velocity [tex]v= 265m/s[/tex]
Angle [tex]\theta =0 \textdegree[/tex]
Magnetic field [tex]B=0.0579T[/tex]
Generally the equation for Force is mathematically given by
[tex]F=Q(\=v*\=B)[/tex]
[tex]F=qvBsin\theta[/tex]
Therefore
[tex]F=qvBsin0 \textdegree[/tex]
[tex]F=0N[/tex]
Answer:
0 newtons
Explanation:
When a moving charge is parallel to the magnetic field, it feels no Magnetic force at all.
Even if the Magnetic Field is 100,000,000 Tesla!
Help quick!!!! Which of the following is the best example of a thermodynamically closed system
Answer:
option (c).
Explanation:
A thermodynamical system is the system in which the system is closed and the volume is constant.
Here, the glass container which is sealed is the best example of thermodynamical closed system.
Which of the following could be used to create an open circuit?
Calculate the man’s mass. (Use PE = m × g × h, where g = 9.8 N/kg.)
A man climbs a wall that has a height of 8.4 meters and gains a potential energy of 4,620 joules. His mass is about
kilograms
Answer:
mass=56.12kg
Explanation:
PE=mgh
4620=m×9.8×8.4
make m subject of the formula...
m =4620/(9.8×8.4)
m=4620/82.32
m=56.12kg
A capacitor stores 7.77 x 10-7 J of
energy when 4.29 x 10-8 C of
charge is on the plates. What is the
voltage across the capacitor?
[?] V
No links please
Answer: [tex]36.22\ V[/tex]
Explanation:
Given
Energy in a capacitor [tex]E=7.77\times 10^{-7}\ J[/tex]
Charge [tex]Q=4.29\times 10^{-8}\ C[/tex]
Energy of a capacitor is given by
[tex]E=\dfrac{1}{2}CV^2=\dfrac{1}{2}QV\quad [\text{Q=CV}][/tex]
Insert the values
[tex]E=\dfrac{1}{2}QV\\\\\Rightarrow 7.77\times 10^{-7}=\dfrac{1}{2}\times 4.29\times 10^{-8}\times V\\\\\Rightarrow V=3.622\times 10\\\\\Rightarrow V=36.22\ V[/tex]
Thus, the voltage around the capacitor is [tex]36.22\ V[/tex]
4. Một nguồn điện ba pha đối xứng nối hình sao, điện áp ba pha nguồn Up = 220V. Nguồn điện cung cấp cho tải 3 pha đối xứng nối tam giác. Biết dòng điện dây Id = 10A. Tính điện áp dây, dòng điện pha của tải và của nguồn.
Answer:
so you gotta bring the 5 and add to 7
HELPPP I NEED HELP ASAP NOW
Answer:
Your answers would be
4. A. sperm and testosterone.
7. C. prostate, penis, Testes
uterus, vagina, fallopian tubes
10. B. Protein
11. A. carbohydrate
12. B. amino acids (I'm not positive on this i haven't taken bio in years
27. D. Respiratory system
Explanation:
yeah
Ciara is swinging a 0.015 kg ball tied to a string around her head in a flat, horizontal circle. The radius of the circle is 0.50 m. It takes the ball 0.70 seconds to complete one full circle. Calculate the tension in the string and its direction that provides the centripetal force acting on the ball to keep it in the circular path.
A. 0.60 N, along the line tangent to the circle
B. 0.015 N, along the line tangent to the circle
C. 0.60 N, toward the center of the circle
D. 0.015 N, toward the center of the circle
Answer:
Option C
Explanation:
From the question we are told that:
Mass [tex]m=0.015kg[/tex]
Radius [tex]r=0.5m[/tex]
Time [tex]t=0.70[/tex]
Generally the equation for Tension is mathematically given by
[tex]T=\frac{4mr}{t^2} \pi[/tex]
[tex]T=\frac{4*0.015*0.5}{(0.70)^2} (3.142)[/tex]
[tex]T=0.60N[/tex]
Therefore
[tex]T=0.60 N[/tex], toward the center of the circle
Option C
Answer:
0.60 N, toward the center of the circle
Explanation:
Got it right on the test.
The air also contains oxygen nitrogen and carbon dioxide what is the state of each of substance at -190°?
Answer:
oxygen - gas
nitrogen - liquid
carbon dioxide- gas
oxygen would be gas
nitrogen would be liquid
carbon dioxide would be gas
Two point charges are separated by a distance d. The first has a charge of
+2e, and the second has a charge of +3e. How does the electric potential
energy of the +2e charge change if it is moved to a new position, so that it is
separated from the second charge by a distance of 2d?
(PE- 1914, k- 900 x 10Nom? 10)
O A. The new electric potential energy is 4 times as strong as the
original electric potential energy.
B. The new electric potential energy is, as strong as the original
electric potential energy.
O c. The new electric potential energy is 2 times as strong as the
original electric potential energy.
D. The new electric potential energy is as strong as the original
electric potential energy.
.
D. The new electric potential energy is 1/2as strong as the original
electric potential energy.
True or false please help I’ll give brainliest
Answer:
1 is false 2 is true 3 is false
How to calculate displacement, velocity, acceleration.
One block rests upon a horizontal surface. A second identical block rests upon the first one. The coefficient of static friction between the blocks is the same as the coefficient of static friction between the lower block and the horizontal surface. A horizontal force is applied to the upper block, and its magnitude is slowly increased. When the force reaches 52.1 N, the upper block just begins to slide. The force is then removed from the upper block, and the blocks are returned to their original configuration. What is the magnitude of the horizontal force that should be applied to the lower block, so that it just begins to slide out from under the upper block
Answer:
F = 156.3 N
Explanation:
Let's start with the top block, apply Newton's second law
F - fr = 0
F = fr
fr = 52.1 N
Now we can work with the bottom block
In this case we have two friction forces, one between the two blocks and the other between the block and the surface. In the exercise, indicate that the two friction coefficients are equal
we apply Newton's second law
Y axis
N - W₁ -W₂ = 0
N = W₁ + W₂
as the two blocks are identical
N = 2W
X axis
F - fr₁ - fr₂ = 0
F = fr₁ + fr₂
indicates that the lower block is moving below block 1, therefore the upper friction force is
fr₁ = 52.1 N
fr₁ = μ N
a
s the normal in the lower block of twice the friction force is
fr₂ = μ 2N
fr₂ = 2 μ N
fr₂ = 2 fr₁
we substitute
F = fr₁ + 2 fr₁
F = 3 fr₁
F = 3 52.1
F = 156.3 N
I need help with question 6
Answer:
0.16 h
Explanation:
Speed: 25km per hour
Speed=distance/time
25=4/t
t=4/25
t=0.16 hour
t=9.6 minuites
Brainliest please~~
Mr. Tolman believes that our universe is expanding, but with all of the gravitational force from the celestial bodies of space, the universe will begin to contract. He believes in the _____.
A) oscillating universe theory
B) inflation theory
C) steady state theory
D) big bang theory