Answer:
Using the dilution equation, we can solve for the initial volume required. We need 18.75 mL of 2.0 M NaCl solution.
Explanation:
Which is NOT a variable in the Beer–Lambert law?
A- the path length through the sample
B- the molar extinction coefficient
C- the concentration of the sample
D- the wavelength of light
E- the absorbance of the sample
The Beer Lambert law does not take into account the wavelength of light. It claims that the sample path length and sample concentration are directly proportional to the light absorbance for a given material.
According to the following equation, the Beer Lambert law connects a solution's qualities to how much light it absorbs: A = bc, where b is the path length, c is the concentration of the absorbing species, and is the molar absorptivity of the absorbing species. The radiation is assumed to be monochromatic while deriving the law. Therefore, if bandwidth increases, divergence will result. According to the Beer-Lambert law, the characteristics of the medium through which light is moving affect how much light is attenuated.
To learn more about concentration click here https://brainly.com/question/18247103
#SPJ4
Enter the nuclear equation for the alpha decay of polonium-216 (21684Po).
Express your answer as a nuclear reaction.
Through the reaction Po Pb + ta, the Po-216 undergoes alpha decay and transforms into lead (Ph-212).
What's Po's nuclear equation?The Polish scientist Marie Curie and her husband Pierre discovered polonium in 1898, the first naturally occurring unstable element that was isolated. Po21284, Pb20882, and He42 are released when it decomposes. An oxygen isotope called 17O was the first nuclide to be created artificially.
Physical half-life for polonium-210 is 138 days. As lead-206 is produced by radioactive decay, alpha particles are released. Although the alpha particles have a relatively small range, they are quite energetic.
learn more about polonium-210
https://brainly.com/question/16979893
#SPJ4
A winery has a ton of wine. It cost the producers of the wine $ 30,481.92 to make the wine. If
the winery sells 5 oz. glasses of wine how much money does the winery need to charge to
double their money on the ton of wine?
A glass of wine costs about $12 at a pub. A 5-ounce glass of wine, or 147 mL, counts as one serving. This indicates that the typical bottle can accommodate five 5-ounce wine glasses. Ten wine glasses can fit within a magnum bottle. 20 glasses of wine fit inside a double-magnum bottle.
A tonne of wine weighs how much?A case of 12 wine bottles contains 9 litres, or 2.378 gallons, as a typical wine bottle is 750 millilitres in size. A tonne of grapes yields 150 gallons every tonne, which translates to 150/2.378 gallons each case, or just over 63 cases, of wine. We have a total of 756 bottles, 12 bottles each case.
How much wine does one ounce equal?Since 1 ounce equals slightly under 30 ml, a glass has a volume of 120 ml. A 750 ml bottle of wine will therefore yield slightly more than 6 glasses.
To know more about wine visit:
https://brainly.com/question/17547547
#SPJ1
Explain why Na could bond with F and Be could bond with Br?
Show all formulas and names of all possible molecules formed with the elements in the question above?
Na (sodium) and F (fluorine) can bond because they have different electronegativities. Electronegativity is a measure of an atom's ability to attract electrons to itself. Fluorine is one of the most electronegative elements on the periodic table, while sodium is one of the least electronegative. This creates an electrostatic attraction between the two atoms, allowing them to form a chemical bond. The bond between Na and F is called an ionic bond.
The ionic bond between Na and F is formed when the sodium atom loses one electron to form a Na+ cation, and the fluorine atom gains one electron to form a F- anion. The resulting molecule is NaF.
Be (beryllium) and Br (bromine) can bond because they also have different electronegativities. Be is less electronegative than Br, and this creates an electrostatic attraction between the two atoms, allowing them to form a chemical bond. The bond between Be and Br is called a covalent bond.
The covalent bond between Be and Br is formed when both atoms share electrons. The resulting molecule is BeBr2 (Beryllium dibromide).
In general, it's important to note that the type of bond formed between two atoms depends on their electronegativities, if they are similar they tend to form covalent bond and if they are different they tend to form ionic bonds.
Consider the decomposition of gaseous N2O4:
N2O4(g)?2NO2(g) ?H? = +55.3 kJ, ?S? = +175.7 J/K. Estimate the temperature at which the reaction becomes spontaneous.
Show work i just need to know how to calculate this, my method isnt working.
In order for gaseous N2O4 to decompose, the temperature must be lower than 314.74 K. Gas is a condition of circumstances that is neither set in size nor shape.
Compared to other material states, such as solids and liquids, gases have lower densities. There is a lot of kinetic energy in the empty space between particles. Gaseous substance has no volume and no shape, but it will expand to fill a container completely. Anything having to do with a gas or having traits of gases should be described using the term gaseous. Gaseous particles are often odourless, although you can occasionally see them. "in a gaseous condition," 1799; from gas (n.) + -ous. Gaseousness is associated. Things like oxygen, carbon dioxide, nitrogen, hydrogen, helium, steam, and dry ice are typical examples of gases.
learn more about gaseous here:
https://brainly.com/question/4594811
#SPJ4
Without decomposers, ecosystems would likely:
be home to more producers.
overflow with waste products like dung and dead leaves.
become more biodiverse.
expand and become healthier.
Without decomposers, ecosystems would likely B.overflow with waste products like dung and dead leaves.
What will happen to the ecosystem in the absence of the decomposers ?The flow of materials and energy would stop if decomposers were eliminated from a food chain. Dead organisms and waste would accumulate. Because nutrients would not be released back into the ecosystem from the waste and dead creatures, producers would not have enough nutrients.
Dead leaves, dead insects, and dead animals would accumulate everywhere if decomposers weren't present. Just picture how the world might appear! More significantly, decomposers enable the primary producers of an ecosystem, typically plants and algae, to access essential nutrients.
Therefore, option B is correct.
Learn more about ecosystems at:
https://brainly.com/question/842527
#SPJ1
use the figure to predict the results of lederberg and tatum’s experiment. (figure 1)
A. figure 1
B. figure 2
C. figure 3
According to the lederberg and tatum's experiment, the bacteria cultures will grow on minimal in flask 3.
Minimal media only supports growth of wild-type bacteria for all growth requirements. This experiment took advantage of the ease of growing and maintaining bacteria. Bacteria grow in isolated colonies on the plate. With the addition of proline, minimal media can support the growth of probacteria, but these bacteria must be wild-type for other genes. Lines 1 and 2 have additional mutations and are auxotrophs, so they do not grow under these conditions. However, when combined together in Flask 3, gene exchange may occur between these two auxotrophs, resulting in a prototroph that is wild-type for all growth requirements and capable of growth under these conditions. can be generated.
Learn more about bacteria here:
https://brainly.com/question/1537981
#SPJ4
The complete question is Use the figure to predict the results of lederberg and tatum’s experiment. (figure 1)Bacterial cultures from which flask(s) will grow on minimal medium? Select all that apply.
A. flask 1
B. flask 2
C. flask 3
The process represented by A:
The process represented by A is how producers create energy.
The correct option is A.
What are producers?Producers include all types of green plants. By absorbing sunlight and using the energy to create sugar, green plants produce their food. This sugar, also known as glucose, is used by the plant to produce a variety of materials, including wood, leaves, roots, and bark.
Producers create energy through the process of photosynthesis.
The process of photosynthesis results i the production of food in the form of glucose.
Learn more about producers at: https://brainly.com/question/22300808
#SPJ1
what is the hybridization of nitrogen in each of the following ions and molecules?
NO+2 has Linear molecule have sp hybridization, N205 has Angular molecule has sp² hybridization, NO2- has Linear molecule have sp hybridization, N2O3 has Trigonal planar molecule has sp² hybridization, N20 has Trigonal planar molecule has sp² hybridization. Linear molecule have sp hybridization.
Hybridization is a concept in chemistry that describes the way in which atomic orbitals combine to form new hybrid orbitals in molecules. Hybridization occurs when an atom's valence electron orbitals (s, p, and d orbitals) mix or "hybridize" to form new orbitals with different energy levels and electron distribution. The most prevalent hybridization types are sp3, sp2, and sp hybridization. Four atomic orbitals (one s-orbital and three p-orbitals) combine to form four sp3 hybrid orbitals in sp3 hybridization.
Learn more about Hybridization here:
https://brainly.com/question/29020053
#SPJ4
The complete question is :
what is the hybridization of nitrogen in each of the following ions and molecules?
NO+2, N2O5,NO2-,N2O3,N20
Consider the fire fighting measures shown. Why does sodium require a Class D fire extinguisher instead of one that might spray water?
A. It may create table salt, sodium chloride.
B. The sodium will react with the water, creating an acid.
C. A regular fire extinguisher might break the sodium down.
D. The sodium will react with the water, causing a flash fire.
Water reacts with the combustible substances forming more fire and flashes. That is why sodium require a class D fire extinguisher instead of spray water.
What is class D fire extinguisher ?Combustible metal fires, such as those involving aluminum, titanium, magnesium, sodium, and potassium, are classified as class D fires. These kinds of fires frequently happen in industrial, manufacturing, or laboratory environments.
When metal fines, thin metal particles, frequently produce dust during the machining process ignite and become the fuel element in the fire triangle. Class D flames are difficult to extinguish and can result in substantial damage.
A Class D fire extinguisher must always be used to put out a flammable metal fire. Smothering the fires and removing the oxygen source is the most effective approach to put out these fires. The agent also aids in absorbing the fuel's heat. Hence, option D is correct.
Find more on fire extinguisher;
https://brainly.com/question/28901632
#SPJ1
Write an equation for the reaction that occurs when aspirin is hydrolyzed in the body?
A heterodimer of PAFAH1b2 and PAFHA1b3 hydrolyzes aspirin in plasma as well as within erythrocytes in the blood (19) and in plasma. The cyclooxygenase enzymes' active site contains serine residues that aspirin binds to and acetylates.
The definition of "hydrolyzed food"The protein molecules in the diet have been chemically changed through a procedure called hydrolysis so that they can be disassembled into their simplest forms in hydrolyzed protein dog food (amino acids and peptides).
Why are proteins hydrolyzed?She explains that the hydrolyzed process converts protein into shorter-chained amino acids, promoting faster absorption and enabling faster muscle repair and rebuilding. Because hydrolyzed protein absorbs nutrients more quickly, it may help your muscles absorb BCAAs more quickly.
To know more about Hydrolyzed visit:
https://brainly.com/question/29522913
#SPJ4
Draw the missing product of the following reaction. Assume excess halogen is present.
They were given the term halogen because they all create sodium salts with comparable properties, the most well-known of which is sodium chloride, also known as table salt or halite.
The name halogen comes from the Greek roots hal- ("salt") and -gen ("to produce"). There are thorough notes on the chemical displacement reactions of chlorine, bromine, and iodine as well as descriptions of the physical characteristics of the Group 7 halogens, which include fluorine, chlorine, bromine, iodine, and astatine. Because they have seven valence electrons, halogens are special because they are very reactive. The electrons involved in chemical reactions are valence electrons, which are located in the outer shell. For the outer shell to be stable and non-reactive, it needs eight electrons.
Learn more about chemical here:
https://brainly.com/question/26487468
#SPJ4
Describe an experiment that can be used to prepare a solid sample of sodium hydrogen (3 marks) carbonate in the laboratory starting with sodium metal.
An experiment that can be used to prepare a solid sample of sodium hydrogen carbonate in the laboratory starting with sodium metal involves the following steps below:
We have to dissolve about 5 grams of anhydrous sodium carbonate in about 25 ml of distilled water in a flask.The solution has to be cooled by subjecting to a low temperature which involves keeping the flask in a freezing mixture. Carbon dioxide gas should be added to the solution.Crystals of sodium bicarbonate will precipitate out after sometime which is filtered and dried for optimal yield.What is an Experiment?This is referred to as a scientific test in which series of actions are done and their effects carefully observed in order to learn about something or make new findings.
Anhydrous sodium carbonate is dissolved in water and cooled after which carbon dioxide is passed into the solution to give crystals of sodium bicarbonate thereby making it the correct choice.
The equation for the reaction is:
Na₂CO₃ + CO₂ + H₂O →2NaHCO₃
Read more about Sodium hydrogen carbonate here https://brainly.com/question/14240995
#SPJ1
C(s) l V2+(aq), V3+(aq) ll VO2+(aq), VO2+(aq) l C(s)
Write the balanced half-reaction for the process that occurs at the anode in acidic solution.
Write the balanced half-reaction for the process that occurs at the cathode in acidic solution.
the balanced half- cell reaction for the process that occurs at the anode in acidic solution: V⁺² + H₂O → VO₂⁺ + 2H⁺ + e⁻
the balanced half- cell reaction for the process that occurs at the cathode in acidic solution: VO₂⁺ + 2H⁺ + e⁻ → V⁺² + H₂O
What is half-cell reaction?The two half-cell reaction in an electrochemical or galvanic cell is encapsulated in a shorthand form known as cell notation. With the cathode cell on the right and the anode cell on the left, these two half-cell reactions are separated by a salt bridge.
The given reaction is shown below:
C(s) l V²⁺(aq.), V³⁺(aq.) ll VO₂⁺(aq.), VO₂⁺(aq.) l C(s)
At the anode, oxidation happens, whereas at the cathode, reduction happens.
Cell notation is used to represent the reaction that is being given. The reaction occurring on the anode is written first in cell notation.
Consequently, the following describes the oxidation process occurring at the anode:
V⁺² + H₂O → VO₂⁺ + 2H⁺ + e⁻
When V undergoes an oxidation half reaction, its oxidation state shifts from +2 to +3, increasing the oxidation number. As a result, the anode is where it happens.
Similar to this, the reduction process at the cathode looks like this.
VO₂⁺ + 2H⁺ + e⁻ → V⁺² + H₂O
The following phase is adding water to balance the oxygen. The hydrogen ion is added to the reactant side in the following step to balance the hydrogen. The final stage involves employing electrons to balance the charge.
To know more about half-cell reaction refer to:
https://brainly.com/question/22946078
#SPJ4
if atoms are neutral (have no overall charge), what can you infer about the number of protons and electrons in an atom? How should these numbers compare? explain your thinking
If atoms are neutral, that means that the number of protons and electrons in an atom are equal.
What is an atom?One or more electrons are attached to the nucleus of every atom, which is made up of a nucleus. Protons and neutrons, in various numbers, make up the nucleus. Neutrons exist only in the most prevalent type of hydrogen.
Atoms that are neutral or ionized are the building blocks of all solids, liquids, gases, and plasma. A normal atom is 100 picometers across, which is incredibly small. Because of quantum effects, they are so small that it is impossible to predict their behavior with sufficient precision using classical physics, as if they were, say, tennis balls.
An atom's nucleus makes up more than 99.94% of its mass. The electric charge of the protons is positive, the charge of the electrons is negative, and there is no electric charge on the neutrons.
If atoms are neutral, that means that the number of protons and electrons in an atom are equal. This is because protons carry a positive charge, while electrons carry a negative charge. In order for an atom to be neutral, the number of protons and electrons must be the same, so that the positive and negative charges balance out. Therefore, the number of protons and electrons in an atom should be the same, and the atom is neutral.
To know more about atoms visit:
https://brainly.com/question/13654549
#SPJ1
What is the Insight's rating in kilometers per liter?
Answer:
I don't use this
Explanation:
the 5s electron in rubidium (rb) sees an effective charge of 2.771e. Calculate the ionization energy of this electron.
The 5s electron in rubidium (rb) sees an effective charge of 2.771e, then the ionization energy of this electron is -4.18 e.v.
Ionization energy: what is it?The ionization energy is a metric for an element's capacity to engage in chemical processes that call for the donation of electrons or the formation of ions. It is also generally correlated with the type of chemical bonding that occurs when elements combine to form compounds. additionally see electron affinity and binding energy.
The amount of energy required to ionise an atom is known as the ionisation energy. As we descend a group, ionisation energy falls. Crossing the periodic table from left to right, ionisation energy rises.
En = 5 = -Zeff². 13.6e.v/n²
En = 5 =( -2.771/5)²×13.6
En = 5 = -4.18 e.v
E ionization = En = 5 = -4.18 e.v.
To know more about ionization energy visit:
https://brainly.com/question/28385102
#SPJ4
Does the number of valence electrons in each atom change as you move down
each group? If yes, how does the number of valence electrons change? What is the
exception to this rule?
Because a group is established so that each member's valence shell configuration is the same, the number of valence electrons stays constant as we proceed from top to bottom in a group.
Thus, while the valence shell changes, the valence electrons remain the same.
Valence electrons are those that are found in the outermost shell of an isolated atom of an element. Since all of the elements in a group have the same valency, there is no change in the number of valence electrons as an element moves along the group.
Over each interval, the number of valence electrons falls from left to right. Within each group, the number of valence electrons rises from top to bottom. Group 9 elements have nine valence electrons in total. Group 18 contains the elements with the greatest valence electrons.
To learn more about Valence electrons from given link
https://brainly.com/question/371590
#SPJ1
Select the classification for the following reaction. KOH(aq) + HCl(aq) → KCl(aq) + H2O(1) O None of these choices is correct. O acid-base O precipitation O combination O redox
Acid-base is the classification for the following reaction. KOH(aq) + HCl(aq) → KCl(aq) + H2O(1) .
What are acids and bases?Because bases absorb hydrogen ions while acids produce them, acids and bases differ chemically from one another. Anything that counteracts acids is a basic. When bases are added to water, they break, releasing hydroxide ions, or OH-. When a base is added to water, the result is referred to as an alkaline solution. Any hydrogen-containing material that has the ability to donate a proton (hydrogen ion) to another chemical is considered an acid. A base is a molecule or ion that can take up an acid's hydrogen ion. Typically, sour tastes help to identify acidic chemicals.
When an acid and a base mix, the matching salt and water are created. An acid-base reaction is what is happening here. The neutralization reaction is another name for the acid-base reaction.
Learn more about Acid-base refer to :
brainly.com/question/9836972
#SPJ4
The K_a for hydrofluoric acid is 7.2 times 10-4. This means that HF is O a weak acid O neutral in water solution
O a strong acid O ionic O able to react with HCl
The HF is a weak acid as Kₐ for hydrofluoric acid is 7.2*10^-4.
What is weak acid?Weak acids are acids that do not dissociate entirely in solution. A weak acid, in other terms, is any acid that is not a strong acid. A weak acid's strength is determined by how much it dissociates: the more it dissociates, the stronger the acid. A strong acid is an acid that is totally ionized in water. In an aqueous solution, a weak acid is one that ionizes just minimally. Weak acids are far more prevalent than strong acids. They can be found in everyday foods such as vinegar (acetic acid) and lemon juice (citric acid).
Here,
Because the Ka for hydrofluoric acid is 7.2*10-4, HF is a weak acid.
To know more about weak acid,
https://brainly.com/question/17011616
#SPJ4
If a reaction has an equilibrium constant K < 1, is Eº positive or negative? O Eº is positive. O Eº is negative.
If a reaction has an equilibrium constant K < 1, the Eº is negative. hence Eº is negative in the following question
The equilibrium constant (K) for a reaction is a measure of the relative concentrations of reactants and products at equilibrium. The value of K is related to the standard Gibbs free energy change (ΔGº) for the reaction by the equation ΔGº = -RT ln K, where R is the gas constant and T is the temperature in Kelvin.The standard electrode potential (Eº) is a measure of the tendency of a chemical species to gain or lose electrons. The relationship between Eº and ΔGº is given by the equation ΔGº = -nF Eº, where n is the number of electrons involved in the reaction and F is the Faraday constant.
Learn more about equilibrium constant here:
https://brainly.com/question/19671384
#SPJ4
Sequence the events of the Big
Bang Theory in correct order:
Hydrogen and helium form.
Heavy elements form.
Planets form.
Stars and galaxies form.
Subatomic particles form.
The prevailing theory describes a peculiar form of energy that can suddenly push to form the nuclei of simple elements: hydrogen, helium and lithium.
what is elements?An interesting opportunity to look at the relationship that currently exists between chemists and philosophers of chemistry is the question of the conceptual nature of the term "element."The English scientist Robert Boyle was the one who first proposed the chemical element. He stated that an element is a substance that is "incapable of decomposition" and added the prophetic by any means that we are now familiar with, just like a true scientist. Boyle's definition is remarkably accurate in terms of current theory. A chemical element is a species of atoms, including the pure substance made entirely of that species, that have a specific number of protons in their nuclei. Chemical elements, in contrast to chemical compounds, cannot be reduced by any chemical reaction into simpler substances. The laboratories have changed certain components.To learn more about chemical reaction refer to:
https://brainly.com/question/11231920
#SPJ1
You purchase a rare species of plant that acquires oxygen through the solution it is placed in. Knowing that the plant will be kept outside over the scorching summer, what type of solution should the plant be placed in to assure that it receives the greatest amount of oxygen possible?
Plants produce their nourishment through a process called photosynthesis. They generate energy in the shape of glucose using water, carbon dioxide, and sunshine.
What does a high glucose level mean?Because the body doesn't produce enough insulin, hyperglycemia (increased blood glucose) occurs when there is excessive sugar in the blood. Hyperglycemia, a sign of diabetes, can lead to vomiting, intense hunger and thirst, a rapid heartbeat, eyesight issues, and other complaints.
Does glucose lead to weight gain?High blood glucose concentrations can be caused by eating more carbs than what the body can utilize. The reason for this is that the body converts carbohydrate into simple sugars. Ineffective cell removal of carbohydrates from the blood results in the body storing it as fat in the tissues. Weight gain may result from this.
To know more about glucose visit:
https://brainly.com/question/2396657
#SPJ1
Temperature and wind combine to cause heat loss. Hypothermia occurs when the body temperature falls more than 4 °F below normal. Death can occur if hypothermia persists for over 3 hours. According to the chart, in which of the following temperature and wind combinations would the body temperature be the lowest and a person most at risk for developing hypothermia?
According to the chart, the combination that would result in the lowest body temperature and highest risk of developing hypothermia would be option E: wind speed of 25 mph and a temperature of 35 °F. At this combination, the "feels like" temperature is -22 °F, which is well below the threshold for hypothermia. It is important to note that this chart only calculates the "feels like" temperature and other factors such as clothing, humidity, and overall health can also affect a person's risk of developing hypothermia
draw the products formed when the following amides are treated with water and hcl.
Hydrolysis of amide gives Carboxylic acid and ammonium salts while in base medium we get amine along with Carboxylic acid. the products formed are shown in the 1st attachment.
An amide is a functional group in organic chemistry that consists of a carbonyl group (C=O) linked to a nitrogen atom (NH2 or NH-). The general structural formula for an amide is R-C(=O)-NR' where R and R' can be any organic group. Amides are a class of compounds that have a wide range of applications in various fields, from medicine to agriculture. They are found in many natural products, such as peptides and proteins, and also in many synthetic compounds. Hydrolysis is a chemical reaction that uses water to break down a compound. The addition of a water molecule (H2O) to a substrate typically results in the separation of that substrate into two smaller molecules, one of which is a hydroxide ion (OH-). The other molecule formed in the reaction is determined by the substrate being hydrolyzed.
learn more about functional group here:
https://brainly.com/question/14618322
#SPJ4
The complete question is :
draw the products formed when the following amides are treated with water and hcl.
Piperidine (C5H11N) is an amine found in black pepper. Find Kb for piperidine in the appendix C, and then calculate Ka for the C5H11NH+ cation.
Find Ka for HOCl in the appendix C, and then calculate Kb for OCl−.
Kb for piperidine in the appendix C is 7.7⋅10 and Ka for the C5H11NH+ cation is 12.
What is cation?Positively charged ions are known as cations. Negatively charged ions are known as anions. Ions are positively or negatively charged atoms or molecules. A balanced atom will become a positively charged cation if one or more electrons are lost. A cation is an atom or molecule that is positively charged, meaning it contains more protons than electrons. Eg: Na+ 3. An anion is a negatively charged atom or molecule that has more electrons than protons. For example, a ClA cation is an ion that has lost one or more electrons, resulting in a net positive charge. An atom's cation is smaller than the neutral atom because one or more electrons are removed to make it. The following are some examples of cations: Calcium:
Here,
In Appendix C, the Kb for piperidine is 7.710, while the Ka for the C5H11NH+ cation is 12.
To know more about cation,
https://brainly.com/question/17257793
#SPJ4
Which of the following phenomena is most likely due to the high cohesiveness of water? a) Lakes and rivers freeze from the top down, not the bottom up. b) The fishing spider can walk across the surface of liquid water. c) Adding salt to snow makes it melt. d) The temperature of Santa Monica Bay, off the coast of Los Angeles, fluctuates less than the air temperature throughout the year. e) All of the above are due to the cohesiveness of water.
The fishing spider can walk across the surface of liquid water is most likely due to the high cohesiveness of water.
What is surface of liquid water?Any liquid's surface serves as the interface between it and the surrounding medium. For instance, the top surface of a pond serves as the contact between the air and the water. Surface tension, then, is a feature of the liquid's interface with another medium rather than a property of the liquid itself. Because water molecules are cohesive, surface tension can be described as the quality of a liquid's surface that permits it to resist an external force. Surface tension, which tends to minimize surface area, is the tension of a liquid's surface film brought on by the attraction of the particles in the surface layer to the bulk of the liquid.To learn more about surface refer to:
https://brainly.com/question/26122239
#SPJ4
What is the Lewis dot structure for an element that will form an ion with a charge of 3+?
For Ionic compounds, the Lewis Dot Structure must show how the electrons are being transferred to form the ions in the compound.
What is the Lewis dot structure for ions?In covalent compounds, the Lewis Dot Structures must appear how the electrons are being split to complete the octets of each atom in the molecule. hen compute the number of total valence electrons of the ionic compounds.
Lewis electron dot picture uses dots to represent valence electrons throughout an atomic symbol. Lewis electron dot diagrams for ions have fewer (for cations) or more (for anions) dots than the communicate atom. To draw the Lewis dot structures we must know the valence electrons on each atom attending in the given ionic compounds.
So we can conclude that n a covalent mixture, the Lewis Dot Structures must show how the electrons are being.
Learn more about Lewis here: https://brainly.com/question/20300458
#SPJ1
at which of the following ph values does the amino acid have the best buffering capacity?
A. 3.00
B. 1.53
C. 10.5
D. 6.01
E. 9.00
F. 2.34
The amino acid has the best capacity for a buffer at a pH of 9.69. To assess whether an aqueous solution is basic or acidic, chemists use the pH scale.
"Potential of hydrogen" is what pH stands for. The negative log base 10 of the hydronium concentration is what is referred to as pH. The pH serves as a logarithmic gauge of the concentration of hydrogen ions in a solution. On the scale, neutrality is represented by 7, and ranges from 0 to 14. While pH values above 7 denote baseness, pH values below 7 imply acidity. The pH scale really measures the concentration of free hydrogen and hydroxyl ions in water. As a result, weak bases and acids have their highest buffering capabilities at large K values.
To learn more about pH click here https://brainly.com/question/491373
#SPJ4
Which of the following does NOT occur in an ionic bond?
Two atoms share an electron.
A bond is formed between a positive and negative ion.
An electron is transferred from one atom to another.
Forms between a metal and a nonmetal element.
Answer: its the first answer
Explanation: