(a) Kp = 57.2. (b) Equilibrium favors products as Kp > Qp. Forward reaction is favored.
(a) The value of Kp at 450 K can be calculated using the equilibrium expression:
Kp = (PPCl5) / (PPCl3 x PCl2)
Substituting the given equilibrium pressures into this expression, we get:
Kp = (1.14 atm) / (0.122 atm x 0.140 atm) = 57.2
Therefore, the value of Kp at 450 K is 57.2.
(b) To determine whether the equilibrium favors reactants or products, we can compare the calculated value of Kp to the reaction quotient, Qp.
Qp can be calculated in the same way as Kp, using the current partial pressures of the gases at equilibrium. Substituting the given equilibrium pressures, we get:
Qp = (PPCl5) / (PPCl3 x PCl2) = (1.14 atm) / (0.122 atm x 0.140 atm) = 9.23
Since Kp > Qp, the equilibrium favors products. This means that at the given temperature, the forward reaction (formation of PCl5) is favored over the reverse reaction (breakdown of PCl5 into PCl3 and Cl2), and the system has reached a state where the concentrations of products are higher than the concentrations of reactants.
Learn more about partial pressures :
https://brainly.com/question/13199169
#SPJ4
The complete question is :
Phosphorus trichloride gas and chlorine gas react to form phosphorus pentachloride gas. PCl3(g) + Cl2(g) PCl5(g). A gas vessel is charged with a mixture of PCl3(g) and Cl2(g), which is allowed to equilibriate at 450 K. At equilibrium the partial pressures of the three gases are PPCl3 = 0.122 atm, PCl2 = 0.140 atm, and PPCl5 = 1.14 atm.
(a) What is the value of Kp at this temperature?
(b) Does the equilibrium favor reactants or products?
The equilibrium favors products. The equilibrium favors reactants. Neither reactants nor products are favored.
How many grams of HCI are needed to prepare .40 L of 1.5 M solution?
Answer: 21.90 grams HCl ; 22 g HCl if need correct sig figs
Explanation:
moles = M X L = 1.5 x .40 =0.60 moles HCl
convert to grams
0.60 X 36.5 = 21.90
NH3 is a stronger base than H20. Goal: Explain this observation using molecular orbitals. 1. Draw the molecular orbital diagrams for NH3 and H20 on the same energy scale. Appropriately label each MO with its type (0, 0*, nb, a, 1*) as well as with the atom(s) whose orbitals led to that MO.
The Establishment of the Molecular Orbitals of NH3. A molecule's electrical structure can be predicted using the Molecular Orbital Theory (MO).
What is meant by Molecular Orbital Theory?Simply put, according to the molecular orbital hypothesis, atoms tend to group together to create molecular orbitals. As a result of this arrangement, electrons can be found in a variety of atomic orbitals and are typically connected to numerous nuclei. In order to create the molecular orbital, the atomic orbitals combine. Similar to how the energy states of atomic orbitals are filled, the electrons of molecules fill the new molecular orbitals' energy levels.The work of Friedrich Hund, Robert Mulliken, John C. Slater, and John Lennard-Jones was crucial in the development of molecular orbital theory in the years after the establishment of valence bond theory (1927). The Hund-Mulliken theory was what MO theory was first known as.To learn more about Molecular Orbital Theory, refer to:
https://brainly.com/question/26388921
#SPJ4
Calculate the atomic mass of silver if silver has 2 naturally occurring isotopes with the following masses and natural abundances: Ag-107 106.90509 amu 51.84% Ag-109 108.90476 amu 48.46%
The atomic mass of the silver if silver has 2 naturally occurring isotopes with masses and natural abundance is Ag-107 106.90509 amu 51.84% Ag-109 108.90476 amu 48.46% is 108.19 amu.
The atomic mass of the silver , Ag - 107 = 106.90509 amu
The natural abundance = 51.84 % = 0.5184
The atomic mass of the silver , Ag - 109 = 108.90476 amu
The natural abundance = 48.46 % = 0.4846
The atomic mass = mass of isotopes × natural abundance + mass of isotopes × natural abundance
The atomic mass = 0.5184 × 106.90509 + 0.4846 × 108.90476
The atomic mass = 108.19 amu
To learn more about atomic mass here
https://brainly.com/question/14664137
#SPJ4
which of the following pieces of information do you need to calculate the molecular mass of a compound? select all that apply. multiple select question. the atomic mass of each element contained in the compound the mass of a sample of the compound the physical properties of the compound the formula of the compound
To calculate the molecular mass of a compound, you need:
The atomic weight of each component of the compound.
Therefore, you need to select the following:
The atomic weight of each component of the compound
You do not need the mass of a sample of the compound or the physical properties of the compound to calculate its molecular mass. The molecular mass of a compound is the sum of the atomic masses of all the atoms in a molecule of that compound. It is also known as the molecular weight of the compound.
Learn more about molecular mass of a compound here:
https://brainly.com/question/3182776
#SPJ4
Answer: The formula of the compound
The atomic masses of each of the elements that make up the compound
Explanation:
A 1.0 mol sample of CO(g) and a 1.0 mol sample of H2(g) are pumped into a rigid, previously evacuated 2.0 L reaction vessel at 483 K. Which of the following is true at equilibrium?a. [H2] = 2 [CO]b. [H2] < [CO]c. [CO] = [CH3OH] < [H2]d. [CO] = [CH3OH] = [H2]
The expression which is true regarding the equilibrium of the reaction is
[CO] = [H₂] = [CH₃OH]. Hence, option d is correct.
What is equilibrium condition ?A reaction is said to at equilibrium when the rate of forward reaction and backward reaction are the same. The number of reacting species in the reactant side must be equal to the number of reacting species in the product side.
Here, the reaction of carbon monoxide and hydrogen gas to give methanol is given below:
[tex]\rm CO + 2H_{2} \rightarrow CH_{3}OH[/tex]
At, equilibrium, the concentration of all the reactants and products will be the same.
Therefore,
[CO] = [H₂] = [CH₃OH]
Hence, option d is correct.
Find more on equilibrium:
https://brainly.com/question/30693676
#SPJ1
When using PCR to study DNA, primers attach to the exposed base pairs and begin to form double-stranded DNA. What stage of the process does this MOST accurately describe
The stage that this most accurately describes while using the PCR is the initiation of DNA synthesis, also known as the denaturation stage.
What occurs in the denaturation stage?In the denaturation stage of Polymerase Chain Reaction (PCR), the double-stranded DNA template is heated to a high temperature to separate the two complementary strands and create single-stranded DNA. The denaturation stage is the first step in the PCR cycle.
In this stage, the heat-stable DNA polymerase denatures the DNA and the primers anneal to the complementary single-stranded template. This marks the beginning of the extension stage, where the DNA polymerase synthesizes new complementary strands along the template DNA.
Learn more on denaturation stage here: https://brainly.com/question/27493294
#SPJ1
Question 3 of 10
Calcium metal (Ca) and chlorine gas (Cl₂) undergo a
chemical reaction to form calcium chloride (CaCl₂).
Which equation represents this chemical reaction?
OA. Cl₂ - Ca + CaCl₂
OB. CaCl₂ + Cl₂ → Ca
OC. Ca + Cl₂ CaCl₂
D. Ca - CaCl2 + Cl₂
← PREVIOUS
Ca + Cl₂ ⇒ CaCl₂ equation represents this chemical reaction. Therefore, option C is correct.
What is chemical reaction ?The term chemical reaction is defined as a process that alters one or more substances, called as reactants, to one or more various substances, called as products.
Chemical changes occur when bonds are broken and produce between molecules or atoms.That means that one substance with a certain set of properties is convert into a different substance with different properties.
The reaction of Calcium metal (Ca) and chlorine gas (Cl₂) react with each other to form calcium chloride (CaCl₂) is Ca + Cl₂ ⇒ CaCl₂ .
Thus, option C is correct.
To learn more about the chemical reaction, follow the link;
https://brainly.com/question/22817140
#SPJ9
Which one would be expected to have the lowest solubility in water?
A. CsI
B. KCl
C. NaBr
D. BaSO4
E. RbOH
Among the options provided, the compound that would be expected to have the lowest solubility in water is (D.) BaSO4 (barium sulfate)
What does solubility of solubility of a compound in water depends on?The solubility of a compound in water depends on its ability to interact with water molecules. Compounds that can form strong interactions with water, such as through hydrogen bonding, tend to be more soluble in water. On the other hand, compounds that cannot form strong interactions with water tend to be less soluble.
BaSO₄ (barium sulfate) have the lowest solubility in water. This is because BaSO₄ is a salt of a strong base (Ba (OH)₂) and a weak acid (H2SO₄), which makes it a weak electrolyte. As a result, it does not dissociate easily in water, and its ions do not interact strongly with water molecules. Additionally, BaSO₄ is an ionic compound with a large lattice energy, which further reduces its solubility in water.
In contrast, CsI, KCl, and NaBr are all ionic compounds that can easily dissociate in water, forming ions that can interact with water molecules through ion-dipole interactions. RbOH is a polar covalent compound that can form hydrogen bonds with water molecules, which also makes it relatively more soluble in water.
To know more about hydrogen bonds, visit:
https://brainly.com/question/10904296
#SPJ1
Researchers wanted to explore what psychological and social impact time spent watching TV and playing electronic games might have on children between the ages of five and seven. They included a representative sample of just over 11,000 children. When they were five and then again when they were seven, the children's mothers were asked to describe how well adjusted their offspring were, using a validated Strengths and Difficulties (SDQ) questionnaire. This experimental design best matches which category? A. Clinical Trial B. Population Survey C. Case-Control Study D. Cohort Study
The kind of study is a cohort study.
What is a Cohort study?A cohort study is a type of observational study in which a group of individuals (the cohort) with a common characteristic or experience are followed over a period of time to investigate the development of a particular health outcome or disease.
Cohort studies can be prospective (following the cohort from the present into the future) or retrospective (looking back in time to study past exposures and outcomes). They can be used to examine the incidence, prevalence, and risk factors of diseases, and are particularly useful for investigating rare exposures or outcomes.
Learn more about Cohort study:https://brainly.com/question/9429879
#SPJ1
electromagnetic radiation consists of particles called , which are characterized by a specific wavelength and .
Electromagnetic radiation consists of particle called photons, each of which has a discrete amount, or quantum, of energy, however, since electromagnetic radiation also has wave properties, each particle is also characterized by a specific wavelength and frequency.
Electromagnetic radiation is a type of energy that travels through space in the form of waves. This radiation is composed of massless particles called photons, which are the fundamental unit of electromagnetic radiation.
Each photon has a discrete amount of energy, which is directly proportional to the frequency of the wave it represents. This relationship is given by the equation E = hf, where E is the distance between two consecutive peaks or troughs of the wave. The frequency of a wave is the number of cycles it completes in a unit of time.
Complete questions:
Electromagnetic radiation consists of particle called ____ each of which has a discrete amount, or quantum, of energy, however, since electromagnetic radiation also has wave properties, each particle is also characterized by a specific wavelength and ____.
Learn more about Electromagnetic radiation:
https://brainly.com/question/1408043
#SPJ4
which of the following will have the largest difference between the experimental and ideal van 't hoff factors? group of answer choices A.RbCl. B.Rbi. C.RbBr. D.RbF
RbF is expected to have the largest difference between the experimental and ideal Van 't Hoff factors. Because RbF has a very high lattice energy due to the small size of the F- ion, making it more difficult for the ions to dissociate in water. Option D is correct.
The Van 't Hoff factor (i) is a measure of the number of particles into which a solute dissociates in a solution. The ideal Van 't Hoff factor (i) is the value expected for a completely dissociated solute, while the experimental Van 't Hoff factor (i) is the value determined by experiments.
For ionic compounds that dissociate in water, the experimental Van 't Hoff factor is often less than the ideal value due to ion pairing or other interactions that reduce the effective number of ions in solution.
The size of the difference between the experimental and ideal Van 't Hoff factors depends on the degree of ion pairing or other interactions in solution. The degree of ion pairing or other interactions in solution is influenced by factors such as the size and charge of the ions, as well as the solvent.
To know more about Van 't Hoff factors here
https://brainly.com/question/1748231
#SPJ4
1) Ethanol was found in wine and beer. consider the physical properties of ethanol shown in the table determine the states of matter presented at each temperature listed.
Melting Point is -114 Degrees Celsius
Boiling point is 78 Degrees Celsius
A.) State(s) of matter present at _______
B.) State(s) of matter present at _______
C.) State(s) of matter present at _______
D.) State(s) of matter present at _______
2) In which of the temperatures listed the question above, -120 Degrees Celsius, 0 Degrees Celsius, 78 Degrees Celsius, and 100 Degrees Celsius, at which temperature would the ethanol molecules be moving the fastest and why?
3) Suppose that 25.0g sample of copper increased in temperature from 25.0 Degrees Celsius to 100.0 Degrees Celsius. Describe the quantities that would be needed to determine the about of heat exchange. Is the heat absorbed or related by the copper?
4) Suppose that a given mass of water vapor at 100 Degrees Celsius condenses to liquid water at 100 Degrees Celsius. Describe the quantities that would be needed to determine the about of heat exchange. Is the heat absorbed or released by the water?
5) Suppose a given mass of water initially at 37 Degrees Celsius (body temperature) absorbs enough heat energy to vaporize to gas at 100 Degrees Celsius. Describe the quantities that would be needed to determine the about of heat exchanged?
Answer:
1) A.) State(s) of matter present at -120 Degrees Celsius: Solid
B.) State(s) of matter present at 0 Degrees Celsius: Solid and liquid
C.) State(s) of matter present at 78 Degrees Celsius: Liquid and vapor
D.) State(s) of matter present at 100 Degrees Celsius: Vapor
2) At 100 Degrees Celsius, the ethanol molecules will be moving the fastest because this is the temperature at which the boiling point of ethanol occurs, and this is the temperature at which all molecules in the liquid have enough kinetic energy to escape as a gas.
3) To determine the amount of heat exchange of the copper, one needs to know the mass of the sample, the temperature change (25.0 Degrees Celsius to 100.0 Degrees Celsius), and the specific heat capacity of copper. The heat will be absorbed by the copper.
4) To determine the amount of heat exchange of the water, one needs to know the mass of the sample, the temperature change (100 Degrees Celsius to 100 Degrees Celsius), and the specific heat capacity of water. The heat will be released by the water.
5) To determine the amount of heat exchanged, one needs to know the mass of the sample, the temperature change (37 Degrees Celsius to 100 Degrees Celsius), and the specific heat capacity of water. The heat will be absorbed by the water.
HCI is covalent yet it conducts electricity. Given the amount of its electronegativity difference as well as considering shielding in hydrogen, can you explain what might happen when it is dissolved in water (even though it is covalent)? ALSO, comment on any difference in conductivity between HCI and acetic acid. Do you have an idea of why the two have any difference?
Answer:
Hydrogen chloride (HCl) is a covalent compound, meaning it shares electrons between atoms to form a bond. However, when HCl is dissolved in water, it dissociates into H+ and Cl- ions through a process called ionization. This ionization occurs because water is a polar solvent, meaning it has a partial positive charge on one end and a partial negative charge on the other end. The positive end of water molecules attracts the negatively charged Cl- ion, while the negative end of water molecules attracts the positively charged H+ ion, causing HCl to dissociate.
The ionization of HCl in water allows it to conduct electricity because the H+ and Cl- ions are free to move and carry electrical charge. This is why HCl is considered an electrolyte when dissolved in water, despite being covalent in its pure form.
In contrast, acetic acid (CH3COOH) is also a covalent compound that can ionize in water to some extent. However, it does not fully dissociate into ions like HCl does, meaning its conductivity in water is lower than that of HCl.
The difference in conductivity between HCl and acetic acid can be explained by their respective acid strengths. HCl is a strong acid, meaning it readily donates its H+ ion in water, while acetic acid is a weak acid, meaning it only partially dissociates in water. The more ions that are present in a solution, the higher its conductivity, so the stronger acid (HCl) has higher conductivity than the weaker acid (acetic acid).
if red spheres represent oxygen atoms, blue spheres represent nitrogen atoms, and all the molecules are gases, (figure 1) figure1 of 1 there is a scheme of a chemical reaction. the reactants are two molecules that consist of two red atoms and four molecules that consist of one red and one blue atoms. the products are four molecules that consist of two red atoms and one blue atom. part a part complete write the formula for each of the reactants. express your answers as chemical formulas separated by a comma. no,o2 previous answers correct part b part complete write the formula for each of the products. express your answer as a chemical formula. no2 previous answers correct part c write a balanced equation for the reaction.
a) Reactants = 2NO, O₂ Products = 2NO₂ b) The balanced chemical equation is, 2NO + O₂ ---> 2NO₂. c) It is a combination reaction.
The Reactants in the reaction are 2NO, O₂ and products in the reaction is 2NO₂. The reaction is a combination reaction. Combination reactions can be exothermic or endothermic, depending on the specific reaction. Exothermic combination reactions release energy, usually in the form of heat or light, while endothermic combination reactions absorb energy.
The balanced chemical equation is, 2NO + O₂ ---> 2NO₂.
If we see the reaction 2NO + O₂ ---> 2NO₂ then we see that two molecules react and formed a single combined compound.
So it is combination reaction.
To know more about the combination reaction, here
brainly.com/question/3664113
#SPJ4
When two substances with the same mass are heated by the same amount, which pair would heat up at about the same rate? Use the table to identify the substances.
A. aluminum and gold
B. copper and iron
C. iron and aluminum
D. gold and copper
Answer:
D. Gold and copper
From the table, the two metals which heat up about the same rate are iron and copper. These two metals have about close specific heat of capacities. Thus, they will cool or heat up in closer rates.
What is specific heat capacity ?Specific heat of capacity of a substance is the heat energy required to raise the temperature by one degree Celsius per one gram. It is an intensive quantity and does not depends on the amount of the substance.
The specific heat of the substance indicates the rate at which the substance cools down or heats up. It depends on the nature of the substance and its bond type.
Here, the two metals having closer specific heat capacities are iron and copper. Copper has specific heat of 0.39 and iron has 0.46 J/g° C. Hence, they will heats up in about same rates. Therefore, option C is correct.
Find more on specific heat:
https://brainly.com/question/11297584
#SPJ2
Choose the most appropriate reagent(s) for the conversion of the secondary alcohol intermediate to acetophenone. Br BrMg Bra, FeBr 3 Mg diethyl ether 1. CH3CHO 2. H2O* workup OH reagent(s) A 1.03 2. CHZSCH B 1. BH 2. H2O, NaOH Na2Cr207, H2SO4, H2O H2SO4, H2O E CH3CO3H
The most appropriate reagent(s) for the conversion of the secondary alcohol intermediate to acetophenone are Na2Cr2O7, H2SO4, and H2O.
This is because these reagents are commonly used in the oxidation of secondary alcohols to ketones.
The reaction can be represented as follows:
Secondary alcohol intermediate + Na2Cr2O7 + H2SO4 + H2O → Acetophenone + other products
In this reaction, the secondary alcohol intermediate is oxidized to acetophenone by the reagent Na2Cr2O7 in the presence of H2SO4 and H2O.
The H2SO4 acts as an acid catalyst, while the H2O provides the necessary hydration for the reaction to occur.
Overall, the most appropriate reagent(s) for the conversion of the secondary alcohol intermediate to acetophenone are Na2Cr2O7, H2SO4, and H2O.
To know more about reagents, refer here:
https://brainly.com/question/29588114#
#SPJ11
how many cubic meters of soil are needed to fill a flower box thats is 5.40 feet long, 9.52 inches wide and 0.9 yards deep
46.27 cubic feet soil are needed to fill the flower box
Computation of Volume of a boxGiven Data
Length of Box = 5.40 feet
Width of Box = 9.52 feet
Depth of Box = 0.9 feet
Let us find the volume of the box
The volume can be found be using the expression below
Volume = L*W*D
Substitute the given data into the expression we have
Volume = 5.40*9.52*0.9
Volume = 46.27 cubic feet
Learn more about Volume here:
https://brainly.com/question/21092361
#SPJ1
The molecules of substance A exhibit stronger intermolecular forces than the molecules of substance B. Which of the following statements are true? (Select all that apply.)
A. The boiling point of substance A is higher than the boiling point of substance B.
B. The heat of vaporization of substance A is higher than the heat of vaporization of substance B.
C. Substance A contains hydrogen bonds.
D. The vapor pressure of substance A is higher than the vapor pressure of substance B.
It is true that substance A has hydrogen bonds and that substance A has a higher boiling point than substance B. Moreover, substance A has a larger heat of vaporization than substance B.
The strongest intermolecular forces can be seen in which of the following molecules?In particular, the hydrogen-bonding subgroup of dipole-dipole interactions, which occurs when a hydrogen is in close proximity to (connected to) a strongly electronegative element strongest intermolecular force (namely oxygen, nitrogen, or fluorine).
What transpires when a molecule's intermolecular forces are stronger?As a general rule, more energy is needed to overcome intermolecular forces of attraction that are greater. Ionic and polar covalent molecules thus have higher Compared to covalent compounds, these substances have greater melting and boiling temperatures as well as enthalpies of fusion and vaporization.
To know more about hydrogen bonds visit:-
https://brainly.com/question/17659933
#SPJ1
A protein-ligand binding reaction is run. At equilibrium, half the protein is ligand bound, the unbound ligand concentration is 0.657 nM. Calculate the koff value for this reaction. Assume the kon value is typical of protein-ligand interactions.
The koff value for this reaction is 1.314 s-1
The concentration of bound and unbound ligands can be connected to the dissociation constant (Kd) of the protein-ligand complex using the equilibrium equation shown below:
Kd = (P)(L)/(PL)
Since we know that half of the protein is ligand-bound at equilibrium, [PL] = [P]/2. Moreover, we are aware that [L] = 0.657 nM.
Using these values as a substitute in the equilibrium equation, we obtain:
Kd = [P][L]/[PL] = [P](0.657 nM)/(0.5[P]), which equals 1.314 nM.
The following equation can also be used to link the association (kon) and dissociation (koff) rate constants to the dissociation constant (Kd):
Koff/Kon = Kd
When we solve for koff, we get:
1.314 nM * kon = koff = Kd * kon
We can use a value of 106 M-1s-1 for kon as we are presuming that the kon value is common for protein-ligand interactions. If we substitute this value, we obtain:
koff is equal to 1.314 nM x 106 M-1 s-1 / 1.314 s-1.
therefore, 1.314 s-1 is the koff value for this protein-ligand binding process.
learn more about the dissociation constant
brainly.com/question/28197409
#SPJ4
When balanced with smallest set of whole numbers, the coefficient of O2 in the following equation is
__ C3H5OH+ __ O2 --> __ CO2 + __ H2O
the coefficient of O2 in the following equation is 3, 6, 3, 6
What is coefficient?In chemistry, a coefficient is a number that is placed in front of a chemical formula when writing a chemical equation. It indicates the number of molecules or moles of a particular substance that is present in the reaction. For example, if the coefficient for oxygen is two, then two molecules of oxygen are present for every one molecule of the reactant. Coefficients are used to balance chemical equations and can often be used to determine the amount of products produced in a reaction. For example, if two molecules of hydrogen react with two molecules of oxygen to form one molecule of water, then the coefficients in the equation would be 2H2 + 2O2 --> 2H2O.
Therefore, the coefficient of O2 in the following equation is 3, 6, 3, 6
To learn more about coefficient visit
brainly.com/question/19727079
#SPJ4
after adding ethlyene glycol to the dissolved 3-nitrophthalic acid in step 1, what is the desired temperature for the reaction?
After adding ethlyene glycol to the dissolved 3-nitrophthalic acid the desired temperature for the reaction stays in room temperature.
Ethylene glycol, also defined as ethane-1,2-diol, the simplest member of the glycol family of organic compounds. Generally a glycol is defined as an alcohol with two hydroxyl groups on adjacent carbon atoms (a 1,2-diol). Basically, the common name ethylene glycol literally means “the glycol derived from ethylene.”
Generally, 3-Nitrophthalic acid is readily used as an intermediate during the synthesis of corrosion inhibitors, medicines and agrochemicals. 3-Nitrophthalic acid is readily available for the preparation of dyes, crop protection agents used during organic synthesis.
During the reactions of both of these chemicals the temperature remains at room temperature.
Learn more about 3-Nitrophthalic acid from the link given below.
https://brainly.com/question/20716309
#SPJ4
Calculate the molar mass of the following equations.
The molar mass of a compound can be calculated from the number of atoms present in the compound and the atomic masses of elements. The molar mass of KOH is 56 g/mol.
What is molar mass ?The molar mass of a compound is the mass of one mole of the compound. One mole of a compound contains 6.02 × 10²³ molecules. This number is called Avogadro number.
The molar mass of a compound is the sum of masses of its atoms.
The atomic mass of Cl = 35.5 g/mol
Atomic mass of K = 39 g/mol
atomic mass of H = 1 g/mol and mass O = 16 g/mol.
Hence, molar mass of KOH = 1 + 39 + 16 = 56 g/mol
Mass of Be = 9 g/mol
mass of Cl = 35.5 g/mol
then molar mass of BeCl₂ = (35.5 × 2) + 9 =80 g/mol
Mass of Fe = 55.8 g/mol
molar mass of FeCl₃ = (35.5 × 3) + 55.8 = 162.3 g/mol.
Mass of B = 11 g/mol
mass of F = 19 g/mol
then, molar mass of BF₃ = 11 + (19 × 3) = 68 g/mol
In a similar way, the molar mass of all the given compounds can be determined using atomic masses of constituent elements.
Find more on molar mass:
brainly.com/question/12127540
#SPJ1
mono addition of hbr to conjugated dienes leads to multiple products, and a given addition product can arise from more than one conjugated diene. two allylic bromide products can be synthesized from a diene. from the list given, identify the pair of dienes wherein each diene can serve as a precursor for both of the addition products. note that not all possible products are shown. a diene reacts with h b r to form two monoaddition products. product 1 is a 6 carbon chain with a double bond between carbons 2 and 3, an ethyl substituent on carbon 4 and a bromine on carbon 4. product 2 is a 6 carbon chain with an alkene between carbons 3 and 4, a bromine substituent on carbon 2 and an ethyl substituent on carbon 4. identify the diene precursors.
The conjugated diene creates a mixture of two products the kinetic product and the thermodynamic product upon electrophilic addition; the ratio of these two products is governed by the reaction's circumstances.
What is bromide product?"When life delivers you lemons, make lemonade," is an example of a common proverb or saying that is obvious and not all that helpful. Follow your aspirations and "Love requires hard effort" are two common phrases that some people love to use. Such hackneyed, overused phrases are bromides.A type of drug called bromide is used to treat severe epilepsy, which is known to cause myoclonic seizures in particular.In fresh water, bromide concentrations typically vary from trace levels to 0.5 mg/l. Bromide concentrations in desalinated water can get close to 1 mg/l.Rapid inhalation Upper respiratory symptoms, a cough, a headache, affects on the central nervous system (CNS), and lacrimation may result from exposure to bromine vapour. The CNS is affected by acute oral bromine exposure. Acute cutaneous exposure to bromine has been linked to deep partial skin loss and skin discoloration.To learn more about bromide product, refer to:
https://brainly.com/question/28997330
#SPJ4
which of the following statements are inconsistent with dalton's atomic theory as it was originally stated? check all that apply. A. the formation of a compound often involves the destruction of one or more atoms. B. all carbon atoms are identical. C. two oxygen atoms combine with a carbon atom to form a carbon dioxide molecule.
D. a phosphorus atom combines with 2.5 hydrogen atoms to form a phosphine molecule.
The Correct answer is
The statement A is inconsistent with Dalton's atomic theory as it was originally stated.
What is Dalton Atomic Theory?
Dalton's atomic theory is a scientific theory that was proposed by the English chemist John Dalton in the early 19th century. The theory provides a framework for understanding the behavior and properties of matter at the atomic level, and it is considered one of the foundational theories of modern chemistry.
Dalton's atomic theory is based on a number of postulates, including:
All matter is composed of tiny, indivisible particles called atoms.
Atoms of the same element are identical in mass and properties, but they differ from atoms of other elements.
Chemical reactions involve the rearrangement of atoms, but the atoms themselves are not created or destroyed.
Dalton's atomic theory includes the postulate that atoms are indivisible and cannot be created or destroyed in chemical reactions. Thus, the formation of a compound cannot involve the destruction of atoms.
Statements B, C, and D are consistent with Dalton's atomic theory. Statement B asserts that all atoms of the same element are identical, which is one of the postulates of Dalton's theory. Statement C describes a chemical reaction in which atoms combine to form a molecule, which is also consistent with Dalton's theory. Finally, statement D describes a chemical reaction involving atoms combining in fixed, whole-number ratios, which is another postulate of Dalton's theory. However, it is worth noting that the idea of 0.5 hydrogen atoms in a molecule is not consistent with the idea of indivisible atoms, which is a fundamental principle of Dalton's atomic theory.
Learn more about Dalton Atomic Theory from given link
https://brainly.com/question/13157325
#SPJ4
alculate the frequency of the photon released for an ionized helium atom (it has a single electron) when the electron transitions from second orbit to first orbit.
The frequency of photon released for an ionized helium atom during transition from second to the first orbit is 9.89 x 10^15 Hz.
The energy of a photon is given by Rydberg formula,
[tex]\dfrac{1}{\lambda} = R [\[\dfrac{1}{n_1^2} - \dfrac{1}{n_2^2}\]][/tex]
where λ is wavelength, R is the Rydberg constant, n1, n2 are the initial and final quantum numbers.
For a transition from the second to first orbit, n1 = 2 and n2 = 1.
Using Rydberg formula,
[tex]\dfrac{1}{\lambda} = 1.0974 \times 10^7 [\[\dfrac{1}{2^2} - \dfrac{1}{1^2}\]][/tex]
Solving for λ,
λ = (4/3R) = 30.37 nm
The frequency of the photon,
ν = c/λ
where c is the speed of light and ν is the frequency.
Frequency = ν = c/λ
= (3.00 x 10^8 m/s) / (30.37 x 10^-9 m)
= 9.89 x 10^15 Hz
To know more about the photons, here
brainly.com/question/13436020
#SPJ4
--The complete question is, Calculate the frequency of the photon released for an ionized helium atom (it has a single electron) when the electron transitions from second orbit to first orbit.--
consider two large parallel metallic plates with uniform, opposite charge distributions, as in fig. 24.49a. suppose that the magnitude of the charge density on each plate is 2.0 105 c/m2 . the upper plate is positive and the lower negative. (a) what is the magnitude of the electric field in the region between the plates? (b) you now insert a neutral large parallel metallic plate in the space between the two charged plates, as in fig. 24.49b. suppose that this plate is 1.0 cm thick. what is the magnitude of the electric field inside this thick plate? what is the magnitude of the electric field in the remaining space above and below this thick plate? (c) what is the charge density on the upper surface of the thick plate? the lower surface?
a) Electric field is, 2.26 × 10⁷ N/C b) After inserting the metallic plate electric field remains the same, E = 2.26 × 10⁷ N/C. (c) The charge density on the upper surface is 2.0 × 10⁵ C/m², lower surface of the thick plate is zero.
The electric field between the plates can be found using the formula E = σ/ε₀, where σ is the charge density on each plate and ε₀ is the permittivity of free space.
E = σ/ε₀ = (2.0 × 10⁵ C/m²) / (8.85 × 10⁻¹² F/m) ≈ 2.26 × 10⁷ N/C
When the neutral plate is inserted, the electric field inside the plate is zero because the charges in the plate rearrange themselves in response to the electric field from the other two plates, resulting in a net electric field of zero inside the plate.
E = σ/ε₀ = (2.0 × 10⁵ C/m²) / (8.85 × 10⁻¹² F/m) ≈ 2.26 × 10⁷ N/C
The charge density on the upper surface of the thick plate is also 2.0 × 10⁵ C/m². The charge density on the lower surface of the thick plate is zero, since it is in contact with the neutral plate and no charges can flow through it.
To know more about the electric field, here
brainly.com/question/15800304
#SPJ4
--The complete question is, Consider two large parallel metallic plates with uniform, opposite charge distributions. Suppose that the magnitude of the charge density on each plate is 2.0 × 10¬5 C/m². The upper plate is positive and the lower negative.
(a) What is the magnitude of the electric field in the region between the plates?
(b) You now insert a neutral large parallel metallic plate in the space between the two charged plates. Suppose that this plate is 1.0 cm thick. What is the magnitude of the electric field inside this thick plate? What is the magnitude of the electric field in the remaining space above and below this thick plate?
(c) What is the charge density on the upper surface of the thick plate? The lower surface?--
select all that apply. a radioactive isotope, such as carbon-14, emits energy as which of the following?
A radioactive isotope, such as carbon-14, emits energy as rays and subatomic particles.
About Radioactive isotopeRadioactive isotopes, also known as radioisotopes, radionuclides, or radioactive nuclides, are any of several species of the same chemical element with different masses and unstable nuclei that work to dissipate excess energy by spontaneously emitting radiation in alpha, beta, and gamma forms .
More than 1,800 radioactive isotopes of various elements are known. Some of them are found in nature; the rest are produced artificially as direct products of nuclear reactions or indirectly as radioactive derivatives of these products.
Radioisotope ProductionThere are several sources of radioactive isotopes. Some radioactive isotopes are present as terrestrial radiation. The radioactive isotopes radium, thorium, and uranium, for example, are found naturally in rocks and soil. Uranium and thorium also occur in small amounts in water. Radon, which is produced by the radioactive decay of radium, is abundant in the air.
Other radioactive isotopes are produced by humans in nuclear reactions, which produce unstable combinations of neutrons and protons. One way to artificially induce nuclear transmutation is by bombarding stable isotopes with alpha particles.
Your question is incomplete but most probably your full question was:
Select all that apply. A radioactive isotope (ex. carbon 14) emits energy as which of the
following?
-Rays
-subatomic particles
-Heat
-light
Learn more about Radioactive isotope at
https://brainly.com/question/1907960
#SPJ4
place the following steps of chymotrypsin hydrolysis of the peptide bond in order: top label: the reaction begins:the reaction begins: position 11 position 1. reorder choice: instability on the carbonyl causes substrate cleavage, and the amino group leaves. instability on the carbonyl causes substrate cleavage, and the amino group leaves. position 22 position 2. reorder choice: an incoming water attacks the acyl-enzyme. an incoming water attacks the acyl-enzyme. position 33 position 3. reorder choice: the side chain binds to a hydrophobic pocket in the enzyme, placing the carbonyl into the oxyanion hole and positioning the peptide bond for attack. the side chain binds to a hydrophobic pocket in the enzyme, placing the carbonyl into the oxyanion hole and positioning the peptide bond for attack. position 44 position 4. reorder choice: the serine protease triad (asp102, his57, ser195) generates a strong nucleophile which attacks the peptide carbonyl group. the serine protease triad (asp102, his57, ser195) generates a strong nucleophile which attacks the peptide carbonyl group. position 55 position 5. reorder choice: a protein enters chymotrypsin's active site. a protein enters chymotrypsin's active site. position 66 position 6. reorder choice: the second product is formed and dissociates, regenerating the enzyme. the second product is formed and dissociates, regenerating the enzyme.
An acylation phase and a diacylation phase are the first two phases of the reaction. The peptide bond is broken and an ester is created between the substrate and enzyme in the first phase.
What is meant by enzyme?The chemical reactions in our bodies, or metabolism, are sped up by proteins known as enzymes. While some substances are constructed, others are disassembled.There are enzymes in all living things. Our bodies generate enzymes on their own. However, food and manufactured goods also contain enzymes.A protein that acts as a biological catalyst is an enzyme. It quickens a specific chemical reaction within the cell. The enzyme is used repeatedly during the reaction and is not destroyed.This facilitates your body's ability to easily absorb and distribute the nutrients from these foods throughout it. There are many different kinds of digestive enzymes, such as amylase, maltase, lactase, lipase, sucrase, and proteases.To learn more about enzyme, refer to:
brainly.com/question/2536131
#SPJ4
Which is true for a diamagnetic salt?
a) It hag an odd number of filled orbitals,
b) It has an odd number of electrons.
c) It has no partially-filled orbitals.
d) It has an even number of filled orbitals.
e) It has at least partially-filled orbital.
Answer:
c) It has no partially-filled orbitals.
Explanation:
Diamagnetic salts are those that do not contain any partially-filled orbitals in their electronic configuration. This is because the electrons in these salts are paired and cancel each other's magnetic fields, making the compound diamagnetic. The number of electrons or the number of filled orbitals does not determine whether a salt is diamagnetic or not. Rather, it is the presence or absence of partially-filled orbitals that determines this property.
Classify each of the following as either macroscopic, microscopic or particulate:a snow ballmacroscopic
a. a red blood cell is microscopic;b.a snow ball is macroscopic;c. baking powder Particulate
a. Microscopic - A red blood cell is too small to be seen with the blind eye and must be observed under a microscope.
b. Macroscopic - A snowball is large enough to be seen with the blind eye
c. Particulate - Baking powder is a fine powder made up of microscopic particles.Macroscopic refers to anything that can be seen with the blind eye . Microscopic refers to anything that requires a microscope to be seen. Particulate refers to materials that are made up of tiny particles or molecules, such as dust, smoke, and gas.
learn more about Macroscopic Refer:brainly.com/question/26101594
#SPJ4
complete question:Classify each of the following as either macroscopic, microscopic or particulate:
a. a red blood cell.
b.a snow ball
c. baking powder.