'Doing work' is a way of transferring energy from one object to another, energy is transferred when a force moves through a distance.
If i explain with formula
Work done (J) = Energy transferred (J)
So more energy, more work done bc u transferred more energy to move the object and doing the work. and if you only use a little of energy, the work done also only a little.
Work affect energy between objects so it can cause a change in the form of energy by transferring energy.
According to work energy theorem, the work done on an object is directly proportional to the change in the average kinetic energy of the body.
For example, a catapult used to project a stone, does a work by converting or transferring its stored elastic potential energy into kinetic energy of the flying stone.Thus, we can conclude that work affect energy between objects so it can cause a change in the form of energy by transferring energy.
Learn more here: https://brainly.com/question/10063455
Tech A says that total resistance goes up as more parallel paths are added. Tech B says that total amperage goes up as more parallel paths are added. Who is correct
Answer: Tech B says that total amperage goes up as more parallel paths are added. Who is correct
Explanation: Tech B is correct, because amperage has been known to go up through when more parallel paths are added to a circuit. this is so because when more resistors are introduced in parallel to a circuit, the resulting resistance of the circuit would decrease, this increases the total current of the circuit. as a result, when more resistors are added in parallel what you get is a change in the direction of flow which is equal to providing more branches which charge can flow through.
A substance has a mass of 15,000 kg and a volume of 30 m 3 . What is the density of the
substance?
Answer:
500 kg/m^3
Explanation:
equation ; p = m / v
m = 15,000
v = 30
p = 15,000 / 30, p = 500, add units at the end!
Hope this helps!!
A ball is rolling down a hill so that it accelerates at 3 m/s2. If it starts from rest and reaches a velocity of 9 m/s at the bottom of the hill, how long is the hill?
Answer:
13.5 m
Explanation:
Given:
v₀ = 0 m/s
v = 9 m/s
a = 3 m/s²
Find: Δx
v² = v₀² + 2aΔx
(9 m/s)² = (0 m/s)² + 2 (3 m/s²) Δx
Δx = 13.5 m
convert 0.000238 m to cm
Answer:
0.0238 centimetre
Explanation:
multiply the length value by 100
Doland is currently driving his car at 10 m/s. He sees Gooby and accelerates at 20 m/s2 for 2 seconds until he passes him to scare
him. How far did Doland drive during that time.
Answer:
[tex]60\; \rm m[/tex].
Explanation:
Refer to the velocity-time diagram attached. The displacement of an object over a period of time is equal to the area of the region between the velocity-time plot and the horizontal time axis. That is the case even if the velocity of the object is changing over time.
For the car in this question, the distance travelled in that two seconds should be equal to the trapezoid highlighted in green. That's the region bounded with:
on the top: the velocity-time function of this car, on the two sides: the start and end of the acceleration ([tex]\text{Time} = 0\; \rm s[/tex] and [tex]\text{Time} = 2\; \rm s[/tex],) as well as on the bottom: the horizontal time axis.The formula for the area of a trapezoid is:
[tex]\displaystyle \text{Trapezoid Area} = \frac{1}{2}\times \text{Height} \times (\text{Upper Base} + \text{Lower base})[/tex].
For the imaginary trapezoid on this velocity-time graph:
Height: [tex]\text{Time taken} = 2\; \rm s[/tex].Upper base and lower base: [tex]\text{Initial velocity} = 20\; \rm m \cdot s^{-1}[/tex] and [tex]\text{Final velocity} = 20\; \rm m \cdot s^{-1} + 2\; \rm s \times 20\; \rm m \cdot s^{-1} = 50\; \rm m \cdot s^{-1}[/tex].Therefore:
[tex]\begin{aligned}&\text{Displacement} \\ &= \text{Area of the imaginary trapezoid}\\ &= \frac{1}{2} \times 2\; \rm s \times \left(10\; \rm m \cdot s^{-1} + 50\; \rm m \cdot s^{-1}\right)\\ &= 60\; \rm m\end{aligned}[/tex].
What would most likely cause an accident if worn in a lab? short sleeves short hair long jewelry long pants
Answer:
Long jewelry
Explanation:
A wrench weighs 5.24 N on Earth. When it is taken to the Moon, where g = 1.60 m / s? how much does it weigh? (Hint: Its mass does not change.) (Unit = N)
Answer:
The weight of the wrench on the Moon is approximately 0.8555 N
Explanation:
On Earth, the acceleration of gravity at sea level is 9.8 m/s^2
then if the wrench weights 5.24 N that means that its mass according to Newton's second law is:
[tex]F = m \, a\\m=\frac{F}{a} \\m=\frac{5.24}{9.8} \, kg\\m=0.5347[/tex]
Now we can use the wrench's mass to find its weight on the Moon, knowing that the acceleration due to gravity there is 1.6 m/s^2:
[tex]W=m\,g\\W=(0.5347) \,(1.6) \,N\\W=0.8555\,\,N[/tex]
Answer:
Explanation:
0.8555
A 12cm candle is placed 6cm from a converging lens with a focal length of 15cm. What is the height of the image of the candle? Show all calculations and use SALT to describe the image.
Answer:
The height of the image of the candle is 20 cm.
Explanation:
Given that,
Size of the candle, h = 12 cm
Object distance from the candle, u = -6 cm
Focal length of converging lens, f = 15 cm
To find,
The height of the image of the candle.
Solution,
Firstly, we will find the image distance of the candle. Let it is equal to v. Using lens formula to find the image distance.
[tex]\dfrac{1}{f}=\dfrac{1}{v}-\dfrac{1}{u}[/tex]
v is image distance
[tex]\dfrac{1}{f}=\dfrac{1}{v}-\dfrac{1}{u}\\\\\dfrac{1}{v}=\dfrac{1}{f}+\dfrac{1}{u}\\\\\dfrac{1}{v}=\dfrac{1}{15}+\dfrac{1}{(-6)}\\\\v=-10\ cm[/tex]
If h' is the height of the image. Magnification is given by :
[tex]m=\dfrac{h'}{h}=\dfrac{v}{u}[/tex]
[tex]h'=\dfrac{vh}{u}\\\\h'=\dfrac{-10\times 12}{-6}\\\\h'=20\ cm[/tex]
So, the height of the image of the candle is 20 cm.
Engine of vehicles are manufacturers on the principle of _____
Explanation:
As the principle, a mixture gas of the fuel and the air is compressed in the cylinder at first and the gas exploded by use of an ignition plug and generate the output power
Explanation:
Engine of vehicles are manufacturers on the principle of internal combustion engine
A 8.0-cm long solenoid has 2000 turns of wire and carries a current of 5.0-A. Calculate the strength of the magnetic field at the center of the solenoid in teslas.
Answer:
B = 0.157 T
Explanation:
Given that,
Length of the solenoid, l = 8 cm = 0.08 m
Number of turns in the wire, N = 2000
Current, I = 5 A
We need to find the strength of the magnetic field at the center of the solenoid. It is given by the formula as follows :
[tex]N=\mu_o nI[/tex], N is number of turns per unit length of solenoid.
So,
[tex]B=4\pi \times 10^{-7}\times \dfrac{2000}{0.08}\times 5\\\\=0.157\ T[/tex]
So, the magnetic field at the center of the solenoid is 0.157 T.
why a flying airplane has more kin etic energy than a flying insect
Explanation:
Airplanes have more kinetic energy because their bigger. A bug is a living thing well a airplane is not so it (the airplane) has all these machines and engines to make it go faster.
What displacement do I have if I travel 10 m E, then 6 m W, then 12 m E? A. 16 m E B. 28 m E C. 28 m D. 16 m
Answer:
16m E
Explanation:
displacement=10m E-6m W+12m E=16m E
Potential energy is the energy of
Answer:
potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.
24. Compare and contrast the 'Big Bang Theory' with the 'Creation Model for the origin of the
universe.
*** Be sure to include similarities and differences between the 2 theories and information on
how and why these theories have developed over time. Use the Ven diagram on the next
page to assist you.
A light beam with wavelength 500 nm is reflected constructively from a thin layer of oil having index of refraction 1.25. The oil floats on the top of water of index of refraction 1.33. What is the minimum thickness of the layer of oil
Answer:
t = 200 nm
Explanation:
It is given that,
Wavelength of a light beam is 500 nm
It is reflected constructively from a thin layer of oil having index of refraction 1.25.
The oil floats on the top of water of index of refraction 1.33.
We need to find the minimum thickness of the layer of oil. `
For constructive interference,
[tex]\dfrac{2nt}{\lambda}=m[/tex]
m is 1 for minimum thickness
n is refractive index of oil
t is thickness of layer of oil.
So,
[tex]t=\dfrac{m\lambda}{2n}\\\\t=\dfrac{1\times 500\times 10^{-9}}{2\times 1.25}\\\\t=2\times 10^{-7}\ m\\\\t=200\ nm[/tex]
So, the minimum thickness of the layer of oil is 200 nm.
Why rolling friction less than sliding friction
The force of friction depends on the area of contact between the two surfaces. As the area of contact is less in the case of rolling than in the case of sliding that's why rolling friction is less than the sliding friction. More the contact area more the friction.
when the piston of a fountain pen with a nib is dipped into ink and and the air is released by pressing it, the ink fills in the pen. why . give reason
Answer: Please find the answer in the explanation
Explanation: According to the Newton 3rd law of motion which state that;
In every action, there will be equal and opposite reaction.
when the piston of a fountain pen with a nib is dipped into ink and and the air is released by pressing it, a force is applied which act on the molecules of the ink by pushing the molecules. When the force is released, there will be a reaction force by pulling the molecules of the ink into the pen. Thereby the ink fills in the pen.
some answer now hurry
Answer:
Hee answer is B
Explanation:
____________.
Two students are watching a person riding a skateboard up and down a ramp. Each student shares what they think about the energy of the skateboarder as they ride up and down the ramp. Elisa: I think the skateboarder has the more total energy at the top bottom of the ramp than the bottom of the ramp. Raymond: I think the skateboarder has the same total energy at all points on the ramp.
Answer:
Explanation:
We know that , If the frictional force on a system is zero , then the total energy of a system will be conserved.
By using energy conservation
KE₁ + U₁ = KE₂ + U₂
KE₁=Kinetic energy at location 1
U₁ =Potential energy at location 1
KE₂=Kinetic energy at location 2
U₂=Potential energy at location 2
Therefore, Raymond is thinking in a right way.
What volume will be occupied by 20g of Copper if the density of Copper is 9.1g/ml?
Answer:
The volume of copper is 2.198 ml
Explanation:
Given;
mass of copper, m = 20 g
density of copper, ρ = 9.1 g/ml
Density is given by;
Density = mass / volume
Volume = mass / density
Volume = (20 g) / (9.1 g/ml)
Volume = 2.198 ml
Therefore, the volume of copper is 2.198 ml
A metal sphere of radius 3cm made of brass is heated from
30°C to 100°C , Calculate the initial and final volume of the
metal sphere (Iinear expansivity of brass =0.000019k-¹ and volume of sphere =⁴/3 πr³
Answer:
Let:
r= radius= 3cm= 0.03m
∅1= initial temperature= 30°C
∅2= final temperature= 100°C
∆∅= change in temperature= ∅2 - ∅1= 70°C
L.E.= linear expansivity= 0.000019k^-1
¥= 3L.E.= volume expansivity= 3(0.000019)= 0.000057k^-1
The initial volume of the metal sphere= 4/3(πr³)
= 4/3(π×0.03³)
= 4(π×0.03²×0.01)
= 4(3.142×0.0003×0.01)
= 4(0.000009426)
= 0.000037704
= 3.7704 × 10^-5m³
¥= V2 - V1/V1∆∅
V2= ¥V1∆∅ + V1
= (1.5044 × 10^-7) + (3.7704×10^-5)
= 0.00003785
= 3.785 × 10^-5m³
Therefore, the initial and final volume of the metre sphere are 3.7704 × 10^-5 and 3.785 × 10^-5 respectively.
If you drive 125 km in 2 hours, what is your average speed
Formula: s = d/t
s = speed
d = distance
t = time
Solve using the values we were given.
s = 125/2
S = 62.5km per hour
Best of Luck!
a cannonball is fired with a speed of 76 m/s from the top of a cliff. It strikes the plane below with a speed of 89 m/s. if we neglect air friction, how high is the cliff
Assuming the cannonball is fired horizontally, its horizontal velocity stays at a constant 76 m/s. At the point it hits the ground, it has a speed of 89 m/s, so if its vertical velocity at that moment is [tex]v_y[/tex], we have
[tex]89\dfrac{\rm m}{\rm s}=\sqrt{\left(76\dfrac{\rm m}{\rm s}\right)^2+{v_y}^2}\implies{v_y}^2\approx2145\dfrac{\mathrm m^2}{\mathrm s^2}[/tex]
(taking the negative square root because we take the downward direction to be negative)
Recall that
[tex]{v_f}^2-{v_i}^2=2a\Delta x[/tex]
where [tex]v_i[/tex] and [tex]v_f[/tex] are the initial and final velocities, respectively; [tex]a[/tex] is the acceleration; and [tex]\Delta x[/tex] is the change in position of a body. In the cannonball's case, it starts with 0 vertical velocity and is subject to a downward acceleration with magnitude [tex]g=9.80\frac{\rm m}{\mathrm s^2}[/tex]. So we have
[tex]2145\dfrac{\mathrm m^2}{\mathrm s^2}-0=-2g\Delta y\implies\Delta y\approx-109.44\,\mathrm m[/tex]
(which is negative because we take the cannonball's starting position at the top of the cliff to be the origin) so the cliff is about 109 m high.
What was the initial velocity of a robot that took 5 m to get to final velocity of 19 m/s at a rate of 3 m/s/s?
Answer:
4m/s
v=u+at
19=u+3*5
u=4m/s
zeros are always considered significant digits when they are to the left of the decimal point True or False
Answer:
false
Explanation:
because they does'nt Work for anything, are like they are not there
Answer:
False
Explanation:
The rules for significant figures are:
Non-zero digits are always significant.Zeros between significant digits are also significant.Trailing zeros are significant only after a decimal point.A zero before a decimal point is only significant if there's a non-zero digit before it.
For example, in the number 10.5, the zero is significant, because it is between significant digits.
But in the number 0.5, the zero is not significant.
The moon Umbriel orbits Uranus (mass = 8.68 x 1025 kg) at a distance of 2.66 x 108 m. What is Umbriel's orbital speed?
Answer:
the orbital speed of umbriel is 16,800 km/h
Explanation:
The computation of the orbital speed is shown below
According to the question the Data provided in the question
Uranus mass = 8.68 × 10^25 kg
Distance = 2.66 × 10^8 m
Based on the above information, the orbital speed of Umbriel is
[tex]V = \sqrt{\frac{GM}{R} } \\\\ = \sqrt{\frac{((6.673e-11)(8.68e25)}{2.66e8} }[/tex]
V = 4666 m/s
= 16,800 km/h
Hence, the orbital speed of umbriel is 16,800 km/h
Therefore it can be calculated by applying the above formula
Answer: 4665
Explanation: I got it right after on acellus
what are the abuses limitation and benefits of science (pls tell at least 5 each)
Answer: The generation of electricity using fossil fuels.e.g can lead to pollution which cause harm to human beings and environment.
At some times science and technology have been misused or abused by human beings.An example of abuse is the invention of and use of deadly weapons which are harmful to us and environment.
Explanation:
which solid state component allows a mobile phone to store data even if the battery is removed
Answer:
Capacitor
Explanation:
Capacitor ; A capacitor is a passive two-terminal electrical component that can store energy in an electric field electrostatically. It works as a small rechargeable battery that stores electricity. However, unlike a battery, it can charge and discharge in the split of a second. Capacitors are widely used to build different types of electronic circuits.
12. Prove that v' = u? + 2as.
Prove that v² = u² + 2as .
Solution:-From first equation of motion,
v = u + at
=> at = v - u
=> t = v - u / a
From the second equation of motion, we have
s = ut + 1/2at²
Putting the value of t in above equation , we get:
s = u ( v - u /a ) + 1/2 a ( v - u/a )²
s = uv - u² / a + a( v² + u² - 2uv / 2a²)
s = uv - u² / a + v² + u² - 2uv / 2a
s = 2uv - 2u² + v² + u² - 2uv / 2a
2as = v² - u²
Answer:
[tex] \boxed{ \boxed{ \orange{ \sf{see \: below}}}} [/tex]
Explanation:
[tex] { \underline{ \underline \bold{ \sf{ \blue{ {question \: }}}}}}[/tex]
[tex] \sf{ \bold{ \underline{ \: prove \: that \: {v}^{2} = {u}^{2} + 2as}}}[/tex]
[tex] \underline{ \underline{ { \bold{ \sf{ \purple{solution} }}}}}[/tex]
Let us assume a body moving with an initial velocity ' u '. Let it's final velocity be 'v' after a time 't' and the distance travelled by the body be 's'. We already have ,
[tex] \sf{v = u + at}[/tex] ⇒first equation of motion ( i )
[tex] \sf{s = \frac{u + v}{2} \times t}[/tex] ⇒second equation of motion ( ii )
Putting the value of t from ( i ) in the equation ( ii )
{ v = u + at
or , at = v - u
or, t = v-u / a }
[tex] \sf{s = \frac{u + v}{2} \times \frac{v - u}{a} }[/tex]
[tex] \sf{or \: s = \frac{ {v}^{2} - {u}^{2} }{2a} }[/tex]
[tex] \sf{or \: 2as = {v}^{2} - {u}^{2} }[/tex]
[tex] \sf{ \boxed{ \bold{ \: ∴ \: \: \: {v}^{2} = {u}^{2} + 2as}}}[/tex] ⇒ forth equation of motion
Hope I helped!
Best regards!!
A physics student throws a ball straight up. The student catches the ball in exactly the same place from which it was released. The ball’s time of flight is T, and its maximum height above its release point is H. Neglect air resistance and assume up is the positive direction. Find the ball’s average velocity during the second half of its trip. (Hint: Your answer should only have the variables H and T in it.)
Answer:
The correct answer is H ÷ ¹/₂T
Explanation:
The formula for velocity is distance covered ÷ time.
Neglecting air resistance;
If the ball's time of overall time flight is T, the time it will take for the second half/return trip is ¹/₂T.
If the ball's maximum height above its released point is H, the height will also be the distance it covered for the second part of the trip since the student caught the ball in the exact same place the ball was thrown. Hence, the distance for the second half of the trip will be H.
Since velocity = distance/time
The average velocity during the second half of the trip will be = H ÷ ¹/₂T