PCR amplification utilizes ________ template to produce a ________ product. For this question, select the answer that best describes the process as a whole: the nature of the template you used (the starting template added to the reaction) and the nature of the final product produced in your PCR analysis that you ran out on a gel will apply here.

Answers

Answer 1

Answer:

Double-stranded/Double-stranded

Explanation:

The PCR which is popularly known as polymerase chain reaction is the technique that uses the single copy of DNA to make thousands or levels a huge number(in terms of millions) of duplicates of that DNA.  

The PCR is a laboratory procedure that is utilized to make various duplicates of a section of DNA as depicted previously. It is an unmistakable strategy.  

There are 3 fundamental advances in PCR:

Denaturing  

Annealing  

Extending  

In denaturing measure requires warming of the double-stranded DNA template to isolate it into a solitary strand. Eventually, it resulted into a double-stranded item.


Related Questions

What is the formula for Dicarbon trioxide

Answers

Answer:

diboron trioxide Formula: B 2 O 3 Molecular weight: 69.620 CAS Registry Number: 1303-86-2

Explanation:

hope that helps you╰(*°▽°*)╯

Consider the fatty acid. A carboxylate salt is attached to a 19 carbon chain, where double bonds are present between carbons 5 and 6, between carbons 8 and 9, between carbons 11 and 12, and between 14 and 15. The carboxylate carbon is carbon 1. All double bonds are cis. Which of the designations are accurate for the fatty acid

Answers

Answer:

ω-3 fatty acid and 19:4(Δ5,8,11,14)

Explanation:

From the image attached below:

We can see the structure of the delta nomenclature showing the numbers of carbons, numbers of double bonds, and the locations of the double bonds in the structure of the carboxylate salt.

Also, we can see the structure of the fatty acid where; the location of the first double bond from the methyl end is shown.

Hence, the designation which are accurate for these structures are:

ω-3 fatty acid and 19:4(Δ5,8,11,14)

Express
as
ordinary numbers.
3 x 10^0=

Answers

any number to the power of zero is equal to 1
so 10^0=1 and 3 x 1 = 3 !

Solid iron is mixed with a solution of copper (I) nitrate to form iron (III) nitrate solution and metal copper. (what is the equation)

Answers

Answer:

Fe + 3CuNO₃ → Fe(NO₃)₃ + 3Cu

Explanation:

Solid Iron = FeCopper (I) nitrate = CuNO₃ (Nitrate, NO₃⁻, always has a charge of -1).Iron (III) nitrate = Fe(NO₃)₃ (That way the compound has an overall neutral charge)Metal Copper = Cu

Writing the equation using symbols leaves us with:

Fe + CuNO₃ → Fe(NO₃)₃ + Cu

It is not balanced yet. Now we balance the NO₃ species on the left side:

Fe + 3CuNO₃ → Fe(NO₃)₃ + Cu

Finally we balance the Cu species on the right side:

Fe + 3CuNO₃ → Fe(NO₃)₃ + 3Cu

Calculate the mass of calcium chloride that contains 3.20 x 1024 atoms of chlorine.

Answers

Answer:

294.87 gm  CaCl_2

Explanation:

The computation of the  mass of calcium chloride is shown below:

But before that following calculations need to be done

Number of moles of chlorine atom is

= 3.20 × 10^24 ÷ 6.022 × 10^23

= 5.314 moles

As we know that

1 mole CaCl_2 have the 2 moles of chlorine atoms

Now 5.341 mole chloride atoms would be

= 1 ÷ 2 × 5.314

= 2.657 moles

Now

Mass of CaCl_2 = Number of moles × molar mass of  CaCl_2

= 2.657 moles × 110.98 g/mol

= 294.87 gm  CaCl_2

Calculate the [OH-] in a solution that has a pH of 3.08.
a. 1.2x10-9
b. 8.3x10-3
C. 1.2x10-11
d. 8.3x10-4

Answers

Answer:

C. 1.2 x 10^-11

Explanation:

pOH = 14 - pH = 14 - 3.08 = 10.92

[OH-] = 10^-pOH = 10^-10.92 = 1.2 x 10^-11

1. Chlorofluorocarbons (CFCs) are of interest because of their ability to destroy ozone molecules. A carbon-chlorine bon din the CFC molecule can be broken by sunlight, leaving a highly reactive free radical which then goes on to destroy the surrounding ozone molecules. The energy of a C-Cl bond is 328 kJ/mole. Calculate the wavelength of light needed to break a bond in a single molecule. In which region of the spectrum (infrared, visible, UV) does this wavelength fall

Answers

Answer:

See explanation

Explanation:

Energy of the photon (E) = 328 * 10^3/6.02 * 10^23 = 5.45 * 10^-19 J

Recall that E = hc/λ

h = Plank's constant = 6.36 * 10^-34 Js

c = speed of light = 3 * 10^8 m/s

λ = ??

λ = hc/E

λ = 6.36 * 10^-34 * 3 * 10^8/5.45 * 10^-19

λ = 3.5 * 10^-7 m

This falls into the UV region of the spectrum

As student used a pen to draw a line across a piece of chromatography paper. he then placed a sample of dye on the drawn line for analysis . is the student doing the right thing? why?​

Answers

Answer is in the photo. I can only upload it to a file hosting service. link below!

tinyurl.com/wpazsebu

MATch THE BOXED PLEASEEEE

Answers

Answer:

Transform = The third one

Convergent  = the first one

Divergent = the second one

Explanation:

divergent: divide (separate)
convergent: collide
transform: slide past

Consider a different situation. An ice cube is placed in a cup, and the cup is filled to the brim with mineral oil, which has a density of 0.8 g/cm3. The density of ice is about 9% less than the density of liquid water, which is about 1 g/cm3. After the ice melts, what will happen to the level of the water/oil mixture in the cup

Answers

‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♂️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️‍♀️

What do scientist use to classify organisms?

Answers

Answer:

a Binomial Naming System

Explanation:

Scientists use a two-name system called a Binomial Naming System. Scientists name animals and plants using the system that describes the genus and species of the organism. The first word is the genus and the second is the species.

In a neutralization reaction, bases donate.

Answers

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: I think it is hydroxide ion but im not sure

Explanation:

I hope this helped!

<!> Brainliest is appreciated! <!>

- Zack Slocum

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Question 18 of 20
Which statement explains why a chemical equation must be balanced?
A. It must show how each chemical formula is written to accurately
represent each substance.
B. It must show that coefficients and subscripts can be used in
chemical formulas.
O C. It must show that the mass of each element involved is conserved
by a chemical reaction.
O D. It must show the reactants and products on the correct sides of
the reaction arrow.
SUBMIT

Answers

Answer:

d.It must show the reactants and products on the correct sides of

the reaction arrow

Explanation:

hope it helps

Why it is true to say that calcium carbonate has both ionic and covalent bonds?​

Answers

Answer:

Calcium carbonate is an ionically bonded compound.

Covalent Bond: This bond is formed because atoms share a pair of electrons through an orbital.

what are the twa parts of central nervous system ?​

Answers

the brain and the spinal cord

Answer:

The nervous system has two main parts: The central nervous system is made up of the brain and spinal cord.

Explanation:

Amanda inserted the gel tray with the well towards the red ( ) end of the chamber during gel electrophoresis and carefully pipetted her samples into the wells as indicated in the lab directions. After viewing her gel under UV light, she did not find bands in the regions that she was expecting. What did she most likely see in her gel results and why

Answers

Answer:

hello the options related to your question is missing attached below is the complete question with the options

answer:

Any visible bands were found in the small area above the wells instead in the expected large bottom area of the gel, because Amanda should have placed the wells into the black (-) end of the chamber for DNA to move towards the opposite red (+) end of the gel.   (  2 )

Explanation:

Why Amanda did not see any bands in the region that she was expecting is because during electrophoresis ( which allows the distinguishing of various lengths of DNA fragments on a gel )  the DNA been negative will migrate to the positively charged  electrodes and  The shorter brands will move faster through the gel, providing DNA fragments arrangements on the gel according to size.

The fizz in the soda that we drink is carbonic acid. Leaving the soda can open to the environment separates the carbonic acid into water and carbon dioxide. What type of reaction is this and what is the resulting product?

Answers

Answer:

The reactionnis known as a decomposition reaction

The equation of the reaction is given below as:

H₂CO₃ -----> H₂O + CO₂

Explanation:

A reaction in which a single compound is split into two or more simpler substances is known as a decomposition reaction.

In the reaction in which when a soda can is opened and left to the environment, the fizz in the soda, carbonic acid, separates into water and carbon dioxide is an example of a decomposition reaction.

The equation of the reaction is given below:

H₂CO₃ -----> H₂O + CO₂

In the reaction above, a larger molecular weight compound, carbonic acid with the molecular, H₂CO₃ is splits into two simpler substances of smaller molecular weight, water, H₂O and carbon dioxide, CO₂.

This reaction rate is made faster by an increase in temperature and by a decrease in pressure of the soda.

Calculate the pH and percent ionization of a HC2H3O2 solution with a concentration of 0.500 M. (Ka = 1.8 x10-5)

Answers

Answer:

I can not see the file

Explanation:

At what temperature (in K) does NH₃ have a density of 0.812 g/L at 1.17 atm?

Answers

Answer:

The temperature is "298.51 K".

Explanation:

The given values are:

Density of ammonia,

d = 0.812 g/L

Pressure,

P = 1.17 atm

Mass:

M = [tex]NH_3[/tex]

   = [tex]14+ 1\times 3[/tex]

   = [tex]17[/tex]

As we know,

⇒ [tex]PV=nRT[/tex]

∴  [tex]T=\frac{PV}{nR}[/tex]

       [tex]=\frac{PV}{\frac{W}{M}\times R }[/tex]

       [tex]=\frac{PVM}{W\times R}[/tex]

By putting the value of "W", get

       [tex]=\frac{PVM}{V\times d\times R}[/tex]

       [tex]=\frac{P\times M}{d\times R}[/tex]

On substituting the values in the above equation, we get

       [tex]=\frac{1.17\times 17}{0.812\times 0.08205}[/tex]

       [tex]=\frac{19.89}{0.06699}[/tex]

       [tex]=298.51 \ K[/tex]

Answer:

299

Explanation:

Or 298.51 to be exact!

How many moles of silver atoms are in the piece of jewelry?

Answers

moles contains 6.02 x 10^23 silver atoms

so moles = (5.29 X 10^22)/ (6.02 x 10^23)
= 5.29/6.02 x 1/10

The number of moles of silver atoms in the piece of jewelry is 0.08784 moles

Here is the complete question:

Suppose a piece of jewelry contains 5.29 × 10²² atoms of silver  . How many moles of silver atoms are in the piece of jewelry?

From the question,

A piece of jewelry contains 5.29 × 10²² atoms of silver.

To determine number of moles of silver atoms in the piece of jewelry,

We will use the formula

[tex]Number \ of \ moles = \frac{Number \ of \ atoms }{Avogadro's \ number}[/tex]

From the question

Number of atoms of silver = 5.29 × 10²² atoms

and

Avogadro's number = 6.022 × 10²³ atoms/mole

∴ [tex]Number \ of \ moles \ of \ silver \ atoms= \frac{5.29 \times 10^{22} }{ 6.022 \times 10^{23} }[/tex]

Number of moles of silver atoms = 0.08784 moles

Hence, the number of moles of silver atoms in the piece of jewelry is 0.08784 moles

Learn more here: https://brainly.com/question/10982975

 

calculate the percentage mass of potassium in potassium chloride, KCI​

Answers

the percent composition of potassium chloride, KCl, can be calculated from the atomic weights of potassium and chlorine and the formula weight of KCl.


Formula weight of KCl: 39.10 g + 35.45 g = 74.55 g


Percent potassium: 39.10 g K
74.55 g KCl X 100% = 52.45% potassium


Percent chlorine: 35.45 g Cl
74.55 g KCl X 100% = 47.55% chlorine

Name each of the following molecular binary compounds:
01. CaCl2 01. hydroiodic acid
02. HI (g) 02. hydrogen monoiodide gas
03. HI (aq) 03. diiodine tetraoxide
04. BH3 04. bromine monofluoride
05. Cl2O6 05. silicon tetrahydride
06. ClF 06. tetraphosphorus hexaoxide
07. P2Cl4 07. disulfur monoxide
08. I2O5 08. carbon monooxide
09. BrF5 09. hydrogen monochloride gas
10. HBr (aq) 10. tetraphosphorus decaoxide
11. IF7 11. dibromine monoxide
12. NF3 12. dinitrogen tetrafluoride
13. H2Se (aq) 13. disilicon hexahydride
14. BrCl 14. tetraarsenic hexaoxide
15. H2Se (g) 15. hydrochloric acid
16. SnO2 16. arsenic trihydride
17. HBr (g) 17. iodine heptafluoride
18. AsF3 18. bromine dioxide
19. N2O3 19. disulfur decafluoride
20. IF5 20. dichlorine heptaoxide

Answers

Answer:

Explanation:

From the given information; we are to assign the correct naming for the molecular binary compounds.

01. CaCl2 → Calcium CHloride

02. HI (g) → Hydrogen mono iodide gas

03. HI (aq) →  Hydroiodic acid

04. BH3 → Borontrihydride

05. Cl2O6 → Dichlorine hexoxide

06. ClF → Chlorine monoflouride

07. P2Cl4 → Phosphorus tetrachloride

08. I2O5 → Diiodine pentaoxide

09. BrF5 → Bromine pentaflouride

10. HBr(aq) → Hydrobromic acid

11. IF7 → Iodine heptaflouride

12. NF3 → nitrogen triflouride

13. H2Se(aq) → hydroselenic acid

14. BrCl → Bromine monochloride

15. H2Se(g) → Hydrogen Selenide

16. SnO2 → Tindeoxide

17. HBr(g) →  Hydrogenbromide gas

18. AsF3 → Arsenic triflouride

19. N2O3 → Dinitrogentrioxide

20. IF4 → Iodine pentafluoride

01. hydroiodic acid  → HI (aq)

02. hydrogen monoiodide gas → HI (g)

03. diiodine tetraoxide → I2O4

04. bromine monofluoride → BrF

05. silicon tetrahydride  → SiH4

06.  tetraphosphorus hexaoxide → P4O6

07. disulfur monoxide → S2O

08. carbon monooxide → CO

09. hydrogen monochloride gas → Hcl

10. tetraphosphorus decaoxide → P4O10

11. dibromine monoxide → Br2O

12. dinitrogen tetrafluoride → N2F4

13. disilicon hexahydride → SiH6

14. tetraarsenic hexaoxide → As4O6

15. hydrochloric acid → HCl (aq)

16.  arsenic trihydride → AsH3

17. iodine heptafluoride → IF7

18. bromine dioxide → BrO2

19. disulfur decafluoride → S2F10

20. dichlorine heptaoxide → Cl2O7

Balance C3H8 + O2 + CO2 + H2O

Answers

Assuming the second plus sign is a typo and was meant to be a reaction arrow, this would be the balanced equation:

C3H8 + 5O2 —> 3CO2 + 4H2O

Calculate the wavelength for the transition from n = 4 to n = 2, and state the name given to the spectroscopic series to which this transition belongs?

Answers

Answer:

The wavelength for the transition from n = 4 to n = 2 is 486nm and the name  name given to the spectroscopic series belongs to The Balmer series.

Explanation

lets calculate -

Rydberg equation-   [tex]\frac{1}{\pi } =R(\frac{1}{n_1^2} -\frac{1}{n_2^2})[/tex]

where ,[tex]\pi[/tex] is wavelength , R is Rydberg constant ( [tex]1.097\times10^7[/tex]), [tex]n_1[/tex] and [tex]n_2[/tex]are the quantum numbers of the energy levels. (where [tex]n_1=2 , n_2=4[/tex])

Now putting the given values in the equation,

                [tex]\frac{1}{\pi }=1.097\times10^7\times(\frac{1}{2^2} -\frac{1}{4^2} )[/tex][tex]=2056875m^-^1[/tex]

    Wavelength [tex]\pi =\frac{1}{2056875}[/tex]

             =[tex]4.86\times10^-^7[/tex] = 486nm

   Therefore , the wavelength is 486nm and it belongs to The Balmer series.

POS MOLECULES SPEED UP WHEN ENERGY IS CREATED AND SLOW DOWN WHEN ENERGY IS DESTROYED True False? explain why​

Answers

Answer: Scientists use the term bioenergetics to describe the concept of energy flow (Figure 4.2) through living systems, such as cells. Cellular processes such as the building and breaking down of complex molecules occur through stepwise chemical reactions. Some of these chemical reactions are spontaneous and release energy, whereas others require energy to proceed. Just as living things must continually consume food to replenish their energy supplies, cells must continually produce more energy to replenish that used by the many energy-requiring chemical reactions that constantly take place. Together, all of the chemical reactions that take place inside cells, including those that consume or generate energy, are referred to as the cell’s metabolism.

Ca3(PO4)2 + 3H2SO4  3CaSO4 + 2H3PO4.
What mass of concentrated H2SO4 (98% by mass) must be used to react completely
with 100.00 g of calcium phosphate?

Answers

If anything isn’t obvious, don’t hesitate to ask me
Check the attached photo out...

100g  

H2SO4 = 3x98x100/310 = 94.84g

used mass of h2so4x100/all mass of H2so4 = 98%

yx100/98=94.84x100/98 = 96.81.

Check the attached photo for clear answer.

What is the use of calcium phosphate?

It may be used to treat conditions caused by low calcium levels such as bone loss (osteoporosis), weak bones (osteomalacia/rickets), decreased activity of the parathyroid gland (hypoparathyroidism), and certain muscle diseases (latent tetany).

Is calcium phosphate good for health?

About Calcium Phosphate Supplements

It aids in healthy bone development and is crucial from infancy to adulthood. But, calcium does more than build strong bones. It's also very important for healthy digestion. Calcium aids in bile acid metabolism, excretion of fatty acids, and healthy gut microbiota.

Learn more about calcium phosphate at

https://brainly.com/question/10835189

#SPJ2


A characteristic used to describe something is called a

Answers

trait-descriptive adjectives.



adjectives that can be used to describe characteristics of people are called.
character trait i think

Please if you just want point TELL ME I can’t fail this.

Match the environmental stresses to what would happen in the chemical reaction. Think through the path from the carbon cycle - how CO2
CO2is removed from the atmosphere and stored in sinks and then how CO2
CO2is released from sinks and/or produced. Loss of carbon sinks, like trees

Decrease in shellfish due to overfishing

Decrease the number of farms

Increase in Earth's temperature

Decrease in number of cars burning gas

Answers

Answer:

here you go. I took the test :)

Explanation:

pleaaaaase helppppppppppppp ASAP

Answers

Answer:

Explanation:

a) The forward reaction is exothermic, hence when temperature is increased the equilibrium shift towards the reactants side to get rid of the excess energy. This will mean that more reactants are produced decreasing yield

b) There are a fewer number of moles of gas on the right side compared to the left side (Just count the coefficients before each compound) so a higher pressure will mean that the equilibrium will shift towards the products side in order to decrease the pressure. This will mean that more products are formed increasing yield

c) When something is powdered it's surface area to volume ratio increases. A higher surface area means that the particles around it have more area to work on so the frequency of collisions will increase increasing the rate of reaction. This is why iron is powdered.

What are the two products of an acid base neutralization reaction?

Answers

Answer:

Neutralization reactions occur when two reactants, an acid and a base, combine to form the products salt and water.

Explanation:

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: Water and NaCl is always formed

Explanation:

I hope this helped!

<!> Brainliest is appreciated! <!>

- Zack Slocum

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Other Questions
Consider the following example. Maxine comes from a working-class background. Her father worked in construction his whole life and her mother was a stay-at-home mom who dropped out of high school but later got her GED. Maxine becomes interested in computer programming at a young age and spends many hours in the school library teaching herself. Maxine attends the state university on a scholarship. While there, she develops a valuable algorithm for identifying neurological diseases that makes her a multi-millionaire. She drops out of college to continue her work. Which term related to social class best describes this scenario Which of these best describes fossils?A. nonexistentB. easily formedC. important and rareD. common and unhelpful what is the domain of the function? (f)x=3(2)^x for x=-1 What am I supposed to do in this assignment Jamie is ________ a master baker, ________ a master chef.Choose the correct pair of correlative conjunctions to complete the sentence. A. whether, orB. neither, norC. either, orD. not only, but also Find the momentum of a 15 kg object traveling at 7 m/sWhat is the momentumWhat is the velocityWhat is the massWhat equation did you use to solve? What can you use to find how many centimeters are in 0.24 meters Which of these is the BEST explanation for the high population density in China's eastern regions? A. The region does not have a favorable climate. B. The region was traditionally home to the emperor and the gods. C. The region was destroyed by civil war which caused people to leave. D. The region is capable of large scale commercial farming and is close to the ocean. South Africa's system of separating the races was called __________? Find the value of x to the nearest tenth! HELP ME!!!!!!!!!!!!! (PICTURE IS BELOW) Please answer this question:1.) [tex] {3}^{n + 2} + \: ({3}^{n + 3} - \: {3}^{n + 1})[/tex]2.) [tex] \frac{( {25}^{ - 1} + ( {25}^{ - 2})}{( {625}^{0} + ( {25}^{ - 2} )}[/tex]hope you can help me. thank you in advance. I'll give the brainliest. Evaluate the following:81 Identify each number that is greater than 2 5/7A: 300%B:2.58C: 19/7D: 5.6 Please help with this question 3. How large was the Ming Dynasty compared to the Mongols? What issues might arise from this difference? pls help immediately!!!! Select all expressions that are greater than 4.ANSWERS1.67+ 3.4562.97+ 1.06784.12 - 0.055.503 - 1.52 Let3.agesThe sum of the ages of Roshan and Ravi is 55 years and the ratio of theiris 5:6. Find their ages. Characteristics nucleus cell wall Kingdom A absent (prokaryote) present autotrophs or heterotrophs Kingdom B present (eukaryote) absent mode of nutrition heterotrophs cellular organization unicellular multicellular Which student scenario correctly matches the Kingdoms based on the characteristics given in the chart? O A. Student 1 believes Kingdom A ilmbacteria because it is unicellular and prokaryotic. Student 2 believes that kingdom B is plant because it is missing a cell wall and is multicellular. O B. Student 1 believes Kingdom A is fungi because it is autotrophic and unicellular. Student 2 believes that kingdom B is animal because it is eukaryotic and heterotrophic. C. Student 1 believes Kingdom A is animal because it is prokaryotic and unicellular. Student 2 believes that kingdom B is bacteria because it is unicellular and prokaryotic. O D. Student 1 believes Kingdom A is bacteria because it is unicellular and prokaryotic. Student 2 believes that Kingdom B is animal because it is eukaryotic and heterotrophic.