Answer:
gexp = 3.65 m/s²
Explanation:
The value of acceleration due to gravity changes with the altitude. The following formula gives the value of acceleration due to gravity at some altitude from the sea level:
gexp = g(1 - 2h/Re)
where,
gexp = expected value of g at altitude = ?
g = acceleration due to gravity at sea level = 9.8 m/s²
h = altitude = 2000 km = 2 x 10⁶ m
Re = Radius of Earth = 6.37 x 10⁶ m
Therefore,
gexp = (9.8 m/s²)(1 - 2*2 x 10⁶ m/6.37 x 10⁶ m)
gexp = 3.65 m/s²
A car moves a distance of 2400 meters in 55 seconds What is the speed of
the car?
[tex]v = \frac{covered \: distance}{time \: of \: the \: covered \: distance} \\ [/tex]
[tex]v = \frac{2400}{55} \\ [/tex]
[tex]v = \frac{24 \times 100}{5 \times 11} = \frac{24 \times 20}{11} = \frac{480}{11} \\ [/tex]
[tex]v = 43.63 \: \: \frac{m}{s} [/tex]
_________________________________
And we're done...
♥️♥️♥️♥️♥️
Answer:
The average speed is about 44 m/s
Step by Step:
[tex]S= \frac{distance}{time}\\ d= 2400m\\t = 55 seconds\\\\\frac{2400m}{55 seconds}\\\\= approximately\\ 44 m/s[/tex]
I hope you found this helpful
A crowbar makes our work easier by multiplying effort true or false
Answer:
True
Explanation:
A crowbar makes our work easier by multiply effort because it belongs to first class lever.
And first class lever makes work easier by multiplying the effort
At a circus, a human cannonball is shot from a cannon at 15m/s at an angle of 40° above horizontal. She
leaves the cannon 2m off the ground and lands in a net 1m off the ground. What height does she reach?
How much ground distance does she cover?
Answer:
a
The height is [tex]H = 6.74 \ m [/tex]
b
The horizontal distance is [tex]D = 23.74 \ m [/tex]
Explanation:
From the question we are told that
The speed is [tex]v = 15 \ m/s[/tex]
The angle is [tex]\theta = 40^o[/tex]
The height of the cannon from the ground is h = 2 m
The distance of the net from the ground is k = 1 m
Generally the maximum height she reaches is mathematically represented as
[tex]H = \frac{v^2 sin^2 \theta }{2 * g } + h[/tex]
=> [tex]H = \frac{(15)^2 [sin (40)]^2 }{2 * 9.8} + 2[/tex]
=> [tex]H = 6.74 \ m [/tex]
Generally from kinematic equation
[tex]s = ut + \frac{1}{2} at^2[/tex]
Here s is the displacement which is mathematically represented as
s = [-(h-k)]
=> s = -(2-1)
=> s = -1 m
There reason why s = -1 m is because upward motion canceled the downward motion remaining only the distance of the net from the ground which was covered during the first half but not covered during the second half
a = -g = -9.8
[tex]u = v sin (\theta)[/tex]
So
[tex]-1 = (vsin 40 )t + \frac{1}{2} * (-9.8) t^2[/tex]
=> [tex]-4.9t^2 + 9.6418t + 1 = 0[/tex]
using quadratic formula to solve the equation we have
[tex]t = 2.07 \ s[/tex]
Generally distance covered along the horizontal is
[tex]D = v cos (40) * 2.07[/tex]
=> [tex]D = 15 cos (40) * 2.07[/tex]
=> [tex]D = 23.74 \ m [/tex]
Sally accelerates a 250 kg cart at 3 m/s/s. What must be
the net force?
What is this question asking you to find?
A car in front of the school goes from rest to 27 m/s in 3.0 seconds. What is its acceleration (assuming it is constant)?
Answer:
81 miles per hour
Explanation:
To get the answer, you should multiply 27 by 3, you should multiply distance by time to get the speed.
Answer:
9 m/s²
Explanation:
´Acceleration (a) is the change in velocity (Δv) over the change in time (Δt), represented by the equation a = Δv/Δt. This allows you to measure how fast velocity changes in meters per second squared (m/s^2). Acceleration is also a vector quantity, so it includes both magnitude and direction.´
3.The melting point of lead is 327.5 °C. Which of the following statements is correct? (1 Point) A)Lead is a gas at 280 °C B)Lead is a solid at 310 °C C)Lead is a liquid at 300 °C D)Lead is a solid at 390 °C
Answer:
B)Lead is a solid at 310 °C
Explanation:
The melting point of a substance refers to that temperature in which the substance changes state from solid to liquid. The melting point of a substance, which is usually a temperature value, is that actual temperature the change of state occurs.
According to this question, the melting point of Lead (Pb), which is naturally a solid metal, is 327.5°C. This means that LEAD (Pb) will only change to its liquid state at exactly 327.5°C and above. Therefore, at a temperature of 310°C, which is lower than lead's melting point, Lead element will still be a solid.
Answer: The correct answer is B. Lead is a solid at 310
Explanation:
A truck is moving at a constant speed of 50 m/s. A boy riding in the back of the truck throws a newspaper out the back of the truck at a speed of 20 m/s. What is the speed of the paper relative to someone standing on the roadside?
Answer:
70m/s
Explanation:
What force is needed to accelerate a 75 kg boy 3 m/s squared on a bike?
Answer:
The answer is 225 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × accelerationFrom the question we have
force = 75 × 3
We have the final answer as
225 NHope this helps you
What phase of the moon would this be?
1st quarter, waxing half moon
3rd quarter, waning half moon
waxing gibbous
waning gibbous
Answer:
First Quarter
Explanation:
A ball is thrown horizontally from a height of 1 m and lands 5 m away. What is the time of flight of the ball?
Answer:
The time of flight of the ball is approximately 0.4515 s
Explanation:
The given information are;
The vertical height, s = 1 m
The horizontal distance travelled, x = 5 m
The direction of the initial velocity = Horizontal
Given that the vertical height is known and the ball is in free fall, the time of flight, t, will depend on the vertical motion of the ball
The equation of motion of the ball can be presented as follows;
s = u·t + 1/2·g·t²
The initial vertical velocity = 0
∴ 1 = 1/2 × 9.81 × t²
t² = 1/(1/2 × 9.81 ) ≈ 0.20387 s²
t = √0.20387 = 0.4515 s
The time of flight of the ball ≈ 0.4515 s.
WHICH TYPES OF ENERGY ARE HAPPENING
Answer:
mecanichal energy
Explanation:
................
A bird can fly 25 km/hr. How long does it take to fly 10 km?
Answer:
25 minutes
Explanation:
I need help with all these. Number them pleaseee
Energy that Is transferred from a warmer object to a cooler object is called what?
Answer:
The movement of heat from a warmer object to a cooler one is called heat transfer.
Imagine you are on an airplane. Your plane has flown from 30 degrees North to 42 degrees North. How far have you flown?
How do liquids and gases transfer heat?
A.by radiation
B.by conduction
C.by air movement
D.by convection
Answer:
D.by convection
Explanation:
Liquids and gases primarily transfer heat through convection. The correct answer is option (D). which is convection.
Convection is the process of heat transfer through the movement of a fluid (liquid or gas). When a fluid is heated, its molecules become energized and move more rapidly, causing the fluid to expand and become less dense. The less dense, warmer fluid then rises while the cooler, denser fluid sinks.
In the case of liquids, this movement is often referred to as natural convection. In gases, convection can occur in two ways: natural convection and forced convection.
Natural convection occurs when the heated gas rises due to its decreased density, while the cooler gas descends. Forced convection involves the use of external forces, such as fans or pumps, to create airflow and enhance heat transfer.
Therefore, Liquids and gases primarily transfer heat through convection. The correct answer is option (D). which is convection.
To know more about the convection:
https://brainly.com/question/4138428
#SPJ6
With the arrangement of colors of ROYGBIV, what is its arrangement based on its energy?
Answer:
red,orange,yellow,green,blue,indigo,violet
Explanation:
Answer:
Longest to shortest wavelength or Highest to lowest frequency
Base your answer to this question on the information below and on your knowledge of physics.
A wave traveling through a uniform medium has an amplitude of 0.20 meter, a wavelength of 0.40 meter, and a frequency of 10 hertz.
Determine the period of this wave.
What’s the period of this wave ?
Answer:
T=1/f
= 1/10
= 0.1 s
v = wavelength × frequency
= 0.40m × 10 Hz
= 4ms^-1
T = wavelength / velocity
= 0.04m / 4 ms^-1
= 0.1 m
Explanation:
so first i used the formula T=1/f and i found that the period, T is 0.1s
and secondly , to check whether i got the correct answer , i used a different formula
i used the formula T = wavelength / velocity
but there's an unknown in it , that's the velocity
so to find the velocity , i used the formula v = wavelength × frequency
when i've done the calculation , the second value of T is same as the first value of T
so , the value of the period, T is 0.1s
The worker’s pull on the handle of the cart can best be described as a force having
Group of answer choices
magnitude, only
neither magnitude nor direction
direction, only
both magnitude and direction
Answer:
both magnitude and direction
Explanation:
The worker's pull on the handle of the cart is best described as the force having both magnitude and direction.
This is a vector quantityThe force is channeled to move the cart in a specific direction. Also, the pull on the cart can be quantified, and so it have magnitude. Most physical properties either have magnitude or direction or both.In this case, the worker is pulling the cart towards a specified direction.
Therefore, the fitting choice is both magnitude and direction.
WHICH TYPES OF ENERGY IS HAPPENING
Answer:
kinetic energy turned potential energy
Explanation:
it moves up the hill and stops so the movement is kinetic energy and the stop is potential energy
3. Tyrone wants to determine how fast a bowling ball travels when it is bowled. He uses a stopwatch to
record, in seconds, the time it takes for the bowling ball to reach the pins. Which unit would be most
appropriate to measure the length of the bowling lane?
A. meters
B. kilometers
C. millimeters
D. centimeters
A ball with a mass of 0.5 kg is hit with a force of 2.5 N what is its acceleration?
Explanation:
50 m/s may squared siya sa dun sa may s
Hurricanes hit
regions more frequently because of the close proximity to large bodies of water.
Coastal
Mountainious
Midwestern
At speed, the car accelerated at 1.5 acceleration for 6 seconds. What way did the car go during acceleration?
Answer:
The car would be going forward
Explanation:
Acceleration means there is an increase in the rate or speed of something. And this case it is a vehicle.
Which of the following correctly lists the energy conversions that happen when you plug a fan into an electrical outlet and turn it on?
A: chemical, nuclear, potential
B: sound,thermal, kinetic
C:sound,nuclear,electrical
D:chemical,sound,fission
a car drives 16 m east, then 25 m south, then 16 m west. calculate the distance travelled by car
Answer:
16m + 25m + 16m = 57m
the car travelled 57 m
You want to figure out which brand of microwave popcorn pops the most kernels so you can get the most value for your money. You test different brands of popcorn to see which bag pops the most popcorn kernels. What is the dependent variable?
A. Number of kernels popped
B. The brand of microwave
C. The brand of popcorn
D. The type of popcorn
Answer:
A
Explanation:
I think the number of kernels popped is depended on the brand of the microwave or it can be the brand of popcorn but the independent variable is the cause and the dependent variable is the effect
The dependent variable is the Number of kernels popped option (A) Number of kernels popped is correct.
What is dependent variable?In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables.
Dependent variables get their name because, during an experiment, their values are investigated under the presumption or requirement that they are dependent on the values of other variables according to some law or rule.
The brand of microwave or popcorn brand may affect how many kernels pop, but the independent variable is the cause and the dependent variable is the outcome.
Thus, the dependent variable is the Number of kernels popped option (A) Number of kernels popped is correct.
Learn more about the dependent variable here:
https://brainly.com/question/1479694
#SPJ6
Describe a ways car manufacturers try to reduce drag and why.
Aerodynamics is a way to reduce drag that uses car manufacturers.
What is aerodynamic ?
Aerodynamics is the motion of the air. airplane flies cause of aerodynamics.
Aerodynamics is the study of forces that are resulted by motion of the air.
To reduce the aerodynamic drag further, the manufacturers use character lines on the exteriors of the car's body right from its concept stage. These lines help the air to pass smoothly over the body and thus, reducing the air resistance.
cars have flat vertical face in front. When it moves through air, drag force directly proportional to the velocity applies on the car which opposes motion of the car. after studding aerodynamics when we make triangular like shape to the front body of the car, it cuts the air and front air goes from side of the car which reduces oppose to the motion, and car can have more speed.
To know more about aerodynamic :
https://brainly.com/question/3800219
#SPJ3.
We are constantly surrounded by many types of energy transfers and transformations, showing that energy in a system is conserved. Which of these statements are true about how energy is conserved through transfers and transformations? Choose the two that apply. A. Energy is conserved when a lamp is turned on because some of the electrical energy is transferred into thermal energy. B. Energy is conserved when thermal energy is transferred from your body to a coat. C. Energy is conserved when some of the chemical energy from burning a candle is transformed into thermal energy, while the rest of the chemical energy is transformed into light energy. D. Energy is conserved when electrical energy from a hair dryer is transferred into thermal energy and then transformed by conduction.
Answer:
Energy is conserved when some of the chemical energy from burning a candle is transformed into thermal energy, while the rest of the chemical energy is transformed into light energy.
Energy is conserved when thermal energy is transferred from your body to a coat.
Explanation:
The principle of conservation of energy states that energy can neither be created nor destroyed, but can be transformed from one form to another. This can be regarded as the first law of thermodynamics.
In the answer, we see two major kinds of energy transformation around us. The both cases show the conservation of energy in a system.
7. The position equation, x = x0 + v0t + 1/2at^2, has three terms. Write down the physical significance for each of the three.
Answer:
X0 is the initial position of the object
V0 t is the displacement of the object in time t due to its initial velocity
1/2 a t^2 is the displacement of the object in time t due to its acceleration
Adding the 3 terms (being careful with signs) gives the final position of the object at time t