help help help please please​

Answer:

A resistor has the ability to reduce voltage and current when used in a circuit. The main function of a resistor is to limit current flow.

Explanation:

I this what you were looking for?

Answer:

I = 0.2 A

Explanation:

Lamp is rated at 300 mA

I_lamp = 0.3 A

Voltage is; V = 3V

Thus; Resistance is given by;

R = V/I

R = 3/0.3

R = 10 ohms

Now, since the ammeter of 5 ohms is connected in series with the lamp. Thus equivalent resistance;

R_eq = 10 + 5

R_eq = 15 ohms

Ammeter current will be;

I = V/R_eq

I = 3/15

I = 0.2 A

The molecules making up object collide with the molecules of the other and some of the kinetic energy from a warmer object is transferred to the cooler one.

Answer:

The correct answer is - distress.

Explanation:

Eustress is a type of stress that is beneficial to person and caused by adrenaline. Hypostress is a stress that is caused due to boredom or no work. It is stress comes with wasting the time.

Distress is the bad stress caused by anxiety, sadness, grief, and such type of stress that is caused irritability. Irritability is caused not just by stress but many factors.

Answer:

The package should be dropped 244.7 meters before the target

Explanation:

We need to find how long the package will take to hit the ground then solve for position.

y=0

-4.9t^2=-3000

t= sqrt (3000/4.9)

t= 24.74 seconds.

x= 247.4 meters.

Answer:

the third one T-W

Explanation:

the direction of the Tension and weight are opposite

Answer:

Firstly, science helps our understanding of the world around us. Everything we know about the universe, from how trees reproduce to what an atom is made up of, is the result of scientific research and experiment.

Scientists use the scientific method to collect measurable, experimental evidence in an experiment related to a term (often in the form of an if/then statement), the results aiming to support or differ a theory. In other words, scientific method helps scientists get accurate, repeatable results.

Answer:

Distancia, S = 136 metros

Explanation:

Dados los siguientes datos;

Aceleración, a = 3 m/s²

Velocidad inicial, u = 5 m/s

Tiempo, t = 8 segundos

Para encontrar la distancia recorrida, usaríamos la segunda ecuación de movimiento;

S = ut + ½at² Sustituyendo en la fórmula, tenemos;

S = 5 × 8 + ½ × 3 × 8²

S = 40 + 1,5 × 64

S = 40 + 96

Distancia, S = 136 metros

Answer:

Mechanical waves are A. Longitudinal and C. Transverse.

Explanation:

I hope this helps you.^_^

Answer:

Weight = 160 N

Explanation:

The weight of an object is a measure of the gravitational force on the object. So that weight is synonymous to the force applied by the object.

i.e Weight = mass x gravitational force

Also, the pressure of an object is the ratio of its force to area covered by the object. So that;

P = [tex]\frac{F}{A}[/tex]

Given that: area = 4 [tex]cm^{2}[/tex] (0.0004 [tex]m^{2}[/tex]), and pressure = 100 000 N[tex]m^{-2}[/tex].

Then;

F = PA

  = 100 000 N[tex]m^{-2}[/tex] x 0.0004 [tex]m^{2}[/tex]

F = 40 N

The force applied on the ground by each of the four tyres of the car is 40 N.

Thus, the weight of the car = 4 x 40 N

                                     = 160 N

Answer:

equilibrium

Explanation:

acceleration will remain constant

Answer:

I would not feel fear because I haven't had the physiological arousal necessary to induce that emotional state.

Explanation:

The James-Lange theory is a theory of emotions. According to the James-Lange theory, the emotions of a human occur as a result of the physiological reactions to the surrounding events. His theory is one of the well known psychological theories of emotions.

In the context, I took a medicine that prevented the activation of my sympathetic nervous system and imagined a venomous snake that crawls up my leg, I did not feel any fear as I have not had the emotion or the phycological arousal that is necessary to induce the emotional state. It is according the theory of James-Lange.

A group of two or more atoms.

Answer:

n sei

Explanation:

n seei

Answer:

i relly need help with points it  whould help if you make me brainliest

Explanation:

Hi, you did not enter the text about the Suarez family, which makes it impossible for this question to be answered accurately. However, from the context of your question, it is possible to see that you want to know two positive and negative points that the Suarez family would observe when starting a planting of organic agriculture.

Among the negative points, we can say that organic agriculture has a high cost, as the techniques used in it require a greater number of resources, which can make not only the service more expensive, but also the product. A second negative point is that the techniques used in organic agriculture are more difficult than the techniques used in conventional agriculture, since all management of organic crops must be carried out without the application of chemical products.

Among the positive points, we can say that the growing number of consumers of organic products can increase the profit that the family will have from the sale of these products. In addition, the family will have healthier, less polluted and more productive land.

Answer:

Sample response: Organic farming would have higher costs, and would be more complex than conventional farming. However, the Suarez family could charge a higher price for organic produce. This type of farming also would be better for the land.

Explanation:

Answer:

The total displacement of the car is 250 km.

Explanation:

Given that,

A car at a position 150 km [W] of Toronto travels to a position 400 km [W] of  Toronto.

Total displacement = final position - initial position

= 400 km - 150 km

= 250 km

So, the total displacement of the car is 250 km.

Explanation:

Hydraulic Pressure-Control, On-Off Deluge Valve

FP-400Y-5DC

The BERMAD model 400Y-5DC is an elastomeric, hydraulic line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-5DC is activated by a hydraulically operated relay valve, through which opening and closing of the valve can be controlled either with a remote hydraulic command or with a wet pilot line with closed fusible plugs. An integral pressure reducing pilot valve ensures a precise, stable, pre-set downstream water pressure. The optional valve position indicator can include a limit switch suitable for Fire & Gas monitoring systems. The 400Y-5DC is ideal for systems that combine a remote wet pilot line with a high pressure water supply.

Answer:

Explanation:

The PE equation for a mass/spring system is

[tex]PE=\frac{1}{2}k[/tex]Δx² and filling in:

[tex]130=\frac{1}{2}k(.10)^2[/tex] and

[tex]k=\frac{2(130)}{(.10)^2}[/tex] so

k = 26000 N/m

If the displacement from equilibrium changes more, the PE needed to compress it will also change.

[tex]PE=\frac{1}{2}(26000)(.20)^2[/tex] gives us that

PE = 520J

Answer:

d= 637323 meters

t= 360.5 seconds

Answer:

Explanation:

Since the height from which the shell was fired is the same as the height at which it lands (on the ground, to be specific), we will use the range equation. That is the only time you CAN use the range equation (when the initial height and the final height are exactly the same). The range equation is:

[tex]r=\frac{v_0^2sin(2\theta)}{g}[/tex] where v0 is the initial velocity, theta is the angle, and g is the pull of gravity (NOT negative). Filling in:

[tex]r=\frac{(1500)^2sin(9.0*10^1)}{9.8}[/tex] so, doing all that math gives us:

r = 6.4 × 10⁵ meters

Answer:

B

Explanation:

Answer:

a) Watt is a derived unit because it's not a “base unit.”

b) The atomic clock is suitable for measuring time because natural atomic oscillations happen at a higher frequency and as a result they are more stable.

c) There is fluctuation in time measured by a pendulum clock because the pendulum rod changes in length slightly with changes in temperature, causing changes in the rate of the clock. An increase in temperature causes the rod to expand, making the pendulum longer, so its period increases and the clock loses time.

D) The weight of an object is more at pole and less at equator of the earth because the distance of the pole is less than the distance of the equator from the centre of the earth.

e) The weight of an object on the moon is about one-sixth the weight it would have on the earth because the moon's gravitation force is determined by the mass and the size of the moon. Hence, the weight of an object on the moon is 1/6th its weight on the earth.

Answer:

The number of turns in the second coil is more than the coil 1.

Explanation:

The magnetic field lines are the imaginary path on which an isolated north pole moves if it is free to do so.

The tangent at any point to the magnetic field line, gives the direction of magnetic field at that point.

More be the crowd ness of magnetic field lines more is the strength of magnetic field.

Here the crowd ness of magnetic field lines is more in figure 2 , so the magnetic filed in figure 2 is more than 1. It shows that the number of turns in the second coil is more than the 1 and also the current in the coil 2 is more than 1 .

Answer:

Coulomb, unit of electric charge in the metre- kilogram- second- ampere system, the basis of SI system of physics unit. The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.

Answer:

A. The size of the ice patches

Explanation:

In an experiment, the control variable also known as the CONSTANT is the variable that must be kept uniform or the same for all groups throughout the experiment in order not to influence the outcome of the experiment.

According to the experiment described in this question, the effect of different salts on melting points is investigated by a student. Sodium chloride (NaCl), Calcium Chloride (CaCl2), Potassium Carbonate (KCO3) and inert sand are the four types of salt used. The volume of the ice used and melted was finally measured. This means that the SIZE OF THE ICE PATCHES USED is the control variable of the experiment as the same size was used for all groups throughout.

Answer:

the size of the ice patches

Explanation:

Answer:

the car’s final displacement is 60 m

Explanation:

Given;

initail velocity of the car, u = 0

acceleration of the car, a = 0.8 m/s²

time of motion, t = 10 s

The first displacement of the car:

[tex]x_1 = ut + \frac{1}{2} at^2\\\\x_1 = 0 + \frac{1}{2} (0.8)(10)^2\\\\x_1 = 40 \ m[/tex]

The second displacement of the car;

acceleration, a = 0.4 m/s²,   time of motion, t = 10 s

[tex]x_2 = ut + \frac{1}{2} at^2\\\\x_2 = 0 + \frac{1}{2} (0.4)(10)^2\\\\x_2 = 20 \ m[/tex]

The final displacement of the car;

x = x₁  +  x₂

x = 40 m  +  20 m

x = 60 m

Therefore, the car’s final displacement is 60 m

Answer:6.26*10^-4

Explanation:

The magnetic flux through the loop is 6.255 x 10⁻⁴ Weber.

The number of magnetic field lines passing through a cross-section area defines the magnetic flux. It is denoted by ∅.

∅ = BAcosθ

Given is the magnetic field B = 0.152T, radius r = 0.04m and the angle of orientation θ=35.0 degrees

Area of cross- section A = πr² = 3.14 x ( 0.04)² = 5.024 x 10⁻³ m²

Magnetic flux, ∅ =  0.152 x  5.024 x 10⁻³ x cos 35°

∅ = 6.255 x 10⁻⁴ Weber

Thus, the magnetic flux through the loop is 6.255 x 10⁻⁴ Weber.

Learn more about magnetic flux.

https://brainly.com/question/24214683

#SPJ2

Answer:

A

Explanation:

The first thing you have to do is go back and list the resistances correctly. R1 = 20 R2 = 30 and R3 = 10.

Leave the units off if you can't make an omega.

The resistance of a series circuit (that's what this is) is r1 + r2 + r3 = 10 + 20 + 30 = 60 ohms

Now use ohms law.

R = 60 ohms

V = 110 volts.

I = V / R

I = 110/60

I = 1.833 to the nearest 1/10 = 1.8

Answer:

you are kind of better than I am I don't read much but with brainly I will be intelligent