a weak acid is 33 issociated at ph 5.0. what is the pka for this acid?

The mass number of phosphorus is found to be 31 based on number of proton and neutron

The atomic number is equal to the number of protons in the atom's nucleus (Z). In a neutral atom, there are precisely as many electrons as protons. The total number of protons and neutrons in the atom's nucleus is equal to the mass number (M) of the atom. The isotopic mass is calculated using the mass number, which is expressed in atomic mass units (u).

Atomic number = number of proton => 15

number of neutron = 16

Mass number of  phosphorus = 15 + 16 = 31

The mass of an atom is determined by adding the numbers of protons and neutrons. It is represented by the letter "A." The number of protons in an atom's nucleus or the number of electrons in an uncharged atom is the atomic number of that atom.

Learn more about mass number here:

brainly.com/question/18803094

#SPJ4

Answer:Transcript A liquid’s vapor pressure is directly related to the intermolecular forces present between its molecules. The stronger these forces, the lower the rate of evaporation and the lower the vapor pressure.

Explanation:

As vapors are produced more from a liquid there will be more cooling effect as vapors are inversely proportional to the boiling point that means lesser the boiling point better will be the evaporation.

Intermolecular forces are the forces present between the molecules and liquid’s vapor pressure is directly related to the intermolecular forces as well . The stronger these forces, the lower the rate of evaporation and the lower the vapor pressure.

Therefore, the relationship between the vapor pressure of a liquid and how well it cools by evaporation is having direct proportionality.

Learn more about evaporation, here:

https://brainly.com/question/5019199?referrer=searchResults

#SPJ2

The chemical equation for the burning of methane and oxygen is: CH4 + 2O2 → CO2 + 2H2O.

The burning of methane and oxygen is an oxidation-reduction reaction, which is a reaction that involves the transfer of electrons between the atoms, molecules, or ions involved. In this reaction, the methane molecules (CH4) donate electrons to the oxygen molecules (2O2), which results in the formation of carbon dioxide (CO2) molecules and water (2H2O) molecules.

Learn more about oxygen molecules (2O2)

https://brainly.com/question/28620771

#SPJ4

Identify each part of this chemical equation, which describes the burning of methane and oxygen:

A (the entire green box):

B (the blue box):

C (the arrow):

D (the number):

E (the purple box):

The following statements correctly describe a net ionic equation:

a. The positive and negative ions dissociate from each other.

c. The attraction between the H2O molecules and the ions is stronger than the attraction of the ions for each other.

define ionic equation ?

An ionic equation is a chemical equation that shows the species in a chemical reaction as ions, rather than as neutral molecules. It is a balanced equation that only includes species that undergo a chemical change during the reaction, and it ignores the species that are present in the reaction but remain unchanged. Ionic equations are used to describe reactions that occur in aqueous solution, where ions are dissolved in water. The ionic equation shows the formation of positive and negative ions from neutral species, the transfer of electrons between ions, and the precipitation or dissolution of ions. It provides a more detailed representation of the reaction than a molecular equation, which only shows the reactants and products as neutral molecules.

To learn more about ionic equation follow the given link: https://brainly.com/question/27892358

#SPJ4

The mass percent composition of 2.45 g of calcium in 3.43 g of calcium oxide is 28.54%.

To determine the mass percent composition of calcium in calcium oxide, we can calculate the mass of calcium in the calcium oxide sample and express it as a percentage of the total mass of the sample.

First, let's find the mass of calcium that reacted:

mass of calcium = 3.43 g - mass of oxygen = 3.43 g - (2.45 g - mass of calcium) = 0.98 g

Next, let's find the percent of calcium in the calcium oxide:

mass percent of calcium = (mass of calcium / mass of calcium oxide) x 100%

mass percent of calcium = (0.98 g / 3.43 g) x 100%

mass percent of calcium = 28.54%

So the mass percent composition of calcium in calcium oxide is 28.54%.

Learn more about mass percent composition here: https://brainly.com/question/20393858

#SPJ4

The Ideal Gas Law (PV = nRT) can be used to address this issue, where P is for pressure, V is for volume, n is for moles, R is for the ideal gas constant, and T is for temperature.

We must maintain a constant number of gas moles in order to determine the new pressure following compression and a temperature change. The equation (P1V1)/T1 = (P2V2)/T2 can be used to show the relationship between the initial and final pressure and volume. Calculate P2, the new pressure, by plugging in the provided numbers. Keep in mind to change the temperature and volume units to Kelvin.

P2 × V2 = n × R × T2

P2 = (n × R × T2) / V2 = (n × R × 352) / 28.4

Learn more about Ideal Gas Law:

brainly.com/question/28257995

#SPJ4

The subshell to which an electron would have to be added to make a -1 anion.Hg 4f 5d H 1s 1s X 5s 4p Ne 3s 2p K 4s 3p.

The charge of an electron, which is commonly thought to be negative, is equal to and the opposite of the charge of a proton, which is typically thought to be positive. Because there are more electrons than protons in an ion's total charge, the net charge is not zero. An anion is a negatively charged ion that has more electrons than protons compared to a positively charged ion called a cation. Because they have opposing electric charges, cations and anions are drawn to one another by electrostatic force, which makes it easy to create ionic compounds. Atomic ions are distinct from molecular ions, which are composed of two or more atoms and are also known as multi-atom ions.

To know more about anion please refer:

https://brainly.com/question/15578817

#SPJ4

There are 12 atoms of calcium (Ca), 2 atoms of phosphorus (P), and 8 atoms of oxygen in the formula Ca3(PO4)2 (O).

The elements calcium (Ca), phosphorous (P), and oxygen are combined to form the chemical calcium phosphate (O). Dicalcium phosphate, tricalcium phosphate, and octacalcium phosphate are only a few of its many types. Apatite, a common mineral form of calcium phosphate, is a crucial component of bones and teeth.

The number of atoms in Calcium Phosphate can be determined by multiplying the coefficient of each element with the number of atoms in the empirical formula, which gives the chemical formula Ca3(PO4)2. Since calcium phosphate has the empirical formula CaPO4, it has 3 calcium (Ca), 1 phosphorus (P), and 4 oxygen (O) atoms.

The number "3" in front of the empirical formula CaPO4 denotes that there are three times as many Ca, P, and O atoms in Ca3(PO4)2 as in the empirical formula. As a result, the following formula can be used to determine how many Ca, P, and O atoms are present in Ca3(PO4)2:

3 calcium (Ca) atoms plus 1 phosphorus (P) atom plus 4 times 2 oxygen (O) atoms equals 12 calcium (Ca) atoms plus 2 phosphorus (P) atoms plus 8 oxygen atoms (O)

As a result, there are 12 atoms of calcium (Ca), 2 atoms of phosphorus (P), and 8 atoms of oxygen in the formula Ca3(PO4)2 (O).

To know more about calcium phosphate, visit:

https://brainly.com/question/29231164

#SPJ4

The wavelength of a photon that has an energy of 4.41x10−19 found to be 6.65 x 10^14m.

A single photon has an energy of hv or = (h/2), where h is the Planck constant of 6.626 x 10^-34 Joule-sec. A visible light photon does have an energy content of 10–19 Joules.

E=hλ

h = 6.626 × 10^-34 m^2 kg / s

=> 4.41x10^−19 = 6.626 × 10^-34 x λ

 => λ = 6.65 x 10^14m

At the atomic scale, the movement of particles and waves is described by Planck's constant. One of the variables that contributed to the creation of quantum mechanics is Planck's constant.

Both matter and light are influenced by this. The intensity of electromagnetic radiation (such as blackbody radiation) released by a heated object is determined by the equation E = hf, according to Planck's quantum theory (lambda)

Learn more about wavelength here:

brainly.com/question/16103569

#SPJ4

Hexane (C6H14) or calcium chloride (CaCl2) are more soluble in carbon tetrachloride, CCl4. Therefore, option A is correct.

The maximum amount of a substance that will dissolve in a given amount of solvent at a given temperature is defined as solubility. Solubility is a property of a specific solute-solvent combination, and the solubilities of different substances vary greatly.

Because hexane and carbon tetrachloride have similar attractive intermolecular forces, their molecules can mix readily, calcium chloride and hexane dissolves in carbon tetrachloride.

Thus, Hexane (C6H14) or calcium chloride (CaCl2) are more soluble in carbon tetrachloride, CCl4 because it can form London forces, option A is correct.

To learn more about the solubility, follow the link;

https://brainly.com/question/28170449

#SPJ1

A great example of green chemistry and sustainability is the use of sustainable materials in manufacturing and construction.

Sustainable materials, such as bamboo, cork, and recycled plastic, are used to make furniture, packaging, and building materials. By using sustainable materials, not only are fewer pollutants released into the environment but resources are also preserved as they can be reused and recycled. The use of sustainable materials also requires less energy to create, leading to fewer greenhouse gas emissions.

Additionally, the use of sustainable materials often requires fewer toxic chemicals or compounds, reducing the potential for contamination of the environment. Chemistry is involved in the development and production of sustainable materials, as well as in the development of processes and treatments to ensure that the materials are safe for use. Therefore, chemistry plays an important role in supporting sustainability, as it allows for the production of materials and processes that are safer for the environment.

Read more about Green chemistry:

https://brainly.com/question/13254083

#SPJ4

Relative atomic mass (Ar) or atomic weight is defined as the ratio of the average mass of atoms of a chemical element in a particular sample to the atomic mass constant.

One-twelfth of the mass of an atom of carbon-12 is the atomic mass constant, denoted by the symbol mu. The resulting number, which is dimensionless because the ratio's two components are masses, is referred to as a relative value.

Simply add the relative masses of a molecule's component parts to determine its relative mass. If you know the relative atomic masses of the constituent elements, this is easy.

Therefore, The weighted average of a molecule's mass in relation to one-twelfth of the mass of a carbon-12 atom is known as the relative molecular mass (Mr or RMM).

Learn more about atomic mass here:

https://brainly.com/question/17067547

#SPJ4

Allura red is a food colouring that is widely found in processed foods and beverages. Hydrogen bonding and dipole-dipole interactions are the intermolecular forces between Allura red and water molecules.

The forces of attraction or repulsion that exist between nearby molecules are referred to as intermolecular forces. These forces are important in influencing the properties of substances like solubility and reactivity of Allura red and water-based solutions.

When a hydrogen atom covalently bound to a highly electronegative atom (such as nitrogen or oxygen) is attracted to an electronegative atom in another molecule, hydrogen bonding occurs. Hydrogen bonds can occur between the hydrogen atoms in water molecules and the nitrogen or oxygen atoms in the dye molecule in the instance of Allura red and water.

The attraction between the positive ends of one molecule and the negative ends of another molecule causes dipole-dipole interactions. The dye molecule in Allura red and water has a permanent dipole moment due to the difference in electronegativity between the carbon and nitrogen atoms, and the water molecule also has a dipole moment. These two dipoles can interact, causing the molecules to attract one another.

For more such questions on intermolecular forces.

https://brainly.com/question/9007693#

#SPJ11

A polypeptide with the net positive charge at the physiologic pH of 7.4 most likely contains the amino acids with R groups of the type id Basic R type.

The Basic amino acids possess the net positive charge at the physiological pH of 7.4. The Basic amino acids have the extra amino group in the side of the chain that can release the H⁺ ions into the solution results in the formation of ion of NH₃⁺

The acidic amino acids have the extra amino group in the side of the chain that can release the H⁺ ions into the solution resulting in the formation of COO⁻ ion.

To learn more about amino acids here

https://brainly.com/question/30351953

#SPJ4

Valence electrons are affected by the nuclear protons' attractive positive charge. Due to shielding effect, the effective nuclear energy is always smaller than the total amount of protons in a nucleus.

The net charge an electron encounters in an atom with many electrons is known as the effective nuclear charge. Zeff= Z - S can be used to approximate the effective nuclear charge. where S is the amount of shielding electrons and Z is indeed the atomic number.

The kind of electron determines the effective nuclear charge. Even in 4s or 5s orbitals, electrons in sh orbitals still spend time directly at the nucleus, where they experience the entire nuclear force.

To know more about Valence electrons visit :

https://brainly.com/question/28977387

#SPJ4

D is the correct answer. One of the peaks overlaps with the sp C-H peaks.

Fermi doublets are small peaks in nuclear magnetic resonance (NMR) spectra caused by nuclei of two adjacent atoms in a coupling. They are frequently difficult to identify due to their small size in comparison to other peaks in the NMR spectrum. Furthermore, one peak in the doublet can overlap with other peaks in the spectrum, particularly sp3 C-H peaks, making the Fermi doublet difficult to distinguish from other peaks. This can lead to the Fermi doublet being missed or misinterpreted in NMR analysis, resulting in errors in peak assignment and molecular structure identification.

To Learn More About Fermi doublet click

https://brainly.com/question/766457

#SPJ4

The number of the  moles of TiCl₄ can be produced when 9.00 mol Ti reacts with 4.00 mol Cl₂ is 2 mol.

The balanced chemical equation is as follows :

Ti + 2Cl₂ → TiCl₄

The mole of the Ti = 9 mol

The moles of the Cl₂ = 4 mol

1 mole of the Ti react with the 2 mole of the Cl₂

Mole of the Cl₂ = 2 × 4

                         = 8 mol

We need mol of the Cl₂ , but we have only 4 mol. Cl₂ is the limiting reagent.

The moles of the TiCl₄ = (1/2) 4

The moles of the TiCl₄ = 2 mol

To learn more about moles here

https://brainly.com/question/14488136

#SPJ4

Answer:

flashlight I think I'm sorry if I'm wrong

The lattice energy of KBr is -682 kJ/mol. When 3. 406 g of KBr is dissolved in water, 0. 569 kJ of heat is absorbed.  The enthalpy of hydration of KBr is -681.431 kJ/mol

The amount of energy generated during the hydration process of one mole of ions is known as the heat of hydration. It is a particular kind of dissolution energy, and water is the solvent.

When 1 mole of an anhydrous substance mixes with the necessary quantity of water molecules to form the hydrate, the shift in heat is known as the enthalpy of a hydrated salt. If the temperatures of salt solutions containing both the anhydrous and hydrated forms are known, the heat of hydration can be calculated.

Lattice energy  KBr= -682 kJ/mol

Heat of solution = 0. 569 kJ

enthalpy hydration = lattice energy + heat of solution

enthalpy hydration = -682 kJ/mol + 0. 569 kJ

enthalpy  hydration = -681.431 kJ/mol

Learn more about enthalpy of hydration at https://brainly.com/question/30481805

#SPJ4

In this reaction, copper sulfate (CuSO4) reacts with sodium hydroxide (NaOH) to form copper hydroxide (Cu(OH)2) and sodium sulfate (Na2SO4).

In a chemical reaction, reactants undergo a chemical reaction and transform into products through a chemical process. For instance, when humans breathe in oxygen, it combines with glucose to create carbon dioxide, water, and energy.

When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction.

To know more about Chemical Reaction visit:

https://brainly.com/question/29039149

#SPJ4

To determine the percentage of ligands in a coordination compound, you calculate the ratio of the number of ligands to the total number of atoms in the complex and convert that to a percentage.

Ligands are atoms or molecules that bond to a central metal ion in a coordination compound to form a coordination complex.

To determine the percentage of ligands in a coordination compound, you need to first calculate the ratio of the number of ligands to the total number of atoms in the complex.

To do this, you simply count the number of ligands in the compound and divide that number by the total number of atoms in the complex. The resulting ratio is then multiplied by 100 to convert it to a percentage.

For example, if a coordination compound has 4 ligands and 6 total atoms, the percentage of ligands would be calculated as:

(4 ligands / 6 total atoms) x 100 = 67% ligands

So in this case, 67% of the atoms in the compound are ligands.

To know more about ligands here:

https://brainly.com/question/2980623#

#SPJ11

Assuming ideal gas behavior, the molar mass of the gas can be calculated using the equation: molar mass = density * volume * molar mass of air.

For this calculation, the density is 1.21 g/L, the volume is 1 L, and the molar mass of air is 28.9 g/mol. This gives a molar mass of 30467922 g/mol for the gas.

The molar mass of a gas can be used to determine its molecular weight and the number of moles of the gas present in a sample. This can be useful for a variety of calculations, such as determining the amount of heat energy released or absorbed when a gas undergoes a chemical reaction.

Learn more about molar mass

https://brainly.com/question/21334167

#SPJ4

[tex]6.3*10^{11}[/tex] electrons would have to be removed from a coin to leave it with charge of [tex]+1*10^{-7}[/tex] C

The molecules are typically ionized by either removing an electron or by adding a proton once they are in the gas phase and enter the mass spectrometer. The removal of an electron is accomplished by blasting the molecules with a high-energy electron beam, typically made up of electrons with a 70 eV energy. Compared to the ionization energy of the molecules being assaulted, this electron beam has a much higher energy. The method is referred to as electron ionization (EI). Since the resultant ion has one unpaired electron, it is a radical ion.

According to the question,

∣q∣ = [tex]1*10^{-7}[/tex] C, we know charge of an electron is [tex]1.6*10^{-19}[/tex] C

∴ number of electrons (n) = [tex]\frac{q}{e}[/tex] = [tex]\frac{1*10^{-7}}{1.6*10^{-19}}[/tex] = [tex]6.3*10^{11}[/tex] (Ans)

To know more about electrons

brainly.com/question/6283462

#SPJ4

The complete question is:

How many electrons would have to be removed from a coin to leave it with a charge of [tex]+1*10^{-7}[/tex] C ?

The three characteristics of a scientific theory are : testable, the falsifiable predictions, theories are supported by the observation.

The scientific Theory is the model that can explains the facts about the nature on the basis of the observations, the experimentation and reasoning. The scientific theories have the characteristics as follows :

1) It is testable

2) The falsifiable predictions,

3) The theories are based on facts

4)  The theories are based on observation.

5) The theories are modify according to the new observation.

The scientific theory is the theory based on the evolution that holds all the present life descended.

To learn more about  scientific theory here

https://brainly.com/question/2375277

#SPJ4

A structural isomer of 3-ethyl-3-methylhexane is 2-ethyl-3-methylhexane. Structural isomers have the same molecular formula, but a different arrangement of atoms in the molecule.

In this case, both 3-ethyl-3-methylhexane and 2-ethyl-3-methylhexane are hexanes (C6H14) with three carbon chain isomers and one ethyl and one methyl group. However, in 3-ethyl-3-methylhexane, the ethyl and methyl groups are attached to the 3rd carbon, while in 2-ethyl-3-methylhexane, they are attached to the 2nd and 3rd carbons, respectively.

A structural isomer is a type of isomer where the same number of atoms are present, but the arrangement of these atoms within the molecule is different. As a result, structural isomers have different physical and chemical properties, despite having the same molecular formula.

To learn more about structural isomer please click on below link.

https://brainly.com/question/13107500

#SPJ4

26.981539 u is the molar mass of aluminium .

What is molar mass ?

Molar mass is the mass of one mole  of a substance, defined as its atomic or molecular mass in grams.  It is defined as the number of units (atoms, molecules, ions, etc.) in a substance that contains the same number of units as 12 grams of pure carbon-12. The molar mass of a substance is important because it provides a conversion factor between the mass of a substance and the number of moles of a substance, allowing chemical reactions and composition of compounds to be more easily calculated. Molar mass can be calculated by summing the atomic masses of all atoms in a molecule of a substance. For example, the molar mass of water (H2O) is 18.015 g/mol. This means that 1 mole of water weighs 18.015 grams .

To know more about molar mass , click the link below ;

https://brainly.com/question/837939

#SPJ4

Troponin has a binding site for calcium ions. Troponin is a protein complex that regulates muscle contraction in both skeletal and cardiac muscles.

It is composed of three subunits: troponin C, troponin I, and troponin T. Troponin C has a binding site for calcium ions and is responsible for the regulation of muscle contraction. When calcium ions bind to troponin C, it causes a conformational change in the troponin complex that allows the interaction of actin and myosin filaments, leading to muscle contraction. Troponin I acts as an inhibitor of muscle contraction by blocking the interaction of actin and myosin filaments, and troponin T helps anchor the complex to the tropomyosin molecule on the actin filament. Troponin plays a critical role in the regulation of muscle contraction and its level in the blood can be used as a biomarker for various cardiac conditions, such as heart attacks and heart failure.

Learn more about calcium ions here: brainly.com/question/28504818

#SPJ4

Complete question:

Which molecule of the thin filament has a binding site for calcium ions?

Because the rate of reaction depends on the reactant concentration, which changes over time, the rate does not stay constant during the whole reaction. Hence, statement (D) is False.

The average rate of reaction is constant throughout a specified amount of time, hence it is impossible for it to provide any insight into the rate of reaction at a certain moment. The immediate pace of response enters the picture at this point. Reactant concentrations often drop with time as reactants are transformed into products, which causes reaction rates to slow down. In general, reaction rates rise as reactant concentrations do.

To know more about the rate of reaction:

https://brainly.com/question/8592296

#SPJ4

In a benzene molecule, there are three sigma bonds and six pi bonds.

What is benzene molecule?

Benzene has the molecular formula C6H6 and is an organic chemical compound. It is a highly aromatic, colorless, and flammable liquid that is widely used as a solvent and as a starting material for the production of many industrial chemicals.

Its molecule consists of a planar hexagonal arrangement of six carbon atoms, each bonded to one hydrogen atom and to two neighboring carbon atoms via a double bond. These double bonds are called pi bonds, while the single bonds between the carbon atoms and hydrogen atoms are called sigma bonds.

The stability of the molecule is due to the delocalization of electrons in the six pi bonds, which gives rise to its characteristic aromatic fragrance and stability.

To know more about benzene molecule, visit: https://brainly.com/question/13731563

#SPJ4

The pH of the solution is 3.17. So, the pH of a solution containing 0.03M benzoic acid and 0.02M Nabenzoate is 3.17.

Acidity and basicity of a solution are important physical-chemical properties that determine the behavior of the solution. The pH of a solution is a measure of its acidity and is defined as the negative logarithm of the concentration of hydrogen ions (H+) in the solution.

(a) To determine the pH of a 0.6M solution of benzoic acid, we need to calculate the concentration of H+ ions in the solution. Benzoic acid (C6H5COOH) is a weak acid and therefore dissociates partially in solution to form H+ ions and the corresponding anion (C6H5COO-). The dissociation of benzoic acid can be represented by the following equation:

C6H5COOH <=> H+ + C6H5COO-

The dissociation constant (Ka) of benzoic acid is given as 6.5 × 10^(-4), which indicates the strength of the acid in solution. The concentration of H+ ions in the solution can be calculated using the equation:

[H+] = Ka * [C6H5COOH] / [C6H5COO-]

Using the initial concentration of benzoic acid (0.6M), we can calculate the concentration of H+ ions in the solution:

[H+] = 6.5 × 10^(-4) * 0.6 / (1 - 0.6) = 3.9 × 10^(-4)

Finally, the pH of the solution can be calculated as:

pH = -log[H+] = -log(3.9 × 10^(-4)) = 3.41

So, the pH of a 0.6M solution of benzoic acid is 3.41.

(b) To determine the pH of a solution containing 0.03M benzoic acid (pKa 3.19) and 0.02M Nabenzoate, we need to consider both the weak benzoic acid and the salt (Nabenzoate) in the solution. The weak benzoic acid will dissociate to form H+ ions and the corresponding anion (C6H5COO-), and the salt will dissociate to form Na+ ions and benzoate (C6H5COO-).

The total concentration of H+ ions in the solution can be calculated using the following equation:

[H+] = [C6H5COOH] + [C6H5COO-]

We know the initial concentration of benzoic acid (0.03M) and the initial concentration of Nabenzoate (0.02M), so we can calculate the concentration of H+ ions in the solution as:

[H+] = 0.03 / (1 + (10^(pKa - pH))

Where pH is the unknown pH of the solution. We can iteratively solve for pH by adjusting the [H+] until it equals the calculated value.

Here you can learn more about determine the pH

https://brainly.com/question/12442009#

#SPJ11