The most likely true statement about the evidence at the house is that there will be a cigarette at the point of origin.
What is liquid?Liquid is a state of matter in which particles are dispersed in an environment in which they can move freely, resulting in a fluid-like form. Liquids take the shape of their container and are able to flow, which makes them the most common state of matter in the universe. Common examples of liquids include water, oil, alcohol, and juice.
This is because cigarettes are the most common cause of house fires, and so it is likely that a cigarette was the source of the fire. Additionally, there may be matches near the cigarette, as smokers often use matches to light their cigarettes. It is unlikely that there will be flammable liquids in the house, as this is not a common source of fires. Lastly, it is also unlikely that the cigarette itself will have burned down with the house, as it is likely that the fire began and spread relatively quickly.
To know more about liquid click-
https://brainly.com/question/28425080
#SPJ1
What is the empirical and molecular formula for sucralose? The percent composition is 36.25% C, 4.82% H, 26.75% Cl and 32.19% O. The molar mass is 397.63 g/mole.
let's imagine you have 100 g of sucralose
C: 36.25 g No of moles = 36.25/12 = 3.02
H : 4.82 g No of moles = 4.82/1 = 4.82
Cl: 26.75 g No of moles = 26.75/35.5 = 0.75
O: 32.19 g No of moles = 32.19/16 = 2.01
divide all the four mole numbers by the smallest one (0.75)
Empirical formula = C4H6ClO3
Let the molecular formula be (C4H6ClO3)n.
(4x12+6x1+35.5+3x16) x n = 397.63
n = 3
Molecular formula = C12H18Cl3O9
the molecular formula I've searched online is C12H19Cl3O8 so I am also not very sure
the pka of ascorbic acid is 4.2. at what ph is the ratio of the unprotonated to protonated forms of ascorbic
The pH at which the ratio of unprotonated to protonated forms of ascorbic acid is equal is at a pH of approximately 4.2. At this pH, half of the ascorbic acid molecules are in their unprotonated form (ascorbate,[tex]C_6H_8O_6[/tex]), while the other half are in their protonated form (ascorbic acid, [tex]C_6H_7O_6H[/tex]).
What is pH
pH stands for "potential of hydrogen." It is a measure of the acidity or basicity of a solution and is defined as the negative logarithm of the concentration of hydrogen ions (H+) in a solution. The pH scale ranges from 0 to 14, with 7 being neutral, less than 7 being acidic, and greater than 7 being basic or alkaline.
Here you can learn more about ascorbic acid
brainly.com/question/11095182
#SPJ4
how to find the base dissociation constant for nickel hydroxide
The base dissociation constant ([tex]K_b[/tex]) for nickel hydroxide can be found through titration.
This would involve adding a strong acid, such as hydrochloric acid, to a solution of nickel hydroxide until the reaction reaches neutralization.
You would then measure the concentration of hydroxide ions (OH-) in the solution at various points throughout the titration. By using the data obtained from the titration, you can then calculate the Kb of nickel hydroxide using the equation: Kb = [[tex]OH^-[/tex]]²/[Ni(OH)₂].
You would need to repeat the experiment multiple times to obtain an average value for [tex]K_b[/tex] and to ensure accuracy. This value would give you an indication of the strength of the nickel hydroxide as a base.
To know more about base dissociation constant click on the link below:
https://brainly.com/question/28197409#
#SPJ11
254. A gas cylinder contains 0.722m³ of hydrogen gas at a pressure of 10.6 atm. If the
gas is used to fill a balloon at a pressure of 0.96 atm, what is the volume in m³ of the
filled balloon?
Answer:
2928281m² gas is used to fill a balloon at a pressure of 0.96 atm, what is the volume in m³ of the
filled balloon
Using the conversation factor of 12 eggs=1 doz, how many doz eggs are in 456 eggs
Classify each property as intensive or extensive. a. volume b. boiling point c. temperature d. electrical conductivity e. energy
The intensive and extensive properties are classified are mentioned below.
What is intensive property?
Pressure, density, temperature, viscosity, surface tension, refractive index, electromagnetic field, chemical potential, and specific surface tension are examples of intense qualities that are independent of the quantity of substance (or substances) present in the system.
What is extensive property?
A physical quantity's value is inversely correlated with the size of the system it describes or the amount of matter present. For instance, a sample's mass, which depends on the substance's amount, is a significant quantity.
Large-scale properties include volume and energy. Intensive qualities are unrelated to substance concentration. Intensive features include temperature, electrical conductivity, and boiling point.
Therefore, intensive and extensive properties are classified are mentioned above.
Learn more about intensive property from the given link.
https://brainly.com/question/17651922
#SPJ4
The relative atomic mae of element can be calculated by taking the average ma of all the element electron clicked the wrong word
Relative atomic mass (Ar) or atomic weight is defined as the ratio of the average mass of atoms of a chemical element in a particular sample to the atomic mass constant.
What is the parameter for relative atomic mass of elements?One-twelfth of the mass of an atom of carbon-12 is the atomic mass constant, denoted by the symbol mu. The resulting number, which is dimensionless because the ratio's two components are masses, is referred to as a relative value.
Simply add the relative masses of a molecule's component parts to determine its relative mass. If you know the relative atomic masses of the constituent elements, this is easy.
Therefore, The weighted average of a molecule's mass in relation to one-twelfth of the mass of a carbon-12 atom is known as the relative molecular mass (Mr or RMM).
Learn more about atomic mass here:
https://brainly.com/question/17067547
#SPJ4
what part of body birds use to attack
Answer:beek
Explanation:
A 32. 4 L gas sample at STP is compressed to a volume of 28. 4 L, and the temperature is increased to 352 K.
What is the new pressure of the gas in atmospheres? Answer: 1. 47atm
How do I solve this?
The Ideal Gas Law (PV = nRT) can be used to address this issue, where P is for pressure, V is for volume, n is for moles, R is for the ideal gas constant, and T is for temperature.
We must maintain a constant number of gas moles in order to determine the new pressure following compression and a temperature change. The equation (P1V1)/T1 = (P2V2)/T2 can be used to show the relationship between the initial and final pressure and volume. Calculate P2, the new pressure, by plugging in the provided numbers. Keep in mind to change the temperature and volume units to Kelvin.
P2 × V2 = n × R × T2
P2 = (n × R × T2) / V2 = (n × R × 352) / 28.4
Learn more about Ideal Gas Law:
brainly.com/question/28257995
#SPJ4
a student wishes to determine the concentration of ag in a solution of agno3. the student combines 10 ml of agno3 with excess na2so4
The student's plan to determine the concentration of Ag in a solution of AgNO3 by combining 10 ml of AgNO3 with excess Na2SO4 is an example of a precipitation reaction.
In a precipitation reaction, two solutions are mixed together and an insoluble solid (precipitate) is formed, which can then be filtered and weighed to determine the amount of the precipitated species.
The reaction between AgNO3 and Na2SO4 can be written as follows:
AgNO3 + Na2SO4 → Ag2SO4 (precipitate) + 2 NaNO3 (dissolved)
The student would then filter the mixture to remove the precipitate, and weigh the precipitate to determine the amount of Ag2SO4 that was formed. The concentration of Ag in the solution can then be calculated using the stoichiometry of the reaction.
It is important to note that this method assumes that the precipitation reaction goes to completion, and that the Ag2SO4 precipitate does not dissolve in the solution. In practice, this may not always be the case, and it may be necessary to perform additional steps, such as adjusting the pH of the solution or adding a soluble salt, to ensure that the precipitation reaction goes to completion.
learn more about concentration of ag in a solution of agno3 at:
brainly.com/question/30139440
#SPJ4
when should you start a new chemical waste container in the lab? select one: when you accidentally spill chemicals down the side of the current container when you need to dispose of another chemical that is compatible with chemicals in the current container when the contents of the current container are a couple inches below the brim of the container when the contents of the current container completely fill the container to the brim
A new chemical waste container should be started when the contents of the current container completely fill the container to the brim.
Starting a new chemical waste container in the laboratory should be done when the contents of the current container completely fill the container to the brim. This is a standard laboratory practice to ensure the proper segregation and containment of different types of waste. Mixing different chemicals in the same container can be dangerous and create hazardous chemical reactions.
Additionally, overfilling a container can cause it to spill or overflow, which could lead to exposure or contamination. It is also important to properly label each container to ensure the proper disposal and handling of the waste.
Learn more about Standard Laboratory Practice here: https://brainly.com/question/206127
#SPJ4
how many electrons would have to be removed from a coin to leave it with a charge of
[tex]6.3*10^{11}[/tex] electrons would have to be removed from a coin to leave it with charge of [tex]+1*10^{-7}[/tex] C
The molecules are typically ionized by either removing an electron or by adding a proton once they are in the gas phase and enter the mass spectrometer. The removal of an electron is accomplished by blasting the molecules with a high-energy electron beam, typically made up of electrons with a 70 eV energy. Compared to the ionization energy of the molecules being assaulted, this electron beam has a much higher energy. The method is referred to as electron ionization (EI). Since the resultant ion has one unpaired electron, it is a radical ion.
According to the question,
∣q∣ = [tex]1*10^{-7}[/tex] C, we know charge of an electron is [tex]1.6*10^{-19}[/tex] C
∴ number of electrons (n) = [tex]\frac{q}{e}[/tex] = [tex]\frac{1*10^{-7}}{1.6*10^{-19}}[/tex] = [tex]6.3*10^{11}[/tex] (Ans)
To know more about electrons
brainly.com/question/6283462
#SPJ4
The complete question is:
How many electrons would have to be removed from a coin to leave it with a charge of [tex]+1*10^{-7}[/tex] C ?
ind a solution to . if necessary, use to denote an arbitrary constant. xy 2x 3y 6
According to the question denote an arbitary constant is xy - xy + 2x - 3y = 6 ,xy - 2x + 3y = 6 .
What is the arbitary ?Arbitrary is a term used to describe something that is based on personal opinion, preference or whim, rather than any reason or system. It is usually used to describe decisions, rules or criteria that are subjective, rather than objective, and cannot be justified. For example, an arbitrary decision might be to select a winner for a competition based on their clothing rather than their skills. It can also refer to a number that is randomly selected, with no link to any existing system or pattern.
Subtract xy from both sides: -2x + 3y = 6 - xy
Divide both sides by -2: y = -(x/2) + (6 - xy)/2
Therefore, y = -(x/2) + (6 - xy)/2, where is an arbitrary constant.
To learn more about arbitary
https://brainly.com/question/14265635
#SPJ4
what is the difference between a substance ""getting wet"" and ""being dissolved"" in a liquid at the particulate leve
The difference between a substance ""getting wet"" and ""being dissolved" is that when it gets wet it means it is being coated with liquid whereas being dissolved means that it is dispersed in liquid.
When a substance "gets wet," it means that the surface of the substance is being coated with a liquid, but the substance itself is not changing its chemical composition or dissolving in the liquid. The substance remains intact and separate from the liquid, much like a solid piece of food might become wet when it is immersed in water.
When a substance "is dissolved" in a liquid, it means that the substance has broken down into individual particles and has become evenly dispersed throughout the liquid.
To know more about substance click here:
https://brainly.com/question/24372098#
#SPJ11
Draw a Lewis structure for a compound with molecular formula C_4H_11N in which three of the carbon atoms are bonded to the nitrogen atom. What is the geometry of the nitrogen atom in this compound? Does this compound exhibit a molecular dipole moment? If so, indicate the direction of the dipole moment.
Three single bonds and one lonely pair of electrons connect the central nitrogen atom in C4H11N to the three carbon atoms. As a result, the nitrogen atom is in the sp3 hybridization state.
The nitrogen atom has a trigonal pyramidal shape as a result. The positioning of the molecule's bond dipoles affects the molecular dipole moment. One lone pair of electrons and three single bonds between the core nitrogen atom and the three carbon atoms make up C4H11N. The nitrogen atom ends up in the sp3 hybridization state as a result. The molecule has a non-zero dipole moment with the positive end facing the bond pairs and the negative end facing the lone pair when it has a lone pair and three bond pairs in a trigonal pyramidal shape. The lone pair repels the bond pairs more than the bond pairs repel one another.
learn more about nitrogen atom here:
https://brainly.com/question/13825729
#SPJ4
A gaseous compound has a density of 1. 21g / L at 71. 1 C 1. 6. Assuming ideal behaviorcalculate the molar mass of the gas
Assuming ideal gas behavior, the molar mass of the gas can be calculated using the equation: molar mass = density * volume * molar mass of air.
For this calculation, the density is 1.21 g/L, the volume is 1 L, and the molar mass of air is 28.9 g/mol. This gives a molar mass of 30467922 g/mol for the gas.
The molar mass of a gas can be used to determine its molecular weight and the number of moles of the gas present in a sample. This can be useful for a variety of calculations, such as determining the amount of heat energy released or absorbed when a gas undergoes a chemical reaction.
Learn more about molar mass
https://brainly.com/question/21334167
#SPJ4
Why is there a decrease in electron affinity going from lithium to sodium?A. There is a stronger nuclear charge, with no additional shielding electrons or number of shells.B. There are fewer spaces in the valence shell in which to place the added electron.C. The nucleus has fewer protons, thus can't attract an extra electron as well.D. Despite the stronger nuclear charge, there are additional shielding electrons and an increase in the number of shells.E. This is the only electron affinity decrease noted on the table and it is just an unexplained anomaly.
Decrease in electron affinity going from lithium to sodium is due to despite the stronger nuclear charge, there are additional shielding electrons and an increase in the number of shells.
Electron affinity is termed as the change in energy (in kJ/mole) of the neutral atom (in the gaseous phase) when an electron will be added to the atom to form a negative ion.
Electron affinity will decreases from down the groups and from right to left across the periods on the modern periodic table because the electrons were placed in a higher energy level which is far from the nucleus, thus a decrease from its pull.
To know more about electron affinity here
https://brainly.com/question/11302894
#SPJ4
place the steps required to determine whether or not a precipitate forms when two solutions are mixed in the correct order. start with the first step at the top of the list.
The steps in the right order to determine whether or not a precipitate form when two solutions are mixed are given below:
1.) note the ions present in the reactants2.) consider possible cation-anion combinations3.) use the solubility rules to determine whether or not either of the combinations gives an insoluble saltWhat are Solubility Rules?There are three outcomes that can happen depending on a solute's solubility:
1) A solution is said to be diluted if the amount of solute in it is less than its solubility, or
2. maximum amount at which it can dissolve, and saturated if the solute content exactly equals its solubility.
Hence, the proper steps are given above,
Read more about precipitates here:
https://brainly.com/question/1783904
#SPJ1
place the steps required to determine whether or not a precipitate forms when two solutions are mixed in the correct order.
-consider possible cation-anion combinations
-note the ions present in the reactions
-use the solubility rules to determine whether or not either of the combinations gives an insoluble salt
tophat what main hazard does ethanol, hexanol, and kerosene pose in this experiment?
The main hazard posed by ethanol, hexanol, and kerosene in a "tophat" experiment is flammability.
Ethanol, hexanol, and kerosene are all flammable liquids that can easily ignite and cause fires if tophat they come into contact with a source of ignition such as a flame, spark, or heat source. Additionally, exposure to these liquids can cause skin irritation, eye damage, and respiratory irritation if they are inhaled. In tophat, It is important to handle these flammable chemicals with care, following proper safety protocols and wearing appropriate protective equipment to minimize the risk of fire or injury. So In a "tophat" experiment, the principal danger presented by ethanol, hexanol, and kerosene is flammability.
Learn more about flammability here:
https://brainly.com/question/14214497
#SPJ4
An aqueous kno3 solution is made using 60. 1 g of kno3 diluted to a total solution volume of 1. 96 l. (assume a density of 1. 05 g/ml for the solution. ).
The molar concentration of the aqueous KNO3 solution is 0.304 M.
To find the molar concentration of the aqueous KNO3 solution, we have to find the no. of moles of KNO3 in the given solution.
The number of moles of KNO3 can be calculated by using the formula:
moles = mass / molar mass
where the molar mass of KNO3 = 101.1 g/mol. So,
moles = 60.1 g / 101.1 g/mol = 0.595 mol
Now, we can use the no. of moles of KNO3 and the volume of the solution to calculate the molar concentration of the solution.
The molar concentration, or molarity, is defined as the number of moles of solute per liter of solution. We can use the formula:
molarity = moles/liters
So,
molarity = 0.595 mol / 1.96 L = 0.304 M
The molar concentration of the aqueous KNO3 solution is 0.304 M.
To learn more about molar concentration:
https://brainly.com/question/26255204
#SPJ4
The speed of light is about 3.0 x 10^8 m/s. Red light has a wavelength of about 6.5 × 10^-7 m. What is its frequency?
The frequency of the red wave with a wavelength of 6.5 × 10-⁷m is 4.62 × 10¹⁴ Hz.
How to calculate frequency?Wavelength refers the length of a single cycle of a wave, as measured by the distance between one peak or trough of a wave and the next.
The wavelength is often designated in physics as λ, and corresponds to the velocity of the wave divided by its frequency.
According to this question, the speed of light is about 3.0 x 10⁸ m/s. Red light has a wavelength of about 6.5 × 10-⁷ m.
6.5 × 10-⁷ = 3 × 10⁸ ÷ f
f = 3 × 10⁸ ÷ 6.5 × 10-⁷
f = 4.62 × 10¹⁴ Hz
Learn more about frequency at: https://brainly.com/question/18651058
#SPJ1
suppose you are performing a titration. at the beginning of the titration, you read the titrant volume as 2.20 ml. after running the titration and reaching the endpoint, you read the titrant volume as 22.13 ml. what volume, in ml, of titrant was required for the titration? type answer:
Suppose you are performing a titration, at the beginning of the titration, you read the titrant volume as 2.20 ml. after running the titration and reaching the endpoint, you read the titrant volume as 22.13 ml. The volume, in ml, of titrant was required for the titration is,
Final burette reading - initial burette reading
22.13 - 2.20
19.93ml
therefore the total volume of titrant required for the titration is 19.93ml.
To read the burette, you must be positioned so that your eyes are level with the meniscus's (a curved liquid surface). A parallax error will occur if you read from either above or below the meniscus. Keep a dark piece of paper behind the buret so you can better read the meniscus there.
To know more about titration click here:
brainly.com/question/29590776
#SPJ4
Do you use parentheses on a polyatomic ion when you only have one of them?
Responses
A nono
B yesyes
C sometimessometimes
How many atoms are in Ca3 PO4 2?
There are 12 atoms of calcium (Ca), 2 atoms of phosphorus (P), and 8 atoms of oxygen in the formula Ca3(PO4)2 (O).
What is calcium phosphate?The elements calcium (Ca), phosphorous (P), and oxygen are combined to form the chemical calcium phosphate (O). Dicalcium phosphate, tricalcium phosphate, and octacalcium phosphate are only a few of its many types. Apatite, a common mineral form of calcium phosphate, is a crucial component of bones and teeth.
How can you determine it?The number of atoms in Calcium Phosphate can be determined by multiplying the coefficient of each element with the number of atoms in the empirical formula, which gives the chemical formula Ca3(PO4)2. Since calcium phosphate has the empirical formula CaPO4, it has 3 calcium (Ca), 1 phosphorus (P), and 4 oxygen (O) atoms.
The number "3" in front of the empirical formula CaPO4 denotes that there are three times as many Ca, P, and O atoms in Ca3(PO4)2 as in the empirical formula. As a result, the following formula can be used to determine how many Ca, P, and O atoms are present in Ca3(PO4)2:
3 calcium (Ca) atoms plus 1 phosphorus (P) atom plus 4 times 2 oxygen (O) atoms equals 12 calcium (Ca) atoms plus 2 phosphorus (P) atoms plus 8 oxygen atoms (O)
As a result, there are 12 atoms of calcium (Ca), 2 atoms of phosphorus (P), and 8 atoms of oxygen in the formula Ca3(PO4)2 (O).
To know more about calcium phosphate, visit:
https://brainly.com/question/29231164
#SPJ4
When a student adds 30.0 mL of 1.00 M HCl to 0.56 g of powdered Fe, a reaction occurs according to the equation above. When the reaction is complete at 273 K and 1.0 atm, which of the following is true?
The true statement is "HCl is in excess, and 0.100 mol of HCl remains unreacted" Therefore, option A is correct.
Given:
Molar mass of Fe = 55.85 g/mol
Mass of Fe = 0.56 g
Moles of Fe = Mass of Fe / Molar mass of Fe
Moles of Fe = 0.56 g / 55.85 g/mol
Moles of Fe ≈ 0.01 mol
According to the balanced equation, the mole ratio between Fe and HCl is 1:2. This means that for every 1 mole of Fe, 2 moles of HCl are required.
Therefore, the moles of HCl required to react completely with the given amount of Fe are:
Moles of HCl = 2 × Moles of Fe
Moles of HCl = 2 × 0.01 mol
Moles of HCl = 0.02 mol
Volume of HCl solution = 30.0 mL = 30.0 mL × (1 L / 1000 mL) = 0.0300 L
Molarity of HCl = 1.00 M
Moles of HCl = Molarity × Volume
Moles of HCl = 1.00 M × 0.0300 L
Moles of HCl = 0.0300 mol
Since the moles of HCl required to react completely with Fe are 0.02 mol and the initial moles of HCl present are 0.0300 mol, we can see that HCl is in excess.
To learn more about mol, follow the link:
https://brainly.com/question/31329389
#SPJ12
Your uestion is incomplete,complete question is:
Fe(s) + 2HCl(aq) ⇒ FeCl₂(aq) + H2(g)
When a student adds 30.0 mL of 1.00 M HCl to 0.56 g of powdered Fe, a reaction occurs according to the equation above. When the reaction is complete at 273 K and 1.0 atm, which of the following is true?
A) HCl is in excess, and 0.100 mol of HCl remains unreacted.
D) 0.22 L of H2 has been produced.
The correct answer is D. I can't figure out why A is wrong.
is the standard enthalpy of combustion of glucose likely to be higher or lower at blood temperature than at 25°c?
The standard enthalpy of combustion of the glucose likely to be the higher at blood temperature than at 25 °C. The value of the enthalpy at normal temperature is - 2803 kJ.
The combustion of the glucose is as follows :
C₆H₁₂O₆ + 6O₂ ----> 6CO₂ + 6H₂O
The standard enthalpy = ∑ product - ∑ reactant
The standard enthalpy =( 6(-393.5) + 6(-285.8) - (-1273))
The standard enthalpy = - 2803 kJ
The change in the enthalpy of the system is when one mole of the substance is completely burnt in the presence of the oxygen or the air at given temperature is known as the enthalpy of combustion.
The standard enthalpy of combustion at blood temperature is higher than the normal temperature.
To learn more about enthalpy here
https://brainly.com/question/29473197
#SPJ4
What is the relationship between the vapor pressure of a liquid and how well it cools by evaporation?
Answer:Transcript A liquid’s vapor pressure is directly related to the intermolecular forces present between its molecules. The stronger these forces, the lower the rate of evaporation and the lower the vapor pressure.
Explanation:
As vapors are produced more from a liquid there will be more cooling effect as vapors are inversely proportional to the boiling point that means lesser the boiling point better will be the evaporation.
Intermolecular forces are the forces present between the molecules and liquid’s vapor pressure is directly related to the intermolecular forces as well . The stronger these forces, the lower the rate of evaporation and the lower the vapor pressure.
Therefore, the relationship between the vapor pressure of a liquid and how well it cools by evaporation is having direct proportionality.
Learn more about evaporation, here:
https://brainly.com/question/5019199?referrer=searchResults
#SPJ2
For each atom in the table below, write down the subshell from which an electron would have to be removed to make a +1 cation, and the subshell to which an electron would have to be added to make a -1 anion. The first row has been completed for you. atom subshell from which electron removed to form +1 cation subshell to which electron added to form -1 anion H 1s 1s Hg Ne K Х $
The subshell to which an electron would have to be added to make a -1 anion.Hg 4f 5d H 1s 1s X 5s 4p Ne 3s 2p K 4s 3p.
The charge of an electron, which is commonly thought to be negative, is equal to and the opposite of the charge of a proton, which is typically thought to be positive. Because there are more electrons than protons in an ion's total charge, the net charge is not zero. An anion is a negatively charged ion that has more electrons than protons compared to a positively charged ion called a cation. Because they have opposing electric charges, cations and anions are drawn to one another by electrostatic force, which makes it easy to create ionic compounds. Atomic ions are distinct from molecular ions, which are composed of two or more atoms and are also known as multi-atom ions.
To know more about anion please refer:
https://brainly.com/question/15578817
#SPJ4
A 2. 45 g sample of calcium completely reacts with oxygen to form 3. 43 g of calcium oxide. What is the mass percent composition of calcium in calcium oxide
The mass percent composition of 2.45 g of calcium in 3.43 g of calcium oxide is 28.54%.
To determine the mass percent composition of calcium in calcium oxide, we can calculate the mass of calcium in the calcium oxide sample and express it as a percentage of the total mass of the sample.
First, let's find the mass of calcium that reacted:
mass of calcium = 3.43 g - mass of oxygen = 3.43 g - (2.45 g - mass of calcium) = 0.98 g
Next, let's find the percent of calcium in the calcium oxide:
mass percent of calcium = (mass of calcium / mass of calcium oxide) x 100%
mass percent of calcium = (0.98 g / 3.43 g) x 100%
mass percent of calcium = 28.54%
So the mass percent composition of calcium in calcium oxide is 28.54%.
Learn more about mass percent composition here: https://brainly.com/question/20393858
#SPJ4
what volume of 0.150 molar hcl is required to neutralize 25.0ml of 0.120 ba(oh)2
Answer: 40 mL
Explanation:
(25/1000) * 120 (2) = 0.0060 Mol of OH- so it needs .0060 mol of H+
.0060 mol/(.150 mol/liter) = .040 Liters
.040 * 100 = 40 mL
The volume of 0.150 molar HCl is required to neutralize 25.0ml of 0.120 Ba(OB)₂ is 0.04 M.
The balanced chemical equation is as :
2 HCl + Ba(OH)₂ → BaCl₂ + 2 H₂O
The molarity of the Ba(OH)₂ = 0.120 M
The volume of Ba(OH)₂ = 25 mL
The moles of the Ba(OH)₂ = 0.120 × 0.025
= 0.003 mol
The 1 mole of the Ba(OH)₂ reacts with the 2 mole of the HCl
The moles of the HCl = 2 × 0.003
= 0.006 mol
The volume of the HCl = moles / molarity
The volume of the HCl = 0.006 / 0.150
= 0.04 M
To learn more about volume here
https://brainly.com/question/14299903
#SPJ4