Position Collisions
Scenario 1: Fatima and Alberta are playing catch. Fatima is standing at
the door, while Alberta is standing 8m away to the right. Fatima throws a
paper ball to the right with a speed of 2.4m/s. Alberta realizes that she is
to far away and runs to the left at 0.6m/s. When and where will Alberta meet
the paper ball?

1.54 is the acceleration of the crate. The Second Newton's law states that an object acquires acceleration when an external unbalanced net force is applied to it.

That acceleration is proportional to the net force and inversely proportional to the mass of the object. It can be expressed with the formula: Where, Fn = Net force, m  = mass. The m=200 kg crate is pushed horizontally with a force Fa=700 N. The friction force opposes the motion and a horizontal net force appears causing the acceleration.

The forces in the vertical direction are in balance since the crate does not accelerate in that direction, thus the weight and the normal force are equal: N = W = mg, The friction force can be calculated by using the coefficient of friction μ: μ*n. Calculating the normal force: N = 200 * 9.8 = 1,960 N. The friction force is f=0.2*1960, f=392. The horizontal net force is 308. Finally, the acceleration is computed: m/s^2

To know more about the acceleration visit:-

brainly.com/question/13821209

#SPJ4

The electron feels a force upward as it passes between the charged plates and narrowly avoids striking the top plate. It just misses the to plate by a small amount as it moves higher.

The proton will accelerate less and miss the plates since it is more massive. We once more utilise the kinematic equation to determine the vertical displacement when it occurs for the plates.

y=1/2at²=1/2eE/mp(1.25×10-8s)

² \s=2.73×10-6m

As stated in (b), the proton won't collide with one of the plates because, despite the fact that the electric force felt by the proton and the electrons is identical, the electric force produces a smaller acceleration than g, making it plausible to disregard gravity.

To learn more about electron visit:

brainly.com/question/1255220

#SPJ4

Seeing the fur rubbed with the rod attracts neutral paper, this happens because the friction of the rod with the rubbed can produce a static electric force. It is this static electric force that causes the pieces of paper to be attracted and rod up.

If the rod or ruler has been rubbed into the hair, then brought closer to the paper, then the paper will lift and stick. Indeed, this can happen due to the presence of an electric charge. When you rub a plastic ruler over your hair, it becomes electrically charged, causing the paper to pull and stick.

The electric charge consists of two types of charge, namely negative charge, and positive charge. However, some objects have an equal amount of negative charge and positive charge. Objects that have the same amount of positive and negative charges are called neutral objects. Initially, a plastic ruler is also an electrically neutral object.

When you rub the ruler against dry hair, it gets an electric charge, because of that electric charge the plastic ruler can exert a force on the paper and pull it closer.

Learn more about the electric charge to the fur rubbed at https://brainly.com/question/389528

#SPJ4

The force needed is 29.2 N.

To calculate the force needed to accelerate a 9.35 kg bowling ball at a rate of 3.12 m/s²,

you can use the equation F = ma, where F is the force, m is the mass of the object (in this case, the bowling ball), and a is the acceleration. Putting in the values, you get:

F = (9.35 kg) x (3.12 m/s²)

  = 29.2 N

This works out to be approximately 29.2 Newtons of force.

To know about numericals related to this topic:-

https://brainly.com/question/29790570

The magnitude of the torque will increase as the angle between the force and the line of action of the torque approaches 90 degrees.

Torque is a measure of the rotational force acting on an object and is defined as the product of the force and the distance from the axis of rotation to the point where the force is applied. The torque is also proportional to the sine of the angle between the force and the line of action of the torque.

When the angle between the force and the line of action of the torque is 0 degrees, the torque is zero, as the force is acting in the same direction as the line of action of the torque. As the angle increases, the torque increases and reaches its maximum value when the angle is 90 degrees, at this point the sine of the angle is 1, so the torque is at its maximum value.

In practical terms, if you imagine a door knob, when you push or pull the door knob closer to 90 degree angle with the door, it will be harder to open or close the door, than when you push or pull the door knob at a small angle.

To know more about Torque click below:

brainly.com/question/6855614#

#SPJ4

When the outer wall moves at a speed of 3.0 m/s, and an 83-kg person feels a 545-N force pressing against his back then the radius of a chamber is 8.5 meters.

The radius of the chamber can be calculated using the equation

F = mv²/r, where F is the force felt by the person, m is the mass of the person, v is the velocity of the chamber and r is the radius of the chamber. In this case, F is 545 N, m is 83 kg, and v is 3.0 m/s.

Plugging in these values, we get

r= mv²/F

r= 83×3²/545

r = 8.5 m.

Therefore, the radius of the chamber is 8.5 m.

Learn more about force:

https://brainly.com/question/25239010

#SPJ4

The plane's speed at the end of 10.0 seconds is 200 m/s and the distance it has travelled is 1750 meters.

The initial speed of the plane, u = 150 m/s

Acceleration of the plane, a = 5 m/s²

Time, t = 10 sec

We can find the plane's speed at the end of 10. 0 seconds by the formula

a = (v - u)/ t

⇒5 = (v - 150)/ 10

⇒50 = v - 150

⇒v = 150 + 50

⇒v = 200 m/s

Now, to find the distance it has travelled we will use the kinematic equation

v² = u² + 2as

⇒200² = 150 ² + 2 × 5 × s

⇒40000 = 22500 + 10s

⇒17500 = 10 s

⇒s = 1750 m

To know more about kinematic, here

https://brainly.com/question/28037202

#SPJ4

It's unknown where the term "p" for momentum first appeared. Since m had already been used for "mass," it has been proposed that the p may have been derived from the Latin petere or from "progress".

The letter "I" would cause a misunderstanding between inertia and moment of inertia. The French and Germans selected "p" for momentum because of this.

The formula p = mv can be used to compute momentum, where p stands for momentum, m for mass, and v for velocity. The usage of the letter p to represent momentum has various benefits. First off, it would be unclear to use m for momentum because m stand for mass.

To know more about momentum visit:-

https://brainly.com/question/24030570

#SPJ4

The greater the mass of an object, the more particles there are in the sample and the more thermal energy it possesses at the same temperature. Assume you have some boiling hot water at 100 degrees Celsius to demonstrate this concept.

The energy contained inside a thermodynamic system is quantified as the quantity of energy required to get the system from its standard internal state to its current internal state of interest, accounting for energy gains and losses owing to changes in its internal state, including magnetization.  

It eliminates the kinetic energy of motion and the potential energy of the system's overall location in relation to its surroundings and external force fields.

Learn more about internal energy  to visit this link

https://brainly.com/question/11278589

#SPJ4

When the amplitude of a body undergoing simple harmonic motion is doubled then the maximum speed is doubled.

Equation of shm is

x(t) = Xo + Acos(wt + f)

Differentiate it with t

v(t) = wA * sin(wt + f)

Then max speed Vmax is wA

So by above relation if we double the amplitude then velocity will be doubled.

If the force acting on the oscillating body is always in the direction opposite to the displacement of the body from the equilibrium or the mean position and its magnitude is proportional to the magnitude of displacement, the body is said to be executing SHM.

If the displacement vs. time curve of the oscillating body is sinusoidal in nature, the body is said to be executing SHM. This is another definition of SHM.

If the potential energy of the oscillating body is proportional to the square of its displacement with reference to the mean position, the body is said to be executing SHM. This is yet another definition of SHM.

To know more about simple harmonic motion here

https://brainly.com/question/23603440

#SPJ4

Yes, the center of the Milky Way is the most densely populated area of stars, and is therefore the most likely region to find newly formed stars.

What is the populated?

Populated refers to an area that has a large number of people residing in it. It is usually used to describe cities, towns, or other densely populated areas. Populated areas usually contain a variety of services and infrastructure to support their populations, such as schools, hospitals, transport links, and other amenities. Populated areas usually have higher rates of crime, pollution, and other problems associated with increased human activity.Populated refers to an area that has a high density of people living in it. It is usually used to describe cities and towns, but can also describe smaller areas, like neighborhoods.

To learn more about populated

https://brainly.com/question/13045510

#SPJ4

The missing value is D. 98

The table provides information about the speed (m/s), frequency (Hz), and wavelength (m) of a sound wave generated by a musical note, in different mediums (air, glass, and brass). The frequency of the sound wave is constant across the three mediums, but the speed and wavelength will vary depending on the medium. Since we know the frequency and wavelength, we can use the formula:

Speed = Frequency x Wavelength

to find the missing value of the speed of the sound wave in brass.

4,700 = 55 x Wavelength

Wavelength = 4,700/55 = 85.818...

So the missing value is 98 (approximately) in the table.

Learn more about sound waves here: https://brainly.com/question/1199084

#SPJ4

The formula that shows the relationship between the surface area (S) and volume (V) for spheres is S = 4πr² and V = (4/3)πr³ where r is the radius of the sphere.

This formula shows that the surface area of a sphere is directly proportional to the radius squared, and the volume is directly proportional to the radius cubed. This means that as the radius of a sphere increases, the surface area and volume will increase at a much faster rate. For example, a sphere with a radius of 2 will have four times the surface area and eight times the volume of a sphere with a radius of 1.

The question is incomplete, hence the answer is general.

Learn more about volume of the spheres here: brainly.com/question/22807400

#SPJ4

The distance traveled before the car comes to a stop is 66.66 m. It's important to note that the negative sign on acceleration indicates that the car is slowing down.

To find the distance traveled before the car comes to a stop, we can use the formula for distance traveled under constant acceleration. The formula is:

Distance = initial velocity * time + (1/2) * acceleration * time^2

The car is traveling at an initial velocity of 20 m/s and the acceleration is given by the function -6.0t, where t is the time in seconds.

We can find the time it takes for the car to come to a stop by setting the final velocity to 0 and solving for t.

0 = 20 + (-6.0)t

t = 20/6

t = 3.333 s

Now that we have the time, we can substitute it back into the distance formula along with the initial velocity and acceleration:

Distance = 20 * 3.333 + (1/2) * -6.0 * (3.333)^2

Distance = 66.66 m

The reaction distance for a vehicle traveling at 60 mph on the highway is 312 feet, and the reaction distance for a vehicle traveling at 80 mph is 496 feet. Simply put, at current speeds, doubling the car's speed will result in a three-fold increase in stopping distance.

to know more about distance here:

brainly.com/question/15131368

#SPJ4

By calculating carbon emissions reduction and sustainability index improvement, the Accenture MyNav Green Cloud Advisor incorporates sustainability when moving client data centers to the cloud.

The availability of computer system resources without the user having to manage them directly is referred to as cloud computing. The network of remote servers located on the internet in this instance aids in the management and storage of the data.

Mynav Green Cloud Advisor is essential since it aids businesses in creating cloud solutions that may be utilized to lower carbon emissions.

As cloud solutions are essential to businesses, Accenture MyNav Green Cloud Advisor integrates sustainability.

To learn more about Accenture and sustainability from given link

https://brainly.com/question/24918185

#SPJ4

Bill James came up with the Pythagorean Theorem of Baseball, which connects the amount of runs a club has scored and given up to its actual winning %.

The Pythagorean Theorem is the idea that a baseball team's record may be roughly estimated by taking the square of team runs scored and dividing it by the square of team runs scored plus the square of team runs allowed. Bill James, a baseball analyst, made this idea famous.

The Pythagorean Winning % approach uses the relationship between a team's victories and losses and the number of points scored and allowed to calculate the predicted winning percentage. To follow Pythagorean winning percentages for the seasons, consult the team statistics.

To learn more about Pythagoras theorem visit:

brainly.com/question/343682

#SPJ4

The work done to launch the motion of both the hammer and the bullet are 3.1×10³ Joule and 2.2×10² Joules respectively.

As we know,

Work = Kinetic Energy

         = (0.5)(mv^2)

For Work in Joules, the mass is in units of Kg, and the velocity is in units of m/s.

KE(hammer) = 1/2mv^2 = 1/2 x 7.3 x (29)^2 = 3.1 x 10^3 J

and KE(bullet) = 1/2mv^2 = 1/2 x 2.6 x 10^-3 x (410)^2 = 2.2 x 10^2 J

To solve this problem, we must assume that energy is conserved. (This isn't stated in the problem, and is not true in general in these real-world examples, however we must assume conservation of energy in order to solve the problem with the information given).

When an object moves while a force is being exerted on it, then work is being done on the object by the force. If an object moves through a displacement d while a constant force F is acting on it, the force does an amount of work equal to W = F · d = F d cos φ where φ is the angle between d and F.

To know more about work done here

https://brainly.com/question/22116319

#SPJ4

Answer:

15 seconds :)

Explanation:

Correct option is A)  The objects always attract each other.

There is always a pull from gravity. It won't repel.

A mass attracts a mass; the amount of the gravitational force is directly proportional to the masses of the two items and inversely proportional to the square of the distance between the two objects. Gravitational force is an attractive force that exists between all objects with mass.

A rise in one quantity causes a fall in the value of the other since the two values are inversely proportionate. In other words, as the separation distance increases, the force of gravity decreases, and as the separation distance decreases, the force of gravity increases.

To learn more about Gravitational attraction from given link

https://brainly.com/question/15257710

#SPJ4

A Shuttle astronaut is sent to repair a defective relay in a 600. 00- kg satellite that is traveling in space. The combined velocity when the astronaut grabs hold of the satellite is 17,004.4 m/s.

The combined velocity of the astronaut and the satellite when the astronaut grabs hold of the satellite is the relative velocity between the two objects. The relative velocity can be calculated using the principle of conservation of momentum. The principle states that the total momentum of an isolated system remains constant if no external forces act on it.

The initial momentum of the satellite is

= (600.00 kg) * (17,000.0 m/s)

= 10,200,000 kg*m/s

The initial momentum of the astronaut and the MMU is

= (400.00 kg) * (17,010.0 m/s)

= 6,804,400 kg*m/s

The final momentum of the combined system is

= (600.00 kg + 400.00 kg) * v,

where v is the final velocity of the combined system.

The conservation of momentum equation:

=> initial momentum = final momentum

= 10,200,000 kgm/s + 6,804,400 kgm/s

= (1000 kg) * v

= v

= (10,200,000 + 6,804,400) / 1000

= v

= 17,004.4 m/s

So, the combined velocity of the astronaut and the satellite when the astronaut grabs hold of the satellite is 17,004.4 m/s.

It's important to note that the relative velocity is the same in both directions, this is a vector quantity and direction is important.

To know more about velocity please refer: https://brainly.com/question/18084516

#SPJ4

The astronaut being pushed back into his seat as the rocket accelerates - this was the  example of Newton's first law of motion.

According to Newton's First Law, a body in uniform motion or at rest will remain in that state up to and unless a net external force acts on it.

When the astronaut  worked at the space center launching rockets, no force is worked on him. When the rocket accelerates, according to  Newton's first law of motion, the astronaut remains in same motion, that's why, he pushed back into his seat .

Learn more about s Newton's first law of motion here:

https://brainly.com/question/29775827

#SPJ1

The acceleration is 3 [tex]m/s^2[/tex] when a block with a mass of 5 kg is pulled with a force of 15 n.

The block will experience a net external force of 15 N due to the frictionless surface it is kept in place on.

The block weighs 5 kg.

F = m × a

There is a net external force (F), mass (m), and acceleration acting on the object in this situation (a).

Using the appropriate values in place of F and m:

15 = 5 × a

15/5 = a

3=a

Taking 5 as a factor, we get 3 = a.

As a result, a 5-kilogram item is drawn over a friction less surface with an acceleration of 15 N is 3 m/s².

For such more question on acceleration.

https://brainly.com/question/14344386

#SPJ4

If the braking force is 10000 N, 90 meters is far the car travel before stopping.

When an object interacts with another object, it experiences a push or pull known as a force. Every time two objects come into contact, a force is applied to each one of them.  Actual forces can only be created by interaction.

The definition of energy is "the ability to do work, which is the capability to apply a force causing the displacement of an object." Despite this vague description, energy simply refers to the power that propels motion.

Given that,

Mass of automobile = 2000 kg

speed = 30 m/s

Braking force = 10000 N

For, The acceleration is

Using newton's formula

Where, f = force

m= mass

a = acceleration

Put the value of F and m into the formula

-10000 = 2000*a

The braking force is visible in the negative sing.

It demonstrates that the force's direction is the inverse of the motion.

a = -10000/2000

a = -5m/s2

For the distance,

Using third equation of motion

[tex]v^{2} - u^{2} = 2as[/tex]

[tex]0- 30^{2} = 2 * (-5) *s[/tex]

s = 90m

Consequently, the automobile went 90 meters before coming to a stop.

Learn more about force from the given link:

https://brainly.com/question/388851

#SPJ4

Dynamic flexibility tests are not used as often as static flexibility tests because dynamic flexibility tests involve movement, while static flexibility tests are stationary.

Dynamic flexibility tests are more difficult to perform and require more coordination, and they can be less reliable than static flexibility tests. Additionally, dynamic flexibility tests require more time and equipment to administer, making them less practical for most fitness assessment settings.

Also, dynamic flexibility tests are more specific and measure the ability to perform a specific movement, rather than measuring the general range of motion of a joint. This makes them more suitable for testing athletes and those who need to measure their ability to perform specific movements.

Learn more about Dynamic flexibility :

https://brainly.com/question/1234108

#SPJ4

94.32m/s is the average speed (in m/s) of the blade tip in the helicopter's frame of reference.

We discover that the sub average is 73.3 metres per second after entering this formula into our calculator and finding it to three significant numbers. The helicopter blade tip travels at an average speed of that.

After one revolution, the blade point has moved nothing since it goes back to its original position. The average velocity is consequently zero.

FPM = RPM x . 262 x Blade Diameter (inches).

FPM = 120 x . 262 x 3.00 = 94.32m/s

To know more about average speed visit:-

https://brainly.com/question/12322912

#SPJ4

Torque is calculated using the moment arm is Torque =Lever Arm x Fy (or Force sin( )) Torque = Force (Fm) x Moment Arm.

Calculating Torque: The formula for torque is =|r| |F|sin = | r | | F | sin, where |r| is the size of the lever arm, |F| is the size of the force vector, and is the angle created between the two vectors.

In mechanics, they have slightly different meanings but the same meaning in physics. The moment is a static force, whereas the torque is a moving force, even though they both have the same unit, N-m. Torque is utilized when there is rotation, whereas moment is used when there isn't.

To know more about Torque visit:-

https://brainly.com/question/28220969

#SPJ4

Accenture can assist its clients in being more sustainable thanks to the myNav. By making it easier to create cloud solutions that lower carbon emissions by rearranging manufacturing facilities such that carbon emissions can be calculated with ease.

by establishing new corporate efforts to lower transportation expenses and by establishing new rules for the disposal of out-of-date technology.

Accenture can assist its clients in becoming more sustainable by using mynav to locate, assess, architect, and simulate an end-to-end solution at scale.

reduces the expense of transportation

creates a design that is appropriate and aids the customer in becoming more sustainable.

establishes sustainable guidelines for disposing of outdated technology.

myNav Green Cloud Advisor assists businesses in developing cloud solutions that cut carbon emissions and create a platform for ethical innovation. Green Cloud Advisor starts by establishing a baseline for the energy usage, compute needs, and sustainability objectives of current data centers. through promoting the development of cloud technologies that cut down on carbon emissions

To learn more about Accenture myNav from given link

https://brainly.com/question/26449898

#SPJ4

The frequency of the red light emitted by a neon sign with a wavelength of 659.9 nm is 4.5×10^14 Hz.

The frequency is the number of times a recurring occurrence takes place during a predetermined period. For example, if an event occurs twice in one second, then the frequency is 2 Hz (Hertz).

A recurring event's frequency is the number of times it happens in a predetermined period. For example, a frequency of a wave is the number of wave peaks passing a fixed point in one second.

The frequency is the number of times something occurs in a given period. For example, the frequency of a radio station is the number of times it broadcasts a signal per second.

Given:

Wavelength = 659.9nm

Speed of light = 3×10^8 m/s

Frequency = speed of light / wavelength

Frequency = (3.0 x 10^8 m/s) / (659.9 nm)

Frequency = 4.5 x 10^14 Hz

To know more about frequency visit:

brainly.com/question/29213586

#SPJ4

it takes about 26 seconds for speed of light with approximate speed of 3\times10^5  kilometers per second to reach Jupiter.

To calculate the time it takes light to reach Jupiter, we need to know the distance between the Sun and Jupiter. The average distance between the Sun and Jupiter is approximately 778 million kilometers. We can use the formula distance = speed x time to calculate the time it takes for sunlight to reach Jupiter. We know that the speed of light is approximately 3x10^5 kilometers per second and the distance between the Sun and Jupiter is 778 million kilometers.time = distance / speed

time = (77810^6 km) / (310^5 km/s)

time = 26 sec (approximately)

Therefore, it takes about 26 seconds for light to reach Jupiter.

learn more about speed of light here:

https://brainly.com/question/28224010

#SPJ4

A tornado lifts a truck 252 m above the ground. As the storm continues, the tornado throws the truck horizontally. It lands 560 m away from where it was picked up. The truck will travel at -78.1 m/s and its time of flight is 17.44 seconds.

Distance of any body or an object is the total path covered by it in a particular time. We can calculate the distance of any object covered by it using the equations of motion in our question. we can also convert equation of motion in our favor to find our answer in a proper format to find our answer by the proper use of equation of motion. By this information we can formerly consider that a tornado lifts a truck 252 m above the ground. As the storm continues, the tornado throws the truck horizontally. It lands 560 m away from where it was picked up. The truck will travel at -78.1 m/s and its time of flight is 17.44 seconds.

Initial velocity = 0 , initial height = 252

[tex]dy = u\times t + \frac{1}{2} at^{2}[/tex]

[tex]dy = u\times t +0.5 gt^{2}[/tex]

[tex]252 =0+ 4.9t^{2}[/tex]

t = 7.17 seconds

horizontal:

v = [tex]\frac{dx}{t} =560\times7.17=[/tex]=78.103 m/s

To the nearest tenth; 78.1 M/s

Learn more about distance:

brainly.com/question/15172156

#SPJ4