A certain brand of satellite dish antenna is a paraboloid with a diameter of 6 feet and a depth of 2 feet. How far from the vertex of the dish should the receiver of the antenna be placed

Cystic fibrosis is an autosomal recessive genetic disorder. This means that in order for a child to have cystic fibrosis, both parents must be carriers of the recessive gene.

When both parents are carriers, the probability for each child to inherit the disorder is as follows:

1. 25% chance of having cystic fibrosis (inheriting two copies of the recessive gene)
2. 50% chance of being a carrier (inheriting one copy of the recessive gene)
3. 25% chance of not being a carrier or having the disorder (inheriting no copies of the recessive gene)

Since the question states that the first two children do not have cystic fibrosis, this does not affect the probability of the third child having cystic fibrosis. The probability remains the same for each pregnancy.

Therefore, the probability of the third child having cystic fibrosis is still 25%. It's important to note that the probabilities are independent for each child, meaning the outcome of one child's genetic inheritance does not influence the outcome for another child.

To learn more about probability click here

brainly.com/question/30034780

#SPJ11

The percentage of adult spiders that have carapace lengths exceeding a certain value is equal to the area under the standard normal curve that lies to the right of that value.

This is because the normal distribution is symmetric around its mean, and the area to the right of a certain value represents the proportion of data points that are greater than that value. Therefore, by calculating the area under the standard normal curve to the right of a certain value, we can determine the percentage of adult spiders with carapace lengths exceeding that value.

Know more about standard normal curve here:

https://brainly.com/question/31391220

#SPJ11

√2 is the value of the side b.

In the given triangle from the sine rule,

sin60/a = sin90/2√2 = sin 30/b

Thus,

1/2√2 =1/2/b

b = √2

Therefore, the value of b is √2.

Learn more about triangles here:

https://brainly.com/question/2773823

#SPJ1

A chi-square test of independence is indeed a one-tailed test. The reason for this is that we are testing whether the observed frequencies of two categorical variables are significantly different from the expected frequencies.

We square the deviations between the observed and expected frequencies, and since deviations can only be positive, the test statistic always lies at or above zero. Hypothesis tests are one-tailed when dealing with sample data because we have a specific direction for our research question. In the case of a chi-square test of independence, we are interested in whether one variable is dependent on the other variable, so we have a directional hypothesis. Furthermore, the chi-square distribution is positively skewed, meaning that the majority of the distribution is on the right-hand side. This is important to consider when interpreting the results of a chi-square test.

Know more about chi-square test here:

https://brainly.com/question/14082240

#SPJ11

Answer:

Step-by-step explanation:

n to the power of 6

To test for a statistically significant difference between the population means for first- and fourth-round scores, we can use a two-sample t-test with a significance level of .10.

Assuming that the sample data meets the necessary assumptions for a t-test (e.g. normality, equal variances), we can calculate the t-statistic using the following formula:

t = (x1 - x4) / (s√(1/n1 + 1/n4))

where x1 and x4 are the sample means for first- and fourth-round scores, s is the pooled standard deviation, n1 and n4 are the sample sizes for the two groups.

Once we have calculated the t-statistic, we can determine the corresponding p-value using a t-distribution table or calculator. The p-value represents the probability of obtaining a t-statistic as extreme or more extreme than the one observed, assuming the null hypothesis (i.e. no difference between the population means) is true.

If the p-value is less than .10, we can reject the null hypothesis and conclude that there is a statistically significant difference between the population means. On the other hand, if the p-value is greater than .10, we fail to reject the null hypothesis and conclude that there is not enough evidence to suggest a difference between the population means.

Therefore, to answer the question, we need to know the sample means, standard deviations, and sample sizes for the first- and fourth-round scores, and use them to calculate the t-statistic and p-value. Without this information, we cannot determine the exact value of the p-value.

To learn more about standard deviation click here

brainly.com/question/23907081

#SPJ11

In coordinate form, the system of equations has a solution of x = 4, y = 14, or (4, 14).

To solve the system of equations:

-3x + 2y = 16

5x - 4y = -36

We can use the method of elimination, which involves adding or subtracting the equations in order to eliminate one of the variables.

First, we can multiply the first equation by 5 and the second equation by 3, in order to make the coefficients of x opposite in sign:

-15x + 10y = 80

15x - 12y = -108

Now we can add the two equations to eliminate x:

-15x + 15x + 10y - 12y = 80 - 108

-2y = -28

y = 14

Substituting y = 14 into the first equation, we get:

-3x + 2(14) = 16

-3x + 28 = 16

-3x = -12

x = 4

Therefore, the solution to the system of equations is x = 4, y = 14, or (4, 14) in coordinate form.

Learn more about the System of equations here:

https://brainly.com/question/12628931

#SPJ1

When determining the cell density of a sample by the standard plate count method, the final density of cells is reported as colony forming units "(CFUs) per milliliter of sample."

This method involves diluting the sample and spreading it onto a solid agar medium, allowing the bacteria to grow and form visible colonies.

Know more about the standard plate count method

https://brainly.com/question/29489516

#SPJ11

The margin of error of a 95% confidence interval estimate of the population proportion of managers who have caught salespeople cheating on an expense report falls within the range of 0.222 to 0.378.

In other words, it represents the range within which the true population proportion is likely to fall.

To calculate the margin of error, we need to know the sample size, the proportion of managers in the sample who have caught salespeople cheating on an expense report, and the confidence level.

Assuming that we have a large enough sample size (at least 30) and that the sample proportion is not too close to 0 or 1.

we can use the following formula to calculate the margin of error:

Margin of error = z* (sqrt(p*(1-p)/n))

where z* is the z-score associated with the desired confidence level (in this case, 1.96 for 95% confidence).

p is the sample proportion, and n is the sample size.

For example, if we have a sample of 100 managers and 30% of them have caught salespeople cheating on an expense report.

The margin of error for a 95% confidence interval estimate would be:

Margin of error = 1.96* (sqrt(0.3*(1-0.3)/100)) = 0.078

This means that we can be 95% confident that the true population proportion of managers who have caught salespeople cheating on an expense report falls within the range of 0.222 to 0.378 (i.e., the sample proportion plus or minus the margin of error).

know more about margin of error here:

https://brainly.com/question/29328438

#SPJ11

The margin of error for a 95% confidence interval for the population mean (μ) is given by: Margin of Error = z*(σ/√n)

where z is the critical value from the standard normal distribution for a 95% confidence level (z = 1.96), σ is the population standard deviation (which is usually unknown and estimated by the sample standard deviation, s), and n is the sample size.

Assuming the conditions of the linear model hold, the margin of error for a 95% confidence interval for the population mean can be calculated using the above formula.

Note that the linear model assumptions include that the errors are normally distributed, the mean of the errors is zero, and the variance of the errors is constant.

To learn more about margin of error, here

https://brainly.com/question/10218601

#SPJ4

The proof for each theorem is matched as;

<EFC is a right angle: Definition of a right angle

m<EFC = 90; Definition of a tangent line

m<EFC + m<FEC + m<ECF = 180 degrees; triangle sum theorem

90 + m<FEC + m<ECF = 180; substitution property of equality

m<FEC + m<ECF = 90; substitution property of equality

m<FEC + m<ECF = definition of complementary angles

To determine the values, we need to know the following;

Learn more about angles at: https://brainly.com/question/25716982

#SPJ1

The probability that the cycle time exceeds 75 minutes, given that it already exceeds 45 minutes, is 25%.

Given the information provided, we know the following:

1. The cycle time for trucks hauling concrete is uniformly distributed over the interval 40 to 85 minutes.
2. We need to find the probability that the cycle time exceeds 75 minutes, given that it already exceeds 45 minutes.

Step 1: Determine the length of the original interval.
The original interval is from 40 to 85 minutes, so the length is 85 - 40 = 45 minutes.

Step 2: Determine the length of the conditional interval.
Since we know that the cycle time already exceeds 45 minutes, our new interval starts at 45 minutes and ends at 85 minutes. The length of this interval is 85 - 45 = 40 minutes.

Step 3: Determine the length of the interval for cycle times exceeding 75 minutes.
The interval for cycle times exceeding 75 minutes starts at 75 and ends at 85, so the length of this interval is 85 - 75 = 10 minutes.

Step 4: Calculate the probability.
Since the cycle time is uniformly distributed, the probability is equal to the ratio of the lengths of the intervals:
Probability = (Length of interval for cycle times exceeding 75 minutes) / (Length of conditional interval)
Probability = 10 minutes / 40 minutes = 0.25 or 25%

So, the probability that the cycle time exceeds 75 minutes, given that it already exceeds 45 minutes, is 25%.

Visit here to learn more about probability  : https://brainly.com/question/30034780
#SPJ11

The appropriate null hypothesis would be that the market share percentage is equal to or less than 20 percent. This would be denoted as H0: p ≤ 0.20.

To know the appropriate null hypothesis for a company testing if the market share of a new product during its first year is more than 20 percent, the null hypothesis (H0) would be that the market share percentage is less than or equal to 20 percent. In other words:
H0: Market Share Percentage ≤ 20%

This null hypothesis is set up to test against the alternative hypothesis (H1) that the market share percentage is more than 20 percent:
H1: Market Share Percentage > 20%

The company would then collect data and perform a hypothesis test to determine if there is sufficient evidence to reject the null hypothesis in favor of the alternative hypothesis.

Know more about percentage here:

https://brainly.com/question/24877689

#SPJ11

Answer:

314 sqft

Step-by-step explanation:

area = π r² =100π =314 sqft

(a) The mean number of leaking tanks is 3.75. (b) The probability that 10 or more of the 15 tanks leak is 0.114 or 11.4%. (c) The probability that at least 540 of these tanks are leaking is 3.22%

(a) The mean number of leaking tanks in such samples of 15 can be calculated using the formula for the mean of a binomial distribution, which is mean = np, where n is the sample size and p is the probability of success. In this case, n = 15 and p = 0.25 (since 25% of tanks leak), so the mean number of leaking tanks is 15 x 0.25 = 3.75.

(b) To calculate the probability that 10 or more of the 15 tanks leak, we can use the binomial distribution again. The formula for this probability is P(X ≥ 10) = 1 - P(X ≤ 9), where X is the number of leaking tanks. Using a binomial calculator or a probability distribution table, we can find that P(X ≤ 9) = 0.886 and therefore P(X ≥ 10) = 1 - 0.886 = 0.114 or 11.4%.

(c) To calculate the probability that at least 540 of the 2000 tanks are leaking, we can use the normal approximation to the binomial distribution, since the sample size is large and the probability of success is not too small or too large (0.25 in this case). We first calculate the mean and standard deviation of the number of leaking tanks: mean = np = 2000 x 0.25 = 500 and standard deviation = sqrt(np(1-p)) = sqrt(2000 x 0.25 x 0.75) = 21.65 (rounded to two decimal places). Then, we standardize the value 540 using the formula z = (x - mean) / standard deviation, where x is the number of leaking tanks we want to find the probability for. Thus, z = (540 - 500) / 21.65 = 1.85 (rounded to two decimal places). Using a normal distribution table or calculator, we can find that the probability of getting a z-score of 1.85 or higher is 0.0322 or 3.22%. Therefore, the probability that at least 540 of the 2000 tanks are leaking is 3.22%.

To learn more about probability click here

brainly.com/question/30034780

#SPJ11

The probability of a Type I error is 0.2 or 20%. This means that there is a 20% chance of rejecting the null hypothesis when it is actually true.

The power of a hypothesis test is the probability of rejecting the null hypothesis when the alternative hypothesis is true. In this case, the power of the test is given as 0.8, and the null hypothesis is that the true value of the parameter is 10, while the alternative hypothesis is that the true value is 8.

We are given the sample size, n = 25, and the standard deviation, σ = 4. To calculate the probability of a Type I error, we need to determine the significance level of the test, denoted by α.

The significance level is the probability of rejecting the null hypothesis when it is actually true. It is usually set before conducting the test, and commonly set at 0.05 or 0.01.

To calculate α, we can use the following formula:

α = 1 - power = 1 - 0.8 = 0.2

So, the probability of a Type I error is 0.2 or 20%. This means that there is a 20% chance of rejecting the null hypothesis when it is actually true.

for such more question on  probability

https://brainly.com/question/13604758

#SPJ11

An experimental design that administers one or more levels of one independent variable in combination with two or more levels of another independent variable is called a factorial design. In a factorial design, researchers can examine the effects of multiple independent variables on the dependent variable, as well as any interaction effects between the independent variables.

For example, a researcher may investigate the effects of two different types of therapy (independent variable 1) and the severity of a patient's depression (independent variable 2) on the patient's level of improvement (dependent variable). By varying the levels of both independent variables, the researcher can better understand how the two factors interact and influence the outcome.

In a factorial design, researchers manipulate one or more independent variables, each with multiple levels, to study the combined effects on a dependent variable. By examining the interaction between the independent variables, factorial designs provide valuable insights into complex relationships and help identify possible confounding factors. In summary, a factorial design combines various levels of independent variables to analyze their combined influence on the dependent variable in a systematic and efficient manner.

Learn more about administers here : brainly.com/question/30450080

#SPJ11

The expected value of X is 100/663.

Let's consider the sequence of 3 number cards as an individual block, then we can see that there are 10 such blocks in the deck (2-3-4, 3-4-5, ..., 9-10-J, 10-J-Q), and there are 39 non-number cards in the deck.

Now, we can consider flipping the cards one by one and keep track of the number of times we see the beginning of a new block of 3 number cards. There are 50 positions in the deck where a block of 3 number cards could begin (the first 2 cards cannot start a block and the last 2 cards cannot end a block). For each position, the probability of seeing the beginning of a new block is given by:

P(new block) = P(first card is a number) x P(second card is the next number) x P(third card is the next number) = 10/52 x 4/51 x 4/50 = 2/663

Therefore, the expected value of X is:

E(X) = P(new block at position 1) + P(new block at position 2) + ... + P(new block at position 50) = 50 x P(new block) = 50 x 2/663 = 100/663

So, the expected value of X is 100/663.

Learn more about expected value

https://brainly.com/question/29574962

#SPJ4

The intercept is an essential component of the regression model, as it helps to establish a baseline prediction for the number of shaped ski rentals before accounting for the effects of the independent variables.

Based on the previous multivariate regression model that used weekend, school break, and weather as predictors of shaped ski rentals, the value of the intercept refers to the estimated number of shaped ski rentals when all independent variables are equal to zero.

In this case, the intercept would represent the expected number of shaped ski rentals on a weekday during a non-school break period when the weather is average. Unfortunately, without the exact equation for the regression model, it's impossible to determine the specific value of the intercept.

However, it is important to note that the intercept is an essential component of the regression model, as it helps to establish a baseline prediction for the number of shaped ski rentals before accounting for the effects of the independent variables.

to learn more about independent variables click here:

brainly.com/question/1479694

#SPJ11

The car salesman must visit approximately 14 customers to meet his daily sales goal of 4 cars, based on the given probability of 0.3.

To calculate the expected number of customers a car salesman must visit to achieve his daily sales goal, we can use the concept of probability. Given that the probability of a customer purchasing a car is 0.3, and the salesman needs to make 4 sales each day, we can use the formula:

Expected number of customers = (Number of sales needed) / (Probability of a successful sale)

In this case, the number of sales needed is 4, and the probability of a successful sale is 0.3. Plugging these values into the formula, we get:

Expected number of customers = 4 / 0.3 = 13.33

Therefore, the car salesman must visit approximately 14 customers (since we cannot have a fraction of a customer) to meet his daily sales goal of 4 cars, based on the given probability of 0.3. Keep in mind that this is an average value, and the actual number of customers required may vary from day to day.

To learn more about probability click here

brainly.com/question/30034780

#SPJ11

By the time they are juniors, 52% of the biology majors have taken statistics, 23% have taken computer programming, and 7% have taken both. 68% of junior biology majors are eligible to take BioResearch

To be eligible to take BioResearch, a student must have taken either a statistics course or a computer programming course. From the given information, we know that 52% of junior biology majors have taken statistics and 23% have taken computer programming. However, we need to account for the fact that some students may have taken both courses.
To do this, we can use the formula:
Total = A + B - Both
where A represents the percentage of students who have taken statistics, B represents the percentage of students who have taken computer programming, and Both represents the percentage of students who have taken both courses.
Plugging in the values we have:
Total = 52 + 23 - 7
Total = 68
Therefore, 68% of junior biology majors are eligible to take BioResearch.

Learn more about BioResearch here

https://brainly.com/question/31683157

#SPJ11

As the number of flips increases from 10 to 10000, we can expect the relative frequency of the occurrence of a Head to become more stable and closer to the true probability of 0.2.

The true probability of observing a Head based on this simulation is 0.2, which means that out of 10 flips, we would expect to see 2 Heads on average. However, as the number of flips increases from 10 to 10000, we would expect the relative frequency of the occurrence of a Head to approach the true probability of 0.2.

This is because of the Law of Large Numbers, which states that as the sample size increases, the sample mean will approach the true mean. In the case of coin flipping, the more flips we make, the closer we will get to the expected proportion of Heads.

For example, if we flip the coin 100 times, we might get 30 Heads and 70 Tails, which is a relative frequency of 0.3. However, if we flip the coin 1000 times, we might get 200 Heads and 800 Tails, which is a relative frequency of 0.2. As we continue to increase the number of flips, the relative frequency will approach the true probability of 0.2.

Therefore, as the number of flips increases from 10 to 10000, we can expect the relative frequency of the occurrence of a Head to become more stable and closer to the true probability of 0.2. This is important to keep in mind when conducting any type of statistical analysis based on coin flipping or other random events.

To learn more about relative frequency, refer here:

https://brainly.com/question/29739263#

#SPJ11

The  value of the line integral / (+ +4vY) ds, where C is the path going counterclockwise around the square with vertices (0,0), (2,0), (2,2) and (0,2), is 32v.

To evaluate the line integral, we need to parameterize the square and then compute the line integral along each of the four sides.

Let's parameterize the square as follows:
- For the bottom side from (0,0) to (2,0), we can use the parameterization r(t) = <t, 0>, where 0 ≤ t ≤ 2.
- For the right side from (2,0) to (2,2), we can use the parameterization r(t) = <2, t>, where 0 ≤ t ≤ 2.
- For the top side from (2,2) to (0,2), we can use the parameterization r(t) = <t, 2>, where 0 ≤ t ≤ 2.
- For the left side from (0,2) to (0,0), we can use the parameterization r(t) = <0, t>, where 0 ≤ t ≤ 2.

Now we can compute the line integral along each of these sides and add them up to get the total line integral.

Line integral along the bottom side:
- r(t) = <t, 0>, where 0 ≤ t ≤ 2.
- dr/dt = <1, 0>.
- ds/dt = ||dr/dt|| = 1.
- (+4vY) ds = 4v(0) ds = 0.
- Integral from t=0 to t=2: 0 dt = 0.

Line integral along the right side:
- r(t) = <2, t>, where 0 ≤ t ≤ 2.
- dr/dt = <0, 1>.
- ds/dt = ||dr/dt|| = 1.
- (+4vY) ds = 4v(t) ds = 4v(t) dt.
- Integral from t=0 to t=2: 4v(t) dt = 8v.

Line integral along the top side:
- r(t) = <t, 2>, where 0 ≤ t ≤ 2.
- dr/dt = <1, 0>.
- ds/dt = ||dr/dt|| = 1.
- (+4vY) ds = 4v(2) ds = 8v ds = 8v.
- Integral from t=0 to t=2: 8v dt = 16v.

Line integral along the left side:
- r(t) = <0, t>, where 0 ≤ t ≤ 2.
- dr/dt = <0, 1>.
- ds/dt = ||dr/dt|| = 1.
- (+4vY) ds = 4v(t) ds = 4v(t) dt.
- Integral from t=0 to t=2: 4v(t) dt = 8v.

Adding up the line integrals along each side, we get:
- Total line integral = 0 + 8v + 16v + 8v = 32v.

Therefore, the value of the line integral / (+ +4vY) ds, where C is the path going counterclockwise around the square with vertices (0,0), (2,0), (2,2) and (0,2), is 32v.

Visit to know more about Integral:-

brainly.com/question/30094386

#SPJ11

The life expectancy will reach 75 years old in the year 1970.

We have,

Let's start by defining the variables:

L = life expectancy in years

t = time in years since 1900

We know that from 1900 to 1960, life expectancy increased at a constant rate of 0.401 years per year.

So, we can write the following equation to represent the relationship between L and t:

L = 0.401t + b

where b is the life expectancy in 1900.

To find b, we can use the fact that the life expectancy in 1900 was around 47 years old.

b = 47

So, the equation becomes:

L = 0.401t + 47

We also know that in 1942, the life expectancy was 62.9 years old.

So, we can use this information to find the value of t in 1942:

62.9 = 0.401t + 47

Solving for t, we get:

t = (62.9 - 47) / 0.401 = 39.15

In 1942,

t = 39.15.

To find the year when the life expectancy reaches 75 years old, we can plug in L = 75 into the equation and solve for t:

75 = 0.401t + 47

Solving for t.

t = (75 - 47) / 0.401 = 69.82

So, the life expectancy will reach 75 years old in the year:

1900 + 69.82 = 1969.82

Therefore,

The life expectancy will reach 75 years old in the year 1970.

Learn more about life expectancy here:

https://brainly.com/question/30036353

#SPJ1

When an inequality is multiplied or divided by a negative number, the inequality sign will flip, meaning it will change its direction. For example, if you have a > b and you multiply or divide both sides by a negative number, the inequality will become a < b. This is because the relationship between the values reverses when multiplied or divided by a negative number.

Explanation:

When an inequality is multiplied or divided by a negative number, the direction of the inequality sign is flipped. This is because multiplication or division by a negative number, results in a reversal of the order of the numbers on the number line.

To see why this happens, consider the following example:

Suppose we have the inequality x < 5. If we multiply both sides of this inequality by -1, we get -x > -5. Notice that we have flipped the inequality sign from "<" to ">". This is because multiplying by -1 changes the sign of x to its opposite, and also changes the sign of 5 to its opposite, resulting in a reversal of the order of the numbers on the number line.

Similarly, if we divide both sides of the inequality x > 3 by -2, we get (-1/2)x < (-3/2). Here, we have again flipped the inequality sign from ">" to "<". This is because dividing by a negative number also changes the order of the numbers on the number line.

In general, if we have an inequality of the form a < b or a > b, where a and b are real numbers, and we multiply or divide both sides by a negative number, we obtain:

If we multiply by a negative number, the inequality sign is flipped. For example, if a < b and c < 0, then ac > bc.

If we divide by a negative number, the inequality sign is also flipped. For example, if a > b and c < 0, then a/c < b/c.

Therefore, it is important to be mindful of the signs of the numbers involved when performing operations on inequalities. If we multiply or divide by a negative number, we must flip the direction of the inequality sign accordingly.

Know more about the inequality click here:

https://brainly.com/question/30231017

#SPJ11

To minimize the use of framing, the rectangular frame should have dimensions of around 9.3 inches by 2.9 inches.

Let's assume the length and width of the rectangular frame be L and W, respectively. The total area of the frame can be expressed as:

Total Area = (L + 3W) * (W + 3L) [adding 1.5 inch of framing to each side]

The opening of the frame is given as 27 square inches:

L * W = 27

We can substitute the value of L from the second equation into the first equation and simplify:

Expanding the brackets and simplifying:

Total Area = 3W² + 27*3 + 81/W + 27/W²

We can now take the derivative of this expression with respect to W and set it to zero to find the value of W that minimizes the total area:

Substituting the value of W back into the equation L * W = 27:

Therefore, the dimensions of the frame should be approximately 9.3 inches by 2.9 inches to minimize the amount of framing used.

Learn more about derivative

brainly.com/question/30365299

#SPJ11

Since 72 beats per minute is within his THRZ, he is exercising at an appropriate intensity level.

What is THRZ?

THRZ stands for Target Heart Rate Zone. This is the range of heart beats per minute that is often used to determine exercise intensity during exercise. THRZ is usually calculated based on a person's age, resting heart rate, and maximum heart rate, and can vary based on a person's exercise goals and health status. Staying within the THRZ during exercise is thought to provide the most effective cardiovascular training and help maximize the benefits of exercise.

To calculate the lower end of his THRZ, we can multiply his MHR by 0.6:

190 x 0.6 114 bpm

To calculate the upper end of his THRZ, we can multiply his MHR by 0.8:

190 x 0.8152 bpm.

Therefore, Robert's THRZ ranges from 114 bpm to 152 bpm.

Since he counted 12 beats in 10 seconds, we can calculate his heart rate in beats per minute as follows:

12 beats / 10 seconds = x beats / 60 seconds x = 72 beats per minute

Since 72 beats per minute is within his THRZ, he trains at an appropriate intensity.

Learn more about THRZ, by the following link,

https://brainly.com/question/871799

#SPJ4

When a research hypothesis does not predict the direction of a relationship, the test is typically two-tailed.

A two-tailed hypothesis is used when there is no specific prediction about

the direction of the relationship between variables.

It simply states that there is a relationship between the variables being

studied, but does not specify whether the relationship will be positive or

negative.

In contrast, a one-tailed hypothesis predicts the direction of the

relationship (i.e. positive or negative) and is used when there is a clear

expectation about the direction of the effect. A direct positive hypothesis

predicts a positive relationship between variables.

for such more question on typically two-tailed.

https://brainly.com/question/25829061

#SPJ11

The sum S of the series is approximately 0.86832, and the error is less than or equal to 0.01295.

Using the sum of the first 10 terms, we can approximate the sum S of the series as follows:

S ≈ sum of first 10 terms
  ≈ 0.86832

To estimate the error, we can use the remainder formula for an infinite series:

Rn = Sn - S
  = sum from n+1 to infinity of 1/sqrt(n^8 + 3)

Since we are trying to estimate the error using the sum of the first 10 terms, we can use n = 10 in the remainder formula:

R10 = sum from 11 to infinity of 1/sqrt(n^8 + 3)

To find an upper bound for R10, we can use the integral test:

1/sqrt(x^8 + 3) is a decreasing function for x ≥ 1, so we can use the integral from 10 to infinity to find an upper bound for R10:

integral from 10 to infinity of 1/sqrt(x^8 + 3) dx
≈ 0.01295

Therefore, we can estimate the error as:

error ≤ R10
     ≤ 0.01295

Know more about series here:

https://brainly.com/question/15415793

#SPJ11

The correct answer is d. 56.

When computing a correlation coefficient, the degrees of freedom (df) is calculated as (n-2), where n is the sample size. In this case, we are given that df = 55.

Substituting df = 55 into the formula, we get:

55 = n - 2

Adding 2 to both sides, we get:

n = 57

Therefore, the sample size must be 57 in order to have 55 degrees of freedom when computing a correlation coefficient.
Hi! When computing a correlation coefficient with 55 degrees of freedom, your sample size must be 57 (Option c).

Here's the step-by-step explanation:
1. Recall that the formula to find degrees of freedom (df) in correlation is df = n - 2, where n is the sample size.
2. In this case, the degrees of freedom is given as 55.
3. To find the sample size (n), you'll need to rearrange the formula: n = df + 2.
4. Substitute the given degrees of freedom into the formula: n = 55 + 2.
5. Solve for n: n = 57.

Therefore, when computing a correlation coefficient with 55 degrees of freedom, your sample size must be 57.

To know more about coefficient visit:

https://brainly.com/question/1038771

#SPJ11