Answer:
boundary interactions: areas where plates move away from each other forming mid-ocean ridges or rift valleys.
divergent boundaries: this happens when 2 tectonic plates move away from each other. along these boundaries earthquakes and magma are common as they are rise from the mantle to the sruface making new oceanic crust.
convergent boundaries: this is an area on earth where 2 or more lithospheric plates collide. they will slide under one another creating a subduction.
transform boundaries: transform boundary is a fault along a plate boundary where the motion is predominantly horizontal. It ends abruptly where it connects to another plate boundary, either another transform, a spreading ridge, or a subduction zone.
Explanation:
lithosperic means the solid outer part of the earth.
hope this helps and good luck! :) <3
Does it matter which of the two sp3sp3 hybrid orbitals are used to hold the two nonbonding electron pairs
Answer:
No. All four hybrids are equivalent and the angles between them are all the same, so we can use any of the two to hold the nonbonding pairs.
Explanation:
Orbital hybridization has been the combination of the atomic orbitals for the formation of a new hybrid. No, it does not matter which orbitals are used to hold the nonbonding electron pairs.
What are hybrid orbitals?Hybrid orbitals are said to be formed by the mixing of the atomic orbitals with different energy and geometrical shape that allows the understanding of the atomic bonding and molecular geometry of the compounds.
It includes sp, sp², sp³, sp³d, and sp³d² which have various arrangements, including linear, trigonal planar, tetrahedral, trigonal bipyramidal, and octahedral. The hybrid orbitals are formed by the combination and overlapping of the s and p orbital.
It does not matter which sp³ orbital holds the two non-bonding electron pairs as all four hybrids have been known to have equivalent angles between them so it will not matter which hybrid has the non-bonded electrons in them.
Therefore, it will not matter which two sp³ hybrid holds the electron pairs that are not involved in bonding.
Learn more about orbital hybridization, here:
https://brainly.com/question/16251845
#SPJ6
How many moles of H2O2 are needed to react with 1.07 moles of N2H4?
Answer:
2.14 moles of H₂O₂ are required
Explanation:
Given data:
Number of moles of H₂O₂ required = ?
Number of moles of N₂H₄ available = 1.07 mol
Solution:
Chemical equation:
N₂H₄ + 2H₂O₂ → N₂ + 4H₂O
now we will compare the moles of H₂O₂ and N₂H₄
N₂H₄ : H₂O₂
1 : 2
1.07 : 2×1.07 = 2.14 mol
A chemist heats 34.10 g of nickel to 77.17 °C, then places the metal sample in the cup of water shown in the interactive.
Calculate the final temperature of the water. The specific heat of nickel is 0.444 J/g °C and the specific heat of water is
4.184 J/g °C.
Answer:
[tex]T_{eq}=27.97\°C[/tex]
Explanation:
Hello.
In this case, for equilibrium temperature problems, it is said that the heat balance allows us to notice how the hot substance heats up the cold substance until they reach the equilibrium temperature which is a temperature that remains constant upon time. Thus, since here the hot substance is the nickel and water gains that released heat by the nickel we can write:
[tex]Q_{Zn}=-Q_{water}[/tex]
Which can be written in terms of temperatures, masses and specific heats:
[tex]m_{Zn}C_{Zn}(T_{eq}-T_{Zn})=-m_{water}C_{water}(T_{eq}-T_{water})[/tex]
Thus, solving for the equilibrium temperature we write:
[tex]T_{eq}=\frac{m_{Zn}C_{Zn}T_{Zn}+m_{water}C_{water}T_{water}}{m_{Zn}C_{Zn}+m_{water}C_{water}}[/tex]
Now, plugging in the known data, considering the mass of water 64.00-4.00=60.00 g and its initial temperature, 25.00°C, we obtain:
[tex]T_{eq}=\frac{34.10g*0.444\frac{J}{g\°C}* 77.17\°C+60.0g*4.184\frac{J}{g\°C}*25.00\°C}{34.10g*0.444\frac{J}{g\°C}+60.0g*4.184\frac{J}{g\°C}}\\\\T_{eq}=27.97\°C[/tex]
Best regards!
The final temperature of water is required.
The final temperature of water is [tex]27.97^{\circ}\text{C}[/tex].
T = Equilibrium temperature
[tex]T_n[/tex] = Temperature of nickel = [tex](77.17^{\circ}\text{C}+273.15)\ \text{K}[/tex]
[tex]T_w[/tex] = Temperature of water = [tex](25^{\circ}\text{C}+273.15)\ \text{K}[/tex]
[tex]c_n[/tex] = Specific heat of nickel = [tex]0.444\ \text{J/g}^{\circ}\text{C}[/tex]
[tex]c_w[/tex] = Specific heat of water = [tex]4.184\ \text{J/g}^{\circ}\text{C}[/tex]
[tex]m_n[/tex] = Mass of nickel = 34.1 g
[tex]m_w[/tex] = Mass of water = 60 g
The heat balance of the system is given by
[tex]m_wc_w(T-T_w)=m_nc_n(T_n-T)\\\Rightarrow m_wc_wT-m_wc_wT_w=m_nc_nT_n-m_nc_nT\\\Rightarrow T=\dfrac{m_nc_nT_n+m_wc_wT_w}{m_wc_w+m_nc_n}\\\Rightarrow T=\dfrac{34.1\times 0.444\times 350.32+60\times 4.184\times 298.15}{60\times 4.184+34.1\times 0.444}\\\Rightarrow T=301.12\ \text{K}=301.12-273.15\\\Rightarrow T=27.97^{\circ}\text{C}[/tex]
The final temperature of water is [tex]27.97^{\circ}\text{C}[/tex].
Learn more:
https://brainly.com/question/19327113?referrer=searchResults
Describe how to calculate the average atomic mass for the following element.
Isotopes: % Abundance:
neon-20 90.00%
neon-22 10.00%
Answer:
Average atomic mass = 20.2 amu
Explanation:
Given data:
Average atomic mass of neon = ?
Abundance of Ne-20 = 90.00%
Abundance of Ne-22 = 10.00%
Solution:
Average atomic mass = (abundance of 1st isotope × its atomic mass) +(abundance of 2nd isotope × its atomic mass) / 100
Average atomic mass = (90.00×20)+(10.00×22) /100
Average atomic mass = 1800 + 220 / 100
Average atomic mass = 2020 / 100
Average atomic mass = 20.2 amu.
A quantity of water vapor at 100°C is condensed to liquid water at the same temperature. In the process, 180,414.08 joules of heat are released. What is the quantity of water that is condensed?
Answer:
0.08kg
Explanation:
Given parameters:
Temperature of water = 100°C
Quantity of heat released = 180414.08J
Unknown:
Quantity of water condensed = ?
Solution:
This is simple phase change process without any attendant change in temperature.
To solve this problem, use the formula below;
H = mL
H is the heat released
m is mass
L is the latent heat of condensation of water = 2260 kJ/kg
Insert the parameters and solve;
180,414.08 = m x 22.6 x 10⁵ J/kg
m = [tex]\frac{180414.08}{2260000}[/tex] = 0.08kg
A student determines that a 1.5 g mixture of CaCO3(s) and
NaHCO3(s) contains 0.010 mol of NaHCO3(s). Based on the student's
measurement, what is the mass percent of Na in the mixture?
We are given:
Mass of the mixture = 1.5 grams
Number of Moles of NaHCO₃ = 0.01 mole
Mass of 0.01 moles of NaHCO₃:
Mass = number of moles * Molar mass
Mass = 0.01 * 84
Mass = 0.84 grams
Mass% of Na in NaHCO₃:
Molar mass of NaHCO₃ = 84 grams/mol
Molar mass of Na = 23 grams / mol
Mass% = (Molar mass of Na / Molar mass of NaHCO₃) * 100
Mass% = (23/84) * 100
Mass% = 27%
Mass of Na in 0.01 moles:
Since the Mass% of Na is 27% and the total mass is 0.84 grams
So, we can say that 27% of 0.84 is the mass of Na
Mass of Na = 0.84 * 0.27
Mass of Na = 0.23 grams
Mass% of Na in the mixture:
Total mass of the mixture = 1.5 grams
Mass of Na in the mixture = 0.23 grams
Mass% of of Na in the Mixture = (Mass of Na / Mass of Mixture) * 100
Mass% of Na = (0.23 / 1.5) * 100
Mass% of Na = 15.3%
Therefore, we have 15.3% Na in the given mixture by mass
Which transition is associated with an emission of energy?
n = 5 to n = 4
n = 4 to n = 7
Answer:
n = 4 to n = 7
Explanation:
heat transfer through any intermediate fluid is known as?
Answer:
convection
Explanation:
Answer: At the beach, differences in temperatures create wind which transfers heat between the land and the water. ... Heat transfer through any intermediate fluid is known as
(A.) Condensation.
A reservoir could supply an urban setting with (1 point
A safe drinking water from
a rural part of the state.
B a good swimming spot for families.
C a good source of wind-created energy.
D freedom from annual river flooding.
WHAT PROBLEMS DID PRESIDENT JEFFERSON HAVE WITH TRIPOLI AND HOW DID HE SOLVE THEM
Answer:
Although Thomas Jefferson came to power determined to limit the reach of the federal government, foreign affairs dominated his presidency and pushed him toward Federalist policies that greatly contrasted with his political philosophy. The first foreign episode involved Jefferson's war with the Barbary pirates. For the previous century or so, Western nations had paid bribes to the Barbary states, which would later become Morocco, Algeria, Tunis, and Tripolitania, to keep them from harassing American and merchant ships
Explanation:
Testbank, Question 098 In the reaction between an alkyne and Na metal in liquid ammonia, the role of Na is as a(n) ___________.
a. catalyst
b. electrophile
c. Brønsted base
d. reducing agent
e. Bronsted acid
Answer:
d. reducing agent
Explanation:
Na acts as a reducing agent. A reducing agent is a substance whose function is to reduce or donate electrons to another, and by doing so it becomes oxidized. We can see the mechanism of the reaction in the image attached below.
A 9.439 mol sample of oxygen gas is maintained in a 0.8200 L container at 304.4 K. What is the pressure in atm calculated using the van der Waals' equation for O2 gas under these conditions
Answer:
[tex]P=273.1atm[/tex]
Explanation:
Hello!
In this case, since the Van der Waals' equation is used in order to analyze a gas slightly deviated from the ideal condition and is defined as:
[tex]P=\frac{RT}{v_m-b}-\frac{a}{v_m^2}[/tex]
Whereas a and b for oxygen are 0.0318 L/mol and 1.36 atm*L²/mol² respectively and represent the effective volume and the eventual interactions among the gas molecules. Moreover, the molar volume, vm, is:
[tex]v_m=\frac{0.8200L}{9.439mol}=0.08687L/mol[/tex]
Thus, the required pressure turns out:
[tex]P=\frac{0.082\frac{atm*L}{mol*K}*304.4K}{0.08687L/mol-0.0318L/mol}-\frac{1.36\frac{atm*L^2}{mol^2} }{(0.08687L/mol)^2}\\\\P=453.3atm-180.2atm\\\\P=273.1atm[/tex]
Best regards!
The half-life of the radioactive isotope Carbon-14 is about 5730 years.
a. What percentage of the original amount of Carbon-14 is left after 20,000 years?
b. If an old wooden tool is found in a cave and the amount of Carbon-14 present in it is estimated to be only 42% of the original amount, approximately how old is the tool?
c. Radiocarbon dating is not as easy as these exercises might lead you to believe. With the help of your classmates, research radiocarbon dating and discuss why our model is somewhat over-simplified.
Answer:
See explanation for details
Explanation:
a) Now from the data given, recall that;
N/No = (1/2)t/t1/2
Where,
N= amount of radioactive material remaining at time t
No= Amount of radioactive material originally present
t= time taken for N amount of radioactive material to remain
t1/2= half life of radioactive material
So,
N/No = (1/2)^20,000/5730
N/No = (1/2)^3.49
N/No = 0.089
Since the fraction N/No is the fraction remaining after t years, then;
Percentage of Carbon-14 left after 20,000 years = 0.089 * 100 = 8.9%
b) From;
0.693/t1/2 = 2.303/t log No/N
Given that N = 0.42 No
Hence;
0.693/5730 = 2.303/t log (No/0.42No)
1.21 * 10^-4 = 0.87/t
t= 0.87/1.21 * 10^-4
t = 7190 years
c) Radiocarbon dating is a method of obtaining the age of an object derived from plants or animals by comparing the Carbon-14 activity of living things with that of the sample under study. Due to contamination, the age of artifacts obtained by Carbon-14 dating may yield outlying figures.
3.
A gas at 1.1 atm and 30°C occupies a volume of 41mL. What volume will the gas occupy at STP
conditions?
which part of earth absorbs the most sunlight?
A oceans
b soil
c atmosphere
d rivers and lakes
Answer:
atmosphere
Explanation:
The atmosphere absorbs the most in light because the atmosphere surrounds our planet
Answer:
c
Explanation:
does living organism capable of both process
Yes because it can produce unlike nonliving organism
If the temperature outside is 60°F, what is the approximate temperature on the Celsius scale and the Relvin scale?
If the air temperature drops to 30°F during the night, how has the kinetic energy of the air particles changed?
KE at 30°F=0.942 KE at 60°F
Further explanationThe average kinetic energy value is only affected by temperature changes. The higher the temperature, the average kinetic energy of the molecule increases
This molecule is very small when compared to the distance between molecules, so the volume of gas contains mostly empty space
Gas particles move randomly (both speed and direction , as vector)
Average velocities of gases can be expressed as root-mean-square averages. (V rms)
[tex]\large{\boxed{\bold{v_{rms}=\sqrt{\frac{3RT}{Mm} } }}[/tex]
R = gas constant, T = temperature, Mm = molar mass of the gas particles
Kinetic energy :
[tex]\tt KE=\dfrac{1}{2}mv^2[/tex]
The temperature outside is 60°F
Convert to Celcius and Kelvin
°C = 5/9 (°F-32)
[tex]\tt ^OC=\dfrac{5}{9}(60-32)=15.56[/tex]
°K = °C + 273
[tex]\tt ^oK=15.56+273=288.56[/tex]
For 30°F :
[tex]\tt ^oC=\dfrac{5}{9}(30-32)=-1.1\\\\^oK=-1.1+273=271.9[/tex]
KE at 288.56 °K(60 °F)[tex]\tt KE_1=\dfrac{1}{2}m.\dfrac{3R.288.56}{Mm}[/tex]
KE at 271.9°K(30°F)[tex]\tt KE_2=\dfrac{1}{2}m.\dfrac{3R.271.9}{Mm}[/tex]
[tex]\tt \dfrac{KE_2}{KE_1}=\dfrac{271.9}{288.56}=0.942\\\\KE_2=0.942KE_1[/tex]
Which graph shows the pressure-temperature relationship for a gas at a fixed volume?
A. Graph D
B. Graph B
C. Graph A
D. Graph C
Answer:
The answer is
C. Graph A
Answer:
Graph A
Explanation:
:)
PLEASE HELP ASAP WILL MARK YOU BRAINLIEST!!!!!! :)
Question 13
Convert 178,300 mL into L. Use 1,000 mL/L as your conversion factor.
1.73 L
178.3 L
0.1783L
17.83
Answer:
B. 178.3
178,300 divided by 1,000 is 178.3
Answer:
178.3L
Explanation:
1mL=0.001L
178300mL=?
we just criss-cross it
178300×0.001=178.3L
atoms that vary in the number of neutrons found in their nuclei are called?
Answer:
Isotopes are atoms of an element with the normal number of protons and electrons, but different numbers of neutrons. Isotopes have the same atomic number, but different mass numbers. GOOD LESSONS♡
A flammable liquid with many branches of carbon and hydrogen atoms forming a complex molecules
What are 2 ways that convection currents in the oceans distribute the sun's energy?
A: warm water is carried from the equator to the poles
B: living things swim in the cool and warm parts of the ocean
C: icebergs are carried from the poles to the equator
D: Nutrient-rich water is brought to the ocean surface
Answer:
When air in contact with the ocean is at a different temperature than the sea surface, heat transfer by conduction takes place. The ocean also absorbs and stores energy from the sun, and when precipitation falls, it releases heat energy into the atmosphere.
Hope it helps:)
Answer:
A and D
Explanation:
what is the most likely arrangement of particles in a liquid?
O Farther apart and hire an
energy than those in a gas
O Farther apart and lower energy than those in a solid
O Closer together in lower and energy than those in gas
O Closer together and Lauren energy than those in a solid
Answer:
c. closer together and lower in energy than those in a gas.
Explanation:
In the different states of matter, the arrangement of particles and the kinectic energy that exists in the state of matter varies depending on which state the matter is in.
The particles of Solid are denser and closer than that of liquid. In solid state, the force of attraction between the particles are greater than the kinectic energy of the particles in a solid matter. Therefore, the particles in solid matter are closer together than those in liquid and gas. And also, the energy is lower in Solid matter than those in liquid and gas.
Liquid on the other hand, has denser particles that are closer together than those in gas. Also, liquid particles has lower energy than those in gas.
Particles in gas are more freer and farther apart from each other than the particle sin solid and gas. Also, particles in gas is greater than those in liquid and solid.
Therefore, the likely arrangement of particles in a liquid is that they are:
c. closer together and lower in energy than those in a gas.
What happens as a roller-coaster car rises up the first hill of its track?
A.
is potential energy increases.
B. Its kinetic energy increases.
O C. Its potential energy decreases.
D. Both its kinetic and potential energy decrease.
SUBMIT
Which statement describes effusion?
It occurs when a gas passes through a tiny hole.
It occurs when a liquid passes through a tiny hole.
It occurs when gas molecules disperse throughout a container.
It occurs when a liquid disperses throughout a container.
Answer:
A. It occurs when a gas passes through a tiny hole.
Explanation:
Edge2020
Have a great day y'all :)
An element has the mass number 12 and atomic number 6. The number of neutron in it is?
A)6
B)10
C)4
D)8
Answer:
12-6=6
the answer is A)6
Which of these compounds is most likely to contain an ionic bond?
O CaCl2
O CHA
SO2
O H2
Answer:
O CaCl₂
Explanation:
The compound most likely to contain an ionic bond is CaCl₂ because it is the only specie with a metal and non-metal.
The metal here is Ca and non-metal is Cl.
In this bond type, there is a transfer of electrons from the metal to the non-metal. There must be a significant electronegativity difference between the two bodies for this bond to form. The metal Calcium loses two electrons and becomes isoelectronic with argon. Two chlorine non-metal gain one of the electrons each and becomes stable. The electrostatic attraction between the oppositely charged ions results in the ionic bonding.Coolant is added to car radiators to keep the water from becoming a gas and evaporating when the car gets hot. Which physical property of water is the coolant affecting in this case?
Answer:
Boiling point.
Heat is required to break the intermolecular forces of attraction between the particles. The role of coolant is to lowers the freezing point of water, and to increase the boiling point of water.
What is phase transition?Phase transition is a process in which transition takes place from one state to another of a medium on changing temperature or pressure. Phase transition is a physical process as there is no breaking of old bond and forming of new bonds takes place.
Coolant is added to car radiators to keep the water from becoming a gas and evaporating when the car gets hot. The role of coolant is to lowers the freezing point of water, and to increase the boiling point of water.
Therefore, the role of coolant is to lowers the freezing point of water, and to increase the boiling point of water.
To learn more about phase transition, here:
https://brainly.com/question/3255181
#SPJ2
What is the mass of 2.8 x 10^22 formula units of Na OH
Answer:
Mass = 1.85 g
Explanation:
Given data:
Number of formula units = 2.8×10²²
Mass of NaOH = ?
Solution:
1 mole contain 6.022×10²³ formula units
2.8×10²² formula units × 1 mol /6.022×10²³ formula units
0.46×10⁻¹ mol
0.046 mol
Mass of NaOH:
Mass = number of moles × molar mass
Mass = 0.046 mol × 40 g/mol
Mass = 1.85 g
Heat energy is useful to us in all the following ways except:
Heat energy can be harnessed to warm homes.
Heat is converted to mechanical energy in engines to do work.
Heat energy can be used to melt materials and change their shape to create useful objects.
Heat energy is transferred to cooler objects to reduce the temperature of those objects.
Answer:
Heat energy is transferred to cooler objects to reduce the temperature of those objects.
Explanation:
The fourth option is not correct.
A correct way of writing it would be : " Heat energy is transferred from cooler objects to reduce the temperature of those objects.". When an object loses heat energy, its temperature reduces. Conversely, when an object receives heat energy, its temperature increases.