The pOH of a 0.2 m HCl solution is 13.3.
What is concentration?Concentration is the ability to focus on a particular task or activity, blocking out distractions and using cognitive resources efficiently. It is a key factor in achieving success in any area, whether it be in school, the workplace, sports, or leisure activities. Concentration requires a person to be able to pay attention to a specific task over a long period of time, while blocking out irrelevant or competing stimuli.
It also involves the ability to sustain focus and effort, even when faced with challenging or tedious tasks. Developing concentration skills can be beneficial in many aspects of life, including improved academic performance, increased productivity, better decision-making, and better problem-solving skills. Practicing mindfulness, taking regular breaks, and organizing tasks can all help to improve concentration.
pH=-log10[H+]
pH=-log10[0.2]
pH=0.7
You can then enter this into the equation
pH + pOH = 14
placing our pH value into this we get
0.7 + pOH = 14
You can rearrange this to find
pOH = 14–0.7
which means
pOH=13.3
To learn more about concentration
https://brainly.com/question/28564792
#SPJ4
Hydrogen produced from a hydrolysis reaction was collected over water. The data is compiled in the table.
Total volume of H2(g) collected 94.00 mL
Temperature 26.0 °C
Barometric pressure 745 mmHg
Vapor pressure of water at 26.0 ° 25.5 mmHg
Calculate the moles of hydrogen gas produced by the reaction.
Which of the following statements about atoms and
subatomic particles is true?
A. The nucleus of an atom has no mass.
B. Neutrons are negatively charged.
C. Electrons exist in the nucleus.
D. The nucleus makes up most of the mass of an atom.
E. A cation has more electrons than protons.
Modify each incorrect statement to make it correct.
statements about atoms and subatomic particles is true A cation has more electrons than protons.
Why is it called a subatomic particle?Protons, neutrons and electrons are all called subatomic particles because they are smaller particles that make up atoms. The prefix "sub" means beneath, or smaller. Since these particles are "sub"-atomic, this means they are smaller than atoms. Atoms have a nucleus made of protons and neutrons stuck together.
What are subatomic made of?Subatomic particles include electrons, the negatively charged, almost massless particles that nevertheless account for most of the size of the atom, and they include the heavier building blocks of the small but very dense nucleus of the atom, the positively charged protons and the electrically neutral neutrons.
To know more about subatomic visit
https://brainly.com/question/13303285
#SPJ1
The following compounds, listed with their boiling points, are liquid at -10oC: butane, -0.5oC; ethanol, 78.3 oC; toluene, 110.6 oC. At -10 oC, which of these liquids would you expect to have the highest vapor pressure? Which the lowest? Explain.
Butane, -0.5°C has the highest vapor pressure.Toluene, 110.6°C has the lowest vapor pressure.
What is vapor pressure ?The equilibrium pressure of a vapor above its liquid (or solid) is the vapor pressure of a liquid (or solid); that is, the pressure of the vapor resulting from evaporation of a liquid (or solid) above a sample of the liquid (or solid) in a closed container.
As a result, the substance with the lowest boiling point will have the highest vapor pressure at room temperature. The substance with the lowest vapor pressure has the highest boiling point.
Thus, Butane, -0.5°C has the highest vapor pressure.Toluene, 110.6°C has the lowest vapor pressure.
To learn more about the vapor pressure, follow the link;
https://brainly.com/question/11864750
#SPJ1
What is the weighted average length of the nails in the drawer?
A. 350 cm
B. 333 cm
C. 5.00 cm
D. 3.50 cm
The weighted average length of the nails in the drawer can be found to be D. 3. 50 CM.
How to find the weighted average ?Multiply each number by its weight, then add the results to determine the weighted average. Find the sum of all the variables multiplied by their weight, then divide by the sum of the weights if the weights don't add up to one.
In formula form, this is:
= ∑ ( Percentage of abundance x Length of nail )
The weighted average length of nails is:
= ( 2. 50 x 70. 5%) + ( 5. 00 x 19. 0 %) + ( 7. 50 x 10. 5 % )
= 3. 50 cm
Find out more on weighted average at https://brainly.com/question/28507971
#SPJ1
In the titration of 25.00 mL of a water sample, it took 19.840 mL of 4.395x10-3 M EDTA solution to reach the endpoint.
Calculate the number of moles of EDTA required to titrate the water sample. (enter your answer with 3 significant figures)
The total hardness is due to one or a combination of Ca2+, Mg2+, and Fe2+ in your sample. It is convenient to express this hardness as though it was entirely due to Ca2+. Making this assumption, determine the number of moles of Ca2+ present in the bottled water sample titrated. (enter your answer with 3 significant figures)
The total hardness is always listed in parts-per-million (ppm) of CaCO3 (or mg CaCO3 / Kg H2O). Since the density of water is 1.0 g/mL, one ppm would be the same as the number of mg of CaCO3 per liter of water. Determine the number of moles of CaCO3 present in the titrated sample of water, assuming that all the Ca2+ combines with CO32−. (enter your answer with 3 significant figures)
Calculate the number of grams of CaCO3 present and convert to mg. (enter your answer with 3 significant figures)
The number of grams of CaCO3 present and converted to mg is 348.787 mg.
What is EDTA ?Ethylenediaminetetraacetic acid (EDTA) is an organic compound used in a variety of applications, including industrial, medical, and food-related. EDTA is a white, crystalline powder, and is often referred to as a chelating agent due to its ability to bind and sequester various metal ions. This property makes it useful in a wide range of industries, including food processing, water treatment, paper manufacturing, and metalworking. In the medical field, EDTA is used to treat heavy metal toxicity, as it has the capability to bind to the metal ions, rendering them harmless to the body. EDTA is also found in many food products, as it serves as a preservative and stabilizing agent.
we know that
moles = concentration x volume (ml) / 1000
so
moles of EDTA = 4.395 x 10-3 x 19.84 / 1000
moles of EDTA = 8.71968 x 10-5
now
moles of Ca+2 = moles of EDTA
so
moles of Ca+2 = 8.71968 x 10-5
now
Ca+2 + C032- ---> CaC03
so
moles of CaC03 = moles of Ca+2
so
moles of CaC03 = 8.71968 x 10-5
now
mass = moles x molar mass
molar mass of CaC03 = 100 g /mol
so
mass of CaC03 = 8.71968 x 10-5 x 100
mass of CaC03 = 8.71968 x 10-3 g
mass of CaC03= 8.71968 mg
now
volume of water = 25 ml = 25 x 10-3 L
so
ppm = 8.71968 / 25 x 10-3
ppm = 348.787
sp
ppm of CaC03 is 348.787
So, The number of grams of CaCO3 present and converted to mg is 348.787 mg.
To learn more about EDTA
https://brainly.com/question/4304901
#SPJ4
what is the most efficient way to make a hepes buffer at ph 8.5? what starting compounds and reagents will you use? hint: start by choosing the right h-h equation. calculate from pka etc.
The most efficient way to make a herpes buffer at ph 8.5 is 7.55.
In chemistry, a compound is a substance made up of or greater different chemical elements combined in a fixed ratio. while the elements come collectively, they react with every other and shape chemical bonds which can be difficult to interrupt. those bonds form due to sharing or replacing electrons between atoms.
A chemical compound is a chemical substance composed of many equal molecules containing atoms from a couple of chemical elements held collectively by using chemical bonds. A molecule along with atoms of the most effective one detail is consequently not a compound. A compound is a material composed of or greater additives. Water, carbon dioxide, and desk salt are some examples of compounds.
To learn more about Compound visit here:
brainly.com/question/13516179
#SPJ4
The volume of a sample of mercury was determined to be 13.77 cm³. What is the
volume of this sample reported in cubic inches?
The volume of the sample reported in cubic inches would be 0.84 [tex]in^3[/tex].
Unit conversionThe problem here has to do with converting from cm³ to [tex]in^3[/tex].
1 cm = 0.3937 inch
1 cm³ = 0.0610 [tex]in^3[/tex]
Thus, if
1 cm³ = 0.0610 [tex]in^3[/tex]
13.77 cm³ = 13.77 x 0.0610/1
= 0.84 [tex]in^3[/tex]
In other words, the volume of mercury determined to be 13.77 cm³ will be 0.83 reported in cubic inches.
More on unit conversion can be found here: https://brainly.com/question/19420601
#SPJ1
NEED HELP WITH STOICHIOMETRY.
Lithium and oxygen react explosively to form lithium oxide. Write a balanced equation for this reaction (4Li+ 02-->Li_20 ) . Then calculate how many moles of lithium oxide will form if 1.68 mol of lithium are reacted with oxygen.
Answer:
0.42 moles
Explanation:
Use Stoichiometry to solve
[tex]\frac{1.68 moles-of-Li}{} *\frac{1 mole-of-Li2O}{4 mole-of Li} =0.42 moles[/tex]
For the following reaction, 3.59 grams of carbon tetrachloride are mixed with excess methane (CH4) . Assume that the percent yield of dichloromethane (CH2Cl2) is 65.5 %.What is the ideal yield of dichloromethane (CH2Cl2) ? What is the actual yield of dichloromethane (CH2Cl2)
The balanced chemical equation for the reaction is:
CCl4 + CH4 → 2CH2Cl2
From the balanced equation, we see that 1 mole of CCl4 reacts with 1 mole of CH4 to produce 2 moles of CH2Cl2.
To determine the theoretical yield of CH2Cl2, we need to convert the given mass of CCl4 to moles, using its molar mass:
Molar mass of CCl4 = 12.01 + 4(35.45) = 154.02 g/mol
Moles of CCl4 = 3.59 g / 154.02 g/mol = 0.0233 mol
Since 1 mole of CCl4 produces 2 moles of CH2Cl2, the theoretical yield of CH2Cl2 is:
Theoretical yield of CH2Cl2 = 2 × 0.0233 mol = 0.0466 mol
To determine the actual yield of CH2Cl2, we need to use the percent yield:
Percent yield = (actual yield / theoretical yield) × 100%
Rearranging this formula gives:
Actual yield = (percent yield / 100%) × theoretical yield
Substituting the given values, we get:
Actual yield = (65.5% / 100%) × 0.0466 mol = 0.0305 mol
Finally, we can convert the actual yield of CH2Cl2 to grams, using its molar mass:
Molar mass of CH2Cl2 = 12.01 + 2(35.45) = 84.93 g/mol
Mass of CH2Cl2 = 0.0305 mol × 84.93 g/mol = 2.59 g
Therefore, the ideal yield of CH2Cl2 is 0.0466 mol or 3.97 g, and the actual yield is 0.0305 mol or 2.59 g.
1) If an ideal gas has a pressure of 6.83 atm, a temperature of 475 K, and a volume of 60.47 L, how many moles of gas are in the sample?
2) Solid ammonium chloride, NH4Cl, is formed by the reaction of gaseous ammonia, NH3, and hydrogen chloride, HCl.
NH3(g)+HCl(g)⟶NH4Cl(s)
A 6.00 g sample of NH3 gas and a 6.00 g sample of HCl gas are mixed in a 2.00 L flask at 25 ∘C.
How many grams of NH4Cl will be formed by this reaction?
When 25.00 mL of an unknown weak base is titrated with 0.122 M HCI, it takes 32.42 mL to reach the equivalence point. Reference Material pH = -log[H") (H+) = 10 pk = -log K K = 10 X pOH = -log(OH) (OH) = 10-POH pk = -log K K = 10pk Molar Mass HCI 36.458 g/mol The ionic product of water = Kw = [H] x [OH-] = 1.0 x 10-14 at 298 K. The expression varies with temperature a) What is the concentration, in M, of the weak base? Enter a number only, no text. b) At half-equivalence point, the pH is 11.58. What would be the Kb of the weak base? Enter a number only, no text 101
a) The concentration of the weak base is 0.0424 M.
b) The Kb of the weak base is 1.29 x 10^-12.
At the equivalence point, the number of moles of HCl added to the solution is equal to the number of moles of the weak base present in the solution.
So, we can calculate the number of moles of HCl that have been added to the solution:
Moles HCl = (0.122 M) * (0.03242 L)
= 0.003987 moles
To find the concentration of the weak base, we divide the number of moles of the weak base by the volume of the solution:
Concentration weak base = Moles weak base/volume
= (0.003987 moles) / (0.025 L) = 0.0424 M
At the half-equivalence point, the number of moles of HCl added to the solution is equal to half the number of moles of the weak base present in the solution.
So, we can calculate the number of moles of HCl that have been added to the solution:
Moles HCl = (0.122 M) * (0.03242 L) / 2 = 0.001994 moles
To find the concentration of the weak base, we divide the number of moles of the weak base by the volume of the solution:
Concentration weak base = Moles weak base/volume
= (0.001994 moles) / (0.025 L) = 0.0808 M
The concentration of the conjugate acid of the weak base can be calculated using the equation:
[H+] = Kw / [OH-] = (1.0 x 10^-14) / (0.0808 M)
= 1.235 x 10^-14 M
The pH of the solution can be calculated using the equation:
pH = -log[H+] = 11.58
The Kb of the weak base can be calculated using the equation:
Kb = Kw / [HA][A-] = (1.0 x 10^-14) / (0.0808 M) (0.0808 M)
= 1.29 x 10^-12
Learn more about conjugate acid here:
https://brainly.com/question/22514615
#SPJ4
Anyone please help. Will greatly appreciate it.
Th overall reaction is an exothermic reaction where the energy of products is higher than that of reactants, the bonds in products being stronger and the change in enthalpy is positive.
What is an exothermic reaction?An exothermic reaction is defined as a chemical reaction which involves release of energy in the form of light,heat .In these reactions, energy is transferred from system to surroundings rather than taking energy from surroundings into system as in endothermic reactions.
In an exothermic reaction,change in enthalpy is negative.Therefore, it can be inferred that net amount of energy which is required to start the exothermic reaction is less than the net amount which is released by the reaction.
Learn more about exothermic reaction,here:
https://brainly.com/question/10373907
#SPJ1
How many grams of diphosphorus trioxide, P2O3 will form if one uses 78 grams of oxygen?
Answer:
approximately 137.3 grams of P2O3 will form if one uses 78 grams of oxygen.
Explanation:
Diphosphorus trioxide, P2O3, is formed from the reaction of phosphorus with oxygen:
P4 + 5O2 -> 2P2O3
To determine how many grams of P2O3 will form from 78 grams of oxygen, we need to know how much phosphorus is also involved in the reaction. If we assume that there is enough phosphorus present, then we can calculate the amount of P2O3 that will be produced.
The balanced equation tells us that for every 2 moles of P2O3 that are produced, 4 moles of P4 and 5 moles of O2 are consumed. From the number of moles of O2, we can calculate the number of moles of P2O3 produced using the ratio from the balanced equation:
78 g O2 / (32 g/mol O2) = 2.43 mol O2
2.43 mol O2 * (2 mol P2O3 / 5 mol O2) = 0.972 mol P2O3
Finally, we can convert the number of moles of P2O3 to grams:
0.972 mol P2O3 * (141.94 g/mol P2O3) = 137.3 g P2O3
So, approximately 137.3 grams of P2O3 will form if one uses 78 grams of oxygen.
When a sugar cube dissolves in coffee, it is an example of which of the following?A. a physical changeB. a chemical changeC. a change in an extensive propertyD. none of the above
Option (A) is correct. When a sugar cube dissolves in coffee, it is an example of physical change.
Dissolving sugar cubes in coffee, the sugar molecules dissolve in the liquid without undergoing any chemical reaction as the chemical bonds in the molecules of sugar are covalent. The sugar molecule does not react with coffee molecules. Dissolving some substances such as sodium chloride in water is a chemical reaction as the chemical composition of the reactant would change. Physical change is defined as the state of the matter where the physical state of a matter is changed. The composition of the substance does not change. The products can be reversed by physical means in case of physical change.
To learn more about Physical change please visit:
https://brainly.com/question/960225
#SPJ4
calculate and report the formula weight for the phosphate ion and calcium phosphate
The weight of a calcium phosphate molecule is 310 amu. Phosphate ion's formula weight is 95 amu.
How can the weight in the formula be determined?
There are 3 calcium molecules, 2 phosphate atoms, and 8 oxygen atoms in calcium phosphate.
The white solids known as calcium phosphates have nutritional value and are present in many living things, such as bone mineral and tooth enamel. Colloidal calcium phosphate (CCP), which is found in milk in micelles bound to casein protein and exists in a colloidal form, is also known as calcium phosphate.
Ca = 3 x 40 = 120 amu
in which P=231=62 amu
for O=8×16=128
So, 310 amu is the total weight.
Phosphate is a
P = 131 = 31 amu
O = 416 = 64 amu
Thus, 95 amu is the total weight.
To know more about calcium phosphate, check out:
brainly.com/question/29231164
#SPJ1
Predict the missing component in the nuclear equation.
Answer:
my guess is A.
Explanation:
The diagram below shows a stack of rock layers. These layers have not changed position since they formed.
The fossils in Layer 2 are younger than those in Layer __ and older than the fossils in Layer __
Answer: The fossils in Layer 2 are younger than those in Layer 1, and older than the fossils in layer 3. (assuming layer 1 is at the bottom, and layer 3 is at the top.)
Explanation: Think of how this stack of rocks formed. Layer 1 would have deposited first along with it's fossils, followed by 2, 3, etc. Layer 2's fossils would be younger than Layer 1, but older than Layer 3.
The average kinetic energy of the molecules in a gas sample depends only on the temperature, . However, given the same kinetic energies, a lighter molecule will move faster than a heavier molecule, as shown in the equation for rms speed
rms speed=3ℳ‾‾‾‾‾√
where =8.314 J/(mol⋅K) and ℳ is molar mass in kilograms per mole. Note that a joule is the same as a kilogram‑meter squared per second squared (kg·m2/s2).
What is the rms speed of O2 molecules at 433 K?
What is the rms speed of He atoms at 433 K?
483 m/s is the rms speed of O[tex]_2[/tex] molecules at 433 K. The average kinetic energy of the molecules in a gas sample depends only on the temperature.
What is speed?Speed may be defined as the distance traveled by an item in relation to the time it takes to travel that distance. In other words, it measures how rapidly an item travels but does not provide direction. The term "velocity" refers to the combination of direction and speed.
The SI unit system is most typically used to express speed. Rate is given in metres per second, or m/s, since distance is recorded in metres while time is recorded in seconds. Unit representation: The speed is represented by "s" and calculated in meters per second (ms-1).
Vrms= √3RT/M
substituting all the given values, we get
Vrms= √3×8.314×433/0.032=483 m/s
Therefore, 483 m/s is the rms speed of O[tex]_2[/tex] molecules at 433 K.
To learn more about speed, here:
https://brainly.com/question/28224010
#SPJ1
The volume of a sample of mercury was determined to be 13.77 cm'. What is the volume of this sample reported in cubic inches?
The volume of the mercury sample reported in cubic inches is
0.8435 cubic inches.How to convert the volumeThe conversion factor between cubic centimeters and cubic inches is
1 cm^3 = 0.0610237441 in^3.
To convert the volume of 13.77 cm^3 to cubic inches, multiply by this conversion factor:
13.77 cm^3 * 0.0610237441 in^3/cm^3 = 0.8435 in^3
Therefore, the volume of the sample of mercury is 0.8435 cubic inches.
Learn more about mercury at:
https://brainly.com/question/24257702
#SPJ1
how many moles of sodium hydroxide are needed to produce 6.0 moles of calcium hydroxide according to the reaction below?
There would be 12 moles of sodium hydroxide are needed to produce 6.0 moles of calcium hydroxide.
First we should write the balance chemical reaction
CaCl₂ + 2NaOH → Ca(OH)₂ + 2NaCl
From the chemical reaction we know that 1 moles of CaCl₂ react with 2 moles NaOH produced 1 moles of calcium hydroxide and 2 moles of NaCl.
To calculated moles of sodium hydroxide are needed to produce 6.0 moles of calcium hydroxide we can use unitary method
Moles of NaOH = 2/1 x moles of calcium hydroxide
Moles of NaOH = 2/1 x 6 moles
Moles of NaOH = 12 moles
Therefore, to make 6.0 moles of calcium hydroxide, 12 moles of sodium hydroxide would be required.
Your question is incomplete but most probably your full question was
how many moles of sodium hydroxide are needed to produce 6.0 moles of calcium hydroxide according to the reaction below?
CaCl₂ + 2NaOH → Ca(OH)₂ + 2NaCl
Learn more about moles at https://brainly.com/question/27750645
#SPJ4
Use the following data to calculate the Ksp value for each solid.a. The solubility of CaC2O4 is 6.1 × 10−3 g/L.b. The solubility of BiI3 is 1.32 × 10−5 mol/L.
The solubility product constant (Ksp) of CaC2O4 is given by the equation: Ksp = [Ca₂⁺] x [C₂O₄²⁻] = (6.1 × 10⁻³)² = 3.721 × 10⁻⁵ g²/L².
The solubility product constant (Ksp) of BiI3 is given by the equation: Ksp = [Bi₃⁻] x [I⁻]³ = (1.32 × 10⁻⁵)³ = 2.228 × 10⁻¹⁵ mol³/L³.
The solubility product constant (Ksp) is a measure of the equilibrium between a solute and its saturated solution. It is calculated by multiplying the concentrations of the ions in the solution when the solution is saturated. When the Ksp value is greater than 1, the compound is considered to be soluble in water.
Learn more about the Ksp value:
https://brainly.com/question/25134328
#SPJ4
The density of 70.5 wt% aqueous perchloric acid is 1.67 g/mL. a. How many grams of solution are in 1.000 L? b. How many grams of HClO4 are in 1.000 L? c. How many moles of HClO4 are in 1.000 L?
There would be 1670 g of solution in 1.000 L and 1,177.35 gram of HClO₄ are in 1.000 L. There are 11.72 moles of HClO₄ in 1 L.
There are 1000 mL in a liter, hence density indicates the amount of grams per mL.
Density =1.67 g / 1 mL = 1670 g / 1000 mL = 1670 g/ 1.0 L
so there would be 1670 g of solution in 1.000 L
We got aqueous perchloric acid 70.5 wt%, it means the amount of perchloric acid in 100 grams of solution is 70.5 grams. so mass of HClO₄ are in 1.000 L will be
mass of HClO₄ = 70.5% x1670 g/ 1.0 L = 1,177.35 gram
Moles of HClO₄ = mass / mass molar
Moles of HClO₄ = 1,177.35 gram/ 100.46 g/mol = 11.72 moles
Learn more about mass at https://brainly.com/question/14437268
#SPJ4
Reaction Of Ethylmagnesium Bromide With Which Of The Following compound yields a tertiary alcohol after quenching with aqueous acid?A.H2COB.ch3choC.(ch3)2coD.ethylene oxideE.n-buthylitium
The reaction of ethyl magnesium bromide with ethylene oxide would yield a tertiary alcohol after quenching with aqueous acid. Option D is correct.
Ethyl magnesium bromide is a Grignard reagent that can react with carbonyl compounds to form alcohols. In this reaction, the Grignard reagent adds to the carbon atom in the carbonyl group to form a intermediate that can be quenched with aqueous acid to form an alcohol.
In the case of ethylene oxide, the reaction of ethyl magnesium bromide would result in the formation of a tertiary alcohol. The structure of the intermediate can be represented as follows:
R-Mg-Br + CH₂=O-CH₂-O-CH₂-O → R-O-CH₂-CH₂-O-CH₂-O
After quenching with aqueous acid, the intermediate is protonated to give a tertiary alcohol:
R-O-CH₂-CH₂-O-CH₂-O + H₃O⁺ → R-OH + CH₃-O-CH₂-O-CH₂-OH
To know more about Grignard reagent here
https://brainly.com/question/15876201
#SPJ4
which of the following are ways of describing solution concentrations? mole fraction percent by mass molarity molality all of the above
Mole fraction is the ratio of the number of moles of a component of a solution to the total number of moles of all components in the solution.
What is components ?Components are modular parts of a larger system or structure. They can be physical objects, such as a computer part, or abstract concepts, such as a software algorithm. Components are usually designed to work together in order to achieve a common goal. Components provide a way to break down complex tasks into smaller, manageable pieces. By combining multiple components, the overall system can be more efficient, reliable, and easier to maintain. Components are often reusable, meaning they can be used in multiple different systems or applications.
To learn more about components
https://brainly.com/question/30291912
#SPJ4
Ethanol, CH3CH2OH, is known as grain alcohol and is the alcohol found in alcoholic beverages. Calculate the mole fraction of ethanol in a solution that contains 4.76g of ethanol d
Answer:
Explanation:
To calculate the mole fraction of ethanol we need the number of moles of ethanol (n1) and the total number of moles of all solutes in the solution (n_total).
We know that molar mass of ethanol = 46.07 g/mol
First, we'll find the number of moles of ethanol:
n1 = mass / molar mass
n1 = 4.76 g / 46.07 g/mol
n1 = 0.1029 mol
Next, we'll find the total number of moles of all solutes in the solution:
n_total = n1
Finally, we'll use these values to find the mole fraction of ethanol:
mole fraction of ethanol = n1 / n_total
mole fraction of ethanol = 0.1029 mol / 0.1029 mol
mole fraction of ethanol = 1.00
Therefore, the mole fraction of ethanol in the solution is 1.00.
determine the concentration of solute in an aqueous sodium chloride solution and give the concentration units that your method provides
Measure the volume of solution, evaporate to dryness, measure mass of dried solid. Convert g of salt to moles, divide by volume of solution M and it now can be calculated as
[tex]$ \mathrm{ C_{ion} - C_{compound} \times \frac{n_{ion}}{n_{compund}} }[/tex]
What is chloride?Chloride is an ion that is formed when chlorine is combined with another element, such as sodium or potassium. It is an essential electrolyte in the body and helps regulate fluid balance, nerve conduction, and pH levels. Chloride is found in many foods, including table salt and processed foods, as well as in the body's fluids, such as sweat, saliva, and blood.
Chloride also plays a role in digestion, helping to break down foods. People usually get enough chloride in their diets, but too much can lead to high blood pressure, dehydration, and impaired kidney function. Chloride levels can be tested with a blood test, and abnormal levels may indicate a problem such as dehydration or kidney disease.
To learn more about chloride
https://brainly.com/question/24218286
#SPJ4
a chemical reaction that requires an input of energy in order to proceed is termed ______, whereas one that releases energy is called ______.
A chemical reaction that requires an input of energy in order to proceed is termed Endothermic, whereas one that releases energy is called Exothermic.
The endothermic process is a word used to describe a reaction in which the system takes up heat from its environment. Photosynthesis, evaporating liquids, melting ice, dry ice, alkane cracking, thermal decomposition, ammonium chloride in water, and many more processes are examples of endothermic processes. A reaction that is exothermic is the opposite of one that is endothermic. It emits energy onto its surroundings as heat or light. Examples include neutralization, burning a chemical, fuel reactions, dry ice deposition, respiration, sulphuric acid solution in water, and many more.
to know more about endothermic visit
https://brainly.com/question/23184814
#SPJ4
When solid sodium hydroxide (NaOH) is placed into water the mixture begins to heat up
as the sodium hydroxide dissolves. In a given experiment a mixture of sodium hydroxide
and water had an initial temperature of 22.0 °C. After all the sodium hydroxide
dissolved completely the final temperature of the mixture was 27.2 °C. What is the
change in temperature (in Fahrenheit) of the mixture?
The change in temperature (in Fahrenheit) of the mixture is 41.36°F
What is the change in the temperature of the mixture?The change in the temperature of the mixture is obtained as follows:
The initial temperature of water = 22.0 °C.
The final temperature of the mixture of water and sodium hydroxide = 27.2 °C.
The difference in temperature = 27.2 °C - 22.0 °C.
The difference in temperature = 5.2 °C.
Converting degrees celsius to Fahrenheit:
(5.2°C × 9/5) + 32 = 41.36°F
Therefore, the difference in temperature in Fahrenheit is 41.36°F.
Learn more about celsius to Fahrenheit at: https://brainly.in/question/481880
#SPJ1
classify each solid as a covalent, ionic, metallic, or molecular solid. drag the appropriate items to their respective bins. view available hint(s)for part a resethelp covalentdroppable ionicdroppable metallicdroppable moleculardroppable
The appropriate items to their respective bins are:
Covalent: Carbon dioxide
Ionic: Table salt
Metallic: Iron
Molecular: Sugar
What is bins?
Bins are containers used for storing and organizing items. They can be made from a variety of materials, including wood, metal, and plastic, and come in many shapes and sizes. Bins are often used in large warehouses, retail stores, and other business establishments to store and organize products, tools, and other items. In the home, bins can be used to store toys, shoes, and other items that need to be kept organized.
To learn more about bins
https://brainly.com/question/29634744
#SPJ4
How many grams of sand would you add to a 5.0 mL test tube, that has a mass of 10.0 g if you wanted it to float in the middle of the orange layer? (Don't include units in your answer)
The final mass in gram is (V-5.0)/2 + 10.0 g.
How do we calculate?we need to calculate the mass of the orange layer and add half of that to the 10.0 g test tube to make it float in the middle.
The density of the orange layer can be assumed to be around 1.0 g/mL and we can calculate the volume by subtracting the volume of the test tube (5.0 mL) from the total volume of the mixture.
We make the assumption that the total volume of the mixture is V mL.
Hence, the volume of the orange layer is (V-5.0) mL, and its mass is (V-5.0) g.
Half of the mass = (V-5.0)/2 g
and should be added to the 10.0 g test tube to make it float in the middle.
So in conclusion, the final answer is (V-5.0)/2 + 10.0 g.
Learn more about density at: https://brainly.com/question/1354972
#SPJ1