Assume the edge length of the unit cell for tantalum is 331 pm. Calculate the volume of this unit cell in cm³. Remember, there are 1. 00x10¹⁰ pm per 1. 00 cm

The captain when Dr. Livesey stands up to him in Chapters 1-3 of Treasure Island, He pulls out a knife, but decides to put it away and does nothing. The correct answer C.

In chapters 1-3 of Treasure Island, when Dr. Livesey stands up to the captain, the captain initially reacts aggressively by taking out a knife. However, he ultimately decides to put it away and does nothing.

This shows that the captain is a volatile and unpredictable character, but also that he is capable of exercising restraint when necessary..

Learn more about Treasure Island:

https://brainly.com/question/265415

#SPJ11

CH3OH has two lone pairs, both of which are on the oxygen atom.

The core atom in CH3OH (methanol) is carbon (C), which possesses four valence electrons. Methanol is made up of three hydrogen atoms, one carbon atom, and one oxygen atom. Since oxygen has six valence electrons and likes to create two covalent bonds with other atoms, oxygen forms two single bonds with the carbon atom in methanol.

Each of methanol's three hydrogen atoms creates a single connection with the carbon atom. This leaves the oxygen atom with two pairs of unshared electrons, or lone pairs, one on each side. These two lone pairs on the oxygen atom form no chemical connections with the other atoms in the molecule.

For more such questions on lone pairs, click on:

https://brainly.com/question/3915115

#SPJ4

The oxidation-reduction and ion-exchange processes involved in the diagram are as follows:

Oxidation-reduction or Redox reactions involve a shift in the oxidation state of the substrate. When electrons are lost or the oxidation state increases, it is called oxidation; when they are gained or the oxidation state decreases, it is called reduction.

Ion exchange is a chemical reaction in which different ions with similar charges in solution are swapped for free mobile ions of a solid, the ion exchanger.

Learn more about oxidation-reduction reactions at: https://brainly.com/question/21851295

#SPJ1

To find functional groups in an IR spectrum, you need to identify characteristic absorption peaks associated with specific functional groups.

This can be done by comparing the observed spectrum to reference spectra or by using IR spectroscopy databases. Common functional groups and their associated absorption peaks include: carbonyl groups (1700-1750 cm^-1), hydroxyl groups (3200-3600 cm^-1), and amine groups (3200-3500 cm^-1).

Additionally, the presence or absence of certain peaks can indicate the presence or absence of specific functional groups. Overall, identifying functional groups in an IR spectrum requires knowledge of the characteristic absorption peaks associated with those groups and the ability to interpret the observed peaks in the context of the molecule being studied.

To know more about the IR spectrum, here

brainly.com/question/29753167

#SPJ4

Steps which are involved in formation of a solution as endothermic are separation of solute molecules ,separation of solvent molecules and exothermic is formation of solute-solvent interactions.

In thermochemistry, an exothermic response is a "reaction for which the general standard enthalpy change ΔH° is negative." Exothermic responses normally discharge heat. The term is frequently mistaken for exergonic response, which IUPAC characterizes as "... a response for which the general standard Gibbs energy change ΔG° is negative."

A firmly exothermic reaction will as a rule likewise be exothermic on the grounds that ΔH° makes a significant commitment to ΔG°. The greater part of the fantastic substance responses that are exhibited in study halls are exothermic and endothermic. The inverse is an endothermic reaction, which ordinarily takes up heat and is driven by an entropy expansion in the framework.

To know more about exothermic reaction ,visit here:

https://brainly.com/question/10373907

#SPJ4

Magnesium chloride crystals can be formed by reacting an insoluble base with an acid. The reaction can be represented by the following equation:

In this reaction, magnesium hydroxide (Mg(OH)₂) is the insoluble base and hydrochloric acid (HCl) is the acid. When these two substances react, they produce magnesium chloride (MgCl₂) and water (H₂O).

The magnesium chloride formed in this reaction is in the form of crystals. The crystals form because the reaction produces an excess of ions, which then attract to each other and form a lattice-like structure. This is known as crystallization. The magnesium chloride crystals are colorless and have a salty taste.

Learn more about Magnesium chloride at: https://brainly.com/question/28193925

#SPJ11

The re are following 12 types of chemical reactions are:

1. Thermal Decomposition Reaction - A → B + C

2. Decomposition Reaction - AB → A + B

3. Single Displacement or Substitution Reaction - A + BC → B + AC

4. Double Displacement or Metathesis Reaction - AB + CD → AD + CB

5.  Redox Reaction or Oxidation-Reduction Reaction - A + B → AB or A + B → A + B

6. Acid-Base Neutralization Reaction - HX + MOH → MX + H2O

7. Precipitation Reaction - AB + CD → AD + CB (formation of a solid)

8. Neutralization Reaction - Acid + Base → Salt + Water

9. Photochemical Reaction - A + hν → B + C

10. Combination or Synthesis Reaction - A + B → AB

11. Electrolysis Reaction - AB → A + B

12. Biological Reactions - Photosynthesis, Respiration, Digestion, etc.

It is important to say that some of these reactions may overlap or happens simultaneously.

To know more about Chemical reactions:

https://brainly.com/question/29762834

#SPJ4

Cells use lipids, such as fatty acids and triglycerides, for long-term energy storage. The correct answer A.

These molecules are broken down in the cells to release energy when needed. Additionally, cells can also store energy in the form of polysaccharides such as glycogen, which can be broken down and used for energy when required.

Lipids are molecules that contain hydrocarbons and are the building blocks of fats, which are the primary form of energy storage in cells. Fatty acids are stored as triglycerides, which are composed of three fatty acid molecules and one glycerol molecule. When these molecules are broken down, the energy stored in them is released and can be used to fuel cell processes.

Complete questions:

What types of molecules do cells use for long-term energy storage? Select all that apply.

A)lipids

B)proteins

C)amino acids

Learn more about molecules :

https://brainly.com/question/475709

#SPJ4

No, the atomic mass of copper is not 64. The atomic mass of copper is approximately 63.546 atomic mass units (amu).

Copper has an atomic mass of around 63.546 atomic mass units (amu). The mass of all naturally occurring copper isotopes, weighted to account for their respective abundances, is represented by this value.

Copper-63, which accounts for around 69% of naturally occurring copper, is the most prevalent isotope of the metal. Copper-65 makes up the remaining 31%. Copper-63 has an atomic mass of around 62.93 amu, while copper-65 has an atomic mass of roughly 64.93 amu. The resultant atomic mass is roughly 63.546 amu when these two isotopes are averaged together, taking into consideration their relative abundances. Chemically speaking, copper is an element with the symbol Cu and the atomic number 29. It has a very high thermal conductivity and electrical conductivity and is a soft, malleable, and ductile metal.

For such more questions on copper :

brainly.com/question/2289251

#SPJ4

It is important to use the correct amount of solvent for recrystallization to achieve a good yield and a high level of purity of the final product. The correct amount of solvent depends on the solubility of the compound, which can be determined through prior testing and experimentation.

What is Recrystallization?

Recrystallization is a common laboratory technique used to purify solid compounds. The process involves dissolving a solid compound in a solvent, and then allowing the compound to crystallize as the solution cools, thereby separating it from impurities that may be present.

If too much solvent is used for a recrystallization, it can lead to several negative outcomes:

Poor Yield: A very common issue associated with using too much solvent for recrystallization is that it can lead to a low yield. If the amount of solvent is much more than what is needed, the solubility of the compound may increase, and some of the material will remain in the solution rather than crystallizing out. This results in a lower yield of purified crystals.

Low Purity: If too much solvent is used, it can result in the formation of smaller or less pure crystals, as the solubility of impurities may also increase. When the solvent cools and the crystals form, the impurities can become trapped within the crystal structure or coat the surface of the crystals, reducing their purity.

Increased Time and Effort: Using too much solvent can also increase the time and effort required for recrystallization. Since more solvent is needed to dissolve the compound, it takes more time to heat and dissolve the compound. Additionally, more solvent also means longer filtration and drying times, which can prolong the purification process.

Increased Costs: Using too much solvent can increase the cost of the process as it requires more solvent and more energy to heat and evaporate the solvent.

Learn more about Recrystallization from given link

https://brainly.com/question/10194206

#SPJ4

A pipet is used to measure out 10 mL of water. If the mass of this volume of water is 9.990 g and the density of water is given as 0.9978 g/mL, then the actual volume of water measured is 10.012 mL. The correct answer is D.

The question gives us the mass and density of the water, and asks us to find the actual volume of water measured using a pipet. To do this, we can use the formula for density, which relates the mass and volume of a substance, and is given by the following formula:

density = mass/volume

Rearranging this formula, we get:

volume = mass/density

volume = 9.990 g / 0.9978 g/mL

volume = 10.012 mL

So the actual volume of water measured out is 10.012 mL.

To learn more about density visit: https://brainly.com/question/952755

#SPJ4

The depiction of valence electrons around the symbol of an element as dots is called an "Electron Dot Structure". Option B is the correct answer.

The Electron Dot Structure, also known as Lewis dot diagram, is a shorthand notation that represents the valence electrons of an atom as dots surrounding the atomic symbol.

The number of valence electrons is determined by the group number of the element in the periodic table. The Electron Dot Structure is used to predict the chemical bonding behavior of an element and to understand the basic properties of compounds formed from those elements.

To know more about the Electron Dot Structure, here

brainly.com/question/9840379

#SPJ4

An ICE (Initial, Change, Equilibrium) table is simple matrix formalism that used to simplify the calculations in reversible equilibrium reactions (e.g., weak acids and weak bases or complex ion formation).

In most cases, ICE tables are used to calculate the K, or equilibrium constant expression, of a reaction (in some cases, K may be given, and one or more of the concentrations in the table will be the unknown to be solved for). ICE tables are made up of the concentrations of molecules in solution at various stages of a reaction. The variables and constants required to calculate the unknown are automatically set up and organized in ICE tables.

The first column of the table's titles are abbreviated as ICE.

Initial focus is denoted by the letter I. The initial product and reactant concentrations are listed in this row.

know more about ICE table click here;

https://brainly.com/question/30395953?referrer=searchResults

#SPJ4

12- Crown- 4,  else called lithium ionophore V and- tetraoxacyclododecane, is a crown ether with the chemical formula C8H16O4.  

It's a lithium cation-specific cyclic tetramer of the chemical  emulsion ethylene oxide. The notable opiate ether,  else called diethyl ether, is a natural chemical that's an individual from the wide group of substances known as ether. Itssub-atomic design comprises of two ethyl bunches joined by an oxygen iota, as in C2H5OC2H5. The chemical  emulsion- trichloroethanol has the formula Cl 3CCH 2OH. Its  flyspeck can measure up to that of ethanol with three chlorine iotas at position 2  rather of the methyl bunch. Dimedone(,5- dimethyl) just responds with sulfenic  sharp and does not respond with  dropped thiol. A flexible delegate used in the development of  colorful chemical  particulars, including  medicines, cyclohexenone is a natural  flyspeck.

to know more about Diethyl ether click here:

brainly.com/question/17650569

#SPJ4

The pressure that can be measured at a particular height and is considered to be a location's actual barometric pressure is called station pressure.

Aircraft performance and flight levels are both based on pressure altitude, which is crucial for aircraft operating at or above 18,000 feet. Pressure altitude is adjusted for non-standard temperature to produce density altitude.

The pressure that can be measured at a particular height and is considered to be a location's actual barometric pressure is called station pressure. In radio and television broadcasts, the pressure reading that is most frequently heard is the altimeter setting. The barometric pressure at a station is not accurate.

Even when there is no discernible change in elevation, station pressures quickly shift across short horizontal distances.

The station pressure, which is the actual barometric pressure of a location, is the pressure that is measured at a particular elevation. The pressure indication that is most frequently heard in radio and television broadcasts is the altimeter setting. It is not the station's actual barometric pressure.

Therefore, the correct answer is option 4. All of the above.

To learn more about pressures refer to:-

brainly.com/question/30482677

#SPJ4

The radioactive carbon isotope carbon-14 has a nucleus that contains six protons and eight neutrons.

A chemical element that releases radiation when it decomposes and becomes more stable. Radioisotopes can exist naturally or can be created in a lab. They are utilised in medical procedures such as imaging testing and treatment. also known as a radionuclide.

A radioactive isotope is any of numerous distinct forms of the same chemical element with various weights and unstable nuclei. These isotopes spontaneously generate radiation in the form of alpha, beta, and gamma rays as a result of their instability, which demonstrates a significant amount of energy.

Isotopes are atoms of the same element with differing quantities of neutrons. There are radioactive isotopes of several different elements. Since their nuclei are unstable, they decay and release radiation.

Therefore, the correct answer is option a) 8.

The complete question is:

The widely-used radio active isotope of carbon 14C has an atomic number of 6, and a mass number of 14. How many neutrons does carbon have?

a) 8

b) 28

c) 20

d) 12

e) 6

To learn more about radio active isotope refer to:

https://brainly.com/question/18640165

#SPJ4

The molar mass of K₂SO₄, also known as potassium sulfate, is 174.259 g/mol.

This is calculated by adding the atomic masses of each element in the compound, which are 2 potassium (K) atoms with a combined mass of 78.196 g/mol, 1 sulfur (S) atom with a mass of 32.066 g/mol, and 4 oxygen (O) atoms with a combined mass of 64.997 g/mol.

The resulting sum is 175.259 g/mol, but since the compound has a formula unit of K₂SO₄, we divide by 2 to obtain the molar mass of one unit, which is 174.259 g/mol. The molar mass is an important quantity in chemistry as it allows for conversion between mass and moles of a substance, which is crucial for chemical reactions and stoichiometry.

To know more about the molar mass, here

brainly.com/question/22997914

#SPJ4

For a 5 mm NMR tube, the solvent should be about 4 cm deep. So, correct option is A.

A well prepared  NMR tube solution is significant for obtaining quality spectra.

Decision of Dissolvable:

NMR tests are customarily finished in deuterated solvents, yet you can gather usable spectra in non-deuterated solvents (no-D NMR) also. While choosing a NMR dissolvable, consider:

Dissolvability

The dissolvable's compound shift. Will the leftover dissolvable sign disrupt test resonances. Substance shifts are dissolvable ward, so if you need to contrast your outcomes and a distributed range, ensure you utilize a similar dissolvable.

Dissolvable Virtue:

Numerous deuterated solvents are accessible to buy in the Science stockroom. The "%" esteem on a NMR dissolvable jug alludes to the degree of deuteration, not virtue. On the off chance that you have an especially requesting application you might need to purge the dissolvable. In the event that you have a water-delicate analyte you should dry the dissolvable preceding use. We suggest 3 Å, Linde-type, tube shaped sub-atomic strainers.

The standard round sifters will generally deliver dust, which can prompt shimming issues. Enact the strainers in a drying stove and cool inside a desiccator prior to adding them to your dissolvable. Wrap parafilm around the covers of dissolvable containers to prevent dampness from getting in. Note: Parafilm is great for keeping water out however it won't keep apolar solvents in your cylinder.

Hence,correct option is A.

To know more about NMR ,visit here:

https://brainly.com/question/29584696

#SPJ4

The given statement is  "The two atoms in a water molecule are arranged asymmetrically" is true as the two hydrogen atoms are arranged asymmetrically. The correct option is a.

In the water molecule, the oxygen atom (O) and the two hydrogen atoms (H) are arranged as the asymmetrically. This will produces the dipole, the molecule with the one negatively and the one positively charged end. It will depending on the temperature, the dipoles align themselves in to the aggregates according to the charge, such as, in the formation of the ice crystal.

Water is the polar molecule, this is due to the O-H bond of the water, Oxygen is the more electronegative due to which the partial positive charge and the partial negative charge will created on the hydrogen and the oxygen, this resulting in the dipole moment. Therefore, the correct option is a.

To learn more about water here

https://brainly.com/question/29987675

#SPJ4

Answer:

B

Explanation:

becauuse a decrease in molecular action decrease energy energy leading to increase in temperature temperature

It's important to utilise immersion oil that is properly matched when employing oil aims. Use only oil that is advised by the unbiased manufacturer.

In the absence of oil, light waves bounce off the slide specimen and travel through the glass cover slip, across the atmosphere, and into the microscope lens . When a wave encounters a new substance, unless it exits at a 90-degree angle, it bends, with the amount of bend depending on the angle. The result warps the image. Oil has a more glass-like index of refraction than does air, which results in a smaller bend. Air has a considerably different index of refraction from glass. An oil-immersed lens can be almost as effective as one made completely of glass because specially prepared oil can have a refractive index that is nearly identical to that of glass (which would be impractical).

Transparent oils with particular optical properties called immersion oils.

Learn more about oil immersion here: https://brainly.com/question/8291439

#SPJ4

In the DNA ,the nitrogen bases are held together in the center of the molecule by the hydrogen bond.

The nitrogen bases are held together in the center of the DNA molecule by the hydrogen bond. The hydrogen bond that is the H - bond binds the nitrogen bases in between the two strands of the DNA. There are the two hydrogen bonds that is present in between the A and the T and the three hydrogen bond in between the G and the C.

The hydrogen bond in the DNA held together the nitrogen bases in the center of the molecule.

This question is incomplete, the complete question is :

In the DNA ,the nitrogen bases are held together in the center of the molecule by ?

To learn more about DNA here

https://brainly.com/question/11871151

#SPJ4

Given that he traveled at an average speed of 45mph to his mom's house, Mark did not make it to dinner on time because he arrived at 6:40 pm.

To find out how long it took Mark to travel 300 miles at an average speed of 45mph, we can use the formula:

Distance = Average speed × Time

Rearranging the formula to solve for time, we get:

Time = Distance / Average speed

Plugging in the given values:

Time = 300 miles / 45mph

Time = 20/3 hours = 6 hrs and 40 mins

Since Mark left his house at 12:00, he would arrive at his mom's house at 6:40 (12:00 + 6.67 hours), which is 40 minutes after dinner was supposed to be ready at 6:00. Therefore, Mark did not make it to dinner on time.

Learn more about Average speed here: https://brainly.com/question/6504879.

#SPJ11

The molar mass of a molecule say oxalic acid, C₂H₂O₄ is equals to the ninety grams per mole, i.e., 90 g/mol.

Molar mass of any molecule is the addition of the masses of the individual atoms present in that molecule within the quantities in which it is present. We have a molecule of oxalic acid and we have to calculate it's molar mass. Oxalic acid is a organic molecule consisting of carbon, hydrogen and oxygen. The molecular formula for oxalic acid is C₂H₂O₄. The atomic mass of oxalic acid is the sum of atomic mass of 2 carbon atoms, 2 hydrogen atoms, and 4 oxygen atoms. Now atomic mass of carbon (C) atom = 12 g/mol, Atomic mass of Hydrogen (H) = 1 g/mol, and Atomic mass of oxygen (O) atom = 16 g/mol.

The molar mass of oxalic acid = (2 (C) + 2 (H) + 4 (O) )g/mol

Molar mass of oxalic acid = (2 (12) + 2 (1) + 4 (16)) g/mol

= 24 + 2 + 64 g/mol

= 90 g/mol

Hence, the required molar mass of oxalic acid is 90 grams per mole.

For more information about Molar mass, visit :

https://brainly.com/question/837939

#SPJ4

We would expect the J-value of proton B to also be 3.0 Hz.

What is the J-value constant?

In nuclear magnetic resonance (NMR) spectroscopy, J-value (also known as J-coupling or coupling constant) refers to the strength of the magnetic interaction between two neighboring nuclei. It is measured in Hertz (Hz) and represents the frequency difference between two energy states of the coupled nuclei.

J-coupling arises from the interaction between the magnetic moments of two nuclei when they are bonded to the same carbon atom in a molecule. The magnitude of the J-coupling constant depends on the distance and bond angle between the nuclei, as well as the electron distribution in the molecule.

If proton A couples to proton B with a J-value of 3.0 Hz, then proton B should also couple to proton A with the same J-value. This is because the J-coupling constant describes the strength of the interaction between the two coupled nuclei and is independent of which nucleus is being observed.

Therefore, we would expect the J-value of proton B to also be 3.0 Hz.

To learn more about the J-value constant:

https://brainly.com/question/21659935

#SPJ4

Ion-dipole is the attractive force connected to solid NaCl salt.

Define covalent bond.

While hydrogen bonds are intermolecular forces between the hydrogen atoms linked to a nitrogen, oxygen, or fluorine of one molecule and a negative dipole of another, covalent bonds are intramolecular forces that are often between two nonmetals.

These intramolecular forces are created by the ionic interactions that exist between the sodium cation and the chloride anion in the inorganic salt sodium chloride. Electrostatic attraction between oppositely charged ions causes them to coalesce into molecules. Ions are created when a species either loses or gets electrons to create a positively charged ion (also known as a cation) or a negatively charged ion (also known as an anion). Ion-dipole interaction is demonstrated by the interaction of a Na+ ion with water (H2O).

To learn more about Ion-dipole, use link below:

brainly.com/question/28098528

#SPJ1

Answer:

Ca

Explanation:

Element number 20

Answer:

Jagdish is 3 years younger than Resham and Rajesh is 5 years older than Jagdish. If the product of present age of Resham and Rajesh is 960.How old is Jagdish

The number of the ions in the  MgBr₂ to break down into in the water is the correct option is b. 3.

The ions dissociation of the MgBr₂ is follows :

MgBr₂  --->   Mg²⁺   +   2Br⁻

The MgBr₂ is the ionic compound. The ionic compound are formed between the atoms by the complete transfer of the electrons, The Mg is the metal and it has tendency to donate the electrons and the Br is the non metal and it has tendency to accept the electrons. The Mg donates the electrons and the Br accept the electrons and forms the ionic compound that is magnesium bromide.

To learn more about ions here

https://brainly.com/question/26677814

#SPJ4

If water molecules did not have a slight negative charge on one end and a slight positive charge on the other then Water would be incapable of freezing or boiling.

Water is an inorganic polar chemical. At room temperature, it is an odorless and tasteless liquid with a tinge of blue. This most basic hydrogen chalcogenide is unquestionably the most researched chemical compound and therefore is known as that of the "universal solvent" due to its propensity to dissolve a wide range of compounds.

If water molecules did not have a slight negative charge on one end and a slight positive charge on the other then Water would be incapable of freezing or boiling.

Therefore, water would be incapable of freezing or boiling.

To learn more about water, here:

https://brainly.com/question/16630851

#SPJ9