Find the refractive index of a medium
having a velocity of 1.5 x 10^8*

Answer: The statement that is not an example of convection is (A person gets a suntan on a beach).

Explanation:

There are different modes of heat energy transfer which includes:

--> conduction

--> Radiation and

--> Convection

CONVECTION is a process by which heat energy is transferred in a fluid or air by the actual movement of the heated molecules. The cooler portion of the air surrounding a warmer part exerts a buoyant force on it. As the warmer part of the air moves, it is replaced by cooler air that is subsequently warmed.

Convection in gases is very common and gas expands more than liquid when subjected to high temperature.

--> it is used in bringing about the circulation of fresh air in the room in a process known as ventilation.Here, cool air is constantly being replaced with denser air ( warm air).

-->An electric heater warms a room and Smoke rises above a fire are typical example of convection in gases.

-->Spaghetti is cooked in water: As the water close to the burner warms, it rises to the top and boils. At the same time, cooler water on top moves downward to replace the rising hot water.

--> also the eagle uses convection current to stay afloat in the sky without flapping its wings to conserve energy.

But the option (A person gets a suntan on a beach) is an example of heat transfer through radiation. This is because the sun emits it's rays from the sky down to earth without any material medium unlike others. Therefore, this option is the ODD one out.

Answer:

the relation between the time period of the planet is

T = 2π √[( r1 + r2 )³ / 8GM ]

Explanation:

Given the data i  the question;

mass of sun = M

minimum and maximum distance = r1 and r2 respectively

Now, using Kepler's third law,

" the square of period T of any planet is proportional to the cube of average distance "

T² ∝ R³

average distance a = ( r1 + r2 ) / 2

we know that

T² = 4π²a³ / GM

T² = 4π² [( ( r1 + r2 ) / 2 )³ / GM ]

T² = 4π² [( ( r1 + r2 )³ / 8 ) / GM ]

T² = 4π² [( r1 + r2 )³ / 8GM ]

T = √[ 4π² [( r1 + r2 )³ / 8GM ] ]

T = 2π √[( r1 + r2 )³ / 8GM ]

Therefore, the relation between the time period of the planet is

T = 2π √[( r1 + r2 )³ / 8GM ]

Answer:

Toaster = I = 14.67 A

Frying Pan = 11.83 A

Lamp = 0.71 A

Explanation:

The electric power is given as:

[tex]P = VI\\\\I = \frac{P}{V}[/tex]

where,

I = current

P = Power

V = Voltage = 120 V

FOR TOASTER:

P = 1760 W

Therefore,

[tex]I = \frac{1760\ W}{120\ V}[/tex]

I = 14.67 A

FOR FRYING PAN:

P = 1420 W

Therefore,

[tex]I = \frac{1420\ W}{120\ V}[/tex]

I = 11.83 A

FOR LAMP:

P = 85 W

Therefore,

[tex]I = \frac{85\ W}{120\ V}[/tex]

I = 0.71 A

Answer:

The answer is "151.25 J and -547.64 J".

Explanation:

[tex]u = 0\\\\v = 2.35\ \frac{m}{sec}\\\\d = 5.0 \ m\\\\[/tex]

Using formula:

[tex]v^2 = u^2 + 2 \times a \times d\\\\2.35^2 = 0^2 + 2 \times a \times 5\\\\a = \frac{2.35^2}{10} \\\\[/tex]

   [tex]= 0.55 \ \frac{m}{sec^2}\\\\[/tex]

[tex]F_{net} = m \times a\\\\F_{net} = 55 \times 0.55 = 30.25\ N\\\\[/tex]

Calculating the Work by net force

[tex]W = F_{net}\times d\\\\W = 30.25 \times 5 = 151.25 \ J\\\\[/tex]

The above work is converted into thermal energy.

Now,

[tex]F_{net} = F_p - F_f\\\\F_p = 140 \ N\\\\F_f = u_k\times m \times g = u_k \times 55 \times 9.81\\\\F_f = 539.55 \times u_k\\\\30.25 = 140 - u_k \times 55 \times 9.81\\\\u_k = \frac{(140 - 30.25)}{(55\times 9.81)}\\\\uk = 0.203 = \text{Coefficient of friction}\\\\W_f = -F_f \times d\\\\W_f = -0.203 \times 55 \times 9.81 \times 5\\\\Work\ done\ by\ friction = -547.64 \ J[/tex]

Answer:

the natural length of the spring is 9 cm

Explanation:

let the natural length of the spring = L

For each of the work done, we set up an integral equation;

[tex]5.4 = \int\limits^{21-l}_{15-l} {kx} \, dx \\\\5.4 = [\frac{1}{2}kx^2 ]^{21-l}_{15-l}\\\\5.4 = \frac{k}{2} [(21-l)^2 - (15-l)^2]\\\\k = \frac{2(5.4)}{(21-l)^2 - (15-l)^2} \ \ \ -----(1)[/tex]

The second equation of work done is set up as follows;

[tex]9 = \int\limits^{27-l}_{21-l} {kx} \, dx \\\\9 = [\frac{1}{2}kx^2 ]^{27-l}_{21-l}\\\\9 = \frac{k}{2} [(27-l)^2 - (21-l)^2] \\\\k = \frac{2(9)}{(27-l)^2 - (21-l)^2} \ \ \ -----(2)[/tex]

solve equation (1) and equation (2) together;

[tex]\frac{2(9)}{(27-l)^2 - (21-l)^2} = \frac{2(5.4)}{(21-l)^2 - (15-l)^2}\\\\\frac{2(9)}{2(5.4)} = \frac{(27-l)^2 - (21-l)^2}{(21-l)^2 - (15-l)^2}\\\\\frac{9}{5.4} = \frac{(729 - 54l+ l^2) - (441-42l+ l^2)}{(441-42l+ l^2) - (225 -30l+ l^2)} \\\\\frac{9}{5.4 } = \frac{288-12l}{216-12l} \\\\\frac{9}{5.4 } =\frac{12}{12} (\frac{24-l}{18 -l})\\\\\frac{9}{5.4 } = \frac{24-l}{18 -l}\\\\9(18-l) = 5.4(24-l)\\\\162-9l = 129.6-5.4l\\\\162-129.6 = 9l - 5.4 l\\\\32.4 = 3.6 l\\\\l = \frac{32.4}{3.6} \\\\[/tex]

[tex]l = 9 \ cm[/tex]

Therefore, the natural length of the spring is 9 cm

Answer:

(i)8m/s²(ii)40m/s

Explanation:

according to the formula

½at²=s.

then substituting the data

½a•5²=100

a=8m/s²

v=at=8•5=40m/s

Answer:

(I)

[tex]{ \bf{s = ut + \frac{1}{2} a {t}^{2} }} \\ 100 = (0 \times 5) + \frac{1}{2} \times a \times {5}^{2} \\ 200 = 25a \\ { \tt{acceleration = 8 \: m {s}^{ -2} }}[/tex]

(ii)

[tex]{ \bf{v = u + at}} \\ v = 0 + (8 \times 5) \\ { \tt{final \: velocity = 40 \: m {s}^{ - 1} }}[/tex]

Answer:

idek

Explanation:

Answer:

elastic energy

Explanation:

When a gymnast falls on a trampoline from a height, after coming in contact with the trampoline, both the gymnast and the trampoline start to move down due to the elastic property of the trampoline.

During this stretching of the trampoline there comes a maximum point up to which the trampoline is stretched. At this point, both the kinetic energy and the gravitational potential energy of the gymnast are zero due to zero speed and zero height, respectively.

The only energy stored in the gymnast's body at this point is the elastic potential energy due to stretching of the trampoline. Hence,the correct option is:

elastic energy

Answer:

ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|ਹੈਲੋ, ਇੰਡੀਆ ਦਾ ਆਪਣਾ ਵੀਡੀਓ ਐਪ - ਰੋਪੋਸੋ ਤੇ Manjeet Warval ਦਾ ਵੀਡੀਓ ਦੇਖੋ | ਨਾਲ ਹੀ PM ਮੋਦੀ ਦੇ 'ਵੋਕਲ ਫ਼ਾਰ ਲੋਕਲ' ਮੋਹਿਮ ਨੂੰ ਸਫ਼ਲ ਬਣਾਉਣ ਲਈ ਰੋਪੋਸੋ ਤੇ 5 ਕਰੋੜ ਤੋਂ ਜ਼ਿਆਦਾ ਭਾਰਤੀਆਂ ਦੇ ਨਾਲ ਜੋੜੋ| ਹੁਣੇ ਰੋਪੋਸੋ ਐਪ ਡਾਊਨਲੋਡ ਕਰੋ ਅਤੇ 100 ਕੋਇਨਜ਼ ਪਾਣ ਲਈ 24 ਘੰਟੇ ਦੇ ਅੰਦਰ ਸਾਇਨ ਅੱਪ ਕਰੋ|

Explanation:

The 2 capacitors in the middle are connected in parallel so simply add their capacitance together:

[tex]5.0\:\mu\text{F} + 8.0\:\mu\text{F} = 13.0\:\mu \text{F}[/tex]

Now we have 3 capacitors connected in series so their equivalent capacitance [tex]C_{eq}[/tex] is

[tex]\dfrac{1}{C_{eq}} = \dfrac{1}{10.0\:\mu \text{F}} + \dfrac{1}{13.0\:\mu \text{F}} + \dfrac{1}{9.0\:\ mu \text{F}} [/tex]

or

[tex]C_{eq} = 3.5\:\mu \text{F}[/tex]

Answer:

(a) 1 : 2

(b) same

Explanation:

Let the mass of puck A is m and the mass of puck B is 2 m.

initial speed for both the pucks is same as u and the distance is same for both is s.

let the tension is T for same.

The kinetic energy is given by

[tex]K = 0.5 mv^2[/tex]

(a) As the speed is same, so the kinetic energy depends on the mass.

So, kinetic energy of A : Kinetic energy of B = m : 2m  = 1 : 2

(b) A the distance s same so the final velocities are also same.

(a)  The kinetic energy of puck B is 2 times the kinetic energy of puck A.

(b)  The final speed of both the puck A and B are same.

Let the mass of puck A is m and the mass of puck B is 2 m.

Initial speed for both the pucks is same as u and the distance is same for both is s.

Let the tension is T for same.

Then, the kinetic energy is given as,

[tex]KE = \dfrac{1}{2}mv^{2}[/tex]

(a)

As the speed is same, so the kinetic energy depends on the mass.

Then,

[tex]\dfrac{KE_{A}}{KE_{B}} = \dfrac{1/2 \times mv^{2}}{1/2 \times (2m)v^{2}}\\\\\\\dfrac{KE_{A}}{KE_{B}} =\dfrac{1}{2}[/tex]

So, kinetic energy of A : Kinetic energy of B = 1 : 2.

Thus, we can conclude that the kinetic energy of puck B is 2 times the kinetic energy of puck A.

(b)

The final speed for the puck is given as,

v = s/t

here, s is the distance covered.

Since, both pucks are pulled the same distance across frictionless ice. Then, the final speed of each puck is also same.

Thus, we can conclude that the final speed of both the puck A and B are same.

learn more about the kinetic energy here:

https://brainly.com/question/12669551

Speed= distance/time

Or time = distance/speed

According to your question

Speed=15m/s

and. Distance=1.2km. ,we must change kilometer in meter because given speed is in m/s

D= 1.2km = 1.2×1000m =1200meter

Time = distance/ speed

1200/15 =80second

Or. 1min and 20 sec will be your answer.

Answer:

F/2

Explanation:

In the first case, the two charges are Q1 and Q2 and the distance between them is r. K is the Coulomb's constant

Hence;

F= KQ1Q2/r^2 ------(1)

Where the charge on Q1 is doubled and the distance separating the charges is also doubled;

F= K2Q1 Q2/(2r)^2

F2= 2KQ1Q2/4r^2 ----(2)

F2= F/2

Comparing (1) and (2)

The magnitude of force acting on each of the two particles is;

F= F/2

Answer:

0.3 N

Explanation:

Electromagnetic force is F= Kq1q2/r^2, where r is the distance between charges. If r is doubled then the force will be 1/4F which is 0.3 N.

The magnitude of the force exerted on Q by q when the distance between them is doubled is 0.3 N

F = Kq₁q₂ / r²

Where

From Coulomb's law,

F = Kq₁q₂ / r²

Cross multiply

Fr² = Kq₁q₂

Kq₁q₂ = constant

F₁r₁² = F₂r₂²

With the above formula, we can obtain the final force as follow:

F₁r₁² = F₂r₂²

1.2 × r² = F₂ × (2r)²

1.2r² = F₂ × 4r²

Divide both side by 4r²

F₂ = 1.2r² / 4r²

F₂ = 0.3 N

Learn more about Coulomb's law:

https://brainly.com/question/506926

Answer:

non biodegradable

Explanation:

It is non biodegradable because plastic cannot dispose off easily ..

Explanation:

https://tse2.mm.bing.net/th?id=OGC.b52c959ac810db1177599a161631c917&pid=Api&rurl=https%3a%2f%2fupload.wikimedia.org%2fwikipedia%2fcommons%2fthumb%2ff%2ff5%2fLight_dispersion_conceptual_waves.gif%2f266px-Light_dispersion_conceptual_waves.gif&ehk=TdcWPzr5xGP8xUOSOqZXauGOS1jHDMu7WnxPzkl7esw%3d

Answer:

The correct answer is "[tex]4.49\times 10^{10} \ joules[/tex]".

Explanation:

According to the question,

The work will be:

⇒ [tex]Work=-\frac{kQq}{R}[/tex]

              [tex]=-\frac{1}{4 \pi \varepsilon \times (18-30)\times 3\times 0.2}[/tex]

              [tex]=-\frac{1}{4 \pi \varepsilon \times (-12)\times 3\times 0.2}[/tex]

              [tex]=\frac{0.3978}{\varepsilon }[/tex]

              [tex]=4.49\times 10^{10} \ joules[/tex]

Thus the above is the correct answer.    

We have that the workdone  is mathematically given as

W=4.49*10e10 J

From the question we are told

Generally the equation for the workdone   is mathematically given as

W=-kQq/R

Therefore

0.3978/ε0 =-1/(4πε0*(18-30)*3*0.2

Hence

For more information on Charge visit

https://brainly.com/question/9383604

Complete question is;

A point charge is positioned in the center of a hollow metallic shell of radius R. During four experiments the value of point charge and charge of the shell were respectively:

+5q; 0

-6q; +2q

+2q; -3q

-4q; +12q

Rank the results of experiments according to the charge on the inner surface of the shell, most positive first:

a. 2, 3, 1, 4

b. 1, 2, 3, 4

c. 2, 4, 3, 1

d. 1, 3, 4, 2

Answer:

c. 2, 4, 3, 1

Explanation:

In this question, we can say that;

q_in = q_b

Where;

q_in is the charge on the inner surface of the shell

q_b is the point charge on the shell.

Thus q_in = -q_b was written because, as the shell is conducting, it means that the electric field would have a value of zero and thus the radius inside will be zero.

Thus;

- For +5q; 0:

q_in = -(+5q)

q_in = -5q

- For -6q; +2q :

q_in = - (-6q)

q_in = +6q

- For +2q; -3q :

q_in = -(+2q)

q_in = -2q

- For -4q; +12q:

q_in = -(-4q)

q_in = +4q

Ranking the most positive to the least positive ones, we have;

+6q, +4q, -2q, -5q

This corresponds to options;

2, 4, 3, 1

Answer:

Wheel and axle

Explanation:

Which simple machine is shown in the diagram?

a wheel and axle

From the given diagram, the machine shown is actually a wheel and axle

Description of wheel and axle

The wheel and axle is a machine consisting of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred from one to the other.

Answer:

Wheel and axle

Explanation:

Answer:

17.07 kJ

Explanation:

The work done against gravity by the man W equals the potential energy change of the man and can of paint, ΔU

W = ΔU = mgΔy where m = mass of man and can of paint = 200 lb + 10 lb = 210 lb = 210 × 1 kg/2.205 lb, g = acceleration due to gravity = 9.8 m/s² and Δy = height of silo = 60 ft = 60 × 1m/3.28 ft

Since W = mgΔy, we substitute the values of the variables into the equation.

So,

W = mgΔy

W = 210 lb × 1 kg/2.205 lb × 9.8 m/s² × 60 ft × 1m/3.28 ft

W = 123480/7.2324 J

W = 17073.2 J

W = 17.0732 kJ

W ≅ 17.07 kJ

Answer:

(7.115 ; 13.405)

Explanation:

Given :

Sample size, n = 22

Mean bill, μ = 10.26

Standard deviation, s = 5.21

To obtain the 99% confidence interval for the mean bill of all orders ;

Mean ± margin of error

Margin of Error = Tcritical * s/√n

Tcritical at 99%, df = n-1, 22 - 1 = 21

Tcritical = 2.831

Margin of Error = 2.831 * (5.21/√22) = 3.145

Confidence interval = 10.26 ± 3.145

Lower boundary = 10.26 - 3.145 = 7.115

Upper boundary = 10.26 + 3.145 = 13.405

Confidence interval :

(7.115 ; 13.405)

Answer:

Scalar quantity is the Physical quantity expresed only by their magnitude.

Answer:

The highest point in the trajectory occurs at the midpoint of the path. This highest point increases as the angle increases. At a 75° launch angle, the maximum height is approximately 76 meters. However, a further increase in launch angle beyond this 75° angle will increase the peak height even more.

Answer:

Explanation:

Apply law of conservation of momentum along y-axis.

Initially there was no momentum along y-axis. So there will be nil momentum along y-axis again finally.

Let the mass of each piece after breaking be m .

Momentum of piece moving along positive y-axis

= m x 10 = 10m .

Let the component of velocity of third piece along y-axis be v .

Its momentum along the same direction = m v .

Total momentum along y -axis = 10 m + m v

According to law of conservation of momentum

10 m + mv = 0

v = - 10 m/s .

Component of velocity of the third piece along y-axis will be - 10 m/s .

In other words it will be along negative y-axis with speed of 10 m/s.

Answer:

The angle is 16 degree.  

Explanation:

A uniformly charged infinite plane, density σ = 4.10-9 C/cm2, is placed vertically in air. A small ball of mass 8 g, with charge q = 10-8 C, hangs close to the plane, so that the string is initially parallel to the plane. Take g = 9.8m/s2 . In equilibrium, by what angle does the string hanging from the ball make an angle with the plane?

Surface charge density, σ = 4 x 10^-5 C/m^2

charge, q = 10^-8 C

mass, m = 0.008 kg

The electric field due to the plate is

[tex]E= \frac{\sigma }{2\varepsilon 0}[/tex]

Let the angle make with the vertical is A and T is the tension in the string.

[tex]T sin A = q E....(1)\\\\T cos A = m g .... (2)\\\\Divie (1) by (2)\\\\tan A =\frac{q E}{m g}\\\\tan A = \frac{10^{-8}\times 4\times 10^{-5}}{2\times 8.85\times 10^{-12}\times 0.008\times9.8}\\\\tan A = 0.288\\\\A = 16 degree\\[/tex]

By the work-energy theorem, the total work done on the mass by the spring is equal to the change in the mass's kinetic energy:

W = ∆K

and the work done by a spring with constant k as it gets compressed a distance x is -1/2 kx ²; the work it does is negative because the restoring force of the spring points opposite the direction in which it's getting compressed.

So we have

-1/2 k (0.15 m)² = 0 - 1/2 (2.0 kg) (3.0 m/s)²

Solve for k to get k = 800 N/m.

Answer:

The frequency of the second wave is half of the frequency of first one.

Explanation:

The wavelength of the second wave is double is the first wave.

As we know that the frequency is inversely proportional to the wavelength of the velocity is same.

velocity = frequency x wavelength

So, the ratio of frequency of second wave to the first wave is

[tex]\frac{f_2}{f_1} =\frac{\lambda _1}{\lambda _2}\\\\\frac{f_2}{f_1} =\frac{\lambda _1}{2\lambda _1}\\\\\frac{f_2}{f_1} =\frac{1}{2}\\\\[/tex]

The frequency of the second wave is half of the frequency of first one.

Answer:

See explanation

Explanation:

a) maximum height of a projectile = u sin^2θ/2g

H= 600 × (sin 30)^2/2 × 10

H= 7.5 m

b) Time of flight

t= 2u sinθ/g

t= 2 × 600 sin 30/10

t= 60 seconds

Range

R= u^2sin2θ/g

R= (600)^2 × sin2(30)/10

R= 31.2 m

Distance travelled by a body in unit time is called speed. it is a scalar quantity because it can be specified only by magnitude.

Answer:

Option (d).

Explanation:

According to the Boyle's law, for a given mass of a gas, the pressure of the gas is inversely proportional to the volume of the gas keeping the temperature of the gas is constant.

So,

Let the pressure is P, volume is V and T is the absolute temperature of the gas.

Pressure proportional to the reciprocal of the volume.

[tex]P \alpha \frac{1}{V}\\\\P V = constant[/tex]

The correct option is (d).

The final speed of the ball is 91.72 m/s.

Given the following data:

To find the final speed of the ball, we would use the following formula:

[tex]F = \frac{M(V - U)}{t}[/tex]

Where:

Substituting the parameters into the formula, we have;

[tex]15000 = \frac{0.145(V \;- \;40)}{0.0005}\\\\15000(0.0005) = 0.145(V \;- \;40)\\\\7.5 = 0.145V - 5.8\\\\0.145V = 7.5 + 5.8\\\\0.145V = 13.3\\\\V = \frac{13.3}{0.145}[/tex]

Final speed, V = 91.72 m/s

Therefore, the final speed of the ball is 91.72 m/s.

Read more here: https://brainly.com/question/24029674