A penguin waddles along the central axis of a concave mirror, from the focal point to an effectively infinite distance. (a) How does its image move? (b) Does the height of its image increase continuously, decrease continuously, or change in some more complicated manner?

Answer:We can use the Pythagorean theorem to find the initial speed of the cannonball. The initial speed is the hypotenuse of a right triangle with legs equal to the initial horizontal and vertical velocities:

initial speed = sqrt((initial horizontal velocity)^2 + (initial vertical velocity)^2)

Plugging in the values given in the problem, we get:

initial speed = sqrt((39 m/s)^2 + (27 m/s)^2)

initial speed = sqrt(1521 m^2/s^2 + 729 m^2/s^2)

initial speed = sqrt(2250 m^2/s^2)

initial speed = 47.43 m/s

Therefore, the initial speed of the cannonball is 47.43 m/s (rounded to two decimal places).

Explanation:

The initial speed of the cannonball is approximately 47.43 m/s when a cannonball is shot (from ground level) with an initial horizontal velocity of 39 m/s.

To find the initial speed of the cannonball, we need to combine its initial horizontal and vertical velocities using the Pythagorean theorem.

Step 1: Identify the given values.

Initial horizontal velocity (Vx) = 39 m/s

Initial vertical velocity (Vy) = 27 m/s

Step 2: Apply the Pythagorean theorem.

Initial speed (V) = [tex]\sqrt{(Vx^2 + Vy^2)}[/tex]

Step 3: Plug in the given values and solve for the initial speed (V).

V = [tex]\sqrt{((39 m/s)^2 + (27 m/s)^2)}[/tex]

V =[tex]\sqrt{(1521 + 729)}[/tex]

V = [tex]\sqrt{2250}[/tex]

V ≈ 47.43 m/s

To learn more about velocity click here https://brainly.com/question/17127206

#SPJ11

The stone's acceleration is constant but its velocity is increasing.

When the stone is dropped off a cliff and is in free fall, it experiences a constant acceleration due to gravity.

This means that every second that the stone is falling, its acceleration is the same.

However, the stone's speed is not constant because it is increasing due to the acceleration.

The stone's velocity, which is its speed and direction, is also changing because it is moving in a downward direction. As the stone falls, it gains more velocity and its speed increases, but its direction remains the same.

Therefore, the correct answer is that the stone's acceleration is constant but its velocity is increasing.

For more such questions on acceleration , click on:

https://brainly.com/question/460763

#SPJ11

The energy loss between the two pressure gauges is approximately 148.70 feet.

To find the energy loss between the two pressure gauges, we need to consider the specific gravity, pressure readings, and the conversion factors.

We need to convert the pressure readings from psig (pounds per square inch gauge) to psi (pounds per square inch). Since gauge pressure already accounts for atmospheric pressure, we can use the psig values directly:
P1 = 115 psig
P2 = 60 psig

Now, we need to convert psi to feet of head using the specific gravity of the oil:
Head1 = P1 × 2.31 / Specific Gravity
Head2 = P2 × 2.31 / Specific Gravity

Using the given specific gravity (0.86):
Head1 = (115 × 2.31) / 0.86 ≈ 309.40 ft
Head2 = (60 × 2.31) / 0.86 ≈ 160.70 ft

Finally, we calculate the energy loss between the two gauges by subtracting the head values:
Energy Loss = Head1 - Head2
Energy Loss = 309.40 ft - 160.70 ft
Energy Loss ≈ 148.70 ft

To know more about energy loss, click here

https://brainly.com/question/9366703

#SPJ11

The mechanical energy of a block-spring system having a spring constant of 1.5 N/cm and an oscillation amplitude of 3.9 cm is 11.41 J

The mechanical energy of a block-spring system can be found by using the formula:

E = 1/2 kA²

Where E is the mechanical energy, k is the spring constant (1.5 N/cm), and A is the amplitude of oscillation (3.9 cm).

Plugging in the values, we get:

E = 1/2 (1.5 N/cm) (3.9 cm)²

E = 1/2 (1.5 N/cm) (15.21 cm²)

E = 11.41 N cm or J (Joules)

Therefore, the mechanical energy of the block-spring system is 11.41 Joules.

Alternatively, to find the mechanical energy of a block-spring system, you can use the formula for the potential energy stored in the spring:

E = (1/2)kA²

where E is the mechanical energy, k is the spring constant (1.5 N/cm), and A is the oscillation amplitude (3.9 cm).

E = (1/2)(1.5 N/cm)(3.9 cm)²
E = 0.75 N/cm × 15.21 cm²
E = 11.41 N*cm

The mechanical energy of the block-spring system is 11.41 N*cm.

More on mechanical energy: https://brainly.com/question/31732604

#SPJ11

The water leaves the sprinkler holes at a speed of approximately 1.994 m/s.

To determine the speed at which water leaves the sprinkler holes, you can use the principle of continuity, which states that the product of the cross-sectional area and the speed of the fluid is constant in a continuous flow system. In this case, the garden hose and the sprinkler holes form a continuous flow system.

Step 1: Calculate the cross-sectional area of the garden hose.
Area_ hose = π × (diameter _hose / 2)²
Area_ hose = π × (0.021 m / 2)²
Area_ hose ≈ 0.00034636 m²

Step 2: Calculate the cross-sectional area of a single sprinkler hole.
Area_ hole = π × (diameter _hole / 2)²
Area_ hole = π × (0.0028 m / 2)²
Area_ hole ≈ 6.1542e-6 m²

Step 3: Calculate the total cross-sectional area of all 24 sprinkler holes.
Area_ total = Area_ hole × number_ of_ holes
Area_ total = 6.1542e-6 m² × 24
Area_ total ≈ 0.0001477 m²

Step 4: Apply the principle of continuity to find the speed of the water leaving the sprinkler holes.
Area_ hose × speed_ hose = Area_ total × speed_ holes
speed _holes = (Area_ hose × speed_ hose) / Area_ total
speed_ holes = (0.00034636 m² × 0.85 m/s) / 0.0001477 m²
speed_ holes ≈ 1.994 m/s

To know more about principle of continuity :

https://brainly.com/question/30789807

#SPJ11

The third charged particle must be placed at x = 70.00 cm on the x-axis to experience no net electrostatic force due to the other two particles.

To find the position on the x-axis where a third charged particle would not experience any net electrostatic force due to the other two particles, we need to use Coulomb's Law:

[tex]F = k q1 q3 / r1^2 - k q2 q3 / r2^2 = 0[/tex]

where F is the net electrostatic force on the third particle, k is Coulomb's constant, q1 and q2 are the charges of the two particles, r1 and r2 are their distances from the third particle, and q3 is the charge of the third particle.

Since the third particle is on the x-axis, we can simplify the equation to:

[tex]k q1 q3 / x^2 - k q2 q3 / (100 - x)^2 = 0[/tex]

Solving for x, we get:

x = 100 q2 / (q1 + q2)

Plugging in the values given in the problem, we get:

x = 100 (7.00 μC) / (5.00 μC + 7.00 μC) = 70.00 cm

Learn more about electrostatic force here:

https://brainly.com/question/9774180

#SPJ11

The angular width of the second-order visible spectrum produced by the plane grating with 600 lines per millimeter is approximately 33 degrees.

2λ = d(sinφ)

Rearranging for φ, we get:

φ = sin⁻¹(2λ/d)

For the shortest wavelength in the visible spectrum (violet), λ = 400 nm. Plugging in the values, we get

φ(violet) = sin⁻¹(2(400 nm)/(1.67 μm)) = 43.5°

φ(red) = sin⁻¹(2(700 nm)/(1.67 μm)) = 76.5°

The angular width of the second-order visible spectrum is the difference between these two angles:

Δφ = φ(red) - φ(violet) = 33°

Spectrum refers to the range of electromagnetic radiation or energy that is emitted or absorbed by a particular object or substance. Electromagnetic radiation includes a broad range of energy types, from low-energy radio waves to high-energy gamma rays, which are all characterized by their wavelength or frequency. The spectrum can be broken down into different regions, such as the visible spectrum, which includes the colors of the rainbow, or the infrared and ultraviolet spectra, which are beyond our visible range.

Spectroscopy is the study of spectra, and it is used in a wide variety of fields, from astronomy to chemistry to materials science. By analyzing the spectrum of light emitted or absorbed by an object, scientists can determine a wealth of information about the object's composition, temperature, and other properties. Spectroscopy has revolutionized our understanding of the universe, allowing us to study everything from the composition of distant stars to the behavior of individual atoms.

To learn more about Spectrum visit here:

brainly.com/question/6836691

#SPJ4

Without knowing the specific reaction being referred to, it is difficult to provide a specific answer.

However, in general, the major product(s) of a reaction will depend on the starting materials, the reagents and conditions used, and the reaction mechanism. In terms of explaining the reaction, it is important to consider the functional groups and their reactivity, as well as any stereochemistry involved. Additionally, the reaction mechanism and any intermediates formed will also be important factors to consider. If you provide more specific details about the reaction in question, I may be able to provide a more detailed explanation and draw the product(s) for you.

Learn more about specific reaction here:

https://brainly.com/question/29889220

#SPJ11

The concept that best explains why your hand hurts is inertia.

When you carry a heavy bag of groceries and accidentally bang your hand against a wall, the concept that best explains why your hand hurts is inertia.

Inertia is the tendency of an object to resist changes in its state of motion, which includes changes in speed and direction.

When your hand hits the wall, it suddenly stops moving while the rest of your body is still in motion, causing a force to be exerted on your hand.

This sudden change in motion results in a painful sensation in your hand.

While gravity and resistance may play a role in other physical scenarios, inertia is the most relevant concept to explain this specific situation.

For more such questions on inertia , click on:

https://brainly.com/question/1140505

#SPJ11

The angle between the resultant force and the smaller force is approximately 46.1 degrees.

To solve this problem, we will use the Law of Cosines, which states that in any triangle, c^2 = a^2 + b^2 - 2ab*cos(C), where a, b, and c are the sides of the triangle, and C is the angle opposite side c.
In this case, the sides of the triangle are the two forces and the resultant force: a = 55 pounds, b = 97 pounds, and c = 113 pounds. We need to find the angle C between the resultant force and the smaller force (side a).
1. Substitute the given values into the Law of Cosines formula: 113^2 = 55^2 + 97^2 - 2*55*97*cos(C).
2. Calculate the values: 12769 = 3025 + 9409 - 10670*cos(C).
3. Subtract the constants: 335 = 10670*cos(C).
4. Divide by 10670: cos(C) = 335/10670 ≈ 0.0314.
5. Find the inverse cosine: C ≈ acos(0.0314) ≈ 46.1 degrees.

So, the angle between the resultant force and the smaller force is approximately 46.1 degrees.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ11

The Microwaves are a type of electromagnetic radiation with wavelengths ranging from approximately 1 millimeter to 1 meter. The frequency of a wave is directly proportional to its wavelength, so we can determine the frequency range of microwaves by finding the frequencies corresponding to these wavelengths.

The formula relating frequency and wavelength is c = λf where c is the speed of light, λ is the wavelength, and f is the frequency. Rearranging this formula to solve for frequency, we get f = c / λ Substituting the given wavelength range, we get f = c / 1.0 mm = 3 x 10^11 Hz f = c / 1.0 m = 3 x 10^8 Hz Therefore, the frequency range of microwaves that encompasses wavelengths from 1.0 mm to 1.0 m is approximately 3 x 10^8 Hz to 3 x 10^11 Hz. Microwaves have a wide range of applications, including communication, cooking, and scientific research. Due to their relatively short wavelengths, they are able to penetrate many materials, making them useful in fields such as medical imaging and non-destructive testing. However, exposure to high levels of microwaves can be harmful to human health, so precautions should be taken when working with these types of radiation.

learn more about wavelength here.

https://brainly.com/question/20713544

#SPJ11

When the current I1 in loop 1 is increasing, an induced current is generated in loop 2 according to Faraday's law of electromagnetic induction. The direction of the induced current in loop 2 can be determined using Lenz's law,

which states that the induced current flows in a direction that opposes the change in the magnetic field that produced it.

In this case, the increasing current I1 in loop 1 produces a magnetic field around the loop, which passes through loop 2. To oppose this change in the magnetic field passing through loop 2, an induced current is generated in loop 2 that produces a magnetic field that opposes the magnetic field produced by loop 1.

Using the right-hand rule for electromagnetic induction, we can determine that the induced current in loop 2 will flow in the opposite direction to the current in loop 1. Therefore, the correct answer is:

B. The opposite direction as I1.

Learn more about   current    here:

https://brainly.com/question/13076734

#SPJ11

Galaxies all formed at the same time, long ago. If we observe two galaxies at different distances from us, the more distant galaxy will actually be older.

When we observe objects in space, we are looking back in time due to the finite speed of light. Light from distant objects takes time to reach us, so the farther away an object is, the longer it takes for its light to reach us.

In the context of galaxies, if two galaxies formed at the same time in the past, the one that is farther away will appear older because we are seeing it as it was when the light left the galaxy in the past. The light from the more distant galaxy has travelled a greater distance and taken more time to reach us, so we see it as it existed further back in time.

Therefore, the more distant galaxy will appear older when observed from Earth.

Learn more about galaxies at: https://brainly.com/question/1241789

#SPJ11

The buoyant force acting on the block is approximately 80.91 Newtons (N).

To determine the buoyant force acting on the block, we need to consider Archimedes' principle, which states that the buoyant force experienced by an object immersed in a fluid is equal to the weight of the fluid displaced by the object.

The buoyant force (Fb) can be calculated using the formula:

Fb = ρ * V * g,

where ρ is the density of the fluid, V is the volume of the fluid displaced by the object, and g is the acceleration due to gravity.

In this case, the block is completely submerged in water, so the fluid is water with a density of approximately 1000 kg/m³.

To find the volume of the fluid displaced by the block, we can use the volume of the block itself, as the submerged portion of the block will displace an equivalent volume of water.

The volume (V) of the block is given by:

V = length * width * height.

Substituting the given dimensions, we have:

V = 0.105 m * 0.233 m * 0.329 m.

Calculating this, we find:

V ≈ 0.00824 m³.

Now, we can calculate the buoyant force:

Fb = 1000 kg/m³ * 0.00824 m³ * 9.8 m/s².

Evaluating this, we get:

Fb ≈ 80.91 N.

Therefore, the buoyant force acting on the block is about 80.91 Newtons (N).

To learn more about buoyant, refer below:

https://brainly.com/question/32138756

#SPJ11

A conducting device that produces a large current in order to generate a strong magnetic field is called an "Electromagnet."

An electromagnet is a type of magnet in which the magnetic field is produced by the flow of an electric current. It consists of a coil of wire, usually wrapped around a core made of soft ferromagnetic material like iron. When an electric current flows through the coil, it generates a magnetic field. The strength of the magnetic field depends on the amount of current flowing through the wire and the number of turns in the coil.By passing a current through a wire wrapped around a core made of a magnetic material, a strong magnetic field is created. Electromagnets are used in a variety of applications, including motors, generators, and MRI machines.

An electromagnet is the conducting device responsible for generating a strong magnetic field by producing a large current. This versatile device is widely used in various applications, such as lifting heavy objects, powering motors, and acting as a key component in electrical devices like transformers and relays.

To know more about electromagnets, click here

https://brainly.com/question/3427992

#SPJ11

We have no method of detecting dark matter, hence its existence in galaxies and clusters of galaxies is totally hypothetical. This statement is false.

While dark matter cannot be directly observed through electromagnetic radiation, there is a significant amount of evidence that suggests its presence. The gravitational effects of dark matter can be observed through its influence on the motion of visible matter in galaxies and clusters of galaxies.

For example, observations of the rotational speeds of stars and gas in galaxies indicate that there is more mass present than can be accounted for by visible matter alone. This suggests the presence of additional matter that does not emit or absorb light, i.e. dark matter.

Similarly, observations of the gravitational lensing of light by clusters of galaxies also indicate the presence of an additional mass that is not visible. The distribution of this mass can be mapped and compared to the distribution of visible matter, providing further evidence for the existence of dark matter.

To learn more about dark matter

https://brainly.com/question/29265929

#SPJ4

The distance between the star in the rest frame of the stars is approximately 0.34 light years.

According to the theory of special relativity, distances appear shorter when observed from a moving reference frame. Therefore, the distance between the two stars would appear shorter to someone on the moving spaceship than it would to someone who is stationary relative to the star.

To calculate the distance between the stars in the rest frame of the stars, we can use the Lorentz contraction formula:

L = L0 / γ

Where L is the contracted length, L0 is the length in the rest frame, and γ is the Lorentz factor, which is given by:

γ = [tex]1 / \sqrt{(1 - v^2/c^2)}[/tex]

In this case, v is the velocity of the spaceship (0.932c), and c is the speed of light.

Assuming that the distance between the stars in the rest frame is L0 = 1 light year (ly), we can calculate the contracted length as follows:

γ = [tex]1 / \sqrt{(1 - 0.932^2)}[/tex] = 2.95

L = L0 / γ = 1 ly / 2.95 = 0.34 ly

Therefore, the distance between the stars in the rest frame of the stars is approximately 0.34 light years.

Learn more about star here:

https://brainly.com/question/13587338

#SPJ11

When a football is kicked without rotating, it means that the kicker has kicked the ball in such a way that the center of mass remains stable and unchanged during its flight.

This happens when the kicker strikes the ball at its center or slightly below it. On the other hand, when a football tumbles end over end during its flight, it means that the kicker has struck the ball off-center, causing it to rotate around its center of mass. This rotation is caused by the imbalance of forces acting on the ball, which leads to a torque that causes it to spin. Therefore, the way a football is kicked determines whether it will sail through the air without rotating or tumble end over end.

To learn more about forces visit;

https://brainly.com/question/13191643

#SPJ11

The force on each charge when they are pushed to 1/4 meter separation is 16 N.

F = (k[tex]q_1q_2[/tex])/r²

the charges are separated by one meter and exert 1-N forces on each other, we can use Coulomb's law to find the charges:

1 N = (9x[tex]10^{9[/tex]Nm²/C²) * [tex]q_1[/tex] * [tex]q_2[/tex]/ (1 m)²

Simplifying, we get:

[tex]q_1[/tex]* [tex]q_2[/tex]= 1/9x[tex]10^{9[/tex] C²

If the charges are pushed to 1/4 meter separation, we can use Coulomb's law again to find the new force on each charge:

F = (k[tex]q_1q_2[/tex])/r²

F = (9x[tex]10^{9[/tex]Nm²/C²) * [tex]q_1[/tex] * [tex]q_2[/tex]/ (1/4 m)²²

F = 16 * (9x[tex]10^{9[/tex] Nm²/C²) * [tex]q_1[/tex]* [tex]q_2[/tex]

Substituting [tex]q_1[/tex]*[tex]q_2[/tex] = 1/9x[tex]10^{9[/tex] C², we get:

F = 16 N

A charge is a fundamental property of matter that describes the interaction between particles through electromagnetic force. All matter is made up of atoms, which contain positively charged protons, negatively charged electrons, and neutral neutrons. The charge of a particle is measured in Coulombs (C).

Like charges repel each other, while opposite charges attract. This is known as Coulomb's Law, which states that the force between two charged particles is proportional to the product of their charges and inversely proportional to the distance between them. The charge can be transferred from one object to another through various processes such as friction, conduction, and induction. When charge is transferred, it is conserved, meaning the total charge of a closed system remains constant.

To learn more about Charge visit here:

brainly.com/question/11944606

#SPJ4

When the side of the Earth that faces the moon experiences a high tide, the side of the Earth opposite the moon will also have a high tide.

This occurs because the gravitational pull of the moon causes the water on the side facing the moon to bulge outwards, creating a high tide. At the same time, the centrifugal force generated by the Earth's rotation also causes water to bulge outwards on the opposite side of the Earth, leading to another high tide. In contrast, low tides occur at areas that are approximately 90 degrees from the high tide locations.

So, if one side of the Earth facing the moon has a high tide, the opposite side will also experience a high tide.

To know more about high tide, click here

https://brainly.com/question/14683300

#SPJ11

The relationship among air pressure, temperature and density is expressed by the Ideal Gas Law,

This law also known as the General Gas Equation, and this law describes the behavior of gases in terms of their pressure, volume, temperature, and number of particles. According to the law, the pressure of a gas is directly proportional to its temperature and the number of particles present in it, and inversely proportional to its volume and density. In simpler terms, when the temperature of a gas increases, the pressure it exerts also increases, assuming that the number of particles and volume remain constant.

Similarly, if the volume of a gas decreases while the number of particles and temperature remain constant, its pressure will increase. Lastly, if the density of a gas increases while its volume and temperature remain constant, its pressure will also increase. Overall, the Ideal Gas Law helps scientists better understand how air pressure, temperature, and density are interrelated, making it an essential tool in atmospheric science and meteorology.

To learn more about Ideal Gas Law here:

https://brainly.com/question/30458409

#SPJ11

When a bug creates waves while swimming, the speed of the wave some distance away in front of the bug is slower compared to the speed of the wave created by a stationary bug. This is because the bug is swimming in the direction of the waves, adding its own speed to the speed of the waves, making them appear to be slower.

The bug is essentially catching up to its own waves, causing them to bunch up in front of it, resulting in a shorter wavelength and slower speed. This phenomenon is known as Doppler effect, where the apparent frequency and wavelength of waves change due to the motion of the source. Therefore, the speed of waves in front of the bug is slower, but the frequency remains the same, causing a change in wavelength.
Hi! When a bug that creates waves swims in the direction of the waves, the speed of the wave in front of the bug will be greater than the speed of the wave created by a stationary bug. This is because the moving bug adds its own speed to the waves it generates, causing them to travel faster in the direction the bug is moving. In contrast, waves created by a stationary bug only have the speed generated by the bug's movement in the water. To summarize, a swimming bug generates faster waves in front of it compared to a stationary bug.

For more information on  Doppler effect visit:

brainly.com/question/28106478

#SPJ11

A phase difference of π radians (or 180 degrees) corresponds to complete out-of-phase alignment of the waves, resulting in destructive interference.

The phase difference between the waves can be calculated using the formula:

phase difference = (path difference / wavelength) x 2π

The path difference is the distance traveled by the two waves, and wavelength is the common wavelength of the waves.

In this case, the path difference is:

path difference = 0.60 m - 0.45 m = 0.15 m

The phase difference is therefore:

phase difference = (0.15 m / 0.30 m) x 2π = π

Phase difference refers to the difference in the phase angle between two waves. A phase angle represents the position of a wave in its cycle at a particular point in time. When two waves are in phase, their phase angles are the same and their crests and troughs coincide at the same points in space. When two waves are out of phase, their phase angles differ and their crests and troughs do not coincide.

The phase difference is an important concept in fields such as physics, engineering, and telecommunications. In physics, it is used to describe the interference patterns that result when two waves meet. In engineering, it is used to design and analyze circuits, especially in electronics and power systems. In telecommunications, it is used to optimize the transmission and reception of signals.

To learn more about Phase difference visit here:

brainly.com/question/14594671

#SPJ4

The work done by the force on the potato as it moves along the x-axis from the origin to 4.5 m is 15.48 Nm

To calculate the work done by the force on the potato, we need to use the following formula:

Work = Force × Distance × cos(θ)

"Force" refers to the force acting on the potato, "Distance" represents the displacement of the potato along the x-axis, and "θ" is the angle between the force and the displacement.

In this case, the force acting on the potato is 3.44 N/m³, and the potato moves a distance of 4.5 m along the x-axis. Since the force is acting in the same direction as the displacement, the angle (θ) between them is 0 degrees. Therefore, cos(0) = 1.

Now, let's plug in the given values into the formula:

Work = (3.44 N/m³) × (4.5 m) × cos(0)
Work = (3.44 N/m³) × (4.5 m) × 1

By calculating, we find that the work done by the force on the potato is:

Work = 15.48 Nm

So, the work done by the force on the potato as it moves along the x-axis from the origin to 4.5 m is 15.48 Nm.

To know more about force visit

https://brainly.com/question/13191643

#SPJ11

To calculate apparent power in a three phase circuit, the phase values of voltage and current are multiplied by the square root of three and the power factor.

The square root of three is used because in a three phase circuit, the voltage and current waves are out of phase with each other by 120 degrees. This means that the total voltage and current are greater than the individual phase values, and multiplying by the square root of three takes this into account.

The power factor is a measure of how efficiently the circuit is using the power, and is typically a value between 0 and 1. Multiplying by the power factor adjusts for any inefficiencies in the circuit and gives the apparent power. In summary, the long answer is that to calculate apparent power in a three phase circuit, the phase values of voltage and current are multiplied by the square root of three and the power factor.

In calculating the apparent power (S) in a three-phase circuit, the phase values of voltage (V) and current (I) are multiplied by the square root of 3 (√3). The formula for apparent power in a three-phase circuit is: S = √3 * V * I

To know more about apparent power, refer

https://brainly.com/question/31116183

#SPJ11

The work done by the gravitational force on the box is zero.

The gravitational force on the box during this motion remains constant and does not change as the box moves horizontally over the level surface. This is because the gravitational force acts vertically downwards, perpendicular to the direction of the horizontal motion.  This is because the work done by a force is equal to the product of the force and the displacement in the direction of the force. Since the displacement of the box is in the horizontal direction and the gravitational force acts vertically downwards, the displacement and the force are perpendicular to each other, and hence the work done by the gravitational force is zero.

However, the work done by the person pushing the box against the frictional force is not zero. The frictional force acting on the box opposes the direction of motion, and the person has to exert a force equal in magnitude and opposite in direction to overcome this frictional force and maintain a constant speed. The work done by the person pushing the box is given by the product of the force applied and the displacement in the direction of the force. In this case, the force applied is the horizontal force exerted by the person, and the displacement is the distance the box is pushed horizontally.

Using the formula for work, W = Fd, where W is the work done, F is the force applied, and d is the displacement in the direction of the force, we can calculate the work done by the person pushing the box.

W = Fd = (20 kg) x (9.8 m/s^2) x (0.4) x (20m) = 1568 J

Therefore, the person pushing the box does 1568 J of work against the frictional force, while the gravitational force does zero work on the box during this motion.

Know more about work done here:

https://brainly.com/question/21854305

#SPJ11

Borglie wavelength  of :

(a) we get λ = h/p = 6.63 x 10^-34 J s / 4.01 x 10^-22 kg m/s = 1.66 x 10^-10 m.

(b)we get λ = h/p = 6.63 x 10^-34 J s / 155 kg m/s = 4.28 x 10^-36 m,

The de Broglie wavelength is a concept that relates the momentum of a particle to its wavelength, according to the equation λ = h/p, where λ is the wavelength, h is Planck's constant, and p is the momentum of the particle.

a) For a He atom traveling at 1000 m/s, we can calculate its momentum by multiplying its mass (4.0026 u) by its velocity (1000 m/s), which gives us a momentum of 4.01 x 10^-22 kg m/s. Plugging this value into the de Broglie wavelength equation,

b) For a person jogging at 8 km/h (2.22 m/s), we can estimate their mass to be around 70 kg. Multiplying their mass by their velocity gives us a momentum of 155 kg m/s.

Plugging this value into the de Broglie wavelength equation,  which is incredibly small compared to the size of a human.

In conclusion, the de Broglie wavelength is a useful concept for understanding the wave-particle duality of matter, and it can be calculated for both atomic particles and macroscopic objects like people.

To learn more about : Borglie wavelength

https://brainly.com/question/28093301

#SPJ11

The width of the slit is approximately 3.68 μm.

The width of the slit can be determined using the formula for the diffraction pattern produced by a single slit:

sin(θ) = m * λ / w

where:

θ is the angle of the diffraction pattern,

m is the order of the minimum,

λ is the wavelength of the light, and

w is the width of the slit.

In this case, we are given the following information:

Distance between the first and third minima (y) = 2.90 mm = 2.90 × 10^(-3) m

Distance from the screen to the slit (L) = 55.0 cm = 0.55 m

Wavelength of light (λ) = 690 nm = 690 × 10^(-9) m

To find the width of the slit (w), we need to find the angle θ corresponding to the third minimum.

Using the small angle approximation, we can approximate sin(θ) ≈ θ, since θ is small.

Rearranging the formula, we have:

θ ≈ m * λ / w

For the third minimum (m = 3), we have:

θ ≈ 3 * λ / w

The distance on the screen corresponding to the third minimum (y) is related to the angle θ and the distance to the screen (L) as follows:

y ≈ L * θ

Substituting the approximations for θ and solving for w:

y ≈ L * (3 * λ / w)

w ≈ 3 * λ * L / y

Substituting the given values:

w ≈ 3 * (690 × 10^(-9) m) * (0.55 m) / (2.90 × 10^(-3) m)

Calculating the result:

w ≈ 3.68 × 10^(-6) m

Therefore, the width of the slit is approximately 3.68 μm (micrometers).

To learn more about diffraction, refer below:

https://brainly.com/question/12290582

#SPJ11

A location's net ocean current motion is 90 degrees to the right of the location's predominant wind direction.

This is brought on by the Coriolis force, which causes moving objects in the Northern Hemisphere to be deflected to the right and in the Southern Hemisphere to the left. The Earth's rotation produces the Coriolis force, which deflects the direction of moving things like ocean currents. In the Northern Hemisphere, the deflection is to the right, while in the Southern Hemisphere, it is to the left. Because the wind propels the surface currents, which are subsequently deflected by the Coriolis force, the direction of net ocean current motion at a site is 90 degrees to the right of the direction of the prevailing wind. Large-scale ocean circulation patterns, including the Antarctic Circumpolar Current in the Southern Ocean and the Gulf Stream in the North Atlantic, are created as a result.

learn more about motion here:

https://brainly.com/question/22810476

#SPJ11