Answer:
so here the initial momentum was all in the X direction. This is Equalling the mass. I'm someone multiplied by visa one initial Equalling 1345 kilograms multiplied by 15.7 meters per second. This is Equalling 2.11 times 10 to the fourth kilograms meters per second. Now the car stick together and we can say that the final momentum is Equalling. I'm someone plus himself to multiplied by the final velocity. This is gonna be equal to 1345 kilograms plus 1900 23 kilograms. This is multiplied by 14 0.5 meters per second. And we find that the final month Thomas Equalling 4.74 times 10 to the fourth kilograms meters per second. Now the y component of the final momentum, we can say that he's sub final. Why would be equaling two 4.74 times 10 to the fourth kilograms meters per second? This would be equally rather multiplied by sign of 63.5 degrees. This is Equalling 4.24 times 10 to the fourth kilograms meters per second. By law, of the conservation of momentum. We can say that the Y component of the final momentum equals the why component of the initial momentum. This is equaling EMS up to visa to initial and be some to initial is found to be equal to the final. The white component of final momentum divided by the second cars mass and so this would be 4.24 times tend to the fourth kilograms meters per second, divided by M sub 2 1923 kilograms and this is giving us 22.0 meters per second. And of course this is greater than 20 whether 20.1 meters per second. And so we can say that yes, this car is exceeding the speed limit.
Explanation:
mark me brainliest!!
The magnetic flux through a coil of wire containing two loops changes at a constant rate from -58 wb to 38 wb in 0. 34 s. What is the emf induced in the coil?
Since the magnetic flux through a coil of wire containing two loops changes at a constant rate from -58 wb to 38 wb in 0. 34 s, the emf induced in the coil is -5.65 V
Induced emf in coilThe induced emf in the coil is given by ε = -NΔΦ/Δt where
ΔΦ = change in magnetic flux Φ₂ - Φ₁ where Φ₁ = initial magnetic flux = -58 Wb and Φ₂ = final magnetic flux = 38 Wb and and Δt = change in time = t₂ - t₁ where t₁ = initial time = 0 s and t₂ = final time = 34 sand N = number of loops of coil = 2Since ε = -NΔΦ/Δt
ε = -N(Φ₂ - Φ₁)/(t₂ - t₁)
Substituting the values of the variables into the equation, we have
ε = -N(Φ₂ - Φ₁)/(t₂ - t₁)
ε = -2(38 Wb - (-58 Wb))/(34 s - 0 s)
ε = -2(38 Wb + 58 Wb)/(34 s - 0 s)
ε = -2(96 Wb)/34 s
ε = -192 Wb/34 s
ε = -5.65 Wb/s
ε = -5.65 V
So, the emf induced in the coil is -5.65 V
Learn more about induced emf in coil here:
https://brainly.com/question/13051297
The electrical action generated by a non-electrical source, measured in volts. The emf induced in the coil is -564.7 V.
What is EMF?The electrical action generated by a non-electrical source, measured in volts, is referred to as emf or electromotive force. Devices, such as batteries or generators, generate an emf by converting various sources of energy into electrical energy.
The emf induced in a coil is given by
[tex]\varepsilon = \dfrac{-N \times \triangle \phi}{ \triangle t}[/tex]
where
ΔΦ is the change in magnetic flux, Δt is the change in time, and N is the number of loops.
Given that the initial magnetic flux is -58 Wb while the final magnetic flux is 38 Wb. Also, the change in time is 0.34 seconds and the number of loops is 2. Therefore, the emf induced can be written as,
[tex]\varepsilon = \dfrac{-N \times \triangle \phi}{ \triangle t}[/tex]
[tex]\varepsilon = \dfrac{-(2) \times [38-(-58)]}{0.34}\\\\\varepsilon = -564.7\rm\ V[/tex]
Hence, the emf induced in the coil is -564.7 V.
Learn more about EMF:
https://brainly.com/question/15121836
#SPJ4
The particles in a balloon push out on the sides of the balloon. What is the reaction force?
A. The balloon wall pushes the enclosed air particles inwards.
B. The string of the balloon on the particles in the environment.
C. There are no forces involved in a balloon filled with air.
Sound can't travel through a
Question 4 options:
A. liquid.
B. vacuum.
C. solid.
D. gas.
Answer:
Vacuum
Explanation:
Sound waves can travel through any medium, such as a solid, a liquid, or a gas. However, sound doesn’t travel through a vacuum, which is why sounds can't be heard in outer space.
PF
A block initially at rest on a horizontal, frictionless surface is accelerated by a constant horizontal force of 5. 0 newtons. If 15 joules of work is done on the block by this force while accelerating it, the kinetic energy of the block increases by.
By the work-energy theorem, the block's kinetic energy is increased by 15 J. The only force performing work on the block is the constant 5.0-N push.
What is the direction of the normal contact force of the road on the wheels?
Tick one box.
Down
Left
Right
Up
The direction of the normal contact force of the road on the wheels is : ( B ) Left
Contact force
The contact force of the road on the wheels will act in a direction opposite to the movement of the wheel on the road. therefore as the wheel moves forward ( right ), the contact force will move backwards ( left ) of the direction of motion.
Hence we can conclude that the direction of the normal contact force of the road on the wheels is : ( B ) Left
Learn more about contact force : https://brainly.com/question/18451249
#SPJ2
Money functions primarily as a medium of
a unit of
and a store of value.
.
Answer:
buying and selling goods and services. and exchange account
Explanation:
:)
Answer:
when money is used to intermediate the exchange of goods and services
One square megameter is equal to 1. 0×106 square kilometers. How many square megameters are in 4,000,000 square kilometers?
Answer:
One has 1E6 km^2 / MM
4E6 km^2 / (1E6 km^2/MM) = 4 MM or 4 megameter
In 4000,000 square kilometers, there are 4 square megameters if the one square megameter is equal to 1. 0×106 square kilometers.
What is unit conversion?It is defined as the conversion from one quantity unit to another quantity unit followed by the process of division, and multiplication by a conversion factor.
We have:
One square megameter = [tex]1\times10^6[/tex]
Let's suppose the x square megameters in the 4,000,000 square kilometers
Then x can be found as follows:
[tex]\rm x = \frac{4,000,000}{1\times10^6}[/tex]
x = 4 square megamters
Thus, in 4000,000 square kilometers, there are 4 square megameters if the one square megameter is equal to 1. 0×106 square kilometers.
Learn more about the unit conversion here:
brainly.com/question/14350438
#SPJ4
Jessie hits a foul ball
straight up in the air
during a softball game.
Assuming all energy is
conserved, at what height
did the 3 kg ball travel if it
had a velocity of 11 m/s?
Answer:
GPE=(3*11^2)/2
(3*121)/2
363/2
GPE=181.5J
Explanation:
Control rods are used to slow down the reaction in the reactor core when the core becomes too hot. Please select the best answer from the choices provided T F.
The best answer is true. Yes, control rods are used to slow down the reaction in the reactor core when the core becomes too hot.
What is a nuclear reactor?A nuclear reactor, often known as an atomic pile, is a device that initiates and controls nuclear chain reactions or nuclear fusion processes.
Nuclear reactors are used in nuclear power plants to generate energy as well as in nuclear marine propulsion.
Control rods are employed in nuclear reactors because the processes that occur in a nuclear reactor are very exothermic.
As a result, when these control rods are infused into a nuclear reactor, they absorb neutrons and aid in the management of the chain reaction. As a result, the rate of the chain reaction is brought under control.
As a result, we may infer that the statement control rods are employed to slow down the reaction in the reactor core when it gets too hot is correct.
Hence the best answer is true. Yes, control rods are used to slow down the reaction in the reactor core when the core becomes too hot.
To learn more about the nuclear reactor refer to the link;
https://brainly.com/question/896706
How does the maximum value of the current depend on the frequency of the ac voltage source?.
The maximum value of the current depend on the frequency of the ac voltage source because it increases as the frequency increases.
What is peak current of AC source?
The peak current of an ac source is the amplitude current flowing in the ac circuit.
The magnitude of the peak current is calculated as follows;
I₀ = i/(sin ωt)
I₀ = i/(sin 2πft)
where;
I₀ is the peak currenti is the ac currentω is angular speedf is the frequencyt is timemaximum value ac currenti = I₀ x sin 2πft
From the equation above, as the frequency of the of the ac voltage source increases, the value of the ac current (i) increases.
Thus, the maximum value of the current depend on the frequency of the ac voltage source because it increases as the frequency increases.
Learn more about ac current here: https://brainly.com/question/10715323
#SPJ1
Which letter explains why no machine is 100 percent efficient.
A.Mechanical energy is transformed into thermal energy by friction.
B.Mechanical energy is transformed into electrical energy by a spark.
C.Thermal energy is transformed into mechanical energy by friction.
Answer:
A
Explanation:
Think about rubbing your hands together- the friciton produces heat
On the electromagnetic spectrum, what type of light is higher energy: X-rays or radio waves?
Answer:
Radio
Explanation:
X-rays is 10 x 10^-10
radio is 10⁴
The study of electrons as it relates to their use in electric devices
Answer:
An electron is a component of the broader term, electricity. Generally electricity refers to the control, manipulation, and use of the movement of electrons to perform some kind of work (motion/rotation, light, heat, etc…).
Explanation:
Or
put this
The study of electrons as it relates to their use in electric devices is electricity.
But I will go with the first one
Distinguish between pressure and force in the case of wang yourself on a common bathroom scale
Answer: hey here's your answer...
Explanation: We can think of a force as a push on a surface, such as the force due to gravity you exert when standing on a bathroom scale. Pressure involves the distribution of force. The scale measures force, not pressure, so your weight reading is the same no matter how you distribute your weight on the scale.
Hope this helps...
Have a nice day-
Why does the spectroscopic parallax method only work for main sequence stars?.
Answer:
Only main sequence stars have a well-defined relationship between spectral type and luminosity.
Explanation:
Low-mass stars have much longer lifetimes than high-mass stars.
4. Which best explains the function of the alveoli in the respiratory system?
Page 135
A. The alveoli help to keep the lungs healthy by providing a way for all the cells
in the lungs to obtain nutrients from the bloodstream
B. The alveoli help to keep the lungs inflated when you breathe out and make it
possible to absorb oxygen
C. The alveoli provide a large surface area for absorbing oxygen from the air and
releasing carbon dioxide wastes from the bloodstream
D. The alveoli provide a large surface area for absorbing oxygen from the air
when you breathe in and look like a bunch of grapes
a
Answer:
C
Explanation:
Alveoli are tiny functioning structures that compose your lungs. They help with respiration. They have a large total surface area, which is very useful for respiration. The more surface area there is, the more transactions can happen. Which means that breathing will be easier/faster when you have more alveoli. (Please rate this answer if you have time!)
A fish swimming at a constant speed of 0.5 m/s suddenly notices a shark
appear behind it. Five seconds later, the fish is swimming in the same
direction at a speed of 3.5 m/s. Calculate the fish's acceleration?
PLEASE HELP <33
What is the average velocity of the fly between 0 and 15 seconds
Answer:
where is the displacement
[tex]v = \frac{s}{t} [/tex]
The average velocity of the fly between 0 and 15 seconds will be 10 m/sec.Velocity is the time-based component.
What is average velocity?
The average velocity is the ratio of the total distance traveled to the total time taken by the body. Its unit is m/sec.
From the given graph it is obsderved that the displacement from 0 to 15 seconds will be 150 m.
[tex]\rm V = \frac{D_2-d_1 }{t_2-t_1} \\\\ V = \frac{150}{15-0} \\\\ V= 10 \ m/sec[/tex]
Hence the average velocity of the fly between 0 and 15 seconds will be 10 m/sec.
To learn more about the average velocity refer to the link;
https://brainly.com/question/862972
#SPJ4
Select the correct answer.
Which of the following social events are often centered around sporting events?
A. Tailgate Parties
B. Parades
C. Pep Rallies
D. All of the above
its about dirve its about power
Answer:
We stay hugely we devour
Explanation:
It's the rock
please solve this as fast as you can
B
The combustion of the fuel in the helicopter is chemical energy. The vertical change in height is the result of kinetic energy. Because the helicopter is hovering in the air, it has gravitational potential.
Answer:
this would be B friend :)
Explanation:
If a satelite with a mass of 9 x 10^2 kg is placed in an orbit around a planet with a mass of 6 x 10^20 kg, at a speed of 17000 m/s, find the distance from the center of the planet to the satelite.
Hi there!
We can begin by deriving an equation for the orbital radius.
For an object orbiting the earth, it is experiencing a centripetal force due to the force of gravitation.
Recall Newton's Law of Universal Gravitation:
[tex]F_g = \frac{Gm_1m_2}{r^2}[/tex]
G = Gravitational Constant (6.67 × 10⁻¹¹ Nm²/kg²)
m = masses (kg)
r = radius (m)
This is equivalent to the satellite's centripetal force experienced:
[tex]F_c = \frac{m_sv^2}{r}[/tex]
[tex]m_s[/tex] = mass of satellite (kg)
v = velocity (m/s)
r = radius (m)
Set the two equal, and rearrange for the orbital radius of the satellite.
[tex]\frac{Gm_sm_p}{r^2} = \frac{m_sv^2}{r}\\\\\frac{Gm_p}{r} = v^2\\\\r = \frac{Gm_p}{v^2}[/tex]
Notice that the orbital radius of the satellite does NOT depend on the satellite's mass. (we canceled it out).
Now, plug in the given values.
[tex]r = \frac{(6.67\times 10^{-11})(6\times 10^{20})}{17000^2} = \boxed{138.478 m}[/tex]
How can gravitational tugs from orbiting planets affect the motion of a star?.
Answer:
Gravitational tugs from orbiting planets don't affect the motion of a star. The star, being much larger than the planet, has a much smaller orbit. But it does move slightly. Explain how alien astronomers could deduce the existence of planets in our solar system by observing the Sun's motion.
A group of graduate students, bored during a cloudy night at the observatory, begin to make bets about the time different stars will take to evolve. If they have a cluster of stars which were all born at roughly the same time, and want to know which star will become a red giant first, which of the following stars should they bet on?
A) a star of about the same mass as our Sun
B) a star that would type O on the main sequence star
C) a star of about 1/2 the mass of our Sun
D) a star of about 8% the mass of our Sun
E) you can't fool me, all stars reach the red giant stage in roughly the same number of years
The stars which they should bet on is D) a star of about 8% the mass of our Sun.
What is a Star?
This refers to the astronomical object which is very far away in the galaxy and and of which the closest star to the Earth is in fact the Sun.
With this in mind, we can see that the students are making bets about the time different stars will take to evolve and want to know which star will become a red giant first so they should bet on a star of about 8% the mass of our Sun.
Read more about stars here:
https://brainly.com/question/25821071
A direct current of 3.0 A flows through a circuit consisting of a battery and a 6.0 A resistor. Calculate the potential difference across the resistor. a
Question :-
A Direct Current of 3.0 A flows through a Circuit consisting of a Battery and a 6.0 Ohm's Resistor. Calculate the Potential Difference across the Resistor .Answer :-
Potential Difference is 18 Volt's .Explanation :-
As per the provided information in the given question, we have been given that the Current of the Device is 3.0 Ampere . The Resistance is given as 6.0 Ohm's . And, we have been asked to calculate the Potential Difference .
As we know ,
V = I RWhere ,
V denotes to Potential DifferenceI denotes to CurrentR denotes to ResistanceTherefore , by Substituting the given values in the above Formula :-
[tex] \sf {\dag \: \: \: Potential \: Difference \: = \: Current \: \times \: Resistance} [/tex]
[tex] \sf {\Longrightarrow \: \: \: \sf Potential \: Difference \: = \: 3.0 \: \times \: 6.0} [/tex]
[tex] \sf {\Longrightarrow \: \: \: \sf Potential \: Difference \: = \: 3 \: \times \: 6} [/tex]
[tex] \bf {\Longrightarrow \: \: \: \bf {Potential \: Difference \: = \: 18 \: }} [/tex]
Hence :-
Potential Difference = 18 Volt's .[tex] \underline {\rule {210pt}{4pt}} [/tex]
Additional Information :-
[tex] \Longrightarrow \: \: \: \sf {Voltage \: = \: Current \: \times \: Resistance} [/tex]
[tex]\Longrightarrow \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]
[tex]\Longrightarrow \: \: \: \sf {Resistance \: = \: \dfrac {Voltage}{Current} } [/tex]
[tex] \underline {\rule {210pt}{4pt}} [/tex]
Note :-
Kindly Scroll the Screen from Right to Left for Better View .(WILL MARK BRAINLIST) Pure substances can be made of atoms that are attracted to each other or atoms that are not attracted to each other. Which type of pure substance can create elaborate structures? (1 point)
Atoms that are attracted to each other because the bonds that form between them can support the creation of the structure.
Atoms that are attracted to each other because they will mix together to form a mixture with a different structure.
Atoms that are not attracted to each other because they will form bonds with each other and create a larger structure.
Atoms that are not attracted to each other because they will stay still and end up laying on top of each other.
→ Pure substances can be made of atoms that are attracted to each other or atoms that are not attracted to each other. Which type of pure substance can create elaborate structures?
SOLUTION;Option c) Atoms that are not attracted to each other because they will form bonds with each other and create a larger structure.
A car of 15 kg is traveling on a circular track. If the radius of the track is
7. 8 m and the period is 8. 5 seconds, what's the centripetal force on
the car? (Round to the nearest hundredth)
The magnitude of the centripetal force on the car is 69.6 N.
What is centripetal force?This is a force acting on a body in circular path and it is directed to the center around which the body is moving.
To calculate the centripetal force on the car, we use the formula below.
Formula:
F = m(4π²/t²)........ equation 1Where:
F = Magnitude of the centripetal force on the car, m = mass of the cart = timeFrom the question,
Given:
m = 15 kgt = 8.5π = 3.14Substitute these values into equation 1
F = 15(4×3.14²/8.5²)F = 69.6 NHence, the magnitude of the centripetal force on the car is 69.6 N.
Learn more about centripetal force here: https://brainly.com/question/20905151
28. (a) A pendulum that has a period of 3.00000 s and that is located where the acceleration due to gravity is 9.79m/s2 is moved to a location where it the acceleration due to gravity is 9.82m/s2. What is its new period? (b) Explain why so many digits are needed in the value for the period, based on the relation between the period and the acceleration due to gravity.
The answer is "(a) 2.99541 s(b) Since the period is related to the square root of the acceleration of gravity, when the acceleration changes by 1% the period changes by (0.01)2=0.01% so it is necessary to have at least 4 digits after the decimal to see the changes." But please include the steps to each solution.
Answer:
See below ↓
Explanation:
Assuming the motion of a simple pendulum, the time period is given by
⇒ T = 2π√(L/g)⇒ T₁/T₂ = √(g₂/g₁)The values we have
T₁ = 3 sg₁ = 9.79 m/s²g₂ = 9.82 m/s²Solving
T₂ = T₁/√(g₂/g₁)T₂ = 3/√(9.82/9.79)T₂ = 3.004593 secondsThis many digits are needed because the acceleration is changed by a very small percentage (roughly 2 decimal places)So on taking the square root of the ratio of the gravity due to acceleration (2 values), 4 decimal places will be present at the very least
do you think your real?
Answer: Yes I am alive.
Based on the figure, a decrease in _________ could cause the economy to move from point a to point b
A decrease in production of goods could cause the economy to move from point a to point b.
What cause shifts in economy?Shifts in the production are due to many factors that change the output of an economy such as advances in technology, changes in resources, more education or training and changes in the labor force.
So we can conclude that a decrease in production of goods could cause the economy to move from good to poor.
Learn more about economy here: https://brainly.com/question/17996535