Answer:
be able to meet long term timber needs.
Explanation:
Forest Services has been indicated for a long time the exhaustion of timer in the United States. However, in the recent decade, this trend has shown a reverse. The creation of nuclear energy and other technological developments that bring about drastic changes in our way of life. Gradually, the forest has recovered its trees and plants, and it is anticipated that timber will be available to meet long-term wood needs.
Write and balance the following equation: silver phosphate reacts with ammonium sulfide. The coefficient of the precipitate is
Answer:
Answer if yourself Kempner student.
Explanation:
xD
Describe the motion of particles of a gas according to kinetic energy
Base your answers on the graph below, which represents uniform cooling of a sample of a pure substance, starting as a gas. Solid and liquid phases can exist in equilibrium between points
Answer:
D & E
Explanation:
I think this is dealing with latent heat and D & E would be the range where you will find solid and liquid phases in equilibrium, cuz it starts as gas at from A to B, B to C is gas and liquid equilibrium, C to D is liquid, D to E solid and liquid, and then E to F is solid.
Uniform cooling of a pure substance sample that began as a gas. Between points D and E, solid and liquid phases can coexist.
What is solid and liquid equilibrium?Solid-liquid equilibrium describes phase formation and composition in many industrial processes. For example, crystallization is a common unit process used to extract chemicals in pure solid form from a liquid mixture. For the construction of crystallizers, reliable data on the solubility of solids in liquids is required.The formation of a solid phase is indicated by a breakpoint in this curve. The temperature at this point is the solid-liquid equilibrium temperature, and the liquid mixtures' composition determines the solute's solubility in the solvent. Temperature versus solubility phase diagrams under isobaric conditions are commonly used to present SLE data.To learn more about solid and liquid equilibrium, refer to:
https://brainly.com/question/24969033
#SPJ2
A solution is formed by mixing 15.2 g KOH into
1.200 kg water. Use the periodic table to find the
moles of solute.
Answer:
There are approximately [tex]0.271\; \rm mol[/tex] of formula units in that [tex]\rm 15.2\; g[/tex] of [tex]\rm KOH[/tex] (the solute of this solution.)
Explanation:
A solution includes two substances: the solute and the solvent. Note the solution here contains significantly more water than [tex]\rm KOH[/tex]. Hence, assume that water is the solvent (as it is in many other solutions.)
The (molar) formula mass of [tex]\rm KOH[/tex] is necessary for finding the number of moles of
One [tex]\rm K[/tex] atom, One [tex]\rm O[/tex] atom, andOne [tex]\rm H[/tex] atom.The formula mass of [tex]\rm KOH[/tex] will thus be the sum of:
The mass of one mole of [tex]\rm K[/tex] atoms, The mass of one mole of [tex]\rm O[/tex] atoms, andThe mass of one mole of [tex]\rm H[/tex] atoms.On the other hand, the mass (in grams) of one mole of atoms of an element is (numerically) the same as its relative atomic mass. The relative atomic mass data can be found on most modern periodic tables.
Relative atomic mass data from a modern periodic table:
[tex]\rm K[/tex]: [tex]39.098[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].[tex]\rm H[/tex]: [tex]1.008[/tex].For example, the relative atomic mass of [tex]\rm K[/tex] (potassium, atomic number [tex]19[/tex]) is [tex]39.098[/tex] (3 sig. fig.) Hence, the mass of one mole of
The formula mass of [tex]\rm KOH[/tex] is the sum of these three masses:
[tex]\begin{aligned}& M(\mathrm{KOH}) \\ &\approx 39.098 + 15.999 + 1.008 \\ &= 56.105\; \rm g \cdot mol^{-1}\end{aligned}[/tex].
The number of moles of [tex]\rm KOH[/tex] formula units in this [tex]15.2\; \rm g[/tex] sample would be:
[tex]\begin{aligned}n &= \frac{m(\mathrm{KOH})}{M(\mathrm{KOH})} \\ &\approx \frac{15.2\; \rm g}{56.105\; \rm g \cdot mol^{-1}} \approx 0.271\; \rm mol \end{aligned}[/tex].
Answer:
the answer is 0.271
Explanation:
got the right answer on edg 2020
A student requires 2.00 L of 0.100 M NH4NO3 from a 1.75 M NH4NO3 stock solution. What is the correct way to get the solution?
Use M subscript i V subscript 1 equals M subscript f V subscript f..
Measure 114 mL of the 1.75 M solution, and dilute it to 1.00 L.
Measure 114 mL of the 1.75 M solution, and dilute it to 2.00 L.
Measure 8.75 mL of the 1.75 M solution, and dilute it to 2.00 L.
Measure 8.75 mL of the 0.100 M solution, and dilute it to 2.00 L.
Answer:
I believe its B
Explanation:
Answer:
B. Measure 114 mL of the 1.75 M solution, and dilute it to 2.00 L.
7. A 26.4-ml sample of ethylene gas, C2H4, has a pres-sure of 2.50 atm at 2.5°C. If the
volume is increased to 36.2 mL and the temperature is raised to 10°C, what is the
new pressure. (Hint: Three variables have been given so what equation will you
use?)
Answer: 1.87 atm
Explanation:
Combined gas law is the combination of Boyle's law, Charles's law and Gay-Lussac's law.
The combined gas equation is,
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 2.50 atm
[tex]P_2[/tex] = final pressure of gas = ?
[tex]V_1[/tex] = initial volume of gas = 26.4 ml
[tex]V_2[/tex] = final volume of gas = 36.2 ml
[tex]T_1[/tex] = initial temperature of gas = [tex]2.5^oC=273+2.5=275.5K[/tex]
[tex]T_2[/tex] = final temperature of gas = [tex]10^oC=273+10=283K[/tex]
Now put all the given values in the above equation, we get:
[tex]\frac{2.50\times 26.4}{275.5}=\frac{P_2\times 36.2}{283}[/tex]
[tex]P_2=1.87atm[/tex]
The new pressure is 1.87 atm by using combined gas law.
What Science and Math jobs are expected to have much faster than average growth? Check all that apply.
1.Natural Sciences Managers
2.Zoologists and Wildlife Biologists
3.Medical Scientists
4.Food Science Technicians
5 .Biochemists and Biophysicists
6.Mathematical Technicians
Answer:
3.Medical Scientists
5.Biochemists and Biophysicists
Explanation:
Science and Math jobs are expected to have much faster than average growth. Medical Scientists and Biochemists and Biophysicists is correct.
What is biochemist ?Scientists with biochemistry training are known as biochemists. They research the chemistry of living things, including chemical reactions and changes. Biochemists research DNA, proteins, and cellular components. A portmanteau of "biological chemist" is the term "biochemist."
The study of biochemistry focuses on the chemistry of living things. It is a lab-based science that combines chemistry and biology.
Biochemists investigate the makeup, chemistry, and chemical processes of the compounds found in living things in order to understand how they work and how to manipulate them.
Thus, option 3 and 5 both are correct.
To learn more about biochemist follow the link;
https://brainly.com/question/18524947
#SPJ5
Hi i really need help ASAP
Neon in a piston is compressed to a volume of 11 L. Its original volume was 21 L at 11.1 atm. Find the new pressure in atm. Describe what is happening to the gas.
Answer:
The new pressure is 21.19 atm.
Explanation:
Original volume of the gas was 21 L at 11.1 atm
Neon in a piston is compressed to a volume of 11 L.
It is required to find the new pressure in atm. Boyle's law gives the relationship between volume and pressure. Its mathematical form is given by :
[tex]P_1V_1=P_2V_2[/tex]
We have,
[tex]P_1=11.1\ atm\\\\V_1=21\ L\\\\V_2=11\ L\\\\P_2=?[/tex]
Using above equation,
[tex]P_2=\dfrac{P_1V_1}{V_2}\\\\P_2=\dfrac{11.1\times 21}{11}\\\\P_2=21.19\ atm[/tex]
So, the new pressure is 21.19 atm.
What is enthalpy?
A. Enthalpy is the heat involved in a reaction.
B. Enthalpy is the temperature of a reaction.
C. Enthalpy is the mass involved in a reaction.
D. Enthalpy is the kinetic energy of a system.
Enthalpy is the heat involved in a reaction.
The enthalpy change is the sum of the internal energy and the product of volume and pressure. Enthalpy is the heat involved in a reaction. The correct option is A.
What is enthalpy?The enthalpy denotes the measurement of energy in a thermodynamic system. The amount of enthalpy equals to the total heat content of a system, equivalent to the system's internal energy plus the product of volume and pressure.
The enthalpy is described as a state function, which indicates that its value depends only on the state of the system and it is independent of the path by which this state has been reached.
The equation of the enthalpy of system is given as:
H = U + PV
Here the enthalpy is represented by the letter 'H'. It is a very important quantity as it gives how much heat or energy is present in the system.
Thus the correct option is A.
To know more about enthalpy, visit;
https://brainly.com/question/1657608
#SPJ7
Calculate the pH of 0.65 M H2SO4 (sulfuric acid) solution? (Ka2: 1.1x10-2)
Answer:
pH = 0.18
Explanation:
The sulfuric acid (H₂SO₄) has the following reactions in aqueous medium:
H₂SO₄ → HSO₄⁻ + H⁺
HSO₄⁻ ⇄ SO₄²⁻ + H⁺ Ka = 1.1x10⁻²
Where Ka is defined as Ka = [SO₄²⁻] [H⁺] / [HSO₄⁻] = 1.1x10⁻²
Based in the first reaction, [H⁺] = 0.65M and [HSO₄⁻] = 0.65M
In the second reaction, the two species are in equilibrium, thus, concentrations will be:
[H⁺] = 0.65M + X
[HSO₄⁻] = 0.65M - X
[SO₄²⁻] = X
Replacing in Ka formula:
1.1x10⁻² = [X] [0.65 + X] / [0.65M - X]
7.15x10⁻³ - 1.1x10⁻²X = 0.65X + X²
0 = X² + 0.661X - 7.15x10⁻³
Solving for X:
X = -0.67M → False solution. There is no negative concentrations.
X = 0.01065M → Right answer.
Thus [H⁺] = 0.65M + 0.01065M = 0.66065M
As pH = -log [H⁺];
pH = -log 0.66065M = 0.18
Which is the correct oxidation half reaction for the following reaction K2Cr2O7 + H2O + S à SO2 + KOH + Cr2O3
Answer:
[tex]S^0 \rightarrow S^{+4}+4e^-[/tex]
Explanation:
Hello,
In this case, for the reaction:
[tex]K_2Cr_2O_7 + H_2O + S \rightarrow SO_2 + KOH + Cr_2O_3[/tex]
We first must assign the oxidation state of each element:
[tex]K^{+1}_2Cr^{+6}_2O_7^{+2} + H_2^{+1}O^{-2} + S^0 \rightarrow S^{+4}O_2^{-2} + K^{+1}O^{-2}H^{+1} + Cr_2^{+3}O_3^{-2}[/tex]
Thus, we should remember that the oxidation half-reaction applies for the element undergoing an increase in its oxidation state, such case is sulfur, for which passes from 0 to +4 as shown below:
[tex]S^0 \rightarrow S^{+4}+4e^-[/tex]
It means, that four electrons were lost due to the effect of the strong oxidizing agent, potassium dichromate.
Best regards.
what would be considered more dilute? sweet tea or unsweetened tea
Answer:
Unsweetened tea
Explanation:
A concentrated solution is a solution that has more of the solute in it than the solvent (water).
A diluted solution is a solution that has more solvent (water) than the solute.
From the above we can say that the sweet tea contains more of the tea than water i.e it is concentrated hence, the taste is sweet. On the other hand, we can say that the unsweetened tea contains more water than the tea i.e it is diluted hence, the unsweetened taste.
Substituents on an aromatic ring can have several effects on electrophilic aromatic substitution reactions. Substituents can activate or deactivate the ring to substitution, donate or withdraw electrons inductively, donate or withdraw electrons through resonance, and direct substitution either to the ortho/para or to the meta positions.
1. From the following list, select the substituents that have the indicated property. The substituents are written as -XY, where X is the atom directly bound to the aromatic ring.
a. Activation of the ring towards substitution
i. -CF3
ii. -NO2
iii. -OCOCH3
iv. -NH2
Answer:
iv. -NH₂
Explanation:
The amine group is an activating substituent and provides an ortho-para orientation.
The free electrons in the nitrogen atom provide stabilization by resonance in the sigma complex if the attack by the electrophilic reactant occurs in the positions ortho or para with regards to the nitrogen atom.
Identify the outer electron configurations for the (a) alkali metals, (b) alkaline earth metals, (c) halogens, (d) noble gases. (a) Alkali metal: ns,1 ns2, ns2np1, ns2np2, ns2np3, ns2np4, ns2np5, ns2np6. (b) Alkaline earth metals: ns1, ns2, ns2np1, ns2np2, ns2np3, ns2np4, ns2np5, ns2np6. (c) Halogens: ns1, ns2, ns2np1, ns2np2, ns2np3, ns2np4, ns2np5, ns2np6. (d) Noble gases: ns1, ns2, ns2np1, ns2np2, ns2np3, ns2np4, ns2np5, ns2np6.
Answer:
Explanation:
Alkali metals ------ outermost orbit containing one electron
ns²np¹
Alkaline metals -------- outermost orbit containing two electron
ns²np²
halogens --------------- outermost orbit containing seven electron
ns²np⁵
noble gas --------------- outermost orbit containing eight electron
ns²np⁶.
Which type of rock is Most likely to form because of high heat and pressure
Answer:
Metamorphic rock
Explanation:
Answer:
metamorphic
Explanation:
just took the test
Which statement is true regarding reaction rates?
A.
Temperature does not affect the reaction rate.
B.
Increasing temperature or adding a catalyst will decrease the reaction rate.
C.
Increasing temperature or adding a catalyst will increase the reaction rate.
D.
Decreasing temperature and adding a catalyst will increase the reaction rate.
E.
A catalyst does not affect the reaction rate.
Answer:
THE TRUE STATEMENTS REGARDING REACTION RATE IS "INCREASING TEMPERATURE OR ADDING A CATALYST WILL INCREASE THE REACTION RATE".
Explanation:
The rate of a chemical reaction is the number of moles of reactant converted or product formed per unit time. There are various factors that affect reaction rate and they include;
1. Nature of the reactant
2. concentration and pressure of reactants. pressure is for gases.
3. temperature of the reactants.
4. surface areas of the reactants
5. presence of light
6. presence of catalyst.
I will talk about the role of temperature and catalyst in reaction rate.
TEMPERATURE:
The rate of virtually all reactions (chemical) increase when the temperature is increased. increasing the temperature of a system both exothermic and endothermic reactions, energy in the form of heat is supplied to the system which thus increases the number of particles with energies equal to or more than the activation energy of the system. This increase in particles leads to increase in collision and thus the reaction proceed faster.
CATALYST
A catalyst is a substance which alters the rate of a chemical reaction but remains unchanged at the end of the reaction. Catalyst operates by providing an alternative route for the reaction to occur. So adding a catalyst and has a lower activation energy when added increases the rate of reaction as more particles can collide with each other. This kind of catalyst is called positive catalyst. A catalyst that provides an alternative route with a higher activation energy is called negative catalyst.
A sample of gas had a volume of 20.0 liters at 00C and 1520 torr. What would be the volume of this gas sample at 00C and 760 torr?
Answer:
40.0 L
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
Given the potential energy diagram representing a reaction below, which numbered interval represents the heat of reaction?
Answer:
2
Explanation:
Heat of reaction is usually the difference of heat of products and heat of reactions. The difference here is represented by the letter 2.
The potential energy diagram has been representing the heat of reaction at interval 2.
The heat of reaction has been defined as the difference in the heat of product and reactant. The potential energy has been the stored energy of the compounds.
Potential Energy Diagram:In the given potential energy curve, the heat of reaction has been found to be the increase in potential energy. There has been an increment in the energy at interval 2.
Thus, the potential energy diagram has been representing the heat of reaction at interval 2.
For more information about potential energy, refer to the link:
https://brainly.com/question/21288807
What role does wind play in mechanical weathering?
Which represents the self-ionization of water at 25°C?
O A. H2O + H20 = 2H2 + O2
OB.
H2O + H2O = H2O2 + H2
O C.
H2O + H2O = 4H+ + 202-
OD.
H2O + H20 = H30+ + OH-
Answer:
D
Explanation:
H2O + H20 = H30+ + OH-
what are the IUPAC names of the following compounds?
a,manganesse dioxed
b,mercurous chloride
c,ferric nitrate
d,titanium tetrachloride
e,cupric bromide
Answer:
a. Manganese(IV) oxide
b. Mercury(I) chloride
c. Iron(III) nitrate
d. Titanium(IV) chloride
e. Copper(II) bromide
Explanation:
The IUPAC nomenclature is regulated by International Union of Pure and Applied Chemistry which is used in organic chemistry for naming of the organic chemical compounds.
a. Manganese(IV) oxide is IUPAC name of manganesse dioxed . It is an inorganic compound having the formula MnO2.
b. Mercury(I) chloride is IUPAC name of mercurous chloride . It is also known as the mineral calomel and have a chemical formula Hg2Cl2.
c. Iron(III) nitrate is IUPAC name of ferric nitrate . It have a chemical formula Fe(NO₃)₃.
d. Titanium(IV) chloride is IUPAC name of titanium tetrachloride - . It have a chemical formula TiCl4.
e. Copper(II) bromide is IUPAC name of cupric bromide with chemical formula CuBr2 or Br2Cu.
How do limiting factors affect organisms in a community
Answer: Both biotic and abiotic limiting factors can limit organisms' ability to live or reproduce.
Explanation:
penn foster
what is the full form of DNA
Answer:
Deoxyribose Nucleic Acid
Answer:
The Full form of DNA is Deoxyribonucleic acid. Deoxy means lack of an oxygen atom, Ribo means ribose sugar, Nucleic is found in the nucleus of cell and Acid contains negatively charged phosphate ion which is acidic.
Can you please help me?
Answer:
60 moles of NaF
Explanation:
The balanced equation for the reaction is given below:
Al(NO3)3 + 3NaF —> 3NaNO3 + AlF3
From the balanced equation above,
3 moles of NaF reacted to produce 1 mole of AlF3.
Therefore, Xmol of NaF will react to produce 20 moles of AlF3 i.e
Xmol of NaF = 3 x 20
Xmol of NaF = 60 moles
Therefore, 60 moles of NaF are required to produce 20 moles of AlF3.
Which statement best describes the formation of a solution?
A large amount of solute is dissolved in a smaller amount of solvent.
A small amount of solute is dissolved in a larger amount of solvent.
A small amount of solvent is dissolved in a larger amount of solute.
A large amount of solvent is dissolved in a larger amount of solute.
Answer:
A small amount of solute dissolved in a larger amount of solvent.
Take this analogy to help you understand, if you were to put a teaspoon of sugar in a liter of water it would dissolve, but if you put a sack of sugar in it it would not dissolve! The solute is what is being dissolved and the solvent is what dissolves the solute, so that eliminates some of the options.
Which of the following reactions best represents the reaction between H3PO4
and water?
A) H3PO4 + H2O ⇌ H2PO4
- + H2O
B) H3PO4 + H2O ⇌ H2PO4
- + H3O+
C) H3PO4 + 3 H2O → PO4 3- + 3 H2O
D) H3PO4 + 3 H2O → PO4 3- + 3 H3O+
Answer:
Option B, [tex]H3PO4 + H2O <==> H3O^+ + H2PO4^-[/tex]
Explanation:
In this reaction, a weak acid is reacting with water. Thus, water is this case will act as a proton acceptor or a base as well as an acid. Hence water will be amphiprotic for this chemical process and can donate as well accept as a proton. Now when weak acid such as phosphoric acid loses a hydrogen ion it forms a weak conjugate base ie. H2PO4^-. Water being a weak base shall accept the proton and forms hydronium ion i.e H3O^+
The dihydrogen phosphate ion reacts with water:
H2PO4^- + H2O <----> HPO4^2- + H3O^+
After some time a proton is again transferred to the H2O molecule to produce phosphate ion
HPO4^2- + H2O <----> H3O^+ + PO4^3-
Which event most likely occurs at point k?
Answer:The answer is C melting.
Explanation:
Answer:melting
Explanation:
A box sits on a table. An arrow labeled F subscript N points up. An arrow labeled F subscript g points down. An arrow labeled F subscript P points right. An arrow labeled A points left. The box is at rest on the table. Which force is represented by vector A? sliding friction rolling friction static friction fluid friction
Answer:
Static Friction
Explanation:
Answer:
The answer is Static Friction
Explanation:
A student measures the mass of a clean, dry flask and stopper is measured using a laboratory balance. The mass of the empty stoppered flask is 36.724 g. The flask is then filled with deionized water and the mass of the filled stoppered flask is determined to be 65.858 g. The mass of the filled stoppered flask equals the sum of the mass of the empty stoppered flask plus the mass of the water. what is the volume of the flask?
Answer:
Volume of flask = 29.134 cm³
Explanation:
Mass of water = mass of filled stoppered flask - mass of empty stoppered flask.
Mass of water = 65.858 - 36.724 = 29.134 g
Density of water = 1 g/cm³
Volume = mass/ density
Volumeof water = 29.134 g/ 1g/cm³ = 29.134cm³
Therefore, volume of flask = 29.134 cm³
Answer:
The volume of the flask is 103.6 g
Explanation:
We know that density is equals to mass per unit volume. So for finding the volume, we have to put the values of masses of water and flask and density of water in the formula.
First the masses of both water and flask is added which is 102.6 g and the density of water is 0.997 g/cm3. So by puting these values in the formula of volume i. e. volume = mass/ density, so we get 103.6 cm3 volume.
Please help me
*science *
Answer: Solar energy
Explanation:
Solar energy because it has more clear and sunny skys
Hello there!
An alternative energy source that is best for Coalville is wind energy.
The first two options, solar power and hydroelectric power aren't very good options since solar power requires lots of sun and they only receive 70 days of sun. While, hydroelectric power isn't a good choice either since it is a small stream meaning very little water and not big enough to build a dam on.
Therefore, wind energy is the best idea since high wind speeds are good to spin the wind turbines. The faster the wind the more energy is produced. Coalville has an average windspeed of 20 mph which is quite fast so that will the best option.