E) Water's high boiling temperature and molar mass are accounted for by hydrogen bonding.
What three different intermolecular forces of attraction are there?The London dispersion force, the dipole-dipole interaction, and the ion-dipole interaction are the three main categories of intermolecular forces.
What do the forces of attraction between molecules mean?A force that attracts the protons or positive parts of one molecule to the electrons or negative parts of another molecule is known as an intermolecular force. A substance's various physical and chemical properties are influenced by this force.
The forces that attract opposing positive and negative charges when two interacting molecules come into contact are known as intermolecular forces of attraction, or IMFA. These include the London dispersion force, hydrogen bonding, dipole-dipole, and ion-dipole forces.
To learn more about intermolecular forces of attraction here:
https://brainly.com/question/10941007
#SPJ1
Full Question = Hydrogen bonds account for which of the following observation? a) hydrogen naturally exists as a diatomic molecule b) it is easily combustible with oxygen c) water molecules are bent or "v-shaped" d) air is more dense than hydrogen bonds e) for its molar mass, water has a high boiling point
Answer:
E) Water's high boiling temperature and molar mass are accounted for by hydrogen bonding.
an acid ___ .is a solution where the water molecules are intact accepts h and removes them from a solutionreleases h in a solution
An acid is a solution where the water molecules release H+ ions (hydrogen ions) into the solution.
An acid is characterized by its ability to release hydrogen ions (H+) into a solution. When an acid is dissolved in water, it donates hydrogen ions (H+) to the water molecules, making the solution acidic. This is why an acid is often described as a solution that releases H+ ions into the solution.
To know more about acid, visit the link given below:
https://brainly.com/question/14072179
#SPJ4
Which of the following measurements are not equivalent?
a. 84 cm=8.4 mm
b. 24 dL= 2.4 L
c. 183 L= 0.183 kL
d. 25 mg= 0.025 g
e. 150 msec= 0.150 sec
The non-equivalent measurements are:
B. 24 dL ≠ 2.4 L
C. 183 L ≠ 0.183 kL
E. 150 msec ≠ 0.150 sec
What is non-equivalent measurements?
Non-equivalent measurements are measurements that have different values despite being expressed in the same units. For example, 23 dL and 2.3 L are both expressed in liters, but they are not equivalent because 23 dL is a larger unit and 23 L is a smaller unit.
Non-equivalent measurements can occur when different units or prefixes are used, such as milli, kilo, deci, etc. It is important to ensure that the correct units and prefixes are used to avoid incorrect results in calculations and measurements.
Learn more about Non-equivalent measurements here: brainly.com/question/1376612
#SPJ1
To isolate a single variable when rearranging equations, move all other variables to the other side of the equation by using the opposite function on them and remembering to perform that operation on both sides of the equation.
Make sure the rearrangement has the target variable in the numerator, not the denominator.
Yes, that is a good way to isolate a single variable in an equation. You can use the opposite operation (addition or subtraction) to move all the other variables to one side of the equation, and then use division or multiplication to get the target variable by itself.
What are variables?Variable is a symbol in algebra that represents an unknown numerical value in an equation. It is typically a letter. The real numbers x and y, the complex numbers z, the time, the radius, and the arc length are all common variables.
Just make sure to perform the same operation on both sides of the equation to maintain the equality. Also, it is helpful to have the target variable in the numerator and not in the denominator as this makes it easier to solve for the variable.
To know more about Variable, visit:
https://brainly.com/question/17344045
#SPJ4
Glycolysis takes place in the ________ and produces________, which in the presence of O2 then enters the ________.
cytosol; pyruvate; mitochondrion to complete cellular respiration
Glycolysis takes place in the cytosol and produces pyruvate. In the presence of oxygen, pyruvate then enters the mitochondrion to complete cellular respiration.
Glycolysis is the first step of cellular respiration, a process by which cells convert glucose (a simple sugar) into energy. It takes place in the cytosol, which is the liquid portion of the cytoplasm found inside a cell. During glycolysis, glucose is broken down into two molecules of pyruvate, producing a small amount of ATP (adenosine triphosphate) in the process.
Pyruvate, the end product of glycolysis, is then transported into the mitochondria, where it can undergo further processing in the presence of oxygen. The process that takes place in the mitochondria is called the citric acid cycle, which produces a large amount of ATP through oxidative phosphorylation. This ATP is then used by cells for energy to carry out various cellular functions.
Learn more about glycolysis here: https://brainly.com/question/29604117
#SPJ4
The product from your reaction has a sharp melting point, indicating that it is either meso-hydrobenzoin or a racemic mixture of the (1R, 2R) and (1S, 2S) enantiomers. Why is it not possible that your product is either the (1R, 2R) or the (1S, 2S) pure enantiomer?
A sharp melting point is an indication of high molecular homogeneity, meaning the molecules in the sample have a high degree of similarity in their shape and structure.
The product of the reaction has a sharp melting point, indicating that it is either meso-hydrobenzoin or a racemic mixture of the (1R, 2R) and (1S, 2S) enantiomers.
However, it is not possible for the product to be either the (1R, 2R) or the (1S, 2S) pure enantiomer. This is because enantiomers have opposite stereochemistry and cannot be distinguished from each other based on physical properties such as melting point, boiling point, or solubility. Therefore, if the product has a sharp melting point, it must be either meso-hydrobenzoin or a racemic mixture of enantiomers, but it cannot be a pure enantiomer.
In conclusion, a sharp melting point alone is not enough to determine the stereochemistry of the product. Further analysis, such as chiral chromatography or circular dichroism spectroscopy, would be required to determine the absolute configuration of the enantiomers.
Learn more about melting point:
brainly.com/question/29578567
#SPJ4
Estimate the atmospheric pressure at the summit of Mount Everest, 8,848m above sea level. Assume an average temperature of 0 degrees celcius.
The atmospheric pressure at the summit of Mount Everest is 253 mmHg.
M(air) = 0.21x2xM(O) + 0.79x2xM(N) = 29x10^(-3)kg/mole
Assuming that air can be treated as an ideal gas (pV=nRT) express the density of air (ρ) as a function of the other state variables and the molar mass M.
p = pressure
V = volume
R = ideal gas constant
T = temperature
n = the amount of gas, measured in moles
ρ = mass(kg)/V, n=m/M where m is mass measured in kilograms and M is molar mass with units kg/mole. A mole is 6.022x10^23 atoms/molecules.
The ideal gas law rewritten: p(m/ρ)=(m/M)T
Rearranging the variables to write the density in terms of all the other variables we have:
ρ = (M/(RT))p
The hydrostatic equation Δp=ρgΔy describes the change in pressure with depth for an incompressible fluid. This assumption is not valid for air in the atmosphere. Air in the lower parts of the atmosphere is “compressed” by the air above it. However, for an infinitesimally thin layer of air the equation holds.
g = gravitational acceleration (on Earth=9.8 m/s^2)
Δy = a difference in vertical distance
Δp = a difference in pressure between the interval in distance
We do not want the change in pressure, we want to write an equation for pressure, p, as a function of the vertical distance y.
For very small/infinitesimal intervals the theory of calculus tells us that we can write Δy and Δp and dy and dp. If we add up all the intervals over the entire height of the atmosphere we can see how the two variables depend on each other at different heights and derive the equation that will tell us how pressure depends on a specific point in the height. We add up the infinitesimal intervals by doing an integral.
dp/dy=-ρg
For large distances air is compressible and therefore density is not constant. Density can be written in terms of pressure as found in part b
dp/dy = -(Mg/RT)p→ ∫dp/p = -(Mg/RT)∫dy
ln(p1/p2) = -(Mg/RT)(y2-y1)
p2 = p1exp (-(Mg/RT)(y2-y1))
We have assumed that temperature and g are constant at all heights, not realistic. However, the answer is a good approximation compared to more accurate values and the equation demonstrates the general trend.
Use the equation you derived where you are trying to find p2 where y2 is 8848 meters, p1 is the pressure at sea level 1 atmosphere, M is 29x10^(-3)kg/mole, T is the average air temperature in 273 Kelvin, and y1 is zero.
p2 = 0.33289 atm or 253 mmHg
Learn more about atmospheric pressure from the link given below.
https://brainly.com/question/28943622
#SPJ4
Based on relative bond strengths, classify these reactions as endothermic (energy absorbed) or exothermic (energy released).AB+C --> AC+BA+ BC --> AB + CA2+C2 --> 2ACB2+C2 --> 2BCA2+B2 --> 2ABStrongest BondA-BA-AB-BC-CB-CA-CWeakest Bond
The answer is 1) Endothermic, 2) Exothermic, 3) Endothermic, 4) Endothermic, 5) Exothermic.
The stronger the bond, the more energy is required to break it, and the stronger the bond formed, the more energy is released.
AB is a strong bond and requires more energy to break it, forming a weak AC bond that releases very little energy, so the reaction is relatively endothermic since more energy is absorbed than given off. Similar logic can be applied to all 5.
Endothermic reactions consume energy in the form of heat. Endothermic reactions occur when molecules absorb energy from surroundings, causing them to break and form new bonds with other molecules.
To know more about Exothermic:
brainly.com/question/2924714
#SPJ4
Rotate the molecular structure. This can be done by clicking and dragging with your mouse, track pad, or touchscreen, depending on your device. Locate the adenine nitrogenous base and determine its location within the molecular structure. Which best describes its location? Choose one: A. not as part of a base pair; at the 3' within one polynucleotide strand B. not as part of a base pair; at the 5' end in one polynucleotide strand C. as part of a base pair; at the 3' end in one polynucleotide strand D. as part of a base pair; at the 5' end in one polynucleotide strand
C. As part of a base pair; at the 3' end in one polynucleotide strand describes its location.
Which functional group is found at the 3 ends of a polynucleotide?
The functional group that is at the end of the 3' end of the DNA is a hydroxyl group. The numbers on the carbon atoms in the pentose sugar of the nucleotides corresponding to the 3' end and the 5' end in DNA. At the 3' end, there is a hydroxyl group, made of an oxygen and hydrogen atom.
What is a nitrogenous base in DNA?
Nitrogenous base: A molecule that contains nitrogen and has the chemical properties of a base. The nitrogenous bases in DNA are adenine (A), guanine (G), thymine (T), and cytosine (C). The nitrogenous bases in RNA are the same, with one exception: adenine (A), guanine (G), uracil (U), and cytosine (C).
Why is adenine called a base?
Adenine and guanine have a fused-ring skeletal structure derived of purine, hence they are called purine bases. The purine nitrogenous bases are characterized by their single amino group (−NH 2), at the C6 carbon in adenine and C2 in guanine.
To know more about nitrogenous bases:
https://brainly.com/question/14120811
#SPJ4
For a certain ideal gas, the temperature is
increased from 200 K to 602 K allowing pres-
sure, which is initially 1 atm, to vary while
the volume and number of moles of gas are
held constant. What is the new pressure?
Answer in units of atm.
Answer:
3.01 atmospheres
Step by step explanation:
The pressure of an ideal gas is directly proportional to its temperature and directly inversely proportional to its volume. Since the volume and number of moles are held constant, the pressure will be directly proportional to the temperature.
So, using the ideal gas law, P1/T1 = P2/T2, where P1 and T1 are the initial pressure and temperature, respectively, and P2 and T2 are the new pressure and temperature, respectively.
Substituting the initial values, P1 = 1 atm and T1 = 200 K, and the new temperature T2 = 602 K, we can solve for P2:
P2 = (P1 x T2) / T1 = (1 atm x 602 K) / 200 K = 3.01 atm
Therefore, the new pressure is 3.01 atm.
Jones's test, also known as the chromic acid test, will shows the presence of? what is a positive Jones's test will appears? what is a negative Jones's test will appears?
Jones's test, also known as the chromic acid test, is used to determine the presence of aldehydes in a sample.
A positive Jones's test results in the formation of a blue or greenish-blue precipitate, indicating the presence of an aldehyde. On the other hand, a negative Jones's test results in no visible precipitation, indicating the absence of an aldehyde.
The Jones's test works by adding a small amount of chromic acid (CrO3) to a reaction mixture containing the aldehyde. If an aldehyde is present, it reacts with the chromic acid to form a complex that has a characteristic blue or greenish-blue color. This color change indicates a positive Jones's test. If no aldehyde is present, there will be no reaction and no color change, resulting in a negative Jones's test.
Jones's test is a useful tool for the identification of aldehydes in organic chemistry and is widely used in the laboratory as a qualitative test for the presence of aldehydes. However, it is important to note that the test is not quantitative and should not be used to determine the amount of aldehyde in a sample.
You can learn more about chromic acid test at
https://brainly.com/question/18521652
#SPJ4
which of the following is not a safety concern associated with the lab to determine the molar volume of a gas?
The following which is not a safety concern associated with the lab to determine the molar volume of a gas include the following below:
Keep valves closed when not in use.Do not store flammable gases near oxidizers or combustible materials.What are Flammable gases?Flammable gases are explosive when they are mixed with air or oxygen in the right proportions.
This is therefore the reason why it is best to store them in a safe environment so that a fire incident doesn't occur. The valves should also be tightly closed so nas to prevent the escape of gases intyo the atmposphere.
Read more about Flammable gases here https://brainly.com/question/15848712
#SPJ1
need help i need it quick
Answer:
A
Explanation:
I would expect a sandwich to look like A
Complete combustion of 1 mole of acetone (C3H6O) liberates 1790 kJ of energy as shown in the reaction below: C3HsO (€) + 402 (g) --> 3C02 (g) + 3H20 (€) AHSrxn = -1790 kJlmol Using the information provided (AHSrxn = -1790 kJlmol) together with the data below; Calculate the enthalpy of formation (AH?f) of acetone (C3H6O): AH?f, CO2: -393.5 kJlmol, AH?f, H2O: -285.83 kJlmol -679 kJlmol 2038 kJlmol +1019 kJlmol -248 kJlmol +1790 kJlmol
When burning one mole of acetone, 1790 kJ is released. The enthalpy of formation of acetone, C₃H₆O is equal to -247.9 kJ/mol.
The combustion reaction of a substance means the burning of a substance in the presence of oxygen to form carbon dioxide and water. For example, the combustion of carbon proceeds as follows: C + O₂ --> CO₂. We have the molar enthalpy of combustion of acetone,
C₃H₆O(l) + 4O₂(g)→ 3CO₂(g) + 3H₂O(l)
Where, ∆H꜀= −1790 kJ. We need to calculate the enthalpy of formation of acetone. Now, the standard enthalpy of formation, *ΔHf(O₂)= 0 kJ/mol, *ΔHf(CO₂)
=−393.4 kJ/mol, *ΔHf(H₂O)= -285.8 kJ/mol. We determine the enthalpy of formation of acetone as follows:
∆H꜀ = 3×ΔHf (CO₂) + 3×ΔHf (H₂O) – 1× ∆Hf(C₃H₆O) – 4× ΔHf (O₂)
=> −1790 kJ = 3 mol × −393.4 kJ/mol + 3 mol × -285.8 kJ/mol - 1 mol × ∆Hf(C₃H₆O) - 4 mol × 0
=> −1790 kJ = - 1180.5 kJ - 857.4 kJ - ∆Hf(C₃H₆O)
=> 1 mol×∆Hf(C₃H₆O)= -1180.5 kJ - 857.4 kJ + 1790 kJ
=> ∆Hf(C₃H₆O) = - 247.9 kJ/mol
Therefore, the required enthalpy value for acetone is -247.9 kJ/mol.
To learn more about enthalpy of formation, refer:
https://brainly.com/question/17508960
#SPJ4
An aqueous solution at 25°C has a H3O+ concentration of ×8.810−12M . Calculate the OH− concentration. Be sure your answer has the correct number of significant digits.
The OH⁻ concentration will be 10^2.9031
The amount of hydrogen ions present in a solution or substance is first and foremost indicated by the pH scale, which measures acidity or alkalinity.
The concentration of hydrogen ions, or H₃O⁺, is what is referred to as the pH, which is defined as the negative base 10 logarithm of the activity of hydrogen ions:
pH= - log [H⁺]= - log [H₃O⁺]
An aqueous solution at 25°C has a H₃O⁺ concentration of 8.8 x 10⁻¹²M
pH= - log [H⁺]= - log [H₃O⁺]
pH= - log [8.8 x 10⁻¹²M]
pH = 11.0969
The following relationship can be established between pH and pOH:
pOH + pH= 14
pOH = 14- pH
pOH = 14- 11.0969
pOH = 2.9031
pOH = - log [OH]
2.9031 = - log [OH]
[OH] = 10^2.9031
Learn more about pH and pOH:
brainly.com/question/16032912
#SPJ4
How many grams of KCL are needed to prepare 200.0mL of 0.900% (m/v) KCL solution?
Answer:
To prepare 200.0 mL of 0.900% (m/v) KCl solution, 91.4 grams of KCl are required. [1] This can be calculated by first converting the molarity to moles, then using the atomic mass of KCl to convert the number of moles to grams. For example, 2.45 moles of KCl is required to make 0.5 L of 2.45 M solution. [2] This calculation can also be applied to other salts, such as CuSO4.6H2O, to find the required mass to make a given 0.300 M solution. [3]
Explanation:
In order to prepare a 200.0 mL solution of 0.900% (m/v) KCL, you will need 1.8 grams of KCL.
Explanation:To resolve the question of 'How many grams of KCL are needed to prepare 200.0mL of 0.900% (m/v) KCL solution?', first we need to understand that the %(m/v) here means grams of solute per 100 mL of solution. Hence, for a 0.900% (m/v) KCL solution, there would be 0.900 grams of KCL per 100 mL of solution.
For preparing 200.0mL (which is double of 100mL), simply double the amount of KCL needed. So, 0.900 grams x 2 = 1.8 grams.
So, you therefore need 1.8 grams of KCL to prepare 200.0mL of 0.900% (m/v) KCL solution.
Learn more about Solution Preparation here:
https://brainly.com/question/32551796
#SPJ2
Part 1: Read the following information on elements, compounds and mixtures. Fill in the blanks where necessary Elements: A pure substance containing only one kind of • An element is always uniform all the way through (homogeneous). An element be separated into simpler materials (except during nuclear reactions). • Over 100 existing elements are listed and classified on the Compounds: A pure substance containing two or more kinds of The atoms are __combined in some way. Often times (but not always) they come together to form groups of atoms called molecules • A compound is always homogeneous (uniform). Compounds _ be separated by physical means. Separating a compound requires a chemical reaction The properties of a compound are usually different than the properties of the elements it contains. Mixtures: • Two or more NOT chemically combined. • No reaction between substances. • Mixtures can be uniform (called ) and are known as solutions. • Mixtures can also be non-uniform (called • Mixtures can be separated into their components by chemical or physical means. • The properties of a mixture are similar to the properties of its components. Part 2: Classify each of the following as elements (E), compounds (C) or Mixtures (M). Write the letter X if it is none of these. Diamond (C) Sugar (C.H.O.) Milk Air Sulfuric Acid (H:50.) Gasoline Krypton (K) Bismuth (B1) Uranium (U) Water (H20) Alcohol (CH,OH) Pail of Garbage Ammonia (NH3)_ Salt (NaCl) Energy Wood Bronze Dry Ice (CO) _Baking Soda (NaHCO)_Titanium (T1) Iron (Fe) Electricity Popcorn A dog Gold (Au) Pizza Concrete Ink CHEM 1101 AY 2019-2020 SEM 2
A pure substance containing two or more kinds of the atoms are elements combined in some way. Compounds can be separated by physical means.
A physical approach cannot separate the components of a substance. Chemical or electrochemical methods must be used to separate the elements from compounds because they are chemically bonded together.
A compound is anything created when two or more separate chemical elements are mixed together in a specific proportion. Chemical connections that are challenging to break are created when the elements interact with one another. These bonds develop as a result of atoms sharing or trading electrons.
A mixture is a substance composed of two or more unrelated chemical components. A mixture is a physical combination of two or more distinct substances that can take the form of solutions, suspensions, or colloids.
To know about compounds
https://brainly.com/question/14658388
#SPJ4
Choose the words that correctly complete the paragraph. Susan ran the 400-m sprint at the track meet, and her final time was 65 s. She reported that her velocity in the race was 6.15 m/s. Susan’s statement was an inaccurate report of velocity because she mentioned only Choose... . She did not include Choose... , which is also a part of velocity.
Susan ran the 400-m sprint at the track meet, and her final time was 65 s. She reported that her velocity in the race was 6.15 m/s. Susan’s statement was an inaccurate because she mentioned only speed.
What is velocity?Velocity is a vector measure of an object's rate of motion and direction of motion. As a result, in order to calculate velocity using this definition, we must be familiar with both magnitude and direction.
For example, if an item travels west with 5 meters a second (m/s), its velocity to the west will be 5 m/s. The most frequent and simplest approach to determine velocity is using the formula shown below. Susan’s statement was inaccurate because she mentioned only speed.
Therefore, susan’s statement was inaccurate because she mentioned only speed.
To learn more about velocity, here:
https://brainly.com/question/80295
#SPJ1
is the chemical energy of a unit of graphite is lower than the chemical energy of a unit of diamond.
Yes, the chemical energy of a unit of graphite is lower than the chemical energy of a unit of diamond.
This is because the arrangement of carbon atoms in diamond has a higher cohesive energy per unit volume than that of graphite, making it more energetically stable. Diamonds also have stronger carbon-carbon bonds than graphite, which further contributes to their higher energy.
Graphite is composed of layers of carbon atoms arranged in a hexagonal lattice, while diamond is composed of carbon atoms arranged in a tetrahedral lattice structure. The arrangement of atoms in diamond increases the strength of the carbon-carbon bonds, resulting in a higher cohesive energy per unit volume than graphite.
Learn more about chemical energy:
https://brainly.com/question/28324294
#SPJ4
Which of the following locations is the most likely source of young sand with little quartz, that is dark in color, and that does not bubble when acid is added to it? (a) Great Salt Lake in Utah (b) a North American beach with pounding waves (c) a volcanic island (d) a beach near a coral reef
The location that is the most likely source of young sand with little quartz, that is dark in color, and that does not bubble when acid is added to it is a volcanic island (C)
The presence of either black basalt or green olivine gives volcanic sand its characteristically dark appearance. Volcanic sand is relatively young and, with the exception of obsidian particles, contains very little or any quartz at all. The majority of volcanic oceanic sands can be found on volcanic islands. Sand grains are created when dissolved mineral matter, primarily calcium carbonate, undergoes the process of precipitation in water, this results in the formation of precipitate sand.
To learn more about the volcanic sand, click here:
https://brainly.com/question/1156480
#SPJ4
what is the awnser to this
Answer: 2/3
Explanation:
Given the information below, determine the crystal structure. Consider only FCC and BCC structures as possibilities.Lattice parameter a = 0.4997 nmPowder x-ray: λ = 0.1542 nm2θ (°) Constructive Interference 31.0, 36.0, 51.8, 61.6, 64.8
The crystal structure of the material is FCC.
The powder x-ray diffraction pattern and the lattice parameter are used to determine the crystal structure of a material.
The presence of constructive interference at 2θ values of 31.0°, 36.0°, 51.8°, 61.6°, and 64.8° suggests that the material has a face-centered cubic (FCC) crystal structure. This is because the FCC crystal structure is characterized by diffraction peaks at 2θ values of roughly 43.5°, 46.6°, 48.3°, 50.0°, and 51.7°.
In an FCC crystal structure, the lattice points are located at the center of the faces of the unit cell. The lattice parameter "a" represents the length of one side of the unit cell.
On the other hand, a body-centered cubic (BCC) crystal structure is characterized by diffraction peaks at 2θ values of roughly 48.7°, 51.4°, and 53.1°.
Given the lattice parameter and the powder x-ray diffraction pattern, it can be concluded that the crystal structure of the material is FCC.
To know more about face-centered cubic here
https://brainly.com/question/14789204
#SPJ4
how many grams are in 1.53 moles of Li2Co3
To find the number of grams in 1.53 moles of Li2Co3, we need to multiply the moles by the molar mass of Li2Co3. The molar mass of Li2Co3 is calculated as follows:
Li2Co3:
Li = 2 × 6.939 g/mol = 13.878 g/mol
Co = 3 × 58.933 g/mol = 176.799 g/mol
Total: 13.878 g/mol + 176.799 g/mol = 190.677 g/mol
So, 1.53 moles × 190.677 g/mol = 294.455 g of Li2Co3.
What is molar mass?The term "molar mass" describes the weight in atomic mass units of one mole of a substance (AMU). It is a way to quantify how much of a substance has exactly as many atoms, molecules, or ions as there are in 12 grams of pure carbon-12. The atomic masses of all the atoms in a substance's molecular formula are added up to determine its molar mass. Conversions between mass, moles, and concentration are possible. For many chemical calculations, such as calculating reaction yields or figuring out the concentration of a solution, the ability to convert a mass to moles and vice versa depends on knowing a substance's molar mass.
To know more about molar mass, check out:
https://brainly.com/question/29515192
#SPJ1
Mathematical Representations Quick Check
How does the formation of water from hydrogen and oxygen demonstrate the conservation of mass? (1 point)
Storm
The atomic number of the reactants equals the atomic number of the product, and the product has the same
number of molecules as the reactants.
The atomic mass of the reactants equals the atomic mass of the product, and the product has the same
number of atoms as the reactants.
The atomic number of the reactants equals the atomic number of the product, and the product has the same
number of atoms as the reactants
The atomic mass of the reactants equals the atomic mass of the product, and the product has the same.
number of molecules as the reactants.
The atomic mass of the reactants equals the atomic mass of the product, and the product has the same.
What is the conservation of mass?The conservation of mass is a fundamental principle in physics and chemistry that states that the total mass of a system remains constant, regardless of any changes that take place within the system. In other words, mass cannot be created or destroyed, only transformed from one form to another.
This law applies to both physical and chemical processes, and is a key concept in fields such as thermodynamics, mechanics, and material science. It forms the basis for our understanding of the behavior of matter and energy in the universe, and is widely used in scientific and engineering calculations and experiments.
Learn more about conservation of mass:https://brainly.com/question/15370092
#SPJ1
Answer:
1. the reactants and the products have the same number of atoms of the same elements
2. the mass of one titanium atom is equal to the mass of four carbon atom
3. The atomic mass of the reactants equals the atomic mass of the product, and the product has the same number of atoms as the reactants.
4. 80amu
5. A molecule with two atoms combined with a molecule with three atoms to produce a molecule with a mass of 84 u.
Explanation: got 100% hope you get the same!
For the following reaction, 8.10 grams of silicon tetrafluoride are allowed to react with 5.90 grams of water.
Silicon tetrafluoride(s) + water(l) → hydrofluoric acid(aq) + silicon dioxide(s)
What is the maximum amount of hydrofluoric acid that can be formed?
What is the FORMULA for the limiting reagent?
What amount of the excess reagent remains after the reaction is complete?
The maximum amount of HF that can be formed is 0.312 mol. The formula for the limiting reagent is SiF4. The amount of excess H2O that was consumed is: n(H2O excess consumed) = 0.
What is limiting reagent?Limiting reagent is the reactant that is completely used up in reaction and hence determines when the reaction stops.
SiF4(s) + 2 H2O(l) → 4 HF(aq) + SiO2(s)
Molar masses of SiF4 and H2O are:
SiF4: 28.09 + 4 x 19.00 = 104.09 g/mol
H2O: 2 x 1.01 + 16.00 = 18.02 g/mol
Number of moles of each reactant is:
n(SiF4) = 8.10 g / 104.09 g/mol = 0.0779 mol
n(H2O) = 5.90 g / 18.02 g/mol = 0.327 mol
For SiF4: n(HF) = 0.0779 mol SiF4 × (4 mol HF / 1 mol SiF4) = 0.312 mol HF
For H2O: n(HF) = 0.327 mol H2O × (4 mol HF / 2 mol H2O) = 0.654 mol HF
We see that H2O produces a larger amount of HF than SiF4, indicating that SiF4 is limiting reagent. Therefore, the maximum amount of HF that can be formed is 0.312 mol.
The formula for the limiting reagent is SiF4.
From the balanced equation, we see that 1 mol of SiF4 reacts with 2 mol of H2O to produce 4 mol of HF. Therefore, the amount of H2O required to react with 0.0779 mol of SiF4 is:
n(H2O) = 0.0779 mol SiF4 × (2 mol H2O / 1 mol SiF4) = 0.1558 mol H2O
The amount of excess H2O that was consumed is: n(H2O excess consumed) = 0.
To know more about limiting reagent, refer
https://brainly.com/question/26905271
#SPJ1
When a light bulb is rated at 60 W, it means that
A.each second, the bulb converts 60 J of electrical energy to heat and light.
B.the bulb loses 60 W of potential energy each second.
C.current is traveling at 60 m/s through the filament.
D.the bulb uses 60 J of power when it is lit.
The molecules of a gas are much farther apart than molecules in a solid or liquid.
True
False
The first question has an answer of A: the bulb turns 60 J of electrical energy into heat and light every second. It is True that a gas's molecules are significantly more spaced away from one another than those of a solid or liquid.
A heated filament or a gas discharge generate light in a light bulb, an electric device. The light of the bulb is produced by a wire filament that is heated by an electric current. Thomas Edison created the first incandescent light bulb that was commercially viable in 1879, and by creating a useful source of artificial light, it completely changed the way we live today. With the introduction of compact fluorescent bulbs, LED lights, and other technologies, light bulbs have developed over time to become more energy-efficient. Light bulbs today are a necessary part of contemporary life, providing illumination for private residences, commercial buildings, and public areas.
Learn more about light bulb here:
https://brainly.com/question/1717583
#SPJ4
Which of the following reactions
is BALANCED and shows
COMPLETE combustion?
A. 2C,H, +70,- 4CO₂ + 6H₂O
B. 2C,H, +40,5CO + 6H₂O
C. 2C,H, +40, 7CO₂ + 6H₂O
D. 2C,H, +50,- 4CO + 6H₂O
1
The balance of the reaction equation occurs when the number of atoms of each element is the same on both sides of the equation.
How do you know a balanced combustion equation of hydrocarbons?The question is incomplete but the reaction equation of the hydrocarbons for a combustion reaction can be known to be balanced in the following ways;
To write a balanced combustion equation of hydrocarbons, you need to follow these steps:
Write the chemical formula for the hydrocarbon, which has the general form CxHy.
Write the balanced chemical equation for the combustion of the hydrocarbon, which is typically written as:
CxHy + (x + y/4) O2 → x CO2 + (y/2) H2O
where O2 is the oxygen required for complete combustion, CO2 is carbon dioxide, and H2O is water. The factor of (x + y/4) in front of the O2 represents the stoichiometric coefficient required to balance the equation.
Balance the equation by adjusting the stoichiometric coefficients of the reactants and products so that the number of atoms of each element is the same on both sides of the equation.
Check that the equation is balanced by counting the number of atoms of each element on both sides of the equation.
Learn more about balanced reaction:https://brainly.com/question/14280002
#SPJ1
Assume that 8.5 L of iodine gas (I2) are produced at STP according to the following balanced equation:
2KI (aq) + Cl2 (g) --> 2KCl (aq) + I2 (g)
a. How many moles of I2 are produced? ________ moles I2 (3 sig figs)
b. How many moles of KI were used? _________ moles KI (3 sig figs)
c. How many grams of KI were used? _________ grams KI (3 sig figs)
20 points
As per the balanced reaction two mole of KI gives one mole of I2. 8.5 L at STP equal to 0.37 moles. 0.74 moles of KI or 122.8 grams are required to produce 0.37 moles of I₂.
What is STP condition ?The standard condition of temperature (298 K ) and pressure (1 atm) is called STP. At STP, one mole of every substance contains 22.4 L volume.
Hence, number of moles of 8.5 L of iodine gas at STP is = 8.5 L/22.4 L/mol = 0.37 moles.
As per the balanced reaction, 2 moles of KI is used to produce one mole of I2. Then, number of moles of KI used to give 0.37 moles of iodine is:
0.37 × 2 = 0.74 moles of KI.
Molar mass of KI = 166 g/mol
mass of 0.74 moles = 166 × 0.74 = 122.8 g.
Therefore, 122.8 grams of KI were used for 8.5 L of iodine gas.
Find more on STP condition :
https://brainly.com/question/14487178
#SPJ1
For the compounds H2Te, H2Se, H2S, H2O the general trend is that boiling point increases as the _______ increases. This trend is observed because electrons are held more _____ in H2Te when compared to the other molecules resulting in a stronger induced ________.
For the compounds H2Te, H2Se, H2S, H2O the general trend is that boiling point increases as the molecular weight increases. This trend is observed because electrons are held more tightly in H2Te when compared to the other molecules resulting in a stronger induced dipole interaction.
The boiling point of a substance is related to its molecular weight, as well as its molecular structure. In the case of H2Te, H2Se, H2S, and H2O, the boiling point increases as the molecular weight increases.
This trend is because the electrons in H2Te are held more tightly compared to the other molecules, leading to a stronger induced dipole-dipole interaction between the molecules. This stronger interaction requires more energy to overcome, resulting in a higher boiling point.
Learn more about boiling point:
https://brainly.com/question/28203474
#SPJ4
use the data to determine the heat of vaporization of hexane. Express your answer to three significant figures in kilojoules per mole.
Heat of vaporization of hexane is 32.3 KJ/mol.
Clausius-Clapeyron equation allows us to estimate the vapor pressure of A substance at any temperature It also provides an easy way to estimate The heat of phase transition from the vapor pressures measured at two Temperatures.
lnP2/P1=ΔHvapR(1/T1−1/T2)
Where,
P1 = vapor pressures at temperature T1
P2 = vapor pressures at temperature T2
ΔHvap = Heat of Vaporization
R = Gas constant (8.3145 J mol-1 K-1)
Using T1 =293 k and T2=303k
In(120/186) = ΔHvap/8.31 (1/303-1/293)
ΔHvap= In(120/186) x 8.31 x 303x293/(293-303)
(-0.438) x (8.31) x (303x293)/-10
32313.6 J/mol
32.3 KJ/mol
To learn more about Heat of vaporization
https://brainly.com/question/13372553
#SPJ4
the energy lost when of water cools from 86.4 ∘C to 4.8 ∘C
The amount of energy needed to raise a material's heat content by precisely 1 degree per gram is known as specific heat. If we assume the mass of water 1gm the energy lost is -341.088.
What is specific heat capacity?
Heat always transfers from the warmer to the cooler material until both materials reach the same temperature when two materials, each at an initial different temperature, are placed in contact with one another.
Q = mC(T(final) - T(initial)
Q = 1 X 4.8 (4.8 - 86.4) = -341.088
The heat obtained by the initially colder substance must equal the heat lost by the initially warmer material, according to the law of conservation of energy.
To learn more about heat, here
https://brainly.com/question/934320
#SPJ1