A package of weather instruments is attached to a weather balloon. The package has a mass of 12.4 kg. The system is released vertically from rest. The weather balloon provides a constant lift force of 122.5 N for 6.00 minutes.

Calculate the magnitude and direction of the instruments acceleration during the first 6 minutes of flight (ignore air resistance).

Answer should be 0.0790m/s^2

Answer:

To determine the distance traveled in 22 seconds, we can use the formula:

distance = speed * time

First, we need to convert the speed from km/hr to m/s, which is the standard unit for measuring speed in physics.

1 km/hr = 1000/3600 m/s = 5/18 m/s

So, 650.0 km/hr = 650.0 * 5/18 m/s = 130.9 m/s

Next, we can calculate the distance traveled in 22 seconds:

distance = speed * time = 130.9 m/s * 22 s = 2860.8 m

So, the plane has traveled 2860.8 meters in 22 seconds.

Explanation:

Without the nutcracker, Luisa would have to use significantly more force to crack the walnut. Because the nutcracker acts as a lever, the force applied to the handles is multiplied by the force applied to the walnut.

The mechanical advantage is 11.7 cm / 0.3 cm = 39 because the lever arm length is 12 cm - 0.3 cm = 11.7 cm.

This means that the force on the walnut is 39 times the force on the handles, or 21 N x 39 = 819 N. This is a much greater force than the 21 N applied to the handles with the nutcracker, implying that Luisa would have to work much harder to crack the walnut without it.

To Learn More About force click

https://brainly.com/question/26115859

#SPJ4

Bernoulli's principle is valid for steady-state, incompressible, non-viscous fluid flow So option D is correct.

Bernoulli's principle states that as the speed of a fluid increases, its pressure decreases, and vice versa. This relationship is based on the conservation of energy in a fluid flow, where the sum of potential and kinetic energy remains constant along a streamline.

For Bernoulli's principle to hold true, certain assumptions must be made about the fluid flow:

Steady-state flow: The fluid flow must be steady, meaning that the fluid velocity and pressure at any given point must be constant over time.

Incompressible flow: The fluid must be incompressible, meaning that its density remains constant as it flows through a pipe or channel.

Non-viscous flow: The fluid must have a low viscosity, meaning that it experiences little friction as it flows.

These assumptions are necessary because Bernoulli's principle is based on the idea of a fluid flowing smoothly and without interruption. In real-world fluid flows, these assumptions are often only approximately true, and the principle must be adjusted accordingly. However, for many applications, the ideal fluid flow assumptions provide a useful starting point for understanding fluid behavior.

So, the correct answer is D) All of these.

To learn more about Bernoullie's principle, visit:

https://brainly.com/question/13098748#

#SPJ11

The volume of a 25 ft x 10 ft x 12 ft cargo container is 111.1 cubic yards (3000 cubic feet divided by 27).

Volume is the three-dimensional space occupied by an object or a substance. It is the measure of the amount of space an object takes up and is typically expressed in units such as cubic centimeters, cubic meters, cubic feet, or cubic yards.

The volume of the cargo container can be found by multiplying its length, width, and height:

V = 25 ft × 10 ft × 12 ft = 3000 ft³

To convert from cubic feet to cubic yards, divide by 27:

Volume calculation: 111.1 yd³ = (3000 ft³ / 27).

So the volume of the cargo container is 111.1 cubic yards.

Learn more about volume:

https://brainly.com/question/22907480

#SPJ4

If the mass is released with an initial displacement of 2 cm then:

(a) the amplitude = 0.03184

(b) the initial velocity = 0.7779 m/s

(c) the maximum acceleration = -0314 m/s²

(d) the phase angle = -51.087°

The pace at which speed changes is known as acceleration. Acceleration typically, but not always, indicates a change in speed. Because the direction of an object's velocity is shifting even while it follows a circular course, it continues to accelerate.

The most important metric for determining an object's position and rate of movement is its velocity. The distance that an object travels in a certain amount of time might be used to define it. The object's displacement in a unit of time is referred to as velocity.

[tex]$$Solution) Maximum Velocity, $v=10 \mathrm{~cm} / \mathrm{s}$ $1 \mathrm{~cm} / \mathrm{s}=0.01 \mathrm{~m} / \mathrm{s}$$$\begin{aligned}& v=10 \times 0.01 \mathrm{~m} / \mathrm{s} \\& \mathrm{v}=0.10 \mathrm{~m} / \mathrm{s}\end{aligned}$$Period of oscillation, $\mathrm{T}=2 \mathrm{~s}$Initial displacement, $x=2 \mathrm{~cm}$$1 \mathrm{~cm}=0.01 \mathrm{~m}$$$\begin{aligned}& x=2 \times 0.01 \mathrm{~m} \\& x=0.02 \mathrm{~m}\end{aligned}$$[/tex]

[tex]$$(a) Amplitude, $A=$ ?$$\begin{aligned}& \mathrm{v}=\mathrm{A} \omega \\& \omega=\frac{2 \pi}{\mathrm{T}}=\frac{2 \pi}{2}=\pi=3.14 \\& \mathrm{v}=\mathrm{A} \omega \\& 0.1=\mathrm{A}(3.14) \\& \mathrm{A}=\frac{0.1}{3.14} \\& \mathrm{~A}=0.03184\end{aligned}$$[/tex]

[tex]$$(b) Initial velocity, $\mathrm{u}=$ ?$$\begin{aligned}& \mathrm{u}=-\omega \mathrm{A} \sin (\omega \mathrm{t}-\phi) \\& \mathrm{At}, \mathrm{t}=0 \\& \mathrm{u}=-\omega \mathrm{A} \sin (0-\phi) \\& \mathrm{u}=-\omega \mathrm{A} \sin (-\phi)\end{aligned}[/tex][tex]$$We need to find phase angle$$\\\begin{aligned}& \mathrm{x}=A \cos (\omega \mathrm{t}-\phi) \\& \text { At } \mathrm{t}=0 \\& 0.02=0.03184 \cos (-\phi) \\& \phi=-{A_{cos}\left(\frac{0.02}{0.03184}\right) \\& \phi=-51.087^{\circ} \\& \mathrm{u}=- \omega A \sin (-\phi) \\& \mathrm{u}=-3.14 \times 0.03184 \times \sin (-51.087) \\& \mathrm{u}=0.07779 \mathrm{~m} / \mathrm{s}\end{aligned}$$[/tex]

[tex]$$(c) Maximum acceleration, $\mathrm{a}=$ ?$$\begin{aligned}\mathrm{a} & =-\omega_2 . \mathrm{A} \\\mathrm{a} & =-(3.142)(0.03184) \\\mathrm{a} & =-0.314 \frac{\mathrm{m}}{\mathrm{s} 2}\end{aligned}$$(d) Phase angle,$$\phi=\text { ? }$$From part(b)$$\phi=-51.087^{\circ}$$[/tex]

Thus, If the mass is released with an initial displacement of 2 cm then:

(a) the amplitude = 0.03184

(b) the initial velocity = 0.7779 m/s

(c) the maximum acceleration = -0314 m/s²

(d) the phase angle = -51.087°

Learn more about acceleration from the given link.

https://brainly.com/question/460763

#SPJ4

The required height a car can coast up if the work done by friction is negligible and its initial speed is specified is calculated to be 33.90 m.

Initial speed of the car is given as 94 km/h.

We know that, 1 km/h = 0.277 m/s

So, u = 94 km/h = 94(0.277) = 26.038 m/s

Let the height gained by the car be h.

The final speed of the car will be zero at the height h.

v² = u²- 2 g h

So, v = 0 m/s

g = 10 m/s²

0² = 26.04²- 2 × 10 × h

20 h = 678.08

h = 33.90 m

To know more about speed:

https://brainly.com/question/13771760

#SPJ4

When they are anti-parallel to one another, the dipole has the highest electric potential energy.

Think about a dipole with charges q1 = +q and q2 = -q that is set up in the same uniform electric field as in the previous figure. There is a gap between the charges, and the electric field's strength is E.

As shown in the figure, the charges' respective forces are given as -qE and +qE.

Knowing that a dipole experiences a torque equal to, which can be expressed as  = p*E, when it is placed in a uniform electric field rather than a force,

Taking into account that the potential energy is located at the initial angle

To know more about dipole visit;

brainly.com/question/13612849

#SPJ4

The test to determine the convergence or divergence of a series is the Leibniz test for alternating series. The Leibniz test states that if the series has alternating signs.

and the terms decrease in absolute value, then the series converges. If the terms do not decrease in absolute value, the series diverges. In the series [infinity] (−1)n ln(9n) n = 2, the terms have alternating signs and the function ln(9n) increases as n increases.The test to determine the convergence or divergence of a series is the Leibniz test for alternating series. The Leibniz test states that if the series has alternating signs. This means that the terms do not decrease in absolute value, so the series diverges. Therefore, the series [infinity] (−1)n ln(9n) n = 2 is divergent.

learn more about divergent  here:

https://brainly.com/question/13701343

#SPJ4

90.72 kilograms are equal to 200 pounds.A kilogram weighs 90.718474 pounds. The United States of America and the British commonwealths typically measure weight in pounds.

The imperial and American customary systems of measurement both use the pound as a weight or mass unit. It is typically abbreviated as "oz" for the troy or apothecary pound and "lb" for the avoirdupois pound. 16 ounces, 7,000 grains, or 0.45 kilograms make up one pound. It is frequently utilized for weighing meats, fruits, vegetables, and other foods. The pound is also used as a currency in the United Kingdom.

90.72 kilograms are equivalent to 200 pounds.

Divide the number of pounds by 2.2 to make the conversion from pounds to kilograms.

This is because 2.2 pounds are equivalent to 1 kilogram.

Therefore, 90.72 kg is the result of 200 divided by 2.2.

Learn more about weight pound :

brainly.com/question/29555156

#SPJ4

The diffusivity of a gas in another gas is a measure of the rate at which the two gases mix. At room temperature (25℃), the diffusivity of a gas in another gas can be increased by a factor of 10 by raising the temperature.

The diffusivity of a gas in another gas is proportional to the square root of the temperature. This relationship is known as Graham's law of effusion. Graham's law states that the rate of effusion of a gas is inversely proportional to the square root of its molecular weight. This can be extrapolated to diffusivity by assuming that the molecular weight of the two gases is similar, and that the effusion rate is proportional to the diffusivity.

Therefore, to increase the diffusivity of a gas in another gas by a factor of 10, the temperature must be increased by a factor of 10^2 = 100. This would require a temperature increase of 100 * 25℃ = 2500℃.

It is important to note that this calculation assumes that the gases are dilute and ideal, meaning that they obey the ideal gas law and do not interact with each other. In real-world situations, the diffusivity of a gas in another gas can be affected by factors such as pressure, molecular weight, and intermolecular interactions.

Here you can learn more about the diffusivity of a gas

https://brainly.com/question/23804077#

#SPJ11

The term best describes their probability of making it Unlikely.

Probability is a number that expresses the likelihood or chance that a specific event will take place. Both proportions ranging from 0 to 1 and percentages ranging from 0% to 100% can be used to describe probabilities.

Given,  A statistician tells a coach that his team has a 32% chance of making it to the World Series.

Since,

Thus in our case,

The term best describes their probability of making it Unlikely.

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ1

To calculate Larry's average velocity during two intervals, we need information on his displacement (change in position) and time during those intervals. The average velocity is given by the formula:

v = Δx / Δt

where Δx is the displacement and Δt is the time.

Without knowing the specific values for Δx and Δt, it is not possible to calculate Larry's average velocity during each of the two intervals.

It is important to note that velocity is a vector quantity that includes both magnitude and direction. The displacement Δx must be in the same direction as the velocity, while the time Δt must be positive.

If the direction of motion changes during the interval, then the average velocity will be different for each interval and will not necessarily be equal to the final velocity.

In conclusion, to calculate Larry's average velocity during two intervals, we need to know the displacement and time during those intervals. The formula for average velocity is given by v = Δx / Δt, where Δx is the displacement and Δt is the time. Without knowing the specific values for Δx and Δt, it is not possible to calculate Larry's average velocity.

To know more about Larry's average: https://brainly.com/question/29563388

#SPJ4

The technique in the above image is a form of asexual reproduction (option A).

Reproduction is the act of making copies of new individuals biologically.

Asexual reproduction is a type of reproduction which a new offspring is produced by a single parent. The new individuals produced are genetically and physically identical to each other.

Asexual reproduction is observed in both multicellular and unicellular organisms. According to the image attached above, a cutting of a parent plant is used to produce a new organism, hence, is a form of asexual reproduction.

Learn more about asexual reproduction at: https://brainly.com/question/4100787

#SPJ1

97.6°F to C = 36.4444°C

Calculation:

97.6°F = (97.6 - 32) × 5/9 = 36.4444°C

how is Farenheit defined?

Fahrenheit is a temperature scale used in the United States and a few other countries. It is based on the work of German physicist Daniel Gabriel Fahrenheit, who began his work in 1724. On the Fahrenheit scale, 0 degrees is the freezing point of a solution of brine made from equal parts of ice and salt, and 100 degrees is the temperature of the human body. Other important temperatures on the scale include 32 degrees, the freezing point of water, and 212 degrees, the boiling point of water. The Fahrenheit scale is still used in the United States today due to its familiarity to many American citizens.

Therefore, 97.6°F to C = 36.4444°C

To learn more about Farenheit

Here: https://brainly.com/question/30391112

#SPJ4

The radius of the circle (r)=0.25 kmLInear distance (S)=1 km(a)Now the angular distanceθ=Srθ=10.25θ=4 rad(b)Now,π rad=180∘1 rad=180π∘Thereforeθ=(4 rad)180∘π radθ=229.183∘

52 degrees Celsius in Fahrenheit is 125.6 Fahrenheit. Temperature conversion from Celsius to Fahrenheit is done by, multiplying by 1.8 (or 9/5) and add 32.

What is Temperature?

Temperature, like any other physical quantity, is defined as the measurement of a substance's or object's warmth or coldness in relation to some standard value. While it is used to express hot and cold conditions, temperature is usually measured with a thermometer that is marked in several temperature scales, the most common of which are Celsius and Fahrenheit. There are several other temperature units.

What is SI Unit of Temperature?

According to the International System of Units, the SI unit of temperature is Kelvin, which is represented by the symbol K. In the fields of science and engineering, the Kelvin scale is widely accepted or used. However, in most parts of the world, temperature is measured using the Celsius or Fahrenheit scale.

To learn more about Temperature, visit: https://brainly.com/question/26866637

#SPJ4

The type of electromagnetic radiation would be observed:

(a) a star with a temperature of 5800 K = the visible spectrum's green component.

(b) a gas heated to a temperature of one million K = the electromagnetic spectrum's X-ray component.

(c) a person on a dark night = the electromagnetic spectrum's infrared region.

Wien's law states that the wavelength in nanometers at which a blackbody emits the most energy is given by the relationship:

(a) λ max = b/T

Where,

λ max = wavelength (m)

b = = Wien's displacement constant (2.898 × 10⁻³ mK)

T = temperature (K)

Hence,

λ max = (2.898 × 10⁻³) / 5800

= 500 nm

(b)

One million = 1000.000 K

= 10⁶ K

λ max = (2.898 × 10⁻³) / (1 x 10⁶)

= 2.898 nm

(c)  a person on a dark night:

Temperature of the human body = 37°C

= 37 + 273.15

= 310.15 K

λ max = (2.898 × 10⁻³) / 310.15

= 934 nm

Learn more about electromagnetic radiation here: https://brainly.com/question/1408043

#SPJ4

The scientific method is a systematic approach to solving problems in science. It involves formulating a hypothesis, designing experiments to test it, analyzing the data collected, and reporting the results.

The hypothesis is a testable assertion that foretells how an experiment will turn out. In order to collect data and test the theory, experiments are conducted. The data is then examined in order to make inferences and assess the hypothesis. Finally, the findings are presented in clear and plain terms to the scientific community.The scientific method is a methodical approach to problem-solving and decision-making in science. This is a general explanation of the process. It entails the following actions:

you can learn more about hypothesis at:

brainly.com/question/29519577

#SPJ4

Nickel-60 is made of 28 protons and 32 neutrons.

The mass defect = [tex]9.14 x 10^-25 grams.[/tex]

The mass of a body is a natural property. It was widely believed, prior to the discovery of the atom and particle physics, to be connected to the volume of matter in a physical body. It was found that different atoms and elementary particles, although theoretically having the same amount of matter, have different masses.

Different but physically equivalent conceptual definitions of mass are used in modern physics. Experimental definitions state that a body's mass is a measure of its inertia, or resistance to acceleration (change in velocity), when a net force is applied. An object's mass also affects the gravitational pull it exerts on other bodies.

There are 28 protons and 32 neutrons in nickel-60.

28 x 1.00728 = 28.20384 amu

32 x 1.00867 = 32.27744 amu

adding above = 60.48128 amu

subtract Ni = -59.9308 amu

mass defect = 0.55048 amu

1 amu =[tex]1.66053886 × 10^-24 grams[/tex]

So the mass defect = [tex]9.14 x 10^-25 grams[/tex]

To learn more about nucleus follow the given link: https://brainly.com/question/141626

#SPJ4

In aerodynamics, the coefficient of profile drag (Cd) for a flat plate is a frequently used reference measure, and its value depends on the flow circumstances. Cd values for flat plates typically vary from 0.0015 to 0.0050. This value is corrected by a correction factor of 1.75 to account

A dimensionless integer called the coefficient of profile drag (Cd) is used to measure the aerodynamic resistance of an object moving through a fluid, most often air. It is the proportion of the drag force exerted on an item to the dynamic fluid coefficient and the object's reference area. The form, size, direction, and speed of the item, together with the fluid characteristics and flow conditions, all affect the value of Cd. An item with a low Cd value is more aerodynamically efficient, producing less drag and encountering less resistance as it moves through the fluid. On the other side, an item with a high Cd value will produce more drag and be less aerodynamically effective. The Cd rating

Learn more about coefficient here:

https://brainly.com/question/28975079

#SPJ4

The KL46Z processor's unique datasheet and specs will determine the maximum DC current that can be pulled from an I/O pin.

The maximum DC current that may be pulled from an I/O pin on a KL46Z CPU varies based on the individual device's specs, which are shown in the datasheet for the processor. The maximum DC current that can be pulled from an I/O pin is technical information on the electrical properties and specifications of the processor included in the KL46Z datasheet. The maximum DC current is affected by a number of variables, including the power supply voltage, the processor's internal resistance, and the amount of power used by other parts. It's critical to read the datasheet in its entirety .

Learn more about current here:

https://brainly.com/question/13076734

#SPJ4

The acceleration of a cart with a steel ball suspended by two cords are 1/3√3 g.

Please refer to the attached picture below.

From the picture, we know that:

m = steel ball m

Θ = 60°

TA = tension cord A

TB = tension cord B

TA = 2TB

a = cart acceleration

First, we need to draw and define every forces working on the system. Note that the ball is in its static position on its y-axis and only moves on the x-axis.

We will focus on the y-axis first. Since there is no movement on the y-axis, we will use Newton's First Law, where:

∑F = 0

TAy + TBy - m.g = 0

TAy + TBy = m.g

TA sin Θ + TB sin Θ = m.g

2TB sin Θ + TB sin Θ = m.g

3 TB sinΘ = m.g

3 TB sin 60° = m.g

3TB (√3/2) = m.g

TB = 2m.g/3√3 ...  (i)

Next, we will focus on the x-axis. Since there is an acceleration on the x-axis, hence we will use Newton's Second Law where:

∑F = m.a

TAx - TBx = m.a

TA cos Θ - TB cosΘ = m.a

2TB cosΘ - TB cosΘ = m.a

TB cosΘ = m.a

2m.g/3√3 (cos 60°) = m.a

2m.g/3√3 (1/2) = m.a

a = 1/3√3 g

Learn more about Acceleration here: brainly.com/question/11881120

#SPJ4

The radial component of acceleration of a particle moving in a circular path is always directed towards the center of the path.

What is the meaning of acceleration?

The rate at which velocity changes is called acceleration. Acceleration typically indicates a change in speed, but not necessarily. An item that follows a circular course while maintaining a constant speed is still moving forward because the direction of its motion is shifting.

Acceleration occurs in the direction of the velocity change, which is the same direction that the circular path's center of rotation points. The centripetal acceleration typically has a negative sign in vector form. This is due to the centripetal acceleration, which is along the radius vector pointing toward the center of the circular motion, being in the opposite direction to that of the radius vector.

To learn more about acceleration use link below:

https://brainly.com/question/460763

#SPJ4

The sun provides the energy that propels water transport in plants.

Photosynthesis is the process by which plants convert light energy into chemical energy that is stored in glucose. This glucose is converted into ATP (adenosine triphosphate), which serves as an energy source for various metabolic processes in the plant, including water transport.

Water is absorbed by the plant's roots and transported upward through the stem and leaves via a process known as transpiration. This process is powered by ATP, which provides the energy required to drive water movement from the roots to the rest of the plant.

So the sun provides the energy for water transport in plants, which is converted into chemical energy through photosynthesis and stored in the ATP.

To Learn More About energy click

https://brainly.com/question/8630757

#SPJ4

Answer: It increase because THE OZONE LAYER ABSORBS THE GREATER PART OF THE SOLAT ULTRAVIOLET RADIATION.

Explanation:

To determine the initial velocity of the vehicles after the collision, we need to find the momentum of each vehicle before the collision and the total momentum after the collision.

The momentum of the car before collision = mass x velocity

= 1.4 x 103 kg x 37.0 km/hr

= 52.18 x 103 km/hr

The momentum of the truck before collision = mass x velocity

= 2.0 x 10 kg x 35 km/hr

= 70.0 x 10 km/hr

Total momentum before collision = momentum of car + momentum of the truck

= 52.18 x 103 kgm/hr + 70.0 x 10 km/hr

= 52.25 x 103 km/hr

After the collision, the two vehicles lock together and form a combined mass of (1.4 x 103 kg) + (2.0 x 10 kg) = 3.4 x 103 kg

Initial velocity after collision = total momentum / combined mass = 52.25 x 103 kgm/hr / 3.4 x 103 kg = 15.37 km/hr

Therefore, the initial velocity of the vehicles after the collision is 15.37 km/hr.

To Learn More About velocity click

https://brainly.com/question/18084516

#SPJ4

A basic pendulum consists of a large object suspended from a fixed support by a string.

It usually hangs vertically when it is in equilibrium. The pendulum bob is the loving name for the large object. The bob starts vibrating back and forth about its fixed equilibrium point when it is pulled out of equilibrium and subsequently released.

The motion is periodic because it is regular and keeps repeating. In an earlier section of this lesson, we discussed pendulum motion in an effort to better grasp how vibrating things work.

We revisited the topic of the oscillation of a pendulum while examining the mathematical characteristics of periodic motion.

Therefore, A basic pendulum consists of a large object suspended from a fixed support by a string.

To learn more about Pendulum, refer to the link:

https://brainly.com/question/14759840

#SPJ1

So the speaker's power output is approximately 2773.99 watts.

The power output of a speaker can be calculated from the sound intensity level and distance using the equation:

P = 10^(I/10) / (4 * pi * d^2)

where P is the power output in watts, I is the sound intensity level in dB, and d is the distance in meters. Substituting the given values, we get:

P = 10^(108/10) / (4 * pi * 17^2)

P = 10^10.8 / (4 * pi * 289)

P = 3162277.7 / (4 * pi * 289)

P = 3162277.7 / 1140

P = 2773.99 W

A motor's output power is calculated by multiplying its torque output by the angular velocity of its output shaft. The power lost by an electrical component in a circuit is also a function of the voltage across the component and the current that flows through it.

For such more question on output power

https://brainly.com/question/20038729

#SPJ4

Awanita's power output is 8watts

When expressed as an hourly rate of electric energy delivery, power output refers to the average rate of electric energy supply during one metering interval.

To find the power output:

First we find workdone= Force × distance

Given: F=20N , d= 200cm converting to meter: (200/100)m=2m

W= 20×2=40Joules

Power,P= workdone/ time

Given: time=5seconds

P= 40/5= 8 watts

Read more about power (watts) here:

https://brainly.com/question/25781540

#SPJ1

The moment of inertia of a rod with respect to an axis perpendicular to its length and passing through its end can be calculated as follows:

I = (1/12) * mL^2,

where m is the mass of the rod and L is its length.

The moment of inertia of a point mass at a distance r from the axis of rotation can be calculated as follows:

I = mr^2.

In this case, the maximum moment of inertia occurs when the two larger weights are placed at the ends of the rod and the pivot point is placed at the middle. This way, both weights are located as far away from the axis of rotation as possible and thus contribute the maximum amount to the moment of inertia.

The moment of inertia in this case can be calculated as:

I = (1/12) * mL^2 + m_1 * (L/2)^2 + m_2 * (L/2)^2

= (1/12) * 2.2 * 1.6^2 + 0.25 * (1.6/2)^2 + 1.0 * (1.6/2)^2

= 0.53 kg m^2.

This is the maximum possible moment of inertia for this system.

Learn more about the moment of inertia here: https://brainly.com/question/29353886

#SPJ4