Answer:
F = 0.414 N
Explanation:
Given that,
Magnetic flux density,[tex]B=3.6\times 10^{-2}\ T[/tex]
The length of the wire, l = 24 m
Current, I = 0.48 A
We need to find the force acting on the wire. The formula for the force is given by:
[tex]F=ILB[/tex]
Put all the values,
[tex]F=0.48\times 24\times 3.6\times 10^{-2}\\\\F=0.414\ N[/tex]
So, the force acting on the copper wire is equal to 0.414 N.
The magnetic force of the copper wire is 41.472 N.
Magnetic force of the copper wire
The magnetic force of the copper wire is calculated by applying the following equation.
F = BIL x sinθ
Where;
θ is the inclination of the magnetic fieldI is the currentL is the length of the wireB is the magnetic field strength = flux densityF = (3.6 x 10⁻²) x (48) x 24 x sin(90)
F = 41.472 N
Thus, the magnetic force of the copper wire is 41.472 N.
Learn more about magnetic force here: https://brainly.com/question/13277365
[tex]what \: is \: reflection \: of \: light \: \: \: \: {?}[/tex]
integrated science please help
Answer:
As we all knows that Matter is everything that occupies in space.
(A) There are three major types of Matter;
SolidGasLiquid(B) (I) If John took five ice cubes from the freezer and place them into a cup after 5 minutes, he returned and saw water this process is called melting.
(ii) if he put the same cup into the freezer and turned into ice in 5 minutes this
process is called freezing.
(iii) if John places the ice from the cup into a pot on a lit stove for 2 minutes and leaves, and he returned and find the pot empty this process is called evaporation.
What is the net force on a remote controlled airplane if a force of 57.6N is applied West and a force of 95.7N is applied South?
Answer:
112 N at 239°
Explanation:
Applying,
Pythagoras theorem,
a² = b²+c².................. Equation 1
Where a = net force
From the question,
Given: b = 57.6 N, c = 95.7 N
Substitute into equation 1
a² = 57.6²+95.7²
a² = 3317.76+9158.49
a² = 12476.25
a = √12476.25
a = 111.7 N
a ≈ 112 N
Then the direction is given as
∅ = tan⁻¹(c/b)........... Equation 2
∅ = tan⁻¹(95.7/57.6)
∅ = tan⁻¹(1.66)
∅ = 58.9°
∅ ≈ 59°
Since the angle is in the third quadrant,
∅' = 59+180
∅ = 239°
Hence the right answer is
112 N at 239°
A cannon sitting on level ground is aimed at 45.0 degrees relative to the horizontal. It fires a test shot at a target located 100.0 meters away from the cannon on the same level ground. The test overshoots the target by 20.0 meters. Which of the following angles can the cannon be adjusted to to hit the target. You may neglect air resistance and assume the cannon always delivers the same initial velocity to the cannonball .
A. 35.9 deg
B. 49.1 deg
C. 28.2 deg
D. 52.8 deg
E. 22.7 deg
Answer:
C. 28.2 deg
Explanation:
The horizontal range of a projectile is given as:
[tex]R = \frac{v^2Sin2\theta}{g}[/tex]
where,
R = Range
v = speed
θ = angle of launch
g = acceleration due to gravity = 9.81 m/s²
First, we will find the launch speed (v) by using the initial conditions:
R = 120 m
θ = 45°
Therefore,
[tex]120\ m = \frac{v^2Sin 90^o}{9.81\ m/s^2}\\\\v = \sqrt{(120\ m)(9.81\ m/s^2)}\\\\v = 34.31\ m/s[/tex]
Now, consider the second scenario to hit the target:
R = 100 m
Therefore,
[tex]100\ m = \frac{(34.31\ m/s)^2Sin2\theta}{9.81\ m/s^2}\\\\Sin2\theta = \frac{(100\ m)(9.81\ m/s^2)}{(34.31\ m/s)^2}\\\\2\theta = Sin^{-1}(0.833)\\\\\theta = \frac{56.44^o}{2}\\\theta = 28.22^o[/tex]
Hence, the correct option is:
C. 28.2 deg
Atoms contain both positive nuclei and a negative electron cloud. Which of the following would cause an attraction between two atoms?
A. The nucleus of one atom and the electron cloud another atom
B.The nucleus of one atom and the nucleus of another atom
C. The electron cloud of one atom and the electron cloud of another atom
D.None of these would cause an attraction between atoms
Answer:
Option (D)
Explanation:
A. The nucleus of one atom and the electron cloud of the another atom will not the cause of attraction.
B. The nucleus of one atom and the other atom will not cause the attraction.
C. The electron cloud of one atom and the electron cloud of the another will not cause attraction.
D. So, this option is correct.
Explain how two rolling bowling balls of different masses can have the same momentum
Knowing that the momentum(p) of an object is directly (when one number goes up the other will too) related to both the mass and velocity of an object or p=mv, two rolling bowling balls of different masses can have the same momentum because the one with the lower mass, has a higher velocity. The higher velocity of an object would make up for the lower mass and vice versa.
Answer:
Sample Response: Momentum is equal to the mass of an object multiplied by the velocity of an object. The two bowling balls can have the same momentum if the bowling ball with less mass has a higher velocity, and vice versa. As long as the product of the mass and velocity of one bowling ball is equal to the product of the mass and velocity of the other, the bowling balls will have the same momentum.
Explanation:
explain the role of standard units to bring uniformity in the measurement
Answer:
We need standard unit for measurement to make our judgement more reliable and accurate. For proper dealing, measurement should be same for everybody. Thus there should be uniformity in measurement. For the sake of uniformity we need a common set of units of measurement, which are called standard units.
Why would researchers not be allowed to recreate the Little Albert experiment today?
Answer:
Explanation:
En la historia de la ciencia se han dado auténticas barbaridades. Pruebas con animales que hoy no perdonaría nadie, o investigaciones de conducta con personas como la de la cárcel de Stanford, que se han saldado como una especie de pasado incómodo sobre los límites de la experimentación. Sin embargo, pocos se pueden acercar por su carácter perturbador al denominado experimento de Little Albert o Pequeño Albert: El salvaje intento por probar con un bebé que las fobias pueden ser condicionadas y aprendidas. Y lo que es peor, conseguirlo.
Esta idea surgió de la mente de John Broadus Watson, reconocido padre de la rama conductista de la psicología, que desde 1913 había comenzado a probar en animales sus tesis. Estas bebían directamente del los estudios de Iván Pavlov, fisiólogo ruso que ganó el Nobel en 1904 por sus estudios sobre el sistema digestivo, pero que también sentó precedentes sobre la psicología.
link por si te interesa:
https://hipertextual.com/2017/10/pequeno-albert
Answer this physics question ASAP. please
Answer:
Explanation:
After much working on this, I got the force between A and C to be 12 and the force between B and C to be 9. the total force I found then was 15 N at 53 degrees. I used the angle between A and C as 90 degrees and the angle between B and C to be 0 )I just rotated the right triangle a bit to make it easier to work with).
what is good operating practice concerning the use of aircraft lighting while on the ground at night
Answer:
It is important to be extra careful at night and in periods of low visibility from sunset to sunrise and to focus on operating the aircraft safely when the aircraft is moving. Ensure checklist are run through and avoid non essential communications prior to the aircraft being stopped and the breaks are set
Explanation:
According to aircraft rules and regulation, the position lights of an aircraft are required to be switched on on an aircraft which is either operated on the surface and during flight from sunset to sunrise or when the elevation of the Sun below the horizon is more than 6°
However, the anti collision lights are not required to be lighted during night operations, unless the pilot in command specifies it for safety reasons
Juanita ran one mile around her school track in six minutes. What is
her average speed, and what is the magnitude of her average velocity?
10 mph, 0 mph
6 mph, 0 mph
6 mph, 6 mph
10 mph, 10 mph
Answer:
The correct option is a) 10 mph, 0 mph.
Explanation:
1. The average speed (S) is a magnitude given by:
[tex] S = \frac{D}{T} [/tex]
Where:
D: is the total distance = 1 mi
T: is the total time = 6 min
[tex] S = \frac{D}{T} = \frac{1 mi}{6 min}*\frac{60 min}{1 h} = 10 mph [/tex]
Hence, the average speed is 10 mph.
2. The average velocity is a vector:
[tex] V = \frac{\Delta d}{\Delta t} = \frac{d_{f} - d_{i}}{t_{f} - t_{i}} [/tex]
Where:
[tex]d_{f}[/tex]: is the final distance
[tex]d_{i}[/tex]: is the initial distance
[tex]t_{f}[/tex]: is the final time
[tex]t_{i}[/tex]: is the initial time
Since Juanita ran one mile around her school track, the final position is the same that the initial position, so the magnitude of the average velocity is zero.
Therefore, the correct option is a) 10 mph, 0 mph.
I hope it helps you!
An airplane flies eastward and always accelerates at a constant rate. At one position along its path, it has a velocity of 32.7 m/s . It then flies a further distance of 48500 m , and afterwards, its velocity is 44.7 m/s . Find the airplane's acceleration.
Answer:
[tex]\quad[/tex]0.0095 m/s²
Explanation:
We have,
Initial velocity (u) = 32.7 m/sFinal velocity (v) = 44.7 m/sDistance travelled (s) = 48500 mWe are asked to calculate the airplane's acceleration.
By using the third equation of motion,
➝ v² - u² = 2as
v denotes final velocityu denotes initial velocitya denotes accelerations denotes distance➝ (44.7)² - (32.7)² = 2 × a × 48500
➝ 1998.09 - 1069.29 = 97000 × a
➝ 928.8 = 97000a
➝ 928.8 ÷ 97000 = a
➝ 0.0095 m/s² = a
a ball is launched upward at an angle from the ground. which way does its acceleration point at the top?
For a ball that is launched upward at an angle from the ground, the direction of its acceleration at the top of the projectile curve is downwards.
Acceleration of the ball at the topAs the ball is projected upward its acceleration points upwards until the ball reaches the maximum height or top of the projectile path.
At the top of the projectile path, its acceleration start pointing downwards.
Thus, for a ball that is launched upward at an angle from the ground, the direction of its acceleration at the top of the projectile curve is downwards.
Learn more about downward acceleration here: https://brainly.com/question/22048837
#SPJ1
Answer:
vertical
Explanation:
An instrument rated pilot is planning a flight under IFR on July 10, this year. Before conducting the flight, the pilot must have
Answer: See explanation
Explanation:
From the information given, we are informed that an instrument rated pilot is planning a flight under IFR on July 10, this year.
It should be noted that before conducting the flight, the pilot must have performed and logged the prescribed tasks and repetitions that are required for instrument currency no earlier than January, 10 for the year.
Let's first consider the dynamics behind the motion in this video. After the student releases the wheel by cutting the cord, what forces are acting on the wheel
Answer:
Hello. You did not provide the video to which the question refers, however, given the context of your question, we can consider that the forces acting on the wheel are the weight of the wheel, the tension that this weight promotes on the rope and the normal force of the axle.
Explanation:
According to the context of the question, we can see that the wheel is being pulled by a rope. The weight of the wheel is the first force that acts on it, promoting resistance to the impulse that the rope promotes on the wheel. When this wheel is pulled by the rope, the weight of the wheel creates tension in the rope, which stretches and becomes tensioned in response to this force. However, this tension is also a force acting on the wheel, as is the normal force on the axis between these two elements.
What is the colour of a shirt which has blue and white stripes when put under yellow light? Explain.
Answer:
Black and yellow strips.
Explanation:
Color of shirt is blue and white stripes
When the shirt is seen in the yellow light, the blue color do not reflect any color so it appears black and the white color reflects the yellow light so it appears yellow.
Thus, the color of shirt is blue appears black and white appears yellow.
The work function for silver is 4.73 eV. (a) Convert the value of the work function from electron volts to joules.
Answer:
[tex]W=7.56\times 10^{-19}\ J[/tex]
Explanation:
Given that,
The work function for silver is 4.73 eV.
We need to find the value of the work function from electron volts to joules.
We know that,
[tex]1\ eV=1.6\times 10^{-19}\ J[/tex]
For 4.73 eV,
[tex]4.73\ eV=1.6\times 10^{-19}\times 4.73\\\\=7.56\times 10^{-19}\ J[/tex]
So, the work function for silver is [tex]7.56\times 10^{-19}\ J[/tex].
effects of gravitational force
Answer:
The force that propels a toddler down a slide. The force that causes the moon to revolve around the Earth. The force that keeps Jupiter's moons located around the planet. The force from the moon that causes the tides of the ocean.
Explanation:
Explain how you can use the factors of production to produce a fruit juice in a production company
Answer:
The factors of production include Land, Labour, Capital and Enterpreneurship
Explanation:
The fruit could be apple, orange , pineapple etc which are usually grown on land . They are tended to by people to ensure there is maximum yield. These people provide the required labour needed.
The cost of planting and payment of workers usually comes from the capital which is often used in running the business by the owner which makes certain decisions to ensure the fruit company is in place. All these factors work hand in hand to ensure production of fruit in a production company is possible.
ive an example of a pair of variables that have negative correlation. A. The quantity of fertilizers used and crop yield. B. The color of a person's shirt and the number of meals sold at Chinese restaurants. C. The number of physicists and the speed of sound. D. The number of winter coats sold and the temperature outside.
Answer:
D. The number of winter coats sold and the temperature outside.
Explanation:
A negative correlation can be described as a relationship existing between two variables such that as one of these variables goes up, the other variable would go down and vice versa.
With this explanation in mind, as the temperature outside increases, less winter coats would be sold because an increase in temperature would mean more heat and hotness. People would be uncomfortable wearing thick clothing.
What is seafloor spreading
A. The formation of new ocean crust when plates spread apart
B. The movement of a continent over time
C. The movement of a tectonic plate under another plate
D. The destruction of underwater mountains by plates
Answer:
A
Explanation:
The process by which molten materials add new oceanic crust to the ocean floor.
The electric potential energy of an electric dipole is ______ when the dipole is aligned with an electric field. The electric potential energy of an electric dipole is ______ when the dipole is aligned with an electric field. most positive most negative zero infinite undefined
Answer:
Most negative
Explanation:
The electric potential energy of a dipole U = -pEcosθ where p = dipole moment, E = electric field and θ = angle between p and E.
When the electric dipole is aligned with the electric field, the angle between p and E is 0°. That is θ = 0°.
So, U = -pEcosθ
U = -pEcos0°
U = -pE
which is the most negative value it can have.
So, the electric potential energy of an electric dipole is most negative when the dipole is aligned with an electric field.
So, most negative is the answer.
Mike is serving the volleyball for the second time in a volleyball game. If the ball leaves his hand with twice the velocity it had on the first serve, its horizontal range R would be:
Answer:
His new horizontal range is 4 times his initial range.
Explanation:
Since Mike serves the ball with velocity, u, his horizontal range is
R = u²sin2Ф/g where Ф is the angle between u and the horizontal.
Now, if on his second serve, the ball leaves his hand with twice the velocity of his initial serve, the new velocity is v = 2u.
So, the new range R' = v²sin2Ф/g
R' = (2u)²sin2Ф/g
R' = 4u²sin2Ф/g
Since R = u²sin2Ф/g,
R' = 4u²sin2Ф/g
R' = 4R
So, his new horizontal range is 4 times his initial range.
Mean diameter of cylinder measured by A is 2.50 cm with a possible error of 0.25 cm whereas mean height of cylinder measured by B is 10.0 cm with a possible error of 0.5 cm. Whose measurement is more accurate?
Answer:
The measurement of first cylinder is more accurate.(A)
Explanation:
The least possible error higher will be accuracy.
please help.. i got it wrong on my last attempt
Answer:
The answer is C.
Explanation:
What must be the reaction force when someone hits a tree with an axe?
Answer: The correct option is that the axe handle applying a force to the person's hand.
Explanation:
This reaction force is due to Newton's third law of motion. This law states that for every action there is equal and opposite reaction to it. This implies that when a force is being exerted on a surface, the surface must exert a force that is equal and opposite in direction to the exerting force. This law represents a certain symmetry in nature that forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself.
A typical example of Newton's third law includes:
--> When you hit a tree with an axe: with your hand you exert a force on the tree with the intention to cut it down(action force). The same force you excreted on the tree would be felt in your hands (reaction force).
--> when air rushes out of a balloon: when air escapes for a balloon, the opposite reaction is that the balloon flies up.
How much current flows in the circuit if two resistors of 6 connected in parallel are
supplied with potential difference of 12 volts?
Answer:
4 A
Explanation:
Firstly we need to calculate the equivalent resistance. Since, two resistors of 6 connected in parallel, so equivalent resistance will be given by,
[tex]\longrightarrow[/tex] 1/R = 1/R1 + 1/R2
[tex]\longrightarrow[/tex] 1/R = (1/6 + 1/6) Ω
[tex]\longrightarrow[/tex] 1/R = (1 + 1)/6 Ω
[tex]\longrightarrow[/tex] 1/R = 2/6 Ω
[tex]\longrightarrow[/tex] R = 6/2 Ω
[tex]\longrightarrow[/tex] R = 3 Ω
We know that,
[tex]\longrightarrow[/tex] V = IR
V denotes p.d (12V)I denotes currentR denotes resistance (3 Ω)[tex]\longrightarrow[/tex] 12 = I × 3
[tex]\longrightarrow[/tex] 12 ÷ 3 = I
[tex]\longrightarrow[/tex] 4 Ampere = I
During an Apollo lunar landing mission, the command module continued to orbit the Moon at an altitude of about 112 km . How long did it take to go around the Moon once?
Express your answer using three significant figures and include the appropriate units.
T=2 Hours 6 Minutes 33.53 Seconds
A small car increases its speed from 10 m/s to 15 m/s. Its mass is 1,200 kg. What is the impulse?
A. 6,000 kg-m/s
B. 18,000 kg-m/s
C. 12,000 kg.m/s
D. 1,200 kg-m/s
Answer:
A
Explanation:
We know that impulse(J) is the force times the change in time OR mass times the change in velocity. Because we're given mass and a final and initial velocity, we'll use the second option written as:
mΔv=J
Since Δ means change in, and Δv= vf-vi, we subtract 10 m/s from 15 m/s to get 5 m/s for Δv.
Now plugging in Δv and m(1,200 kg)
1,200 kg * 5 m/s =J
6000 kg* m/s = J
Two drums of the same size and same height are taken.
i)what will be the difference in liquid pressure on their bases if A of them is completely filled and B is half filled and kept at the same place.
ii) what will be the difference in liquid pressure on their bases if both A and B are filled with water completely but one of them is kept at nepal and another in india?why?
iii) what will be the difference in liquid pressure on their bases if A is filled with water and B is filled with salty water and kept at delhi in the same position?why?
Answer:
i) The pressure acting on the base of B will be half the pressure acting on the base of A
ii) The pressure acting on the base of B will be the same as the pressure acting on the base of A
iii) The pressure on the base of drum A will be slightly less than the pressure on the base of drum B
Explanation:
The pressure acting on the base of the drum, P = h·ρ·g
Where;
h = The level of the liquid in the drum
[tex]h_{max}[/tex] = The height of the drums
ρ = The density of the liquid in the drum
g = The acceleration due to gravity ≈ 9.81 m/s²
i) If A is completely filled, we have [tex]h_A[/tex] = [tex]h_{max}[/tex]
Therefore, [tex]P_A[/tex] = [tex]h_{max}[/tex]×[tex]\rho_{liquid}[/tex]×g
If B is half filled, we have, [tex]h_B[/tex] = (1/2)·[tex]h_{max}[/tex]
[tex]P_B[/tex] = (1/2) × [tex]h_{max}[/tex]×[tex]\rho_{liquid}[/tex]×g
Therefore, [tex]P_B[/tex] = (1/2) × [tex]P_A[/tex]
The pressure acting on the base of B will be half the pressure acting on the base of A
ii) If both A and B are each filled with water (the same liquid), then the pressure on their bases will be [tex]P_A[/tex] = [tex]h_{max}[/tex]×[tex]\rho_{water}[/tex]×g = [tex]P_B[/tex], the same, given that the acceleration due to gravity, g, is constant and the same in Nepal and India
iii) If A is filled with water, and B is filled with salty water, we have that, the density of salty water is slightly higher than water, therefore, we get;
[tex]P_A[/tex] = [tex]h_{max}[/tex]×[tex]\rho_{water}[/tex]×g < [tex]P_B[/tex] =
The pressure on the base of drum A will be less than the pressure on the base of drum B.