The appearance of an element is a
Answer:
The correct answer to the following question will be "Element appearance".
Explanation:
Individual elements could even establish a global look that supersedes all components' default configuration as well as appears to apply to something like the factor indicates whereas it makes it appear in illustrations.The appearance of such an element can sometimes be modified around at the individual levels graph or chart.So that the above is the right answer.
If a magnetic field is to exert a force on a current-carrying wire, the field must have some vector component:
A.) parallel with the current
B.) tangential to the current
C.) concentric with the current
D.) perpendicular to the current
Answer:
D.) perpendicular to the current
i am 100% sure :)
2. An ammeter registers 2.5 A of current in a wire that is connected to a 9.0 V
battery. What is the wire's resistance?
Answer:
3.6 Ω
Explanation:
Resistance: This is defined as the opposition to the flow of current in an electric circuit. The S.I unit of Resistance is Ohm's (Ω).
From the question above,
Applying Ohm's law
V = IR...................... Equation 1
Where V = Voltage, I = current registered by the ammeter, R = Resistance.
make R the subject of the equation
R = V/I............... Equation 2
Given: V = 9 V, I = 2.5 A
Substitute into equation 2
R = 9/2.5
R = 3.6 Ω
Hence the resistance of the wire = 3.6 Ω
Please please please please PLEASE help!!!
Brainliest for whoever gets this right!
Describe how an earth wire and a fuse can protect an iPad with a metal casing
- 5 clear simple points
Answer: an earth wire and a fuse can protect an ipad with a metal casing because an earth wire is strong and a fuse is basically a force and if you put them together the work like really good
Explanation:
idk i was just guessing sorry
1. Which Law? When you are standing up in a subway train, and the train suddenly stops, your body continues to go forward.
A. Law 1
B. Law 2
C. Law 3
2. Which Law? A swimmer pushes water back with her arms, but her body moves forward.
A. Law 1
B. Law 2
C. Law 3
3. Which Law? After you start your motorcycle, as you give it more gas, it goes faster.
A. Law 1
B. Law 2
C. Law 3
1. Law 1, since there is no other force acting on your body as you stand there, so you will continue to go forward.
2. Law 3, since the swimmer is using opposite forces to propel herself through the water. She generates a force by pushing the water which helps to push her forward.
3. Law 2, since you are giving the motorcycle more energy as a result of the gas being transformed into the energy that helps to accelerate the motorcycle's speed.
HELP I'll Mark as brainliest!
Answer: Gus sues Russell for stealing postage stamps
Explanation:
What is the purpose of an airbag in a vehicle?
Answer:
Airbags help prevent head, chest and other severe injuries during a car collision. The bag is so designed that it can inflate in less than a second after a car collides; thus, it serves as a cushion and stops the head and chest from hitting the hard surfaces in the car.
Answer:
they prevent injuries and death
Which statement is correct? (2 points)
Group of answer choices
(A) When a positively charged atom loses an electron to a positively charged atom, two neutral atoms are created.
(B) When a neutral atom loses an electron to another neutral atom, two charged atoms are created.
( C ) When a neutral atom loses an electron to a positively charged atom, both atoms become neutral.
(D) When charged atoms lose electrons they will become positively charged atoms.
Answer:
When a neutral atom looses an electron to another neutral atom, two charged atoms are created.
Explanation:
On the off chance that one of the two unbiased particle looses an electron, it turns out to be emphatically (charge: +1), in light of the fact that the electron conveys a charge of - 1. Thus, the other atom which acknowledges the electron turns out to be adversely charged (charge: - 1). And in the end, we will have two charged atoms.
Answer:
C
Explanation:
Remember This, energy cannot be created or destroyed only transfered
etc.
3
How does and charged object become positive?
loses electrons
6
0
O gains electrons
3
9
loses protons
O gains protons
Explain how an image produced by a convex mirror is similar to an image produced by a concave lens.
Which of the following observations demonstrates the differences between speed of light and speed of sound? (Note, they are all true, but which one
represents the difference in the speed?))
A. In space you can see an explosion, but are unable to hear it.
B. A light bulb "pops" when it bums out.
C. You see lightning and then hear the thunder.
D. You are able to hear a sound coming from the apartment next to you, but you cannot see a light coming from a lamp in the apartment
Answer:
Definitely C.
All incident and reflected rays obey which law?
Answer:
law of reflection
Explanation:
A hammer head of mass 600g, produces force
of 360N when it strikes the head of a nail Explain how it's possible for the hammer to
drive the nail into a piece of wood, yet a weight of360N resting on the head of
Nail would not??
Answer:
Explanation:
When a hammer is swung in the air, it accumulates the energy in the form of kinetic energy and this energy is imparted to the nail in an instant produces a
a large amount of force to drive the nail into the wood.
The amount depends upon how large your swing and the size of the hammerhead as more energy will be accumulated if the above process occurs to a greater extent.
Pls answer quick the following is the question
Before 2006, while Pluto was still considered a planet, people used this saying to remember
the nine planet names: “My very excellent mother just sent us nine pizzas.”
Come up with a new sentence to help remember the eight planet names, in order
Answer:
Mother's Visit Evoked My Junior Sister's Unseen Nicenes
Explanation:
Mother's - M - stands for Mercury
Visit - V - Stands for Venus
Evoked - E - Stands for Earth
My - M - stands for Mars
Junior -J - stands for Jupiter
Sister's -S- Stands for Saturn
Unseen -U - stands for Uranus
Niceness - S- stands for Neptune
Monochromatic light is incident on two slits separated by 0,2 mm. An interference pattern is observed on a screen 3,7 m away. The distance between the 3rd dark fringe and the central antinode is 0,048 What is the wavelength of the light? Write your answer in sicentific notation or in decimal form
Answer:
λ = 864 nm
Explanation:
To find the wavelength of the light you use the following formula, which determines the position of the m-th fringe in an interference pattern:
[tex]y_m=\frac{m\lambda D}{d}[/tex] (1)
ym: position of a bright fringe
D: distance from the slits to the screen = 3,7 m
d: distance between slits = 0,2mm = 0,2 *10^-3 m
m: order of the fringe
λ: wavelength of the light
You have the distance from the central peak to the third fringe (0,048m). Then, you can use the equation (1) with m=3 and solve for the wavelength:
[tex]y_3=\frac{3\lambda D}{d}\\\\\lambda=\frac{dy_3}{3D}=\frac{(0,2*10^{-3}m)(0,048m)}{3(3,7m)}=8,64*10^{-7}m\\\\\lambda=864*10^{-9}m=864nm[/tex]
henc, the wavelength of the light is 864nm
What pattern is shown in the graph between fossil fuels and carbon emissions?
Over the years, ( increased / decreased) burning of fossil fuels has caused global carbon emissions to ( increase / decrease / remain the same ).
Hello there!
Over the years, increased burning of fossil fuels has caused global carbon emissions to increase.
consider a silver wire with a radius of 4.0 x 10^-3 meter. determine the cross sectional area of this wire
Answer:
5.024×10⁻⁵ m
Explanation:
A = πr²................ Equation 1
Where A = cross sectional area of the wire, r = radius of the wire, π = pie.
Given: r = 4.0×10⁻³ meter.
Constant: π = 3.14.
Substitute these values into equation 1
A = 3.14(4.0×10⁻³)²
A = 3.14×16×10⁻⁶
A = 50.24×10⁻⁶
A = 5.024×10⁻⁵ m.
Hence the cross sectional area of the wire = 5.024×10⁻⁵ m
The cross sectional area of this wire will be "5.024 × 10⁻⁵ m". To understand the calculation, check below.
Cross-sectional areaAccording to the question,
Radius of silver wire, r = 4.0 × 10⁻³ m
Constant, π = 3.14
We know the formula,
→ Area will be:
A = πr²
By substituting the above values,
= 3.14 × (4.0 × 10⁻³)²
= 3.14 × 16 × 10⁻⁶
= 5.024 × 10⁻⁵ m
Thus the above answer is right.
Find out more information about cross-sectional area here:
https://brainly.com/question/13684765
Which of the following does not require energy to be
accomplished?
Answer:
The answer is B)
When did they start using the word "Scrubbed" for launches?
Answer:
Many speculation exists for why the term 'scrubbed' is used in relation to launches. One of these is that during world war II, when the Air force planned bombing raids. These Air force missions had their briefings done with illustration of the details of the launch and and flight drawn on chalkboards. When some of mission flight takeoffs were canceled (due to bad weather or a malfunction or other reasons) the details were then scrubbed off of the chalkboard. This idea of the mission being scrubbed meaning that it is no longer to be followed through with, proceeded to this modern day rocket and aviation launches.
A toy rocket is fired vertically into the air from the ground at an initial velocity of 80 feet per second. Find the time it will take for the rocket to return to ground level
Answer: 16.3 seconds
Explanation: Given that the
Initial velocity U = 80 ft/s
Let's first calculate the maximum height reached by using third equation of motion.
V^2 = U^2 - 2gH
Where V = final velocity and H = maximum height.
Since the toy is moving against the gravity, g will be negative.
At maximum height, V = 0
0 = 80^2 - 2 × 9.81 × H
6400 = 19.62H
H = 6400/19.62
H = 326.2
Let's us second equation of motion to find time.
H = Ut - 1/2gt^2
Let assume that the ball is dropped from the maximum height. Then,
U = 0. The equation will be reduced to
H = 1/2gt^2
326.2 = 1/2 × 9.81 × t^2
326.2 = 4.905t^2
t^2 = 326.2/4.905
t = sqrt( 66.5 )
t = 8.15 seconds
The time it will take for the rocket to return to ground level will be 2t.
That is, 2 × 8.15 = 16.3 seconds
What happens to the force between two charges if one of the charges are doubled?
it decreased by a quarter
it quadruples
it doubles
it cuts in half
Answer:
The new force between the charges becomes double of the initial force.
Explanation:
The force acting between charge particles is given by :
[tex]F=k\dfrac{q_1q_2}{r^2}[/tex]
k is electrostatic constant
r is distance between charges
If one of the charges are doubled, then, q₁ = 2q₁
The new force becomes,
[tex]F'=\dfrac{2kq_1q_2}{r^2}\\\\F'=2F[/tex]
So, the new force between the charges becomes double of the initial force.
A round asteroid has a surface gravity
of 0.0288 m/s^2. If the mass of the
asteroid is 1.10 x 10^18 kg, what is its
radius?
Answer:
159662.5 I think.
Explanation:
mass 1: 1.10
mass 2:10000000000000000000
distance:159662.5
gravitational force: 0.0288
tell me if I did this right.
what is an electric current
Commercials for a toy bouncy ball advertise that it will bounce to a height that is greater than the
height from which it was dropped. Why is this impossible?
Answer:
because energy will be lost due to friction, sound, and heat (arguably similar to friction) and ENERGY MUST STAY THE SAME so it is IMPOSSIBLE for the ball to bounce higher than when dropped!
Which two conditions would result in the weakest electric force between objects?
Objects are conductors with unbalanced charges
Objects are insulators with balanced charges
Objects are far apart
Objects are close together
The weakest electric force between objects is seen when objects are far apart.
The electric force is the force that exists between two electrically charged bodies. The force could be attractive or repulsive. The electrical force between two bodies is given by Coulomb's law.
The weakest electric force between objects is seen when objects are far apart in obedience to Coulomb's law.
Learn more about electric force: https://brainly.com/question/1076352
Answer:
objects are far apart and Objects are insulators with balanced charges
Explanation:
believe me or not, it's right either way
Material A has a higher thermal conductivity than Material B. Which material will transfer energy by conduction faster?
Answer: a
Explanation:
does anyone know any of these?
Answer:
The last question is one Liter (sorry that is the only question I know for now).
Explanation:
Mainly because 1000cm is the same volume and area for an answer from this equation which is the block of wood.
Sorry that that was the only answer I knew :(
I'll see what else I can find and I'll edit this question later and write the rest of the answers-or any of them that I will know later on :)
I hope this answer helps :)
-EarthGirl
Which are lymphocytes? T-cells and phagocytes phagocytes and saliva saliva and B-cells B-cells and T-cells
Answer:
B-cells and T-cells
Answer:
it's b-cells and t-cells.
Explanation:
got it right on edge.
Explain how your battery works. (You may want to look at the Electric Current lesson) What are some possible materials you could use to make your battery?
Answer:
Batteries have the positive end Cathode, and a negative end of anode. There is also an electrolyte that allows electrical charges to go from the cathode to the anode.
-Anode most often is made of zinc
- Manganese dioxide as Cathode.
- the electrolyte contains ions
Explanation:
GIVE THE OTHER DUDE BRAINLIEST
A battery is made up of three parts. The Cathode (positive end +), the Anode (negative end -), and the electrolyte.
What is the battery?Batteries have a negative end called the anode and a positive end called the cathode. Another electrolyte facilitates the transfer of electrical charges from the cathode to the anode.
Between the cathode and anode, electrical charges can move thanks to the electrolyte. The flow of electricity that results from these chemical reactions provides the electrical voltage potential needed to power a circuit.
The following list includes typical battery materials.
- Zinc is typically used to make anodes.
- The cathode is manganese dioxide.
- There are ions in the electrolyte inside and between.
Therefore, three components make up a battery. The electrolyte, the cathode (positive end +), and the anode (negative end -).
To learn more about batteries, refer to the link:
https://brainly.com/question/13979582
#SPJ2
EXPLAIN Why does passing electricity through a metal filament cause it to
become so hot that it will emit heat and visible light?
Answer:
Why does the material emit light when you pass electrical current through it? When you pass current through a filament material, the resistance creates heat. Atoms in the material absorb energy. Electrons around the atoms are excited and temporarily reach an orbital which is further from the nucleus.
Explanation:
hope this helps u stay safe