Hence option C is the correct option.
Therefore, the formula of the hydrate is MgCO3•0.449H2O.
The formula of the hydrate can be determined by calculating the number of moles of water driven off during the heating process and then using this information to determine the formula of the hydrate.
First, calculate the number of moles of water driven off:
15.67 g - 7.58 g = 8.09 g
Next, convert the mass of water driven off to moles:
8.09 g / (18.015 g/mol) = 0.449 mol
Finally, use the number of moles of water driven off to determine the formula of the hydrate:
(0.449 mol H2O) / (1 mol MgCO3•xH2O) = x
x = 0.449
So, the formula of the hydrate is MgCO3•0.449H2O.
For such more question on hydrate
https://brainly.com/question/16275027
#SPJ4
__________ is formed when hydrogen is oxidised during combustion. What one word completes the sentence?
When hydrogen atoms are present in a fuel, they are oxidised to water.
The combustion reactions are commonly exothermic redox reactions between an oxidant and a fuel. When hydrogen is oxidized during combustion it forms water.
What is combustion?A chemical reaction in which a fuel undergoes oxidation by reacting with an oxidizing agent which results in the release of energy generally in the form of heat is called the combustion. The product formed as a result of the combustion is usually an oxidized fuel.
It is not unfamiliar that the combustion reactions are accompanied by the flames. It is very important to note that not all combustion reactions result in fires. The complete combustion reactions can sometimes referred to as clean combustion reactions.
The combustion reaction of hydrogen is given as:
2H₂ + O₂ → 2H₂O
When hydrogen is oxidized, it results in the formation of water. When hydrogen atoms are present in a fuel, they are oxidized to water.
Thus water is formed when hydrogen is oxidized.
To know more about combustion, visit;
https://brainly.com/question/14335621
#SPJ2
what is the ph of a solution that has [h3o ] = 1.39 x 10-2 m?
The pH of the solution that the concentration of [H₃O⁺] 1.39 × 10⁻² M is the 1.85 .
The concentration of [H₃O⁺] = 1.39 × 10⁻² M
The pH expression is as follows :
pH = - log [H₃O⁺]
where, the concentration of [H₃O⁺] = 1.39 × 10⁻² M
By solving the values , we get :
pH = - log [H₃O⁺]
pH = - log ( 1.39 × 10⁻² )
pH = - log ( 1.39 ) + - log 10⁻²
pH = - 0.143 + 2
pH = 1.85
Thus, the pH of the solution is 1.85 with the concentration of [H₃O⁺] is 1.39 × 10⁻² M.
To learn more about pH here
https://brainly.com/question/28680511
#SPJ4
why is a crystal of pure calcium carbonate made in a lab not a sample of the mineral's calcite?
Explanation:
It didn't form naturally and the carbonate calcium was found in caves.When 1-chlorobutane is treated with sodium hydroxide, two products are formed_ Identify the two products: (Select all that apply:) A. 1-butyne B. 1-butanal C. 1-butene D. 2-butanol E. 2-butene F. 1-butanol
When the 1-chlorobutane is treated with sodium hydroxide, two products are formed are the correct option is C. 1 - butene F. 1 - butanol.
When 1-chlorobutane is treated with sodium hydroxide, The reaction is as follows :
1) The substitution reaction take place :
Cl - CH₂ - CH₂ - CH₂ - CH₃ + NaOH ----> OH - CH₂ - CH₂ - CH₂ - CH₃
1-chlorobutane sodium hydroxide 1 - butanol
2) The elimination reaction take place :
Cl - CH₂ - CH₂ - CH₂ - CH₃ + NaOH ----> CH = CH - CH₂ - CH₃
1-chlorobutane sodium hydroxide 1-butene
To learn more about 1-chlorobutane here
https://brainly.com/question/29751428
#SPJ4
What is Barium Hydroxide?
Barium hydroxide is a chemical compound with the chemical formula Ba(OH)2
What are compounds ?
A compound is a substance consisting of two or more elements chemically combined in a fixed ratio. They differ from mixtures consisting of two or more substances physically mixed without chemical bonding. Compounds have their own physical and chemical properties that differ from those of individual elements. For example, the compound water (H2O) has different properties (boiling point, density, solubility, etc.) than its components hydrogen (H2) and oxygen (O2).
Compounds are formed by chemical reactions in which atoms of different elements combine to form new substances. The formation of a compound can be represented by a chemical formula that indicates the type and number of atoms in the compound.
To know more about compounds , click the link below ;
brainly.com/question/26487468
#SPJ4
hydroxide is not a suitable base for deprotonating an alkyne, why? use pka values to support your answer.
Hydroxide is not a suitable base for deprotonating an alkyne because it is a weak base.
Due to the acetylide ion's lower stability (stronger base) compared to the hydroxide ion. In other words, acetylene cannot be deprotonated using hydroxide.
Deprotonation is the process of eliminating the compound's most acidic proton using a base that you must select. We refer to it as a base because, according to the Bronsted-Lowry definition, the proton donor in an acid-base reaction is the given chemical if it is deprotonated, which makes it a base.
The terminal alkynes can be deprotonated by suitable strong bases, such as NaH or NaNH2, due to the relative high acidity.
To learn about base
https://brainly.com/question/29833185
#SPJ4
find the weight of BACL2 in 250cm³solution if given that after addition of 40.0cm³ of 0.102M AGNO3 solution to 30cm³ of the BACL2 solution, back titration of the excess AGNO3 required 20cm³ of 0.098M NH4CNS solution
Answer:
sample containing only BaCl2
and NaCl
is dissolved in 50 mL
of distilled water. Titrating with 0.07916 M
AgNO3
requires 19.46 mL
to reach the end point. What is the weight percent of BaCl2
in the sample? (Molar mass of BaCl2=208.232 gmol−1
and Molar mass of NaCl=58.4425 gmol−1
)
The way I did it was ;
0.1036g of sample contained 266.6745 Molar mass of BaCl2
and NaCl
i.e. 0.1036g of sample= 266.6745 of substance
x g = 208.232 of BaCl2
only
x g=(0.1036*208.232)/266.6745
=0.08089 g
Where 0.08089 g is the mass of BaCl2
present in the sample.
Weight % = (0.08089/0.1036)*100%
= 78%
I don't know if I'm correct.
what is the correct solution to the assignment please?
A buffer solution at pH 10 has a ratio of [HA]/[A−] of 10. What is the pKa of the acid?a. 8b. 9c. 10d. 11e. 12
A buffer solution at pH 10 has the ratio of [HA] / [A⁻] of 10.The pKa of the acid is 11.
The pH is as follows :
pH = pka + log [A⁻] / [ HA]
Where
The pH = 10
[A⁻] / [ HA] = 1 / 10
By solving the values , we get :
pH = pka + log [A⁻] / [ HA]
10 = pka + log(1/ 10)
10 = pka + log (0.1 )
10 = pka + (-1 )
10 = pka - 1
pka = 11
The pka value is 11 for the pH of value 10.
To learn more about pH here
https://brainly.com/question/3934133
#SPJ4
What process converts glucose to lactic acid?
Fermentation is the process by which glucose converts to lactic acid. It occurs under anaerobic condition. Lactate dehydrogenase is the enzyme responsible for it.
Cellular respiration known as anaerobic respiration takes place when oxygen is not present. Lactic acid fermentation and alcoholic fermentation are the two kinds of anaerobic respiration. Some bacteria convert pyruvic acid into lactic acid. Animal muscle cells exhibit this metabolic mechanism as well. During physical activity, muscle cells' oxygen supply for respiration may not be sufficient. Pyruvic acid is converted to lactic acid under anaerobic circumstances. When lactate dehydrogenase is present, this takes place. Additionally, an antioxidant like NADH+H+ is reoxidized to NAD+.
A significant portion of the energy is not released throughout the fermentation process. Less than 7% of the glucose's energy is released in this situation. Additionally, not all of it is included in ATP's high energy bonds.
Fermentation process:
In the breakdown of the glucose or 6-carbon molecule, glyceraldehyde 3-phosphate and 3-phosphoglyceric acid are produced.
NAD+ undergoes this transformation into NADH+H+.
When combined with 3-phosphoglyceric acid, phosphoenol pyruvic acid eventually yields pyruvic acid.
In this procedure, net 2 ATP molecules are produced (glycolysis).
NADH+H+, a reducing agent that reduces pyruvic acid to lactic acid and then reoxidizes to NAD+, aids in this process.
Two pyruvate/pyruvic acid molecules are converted into two lactate/lactic acid molecules through this procedure. The enzyme lactate dehydrogenase is present throughout this process.
For more such questions on Fermentation , Refer:
https://brainly.com/question/490148
#SPJ4
calculate the vapor pressure (in torr) at 293 k in a solution prepared by dissolving 16.20 g of the non-volatile non-electrolyte urea {co(nh2)2} in 156 g of water. the vapor pressure of water at 293 k is 17.54 torr.
The vapor pressure (in torr) at 293 k in a solution prepared by dissolving 16.20 g of the non-volatile non-electrolyte urea {CO(NH₂)₂} in 156 g of water.
The relative lowering of vapor pressure is one of colligative property. That means the vapor pressure of the solution should be lower than the vapor pressure of solvent i.e. water. The formula to calculate the vapor pressure of the solution is (P° - P)/P° = x, where P° = vapor pressure of solvent i.e. water = 17.54 torr.
P = vapour pressure of solution x = mol fraction of solute = (mol of solute)/(total mol)Mol of solute = mass / molar mass = 16.20 g /60g/mol = 0.27 mol
Mol of solvent = mass / molar mass = 156g/18g/mol = 8.66 mol
Total moles = 0.27 mol + 8.66 mol = 8.93 mol
Hence, x = (0.27mol) /(8.93 mol) = 0.0302.
Now put these data into the above equation to find the vapor pressure of solution(P).
=> P = P° ( 1 - x )
=> P = 17.54 ( 1 - 0.0302 )
=> P = 17.54 × 0.9698
=> P = 17.01
Hence, the required vapour pressure of water is 17.01 torr at 293 k.
To learn more about vapour pressure, refer:
https://brainly.com/question/2693029
#SPJ4
what is the molarity and osmolarity of a 0.9 nacl solution
Explanation:
a 1M solution of a nonionizing substance such as glucose is a 1 Osmolar solution; a 1M solution of NaCl = 2 Osm; and a 1M solution of Na2SO4 =3 Osm. So in our example, the osmolarity of the 0.9% NaCl solution is 0.15M * 2 = 0.3 Osm.0.9% NaCl solution has a molarity of 154 mmol/L whether the solution volume is 1 dL, 1 L, 1 μL, or an Olympic-size swimming pool! Osmolarity is the ratio of osmole content to total solution volume.
The molarity and osmolarity of a 0.9 NaCL solution is 154 μM and 308 μM respectively.
What is osmolarity?The quantity of solute molecules per litre of solution is known as osmotic concentration, also referred to as osmolarity, and it serves as a measure of solute concentration. In the same way that a solution's molarity is represented by the letter "M," a solution's osmolarity is typically expressed as Osm/L.
Molarity of 0.9% NaCL solution =
0.9% = 9 grams of NaCL in 100 ml of H₂O
Molarity = weight in grams/GMW × v in ml/1000
= [tex]$\frac{9}{58.44} \times \frac{100}{1000}[/tex]
= 0.00154 M
= 0.00154 × 10⁶
= 154 μM
osmolarity of 0.9% NaCL solution =
Multiply molarity by no. of osmoles
In NaCL the osmoles are Na⁺ and CL⁻ = 2
osmolarity = 154 × 2
= 308 μM
Thus, The molarity and osmolarity of a 0.9 NaCL solution is 154 μM and 308 μM respectively.
Learn more about osmolarity
https://brainly.com/question/13597129
#SPJ4
Complete question:
1. what is the molarity and osmolarity of a 0.9% NaCl solution that we will be using to dilute the blood. (NaCL molecular weight= 58.44 g/mol)
It takes 2 cups of water to cook 1 cup of rice. Clearcheck how much rice can you cook with 0. 5 cups of water? cups of rice how much water does it take to cook 6. 5 cups of rice? cups of water.
From the given ratio, it takes 2 cups of water to cook 1 cup of rice;
one can cook 0.25 cups of rice with 0.5 cups of waterit will require 13 cups of water to cook 6.5 cups of riceWhat are ratios?Mathematicians use the term "ratio" to compare two or more numbers. It serves as a comparison tool to show how big or tiny an amount is in relation to another.
Considering the given ratio in order to determine the cups of water required to cook any given cups of rice:
It takes 2 cups of water to cook 1 cup of rice
The ratio of cups of water to cups of rice is 2 : 1
The cups of rice that can you cook with 0. 5 cups of water is 0.5 * 1/2 = 0.25 cups of rice.
The cups of water that it will take to cook 6. 5 cups of rice is 6.5 * 2 = 13 cups of water.
Learn more about ratios at: https://brainly.com/question/12024093
#SPJ1
which are true about lubricants for cutting? they are composed almost entirely of hydrocarbons with some additives. they should be used at lower cutting speeds than other types of cutting fluids. they make cutting surfaces smoother. they dissolve easily in water they make it easier for cutting chips to not to stick to the cutting tool. they reduce the temperature of the cutting tool, but not as much as other cutting fluids.
A lubricant must keep its properties in the presence of additives and other items. Lubricating oil colours are more of a test for a grade or brand of oil's consistency than they are for its attributes. Thus, option B is correct.
What are the characteristics of lubricants?There are four different kinds of liquid lubricants. Mineral oil a. It is a material made from petroleum. These oils are stable at high temperatures because they have a high paraffine and naphthanic content.
Examples include steam cylinder oil, wire rope oil, refrigeration grade oil, gear oil, machine or engine oil, and circulating oil.
Therefore, they should be used at lower cutting speeds than other types of cutting fluids. They make cutting surfaces smoother.
Learn more about lubricants here:
https://brainly.com/question/30082267
#SPJ4
Whats the answer for this question
In other words, the total number of a particular atom is the product of its subscript (s) and the coefficient of the chemical formula of the compound.
More on the number of atoms in compounds can be found here: https://brainly.com/question/1686912
#SPJ1
a student uses a graduated cylinder and a balance to determine the density of ethanol in three trials. the data from this process are shown below. the actual density of ethanol is 0.789 g/ml.
The average of the three trials is 0.791 g/ml, which is close to the actual density of ethanol (0.789 g/ml).
What is the ethanol ?Ethanol is an organic chemical compound, also known as ethyl alcohol, that is found in alcoholic beverages and has many uses in industry. It is produced by the fermentation of sugar and starches, such as corn and wheat, and is often used as an additive in gasoline. Ethanol has a variety of practical applications, including being used as a solvent, a fuel, an antiseptic and a preservative. It is also used in the manufacture of perfumes, paints, solvents, plastics and pharmaceuticals.
Trial 1: Mass = 42.3 g, Volume = 53.5 ml
Density: 42.3 g / 53.5 ml = 0.791 g/ml
Trial 2: Mass = 42.1 g, Volume = 53.4 ml
Density: 42.1 g / 53.4 ml = 0.790 g/ml
Trial 3: Mass = 42.2 g, Volume = 53.3 ml
Density: 42.2 g / 53.3 ml = 0.792 g/ml
The average of the three trials is 0.791 g/ml, which is close to the actual density of ethanol (0.789 g/ml).
To learn more about ethanol
https://brainly.com/question/20814130
#SPJ4
The boxes below represent areas filled with the same gas at two different temperatures. T= 18°C T = 45°C a. Draw a model of particles of the gas in each box. Then draw arrows to indicate the velocities of the particles. (1 point) b. Write two or three sentences relating the temperature, the average kinetic energy, and the motion of the particles. (2 points)
The average velocity of the gas on 18° C is [tex]\sqrt{\frac{8 \ R \ 18}{\pi \ M} }[/tex].
The average velocity of the gas on 45° C is [tex]\sqrt{\frac{8 \ R \ 45}{\pi \ M} }[/tex]
The average velocity of gas = [tex]\sqrt{\frac{8 \ RT}{\pi \ M} }[/tex]
R= gas constant
M= molecular mass of gas
T= temperature
Average Kinetic energy increases with the temperature. The velocity of the molecules also increases. Different molecules are moving with different speeds so we take the average of the motion of particles.
Average Kinetic energy = [tex]\frac{3}{2} K \ T[/tex]
To learn more about average velocity
brainly.com/question/9820870
#SPJ4
What is the Index Value for an exposure of low?
The concept is to provide diagnostic images using the optimal amount of radiation. If the index is too low, it may indicate poor image quality. If the dose index is too high, it may mean using more radiation than is needed for imaging.
Various Kinds of Index NumbersThere are three kinds of index numbers, namely:
a. Price index figures, namely comparative figures to measure price changes from one period to another.
b. Number index (quantity), which is a comparison number to measure changes in the amount from one period to another.
c. Value index number, which is a comparison number to measure changes in value from one period to another. Value is calculated by multiplying the price by the amount (quantity).
Your question is incomplete but most probably your full question was:
Explain. What is the Index Value for an exposure of low?
Learn more about index value at https://brainly.com/question/8154168.
#SPJ1
why does ammonia have a larger henry's law constant
Ammonia has a larger henry's law constant because ammonia has a very strong hydrogen bon-ding with water rather than simple in-ter-molecular forces. It can be measured as 1.62 x 10-5 atm/mole.
Henry's law constant: Higher the value of henry's law constant, the lower will be the solubility of the gas. It can be explained by using the equation of the Henry's Law standard state of the binary mixture is where the activity of the solute is related with the mole fraction.
Ammonia is a colorless gas having a sharp suffocating o-dor. It dissolves easily in water to form a ammonium hydroxide solution which can cause irr-itation and burns. Ammonia gas will be easily compressed and it forms a clear, colorless liquid under pressure.
To now more about Ammonia here
https://brainly.com/question/15409518
#SPJ4
union carbide contended that the accident was the result of ____
Union Carbide contended that the accident was the result of sabotage.
Union Carbide was a chemical company that was responsible for the 1984 Bhopal disaster, which was one of the worst industrial accidents in history. The disaster resulted in the release of toxic gas into the surrounding communities, causing widespread death and injury.
In the aftermath of the disaster, Union Carbide argued that the accident was the result of sabotage, claiming that someone intentionally introduced water into the tank containing the toxic gas, which caused the release of the gas. The company maintained this position for several years, despite significant evidence suggesting that the disaster was the result of poor safety practices, inadequate maintenance, and inadequate emergency planning.
However, this claim of sabotage was widely discredited, and Union Carbide eventually admitted that the disaster was the result of operational and design failures at the plant, including the lack of safety features and the inadequate training of employees.
To learn more about carbide, visit:
https://brainly.com/question/4499981#
#SPJ11
how much larger is a uranium nucleus compared to an iron nucleus
The larger is a uranium nucleus as compared to an iron nucleus is the radius of the uranium is 7.4 × 10⁻¹⁵ m and the iron is 4.59 × 10⁻¹⁵ m .
The average radius of the nucleus with A nucleons is R = R0 A1^/3,
where ,
R0 = 1.2 × 10⁻¹⁵ m.
A = number of protons + number of nucleons
The Radius = R = R0 A1^/3
The radius of Iron = 56
The Radius = R = 1.2 × 10⁻¹⁵ m (56)¹/³
The Radius = 4.59 × 10⁻¹⁵ m
The Radius of the Uranium = 235
The Radius = R = 1.2 × 10⁻¹⁵ m (235)¹/³
The radius = 7.4 × 10⁻¹⁵ m
To learn more about uranium here
https://brainly.com/question/19339318
#SPJ4
Classify these substances as molecular or ionic. glucose C6H12O6, water H2O, calcium oxide CaO , chlorine Cl2 , silver nitrate AgNO3, potassium chloride, KCI methane CH4, barium sulfate, Baso4, ammonia, NH3 sodium hydroxide, NaOH copper sulfide, Cus
Molecular substances are substances composed of molecules, which are formed by the combination of atoms through covalent bonds.
The classification of the substances as molecular or ionic is as follows:
Molecular: Glucose, Water, Chlorine, Methane, Ammonia, Copper sulfide
Ionic: Calcium oxide, Silver nitrate, Potassium chloride, Barium sulfate, Sodium hydroxide.
In a molecular substance, atoms share electrons to form stable molecular structures. Unlike ionic compounds, where ions are held together by electrostatic forces, molecular substances have atoms held together within a molecule by covalent bonding.
These substances tend to have lower melting and boiling points compared to ionic compounds. This is because the intermolecular forces between molecules, such as van der Waals forces or hydrogen bonding, are weaker than the strong electrostatic forces between ions. Consequently, molecular substances often exist as gases, liquids, or solids with relatively low melting points.
Molecular substances consist of covalently bonded atoms, whereas ionic substances contain ions held together by electrostatic forces.
Therefore, the classification of the substances as molecular or ionic is as follows:
Molecular: Glucose, Water, Chlorine, Methane, Ammonia, Copper sulfide
Ionic: Calcium oxide, Silver nitrate, Potassium chloride, Barium sulfate, Sodium hydroxide.
For more details regarding molecular substances, visit:
https://brainly.com/question/3210662
#SPJ12
what property of a solution is described by its ph?
The property of the solution is described by the pH is the Acid - Base property.
The pH of the solution is the measure of hydrogen ion concentration in the solution. The pH of the solution describes the acid nature and the basic nature of the solution. The pH scale ranges from the 0 to 14 .
If the pH of the solution is blow the value 7 , it means that the solution is acidic in nature. If the pH of the solution is above 7 than the solution is basic in nature. Th pH value 7 is for neutral solution.
To learn more about pH here
https://brainly.com/question/15289741
#SPJ4
when benzene is reacted with hot sulfuric acid or a mixture of so3 in h2so4, which group replaces a ring h?
When benzene is reacted with hot sulfuric acid or a mixture of so3 in h2so4, which group replaces a ring h?
The resulting product is the substitution of one of the hydrogen atoms in the benzene ring with a sulfonic acid group (-SO3H).
This reaction is known as sulfonation, and it results in the formation of a sulfonic acid derivative of benzene.
What is Sulfonation?
Sulfonation is a chemical process in which a sulfonic acid group (-SO3H) is introduced into a molecule. It is typically performed as a reaction between a sulfonic acid anhydride and a substrate molecule. The result of sulfonation is a sulfonated product, which has increased water solubility and improved acidity compared to the original substrate. Sulfonation is commonly used in the synthesis of surfactants, detergents, and other industrial and commercial products.
Here you can learn more about Sulfur Acid
brainly.com/question/4025929
#SPJ4
in order to move a negative charge farther away from a positive charge, then you need
In order to move a negative charge farther away from a positive charge, then you need to apply a force in the direction away from the positive charge.
Coulomb's law states that the force between two point charges is directly proportional to the magnitude of the charges and inversely proportional to the square of the distance between them. The force between charges of opposite sign is attractive, while the force between charges of the same sign is repulsive.
Therefore, to move a negative charge farther away from a positive charge, a force must be applied in the direction away from the positive charge. This is because the force of attraction between the two charges acts to pull the negative charge towards the positive charge, and this force must be overcome in order to move the negative charge away. The magnitude of the force required will depend on the magnitude of the charges and the distance between them.
In general, moving charges in electric and magnetic fields requires the application of forces, and the direction and magnitude of these forces can be predicted using Coulomb's law and other laws of electromagnetism. Understanding these forces is important in many areas of science and technology, including electronics, electrical engineering, and particle physics.
Learn more about positive charge here: brainly.com/question/2903220
#SPJ4
what percent ( ) of the total calories in your food product is from fat
20-35% of the total calories that are obtained from out food products are from the fats.
The food that we eat is rich in a number of essential nutrients which are required by our body and these include protein, carbohydrates, fats, vitamins, minerals etc. Our body breaks down the complex food in simpler substances in order to produce energy which is necessary to perform the day to day activities in our life.
The major sources of calories in the food are the carbohydrates followed by the fats and proteins. About 45 to 65 percent of the total calories comes from the carbohydrates, 20 to 35 percent comes from the fat, and about 10 to 35 percent of the calories come from protein.
To know more about fats here
https://brainly.com/question/14625990
#SPJ4
What is the trend in ionization energy as you go down a group?
answer choices
a. Down the group Ionization energy increases because atomic radius decreases.
b. Down the group Ionization energy decreases because atomic radius decreases.
c. Down the group Ionization energy decreases because atomic radius increases.
d. Down the group Ionization energy increases because atomic radius increases.
The trend in ionization energies as you go down a group is C. Going down the group Ionization energies decrease as the atomic radius increase.
Definition of Ionization EnergyIonization energy is the energy required to remove an electron from a neutral atom in gaseous form. Also as with the atomic radius, the periodicity of this one element also has the following tendencies:
In a group from top to bottom, the ionization energy of an element decreases because the atomic radius increases, so that the attraction of the nucleus to the outermost electrons becomes weaker and the ionization energy decreases.
In one period, the ionization energy of the elements increases from left to right because the atomic radius is getting smaller, so that the attraction of the nucleus to the outermost atom is getting stronger and the ionization energy is increasing.
Learn more about Ionization Energy at: https://brainly.com/question/11723795
#SPJ4
Coral and algae demonstrate mutualism, a symbiotic relationship where both organisms benefit. Select the option that is also an example of a mutualistic symbiotic relationship.
Cattle egrets follow livestock herds. As the livestock walk, they stir up insects in the grass, and the cattle egrets feed on the insects
Remoras hitchhike on large fish and sharks, eating dead skin and parasites off the larger animals
Wasps lay eggs on tomato hom worms to develop When the larvae hatch, they feed on the horn worms
Clownfish live inside anemones, protected from predators by the anemones' stinging tentacles
Clownfish live inside anemones, protected from predators by the anemones' stinging tentacles.
Clownfish and sea anemones are a classic example of a mutualistic symbiotic relationship. The relationship between these two species is mutually beneficial, with each species providing benefits to the other.
Key points:
Protection: Clownfish are protected from predators by the stinging tentacles of the sea anemone. This is because the tentacles contain toxins that deter predators, but clownfish are immune to the toxins, allowing them to reside safely within the anemone.Nutrients: Clownfish provide the anemone with food in the form of waste and uneaten bits of food. This waste provides the anemone with essential nutrients, helping it to thrive.Shelter: The anemone provides the clownfish with a safe and secure place to live and lay eggs. Clownfish are able to retreat into the anemone whenever they feel threatened.Mutual Defense: The presence of clownfish can also protect the anemone from potential predators. Clownfish will use their bodies to block the entrance to the anemone, preventing predators from getting close.Learn more about the mutualistic symbiotic relationships here:
https://brainly.com/question/29556323
#SPJ4
Enthalpy of solution for MgSO4(s) and MgSO47H2O (s) are -20.3kcal and 4.8kcal. Calculate hydration enthalpy of MgSO4
[tex]$$\mathrm{MgSO}_{4(\mathrm{~s})} \stackrel{\Delta \mathrm{H}_{\mathrm{s}_1}}{\longrightarrow} \mathrm{MgSO}_4 \cdot 7 \mathrm{MH}_2^{+2} \mathrm{O}+\mathrm{SO}_{4(\mathrm{aq})}^{2-}$$$\\\therefore \quad \Delta \mathrm{H}_{\mathrm{s}_1}=\Delta\\\mathrm{H}_{\mathrm{Hyd}}+\Delta\mathrm{H}_{\mathrm{s}_2}$$\\\therefore \quad-20.3=\Delta \mathrm{H}_{\mathrm{Hyd}}+4.8$$\\\therefore \quad \Delta \mathrm{H}_{\mathrm{Hyd}}=-25.1 \mathrm{kcal} / \mathrm{mole}$[/tex]
The change in enthalpy that occurs when one mole of a gaseous ion dissolves in enough water to generate an infinitely diluted solution under a typical environment of 1 bar pressure is known as the hydration enthalpy (HHyd) (infinite dilution means a further addition of solute will not cause any heat change).
Enthalpy of hydration can be defined as the quantity of energy released upon dilution of one mole of gaseous ions in simple terms. With water acting as the solvent, it can be compared to the enthalpy of solvation. Also known as hydration energy, enthalpy of hydration has a constant negative value.
Learn more about Enthalpy here:
https://brainly.com/question/13775366
#SPJ4
How, many stereoisomers of the 2, .3-dimethylbutane are possible?
4
None 2 3
The 2,3-dimethylbutane structure is as follows: There are no chiral centers in the specified structure. Additionally, the supplied molecule has a plane of symmetry that often eliminates stereoisomerism. As a result, there are no stereoisomers.
In contrast to atomic connection, stereoisomers differ in the spatial arrangement of their atoms. The mirror-image stereoisomers, a non-superimposable pair of two molecules that are mirror images of one another, are one of their most intriguing types of isomers.
What are stereoisomers exactly?
Stereoisomers are isomers with the same composition (i.e., similar parts), but different orientations in space, according to a general description.
Learn more about stereoisomers:
brainly.com/question/24128816
#SPJ4
identify the hybridization of valence orbitals of the carbon atom in compound x
The hybridization of the carbon atom's valence orbitals cannot be ascertained without knowing more about the chemical "x." In order to calculate the number of bonds and the molecular shape of the molecule,
To create a hybrid, two or more distinct species, breeds, or types of plants or animals must be crossed. This can be accomplished either by artificial crossbreeding in the wild or controlled breeding in agriculture. The child may exhibit qualities from both parents, resulting in a blend of traits that may be advantageous or enhanced in some way. Through the gradual accumulation of genetic alterations over time, hybridization can potentially result in the emergence of new species. The bonding configuration between atoms in a molecule, which defines its shape and reactivity, is referred to as hybridization in chemistry.
Learn more about hybridization here:
https://brainly.com/question/29020053
#SPJ4