ASAP Even though the force exerted on each object in a collision is the same strength, if the objects have different masses, their will be different. * O changes in velocity O amount of force O speed and direction​

Answer:

A. force

Explanation:

Magnetism is a type of force.

Answer:

A. force

Hope this helps

Answer:

According to "http://ww2010.atmos.uiuc.edu"  Diffraction is the slight bending of light as it passes around the edge of an object.

Some examples of Light Defraction would be..

-CD reflecting rainbow colours

-Sun appears red during sunset

-From the shadow of an object

Answer:

Static electricity : is a familiar electric phenomenon in which charged particles are transferred from one body to another

Ohm's law : states that the voltage or potential difference between two points is directly proportional to the current or electricity passing through the resistance

Answer:

Conduction is the transfer of thermal energy through direct contact between particles of a substance, without moving the particles to a new location. Usually occurs in solids. When heat is supplied to one end, molecules at that end start to move more quickly.

Explanation:

Conduction is the transfer of heat and electricity through a material or surface. Generally, metals are good conductors of heat and electricity.

Conduction is the process through which heat energy is transmitted through the collisions which occur between neighboring atoms or molecules in a system. Conduction occurs more readily in the solids and liquid substances, where the particles are closer together than that of the gases, where the particles are further apart from each other.

Metals are good conductors of heat and electricity as they contain valence electrons and charge whereas non-metals are bad or poor conductors of heat and electricity as these elements does not contain valence electrons.

Learn more about Conduction here:

https://brainly.com/question/12136944

#SPJ2

The dependent variable is academic performance while the independent variable is presence/absence of tutorial support.

The correct results are:

In every experiment, there is a dependent and independent variable as well as an experimental and a control group.

The experimental group receive the treatment while the control group do not receive the treatment. The independent variable is manipulated and its impact on the dependent variable is evaluated.

The control group are students who did not receive the tutorial support while the experimental group are students that received the tutorial support.

The dependent variable in this case is academic performance. Its outcome depends on the presence or absence of tutorial support (independent variable).

Learn more: https://brainly.com/question/967776

I go to k12 too and i am writing this test now too. I am like pretty sure my answer is correct. I guess we can kinda help eachother with this assignment cuz i am sorta stuck too.

I dont know i hope this helped a bit I know its not much i need help with this too.

Answer:

A) car - 37500 kg*m/s, minivan - 13332 kg*m/s

B) 50832 kg*m/s

C) 18.83 m/s

Explanation:

Realize that sticky collisions are modeled by: m1v1+m2v2=(m1+m2) vf

conevert to m/s....car going 25 m/s, minivan going 11.11 m/s

A) p=mv

p(car)=(1500)(25)

p(car)=37500 kg*m/s

p(minivan)=(1200)(11.11)

p(minivan)=13332 kg*m/s

B) 37500+13332=50832 kg*m/s

C) 37500+13332=(1500+1200) vf

50832=2700(vf)

18.83 m/s = vf

Answer:

HERE IS YOUR ANSWER

Physical quantity => Unit

1)Length=>metre

2)Time=>second

3)Temperature=>Kelvin

4)mass=>kilogram

5)electric current=>ampere

6)luminous intensity=>candela

7)amount of substance=>mole

8)velocity=>m/s

9)acceleration=>m/s²

10)momentum=>kgm/s

11)density=>kg/m³

12)volume=>m³

13)force=>Newton(N)

14)Energy=>Joule(J)

15)Power=>Watt(W)

16)Pressure=>Pascal(Pa) or N/m²

17)Resistance=>ohm

18)Electrical potential=>volt(V)

19)plane angle=>radian

20)solid angle=>steradian

Explanation:

Physical quantity:-units

An inventor makes a clock using a brass rod and a heavy mass as a pendulum. when the clock gets colder then the time clock would gain time

The expansion of any material due to the variation of the temperature is known as thermal expansion. It varied differently for different materials according to their corresponding values of the coefficient of the thermal expansion.

As given in the problem statement that an inventor makes a clock using a brass rod and a heavy mass as a pendulum, when the clock gets colder then the length of the brass decreases due to thermal expansion.

The length of the pendulum gets reduced which further results in the reduction in the time period, as per the formula of the time period for the pendulum

T = 2π√(L/g)

As the length of the brass gets reduced. This means the pendulum of the clock moves faster and the clock would gain time

Thus, if a  pendulum made of a heavy mass and a brass rod is used to create a clock by an inventor. The time clock would advance in time as the clock get colder

Learn more about Thermal expansion here

brainly.com/question/14092908

#SPJ5

Answer:

D

Explanation:

Answer:

F = 1.07 x 10⁻⁷ N

Explanation:

The gravitational force of attraction between two objects can be found by the use of Newton's Gravitational Law:

[tex]F = \frac{Gm_{1}m_{2}}{r^2}\\\\[/tex]

where,

F = Gravitational Force of attraction = ?

G = Universal Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²

m₁ = m₂ = mass of spheres = 20 kg

r = distance between the objects = 50 cm = 0.5 m

Therefore,

[tex]F = \frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(20\ kg)(20\ kg)}{(0.5\ m)^2}\\\\[/tex]

F = 1.07 x 10⁻⁷ N

Your question is a "non sequitur", which means "it doesn't follow".

Your "then" doesn't contradict your "If", so no mystery is implied.

Maybe you're trying to say that matter is somehow not conserved in the equation . . . 4Fe + 302 → 2Fe203 . But it is.  There are 4 Irons and 6 Oxygens on each side, so conservation is not violated here.

I looked up "rust" on Floogle, and got slapped with pages and pages of chemistry that I don't completely understand.  But what it's saying is that rusting is a very complex chemical process, AND it doesn't happen unless there's some water involved.

So the bottom line is that there's a lot more going on than simply

4Fe + 302 → 2Fe203 ,

there's water going in and out of the process at every stage, and when it's all over, you have rusty iron, and mass has been conserved.

Answer:

a new chromebook for you and you will get to know the other one that

Explanation:

hi I like help but I couldn't

Explanation:

15m/s

acceleration= (+)

so, 15m/s +32m/s=47m/s

42m/s. X 8 = 336

Answer:

a)    σ = [tex]\frac{Q_1}{ a^2 - b^2}[/tex] ,  b)  σ = [tex]\frac{Q_2}{d^2}[/tex] , c) Q_ {total} = Q₁ + Q₂,  σ_ {net} = [tex]\frac{Q_1 + Q_2}{\pi \ a^2}[/tex]

Explanation:

a) The very useful concept of charge density is defined by

          σ = Q / A

In this case we have a circular disk

The are of a circle is

         A = π r²

in this case we have a hole in the center of radius r = b, so

         A_net = π r² - π r_ {hollow} ²

         A_ {net} = π (a² - b²)

whereby the density is

          σ = [tex]\frac{Q_1}{ a^2 - b^2}[/tex]

b) The density of the other disk is

          σ = Q₂ / A₂

          σ = [tex]\frac{Q_2}{d^2}[/tex]

c) The total waxed load is requested by the larger circle

           Q_ {total} = Q₁ + Q₂

the net charge density, in the whole system is

          σ = [tex]\frac{Q_{total} }{ A_{total} }[/tex]

the area  is

          A_{total} = π a²

since the other circle is inside, we are ignoring the space between the two circles

          σ_ {net} = [tex]\frac{Q_1 + Q_2}{\pi \ a^2}[/tex]

Answer:

Δx = distance between central bright fringe and first bright fringe = 19.85 x 10⁻⁴ m = 1.985 mm

distance between central bright fringe and second dark fringe = 2.978 mm

Explanation:

We have the following data:

λ = wavelength of light = 641 nm = 6.41 x 10⁷ m

L = Distance of Screen from slits = 3.19 m

d = slit separation = 1.03 mm = 1.03 x 10⁻³ m

Δx = distance between consecutive bright fringes = fringe spacing = ?

Using formula:

[tex]\Delta x = \frac{\lambda L}{d}\\\\\Delta x = \frac{(6.41\ x\ 10^{-7}\ m)(3.19\ m)}{1.03\ x\ 10^{-3}\ m}[/tex]

Δx = distance between central bright fringe and first bright fringe = 19.85 x 10⁻⁴ m = 1.985 mm

distance between central bright fringe and second dark fringe = 1.5Δx

distance between central bright fringe and second dark fringe = (1.5)(1.985 mm)

distance between central bright fringe and second dark fringe = 2.978 mm

Rhodium (Rh) is in period 5 on the periodic table. What does this tell you about this element ?

option - D

It has 5 energy levels/shells in its electron cloud.

With the information from the periodic table we can find that the correct statement is:

D. it is 5 energy level

The periodic table of the elements is a method of classifying the chemical elements based on their atomic number, it is divided into rows and columns

The rows are called the period and indicate the energy shell that is filled with electrons, all periods start with one electron and end when the shell is filled with 8 electrons.

The columns called groups correspond to elements that have the same number of electrons in their last shell, the chemical properties of the elements of the group are similar.

In this case we have an element the Rhodium, from period 5 and group VIIIB, when reviewing the period table it can be indicated that it has properties similar to cobalt and the inner layer is filled with two electors in its last layer.

When reviewing the different claims

a) False. The periodic table is not about molecules but about atoms

b) False. The metallic characteristics depend on the relationship between the number of electrons and the fermi level that is not indicated in the periodic table.

c) False. The number of protons is equal to the atomic number, in this case the rhodium has Z = 45, therefore it has 45 protons in the nucleus

d) True. It is at level 5 since the energy levels and the periods coincide.

In conclusion, with the information from the periodic table, we can find that the correct statement is:

D.  it is 5 energy level

learn more about the periodic table here:

https://brainly.com/question/13372254

Answer:

Pressure is the perpendicular force applied per unit area.

Answer:

ks= 133.2 N/m

Explanation:

       [tex]\Delta U + \Delta K = 0 (1)[/tex]

       [tex]k_{s} =\frac{m*v^{2}}{\Delta x^{2}} = \frac{29 kg*(3m/s)^{2}}{(1.4m)^{2}} = 133.2 N/M (4)[/tex]

Answer:

12: If the bird flies 10m in 2s, it's speed is then 10m/2s, which we can simplify giving us 5m/s

13: Flying 5000 km in eight hours means that it's flying at (5000 / 8)km/h, or 625km/h

14: A speed graph will not go below zero, an acceleration graph will.

I don't know the answer but I just want points sorry

Answer:

0.002 m/s

Explanation:

27.13(60) = 1,627.8 seconds

3.12/1,627.8 = 0.00191 ≈ 0.002 = s

Are you sure you're not looking for cm/s?

Answer:

es la 2

Explanation:

epero que te curva

Answer:

83.09 J

Explanation:

The potential energy at the point of the top of the jump is represented by the equation

[tex]mgdeltah[/tex]

when the dog jumps, all the potential energy converts to kinetic energy (1/2mv^2). Plugging in the values:

(7.7)(4.184)(1.1) = 83.0907 J

Answer:

. It is an extraordinarily rare, silvery-white, hard, corrosion-resistant, and chemically inert transition metal. It is a noble metal and a member of the platinum group.

Explanation:

Answer:

I know that story where the hare sleeps