How is MLA citation arranged?

Answer:

99 joules.

Explanation:

Let m denotes mass of the object and v denotes velocity.

If mass has units of kilograms and the velocity has units of meters per second then the kinetic energy has units of joules.

Kinetic energy is an energy possessed by a body in motion.

Mass (m) = 99 kg

Velocity (v) = 2 m/s

To find kinetic energy, use the following formula:

Kinetic energy = [tex]\frac{1}{2}mv^2=\frac{1}{2}(99)(2)=99[/tex] joules

Answer:

111dB

Explanation:

First, find the intensity of the sound using the formula I = Power / 4 x pi x radius ^2

So

60.0 / (4 x 3.14 (6.25)^2)

= 0.122

Then plug that into the equation to find sound level, which is 10log( I / Io)

Io being (1 x 10^-12)

So

10log(0.122 / 1 x 10^-12)

= 111dB

Hope this helps :)

Answer:

a) Yes because spiderman isn’t part of the system (the train), so he exerts an external force on the system, causing it to slow. The sign is negative because the train is slowing negative.

b) The train was initially moving, so it had kinetic energy, the energy of movement. There isn’t the same amount anymore because spiderman did work onto the train. Work is defined by the change of kinetic energy of the system, so the train didn’t have the same amount of that type of energy at the end.

I hope this helps! :)

1 watt = 1 joule/second

1 KW = 1,000 joule/second

Work = (power) x (time)

3.6 x 10⁴ J = (2,984 joules/second) x (time)

time = (3.6 x 10⁴J) / (2,984 J/s)

time = (36,000J) / (2,984 J/s)

time = 12.06 seconds

Answer: 6V

Explanation: parallel circuit, the voltage is the same for each resistor.

Answer: The gravitational force acting on the table.

Explanation:

Answer:

- 0.0481666 °C^-1

Explanation:

Linear expansivity of brass, α

α = (2T - 2T0) / T0.dt

T0 = 30°

dt = change in temperature = 30 - 10 = 20°C

T = 15.55 sec

α = (2*15.55 - 2*30) / 30*20

α = (31.1 - 60) / 600

α = - 28.9 / 600

α = - 0.0481666 °C^-1

Answer:

5.2 Ω.

Explanation:

What is the resistance for each resistor

Since the resistors are connected in series and each have resistance R, and their equivalent resistance is R' = 15.6 Ω.

Since they are connected in series, R' = R₁ + R₂ + R₃

Since R₁ = R₂ = R₃ = R

R' = R + R + R = 3R

R' = 3R

R = R'/3

R =  15.6 Ω/3

R =  5.2 Ω

So, the resistance of each resistor is 5.2 Ω.

Answer: Warm water from the ocean is needed to develop typhoon

Pls Rate this as Brilliant Answer thank you :) keep on learning

Typhoons form when strong winds blow into warm areas of the ocean. These winds pick up moisture and rise, bringing colder air with them. This creates pressure, causing the winds to move quickly. The winds revolve or spin around a central point known as an eye.

A typhoon is a mature tropical cyclone that forms in the Northern Hemisphere between 180° and 100°E. The Northwestern Pacific Basin is the most active tropical cyclone basin on Earth, accounting for nearly one-third of the world's annual tropical cyclones.

The Philippines is just above the equator and faces the western Pacific, with little else to absorb storm energy before it reaches land. Storms are fueled by warm, tropical waters, which produce approximately 20 typhoons per year.

Hurricanes and typhoons can wreak havoc on coastlines and hundreds of miles inland. They can generate winds of up to 155 mph, as well as tornadoes and microbursts.

Thus, Typhoons form when strong winds blow into warm areas of the ocean.

To learn more about typhoon, follow the link;

https://brainly.com/question/1933929

#SPJ5

Explanation:

Newton's first law states that, if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.

Answer:B

Explanation:

Answer:

force increases

Explanation:

Newton's law of universal gravitation states that the force of attraction (gravity) acting between the Earth and all physical objects is directly proportional to the Earth's mass, directly proportional to the physical object's mass and inversely proportional to the square of the distance separating the Earth's center and that physical object.

According to Newton’s law of universal gravitation, as the mass or one or both bodies increases, the force of attraction between the bodies increases.

Mathematically, this is given by the Newton's Second Law of Motion;

Force = mass * acceleration.

Answer:

Kindly check explanation

Explanation:

Our environment consists of various materials, structures and resources which are so naturally interrelated, the survival of a certain species depends on the wellbeing of the other. This could be buttressed from the definition of environment which simply means the entirety of factors, naturally occurring phenomenon around us. The pollution of the air affects the oxygen we breathe in due to contamination ad thus affects the health of those who Live within the affected area. Change in climatic condition, vegetation and other phenomenon will always affect the environment since the environment itself isn't just humans being but the entirety of conditions both natural occurring and others which keeps the live and the world in existence.

i think the answer is D 10.0

Answer:

M.E = 0.241 Joules.

Explanation:

Given the following data;

Spring constant, k = 33.5 N/m

Extension, e = 0.12m

Mass = 1.20kg

To find the mechanical energy (M.E);

Mathematically, mechanical energy is given by this formula;

M.E = ½ke²

Where;

Substituting into the equation, we have;

M.E = ½*33.5*0.12²

M.E = ½*33.5*0.0144

M.E = 0.4824/2

M.E = 0.241 Joules.

25

89

105

99

I don't know. I'm sorry

Answer:

can I have please I will follow u..............

Answer:

* Temperature changes

* Changes in the tension

* Errors in the meter marks

Explanation:

When we are using several meters to make a measurement we have several aspects that can cause the readings to differ.

* Temperature changes make the dilation between readings different, at higher temperatures the material of the meter expands and the reading decreases.

* Changes in the tension with which the meter is pulled to keep it straight, in general all materials bend under the action of gravity, so you have to pull them to make them straight, if the forces are different from the material is lengthened decide Young's modulus, inducing different readings

* Errors in the meter marks, especially in the initial part that is covered by a hook, different positions of the hook change the readings.

* Structural problems, such as rust, bends that create changes in the length of the meter material.

Answer:

A.) 39.5 m

B.) 0

C.) 60m/s^2

Explanation:

Given that a displacement function of a particle is x(t)=(20t^2-15t+200).

To Find the total displacement,

Reduce everything by dividing them by 5

X(t) = 4t^2 - 3t + 40 ...... (1)

For instantaneous velocity, differentiate x(t). That is,

dy/dt = 60t - 15 ...... (2)

But dy/dt = velocity.

If dy/dt = 0, then

60t - 15 = 0

60t = 15

t = 15/60

t = 0.25s

Substitutes t in equation (1)

Total displacement will be

X(t) = 4(0.25)^2 - 3(0.25) + 40

X(t) = 0.25 - 0.75 + 40

Total displacement = 39.5 m

To calculate instantaneous velocity, substitute t into equation (2)

V = 60 (0.25) - 15

V = 0.

and to find instantaneous acceleration, differentiate dv/dt

dv/dt = 60

Therefore, acceleration = 60 m/s^2

Answer:

10880N

Explanation:

We are given that

Mass of elevator, m=850 kg

Acceleration, [tex]a=3m/s^2[/tex]

[tex]g=9.8m/s^2[/tex]

We have to find the tension in the cable.

We know that

When elevator is accelerating upward then tension in the cable

[tex]T=m(a+g)[/tex]

Using the formula

[tex]T=850(3+9.8)[/tex]

[tex]T=10880N[/tex]

Answer:

B

Explanation:

︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎

Explanation:

work=force*distance. force=load/10

___________

work=60*60=3600n

power=work/time(seconds)

Powe required is 1000

Explanation:

-Given: M= 600kg               H: 60

-Time of operation: t = 6 min = 360 seconds

-Work done in lifting boxes: w= mgh (600 x 10 x 60) = 360,000

-Power required: p=[tex]\frac{w}{t} = \frac{360000}{360} = 1000[/tex]