The number of kilograms of fuel that are contained in one canister is 1.03 Kilograms
Given:
mass = density x volume
Density= 0.710 g/cm³
volume = 1.45 L
To ensure consistency, convert 1.45 l into cm³
1.45 L= 1450 cm³
mass = 0.710g/cm³ x 1450 cm³ = 1029.5 grams
convert grams to Kg
(1 kg x 1029.5 grams) /1000 grams = 1.0295 Kg ≅1.03 kg
What is mass volume density?
A material substance's mass per cubic centimetre. D is density, M is mass, and V is volume, and the formula for density is d = M/V. In terms of grammes per cubic centimetre, density is frequently expressed.
Definition of density
It is a material substance's mass expressed as a percentage of its volume. Additionally, density is expressed in terms of kilograms per cubic metres of space. One kilogram per cubic metre is the density of air, for instance.
To know more about density:
https://brainly.com/question/16693125
#SPJ1
Draw a graph of rate on the y-axis and temperature on the x axis. The graph should Indicate that the reaction rate increases with increase in temperature
The graph of reaction rate on the y-axis and temperature on the x-axis indicates that the reaction rate increases with an increase in temperature.
What is the reaction rate?The rate at which a chemical reaction occurs is known as the reaction rate, which is proportional to both the increase in a product's concentration per unit time and the decrease in a reactant's concentration per unit time. There is a wide range in reaction times.
The reaction rate increases with increase in:
temperatureconcentrationpressurepresence of a catalystLearn more about the rate of reaction at: https://brainly.com/question/24795637
#SPJ1
How does rate of diffusion relate with molecular
weight of gases?
Answer:
The rate of diffusion of a gas is directly related to the square root of its molecular weight, with lighter gases diffusing faster than heavier gases.
Explanation:
Gases with lower molecular weights diffuse more quickly than gases with higher molecular weights because they have lower mass and therefore require less energy to move.
Initially 100 milligrams of a radioactive substance was present. After 4 hours the mass had decreased by 3%. If the rate of decay is proportional to the amount of the substance present at time t, determine the half-life of the radioactive substance.
The half-life of the radioactive substance is approximately 2.06 hours.
The half-life of a radioactive substance is the amount of time required for half of the initial amount of the substance to decay. If the rate of decay is proportional to the amount of the substance present at time t, the half-life of the substance can be determined as follows:
Let t be the half-life of the substance, then after t hours, the amount of the substance present will be 100 mg × (1/2) = 50 mg.
At time 4 hours, the amount of the substance present is 100 mg × (1 - 3%) = 97 mg.
Since the rate of decay is proportional to the amount of substance present, the half-life can be calculated as follows: t = 4 hours × (50 mg / 97 mg) = 2.06 hours.
Therefore, the half-life of the radioactive substance is approximately 2.06 hours.
Learn more about half-life:
brainly.com/question/24710827
#SPJ4
Normal saline is a solution of aqueous sodium chloride with a concentration of 0.90% (glmL): Express this concentration in molarity; then indicate whether the osmotic pressure of each of these solutions is hypotonic, isotonic, or hypertonic compared to normal saline: a_ 1.0 M aq: KCI b. 0.5 M aq: K2SO4 C_ 4.3 M aq NHACI d. 0.15 M aq: sugar
The concentration of 0.90% aqueous sodium chloride can be expressed in molarity as follows:
0.90 g/mL of sodium chloride = 0.0090 g/mL × 1 mole / 58.44 g = 0.000155 M
Next, we can compare the osmotic pressure of each solution to normal saline:
A) 1.0 M aq: KCl is hypertonic compared to normal saline. The osmotic pressure of a solution is directly proportional to its concentration. Therefore, a 1.0 M solution of KCl has a higher concentration and higher osmotic pressure than normal saline, which makes it hypertonic.
B) 0.5 M aq: K2SO4 is hypotonic compared to normal saline. A 0.5 M solution of K2SO4 has a lower concentration and lower osmotic pressure than normal saline, which makes it hypotonic.
C) 4.3 M aq: NH4Cl is hypertonic compared to normal saline. A 4.3 M solution of NH4Cl has a higher concentration and higher osmotic pressure than normal saline, which makes it hypertonic.
D) 0.15 M aq: sugar is hypotonic compared to normal saline. A 0.15 M solution of sugar has a lower concentration and lower osmotic pressure than normal saline, which makes it hypotonic.
Learn more about sodium chloride:
brainly.com/question/9811771
#SPJ4
The threshold frequency 0 describes the smallest light frequency capable of ejecting electrons from a metal.
Determine the minimum energy 0 of a photon capable of ejecting electrons from a metal with 0=5.43×1014 s−1.
What is the maximum kinetic energy electron of electrons ejected from this metal by light with a wavelength of 245 nm?
The minimum energy of the photon is 3.60 * 10⁻¹⁹
The maximum kinetic energy electron ejected is 4.52 * 10⁻¹⁹ J
What is the minimum energy of the photon?The minimum energy of the photon is calculated as follows:
E = hν
where:
h is the Planck's constant = 6.626x10-34 Js
ν is the frequency = 5.43 * 10¹⁴ s⁻¹
E = 6.63 * 10⁻³⁴ Js * 5.43 * 10¹⁴ s⁻¹
E = 3.60 * 10⁻¹⁹
The maximum energy is calculated as follows:
E = hc / λ
where
c is the speed of light = 3 * 10⁸ m/s
λ is the wavelength in m = 2.45 * 10⁻⁷m
E = 6.63 * 10⁻³⁴ * 3 * 10⁸ / 2.45 * 10⁻⁷
E = 8.12 * 10⁻¹⁹ J
The maximum kinetic energy electron ejected = 8.12 * 10⁻¹⁹ J - 3.60 * 10⁻¹⁹J
The maximum kinetic energy electron ejected = 4.52 * 10⁻¹⁹ J
Learn more about photons at: brainly.com/question/19427469
#SPJ1
Which organic compound has a branched hydrocarbon group. Select one: a. 2-propanol. b. normal propyl acetate. c. acetone. d. 2-butanone.
The correct option is D. 2-butanone organic compound has a branched hydrocarbon group.
Natural compounds are a substance that consists of covalently- bonded carbon and hydrogen and frequently with other elements. organic compounds examples are benzoic Acid, fragrant compounds, benzoic aldehyde, propanoic acid, butanoic acid, malonic acid, amines, heterocyclic compounds, VOC, benzoic acid, and diethyl malonate.
In chemistry, many authors bear in mind that an organic compound is any chemical compound that includes carbon-hydrogen or carbon-carbon bonds, although, the definition of "natural" versus "inorganic" varies from author to writer, and it's far a subject of debate. The chemicals of living matter are called organic compounds due to their affiliation with organisms and due to the fact they're carbon-containing compounds. organic compounds, which are the compounds associated with existence procedures, are the difficult count of a number of natural chemistry.
To learn more about Organic compounds visit here:
brainly.com/question/5994723
#SPJ4
I want answer for this question and explaination
The information that will be the most useful to define a constraint for the device is option D. the temperature at which a reaction becomes unsafe for people
What is the chemical reaction about?The temperature at which a reaction becomes unsafe for people is the most important information to define a constraint for the device, as safety is a primary concern when designing any device for human use. If the reaction releases heat that exceeds a safe temperature, it could cause injury to the user, so it's essential to have a constraint in place to ensure that the reaction stays within safe limits.
Therefore, Other factors such as the average size of a person's foot, the boiling and freezing points of water, and the most popular color for similar products, while important for other aspects of the design, are not as critical for ensuring the safety of the device and its users.
Learn more about chemical reaction at:
https://brainly.com/question/25769000
#SPJ1
See transcribed text below
A chemist is designing a warming device for keeping a person's feet warm when they are outside during cold weather. The device will contain substances that undergo a chemical reaction and release heat.
Which information will be the most useful to define a constraint for the device?
A. the average size of a person's foot
B. the boiling and freezing points of water
C. the most popular color for similar products
D. the temperature at which a reaction becomes unsafe for people
Which of the following substances exhibits H bonding? For those that do, draw two molecules of the substance with the H bonds between them. (a) C2H6 (b) CH3OH (c) CH3CONH2 (d)CH3COOH (e)CH3CH2OH (f) CH3COCH3
(b) CH3OH For those that do, draw two molecules of the substance with the H bonds between them.
What is molecules ?Molecules are the smallest particles of any given substance that are made up of two or more atoms chemically bonded together. Molecules can contain different types of atoms, such as hydrogen, oxygen, nitrogen and carbon. Molecules can be single atoms such as oxygen or they can be large and complex such as proteins and DNA. Molecules are the building blocks of matter and are essential for the formation of all physical objects. Molecules can be found in both organic and inorganic materials, and they play a vital role in all of the chemical processes that occur in nature. Molecules are essential for life, as they are responsible for the formation of proteins and other molecules that form the structures and functions of cells, tissues, and organs.
H-C-O-H
H | H
|
H-C-O-H
H | H
To learn more about molecules
https://brainly.com/question/26044300
#SPJ4
When determining the density of the ethanol solution in part B, what volume of the solution should be run into the flask from the burette in each trial?
A .20 to 25 ml
B. 25 to 30 ml
When measuring the density of the ethanol 25 to 30 ml should be run in.
What is the density?Density is the measure of mass per unit volume of a substance or object. It is defined as the ratio of the mass of an object to its volume and is usually expressed in kilograms per cubic meter (kg/m^3) or grams per cubic centimeter (g/cm^3).
The density of a substance determines its behavior and how it will interact with other substances in the environment. We know that the density of the ethanol can be measured when we obtain the volume and the mass of the solution.
Learn more about density:https://brainly.com/question/29775886
#SPJ1
1) If an ideal gas has a pressure of 3.93 atm, a temperature of 23.45 ∘C, and a volume of 33.57 L, how many moles of gas are in the sample?
2) The combustion of octane, C8H18, proceeds according to the reaction shown.
2C8H18(l)+25O2(g)⟶16CO2(g)+18H2O(l)
If 546 mol of octane combusts, what volume of carbon dioxide is produced at 12.0 ∘C and 0.995 atm?
5.4 mole of gas are in the sample. 57472.01 L volume of carbon dioxide is produced at 12.0 ∘C and 0.995 atm.
What is an ideal gas equation ?The ideal gas equation is represented as: PV = nRT. In this equation, P refers to the pressure of the ideal gas, V is the volume of the ideal gas, n is the total amount of ideal gas that is measured in terms of moles, R is the universal gas constant, and T is the temperature.
1. According to the ideal gas laws, we know,
PV = nRT,
where, P = Pressure, V= Volume, T= Temperature in K, R = universal gas constant = 0.082 lit-atm/K/mol
Now,
T= 23.45°C = (273+23.45) K = 296.45 K
P = 3.93 atm and V = 33.57 L
By substituting these values, we get,
n = 3.93 × 33.57 / 0.082 × 296.45
= 131.93 / 24.3
= 5.4 mole
2. Given:
Moles of octane = 297 moles
According to the given reaction:-
2 moles of octane on reaction produces 16 moles of carbon dioxide
1 mole of octane on reaction produces 16/2 moles of carbon dioxide
297 moles of octane on reaction produces 8*297 moles of carbon dioxide
Moles of carbon dioxide = 2376 moles
Pressure = 0.995 atm
Temperature = 20.0 °C
The conversion of T( °C) to T(K) is shown below:
T(K) = T( °C) + 273.15
T₁ = (20.0 + 273.15) K
= 293.15 K
By ideal gas equation as:
PV=nRT
0.995 atm × V = 2376 mol × 0.0821 L.atm/K.mol × 293.15 K
V = 57472.01 L
Thus, 5.4 mole of gas are in the sample. 57472.01 L volume of carbon dioxide is produced at 12.0 ∘C and 0.995 atm.
To learn more about an ideal gas equation, follow the link;
https://brainly.com/question/28837405
#SPJ1
Use your knowledge of shielding and deshielding effects to match each marked H atom/group of H atoms in the given structure with the expected chemical shift in the 1H NMR spectrum.
A=== 9.2
B======== 2.2
C ======= 3.6
Nuclear magnetic resonance spectroscopy, maximum usually known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic approach to examining local magnetic fields around atomic nuclei. The pattern is positioned in a magnetic discipline and the NMR signal is produced through the excitation of the nuclei pattern with radio waves into nuclear magnetic resonance, which is detected with touchy radio receivers.
The intramolecular magnetic subject around an atom in a molecule adjusts the resonance frequency, for that reason giving get right of entry to information on the electronic shape of a molecule and its personal purposeful agencies. as the fields are precise or quite function to individual compounds, in cutting-edge natural chemistry practice, NMR spectroscopy is the definitive technique to perceive monomolecular organic compounds.
To learn more about NMR visit here:
brainly.com/question/17516931
#SPJ4
Suppose that you have a 1:1 mixture of compounds that is comprised of compound X and compound Y. You desire pure compound X and are planning a recrystallization to enhance the purity. Which solvent below is optimal for your recrystallization? Ethanol (boiling point = 78 °C)
Solubility At
0 °C 100 °C
Compound X 0.05 g/mL 0.20 g/mL
Compound Y 0.02 g/mL 0.40 g/mL Water (boiling point = 100 °C)
Solubility At
0 °C 100 °C
Compound X 0.02 g/mL 0.05 g/mL
Compound Y 0.01 g/mL 0.10 g/mL
Methanol (boiling point = 65 °C)
Solubility At
0 °C 65 °C
Compound X 0.04 g/mL 0.10 g/mL
Compound Y 0.02 g/mL 0.30 g/mL
Acetone (boiling point = 56 °C)
Solubility At
0 °C 56 °C
Compound X 0.10 g/mL 0.50 g/mL
Compound Y 0.20 g/mL 0.50 g/mL
Ethyl Acetate (boiling point = 77 °C)
Solubility At
0 °C 77 °C
Compound X 0.10 g/mL 0.60 g/mL
Compound Y 0.30 g/mL 0.60 g/mL
The optimal recrystallizing agent for compound x should have a melting point of 1 or 5 degrees Celsius.
In chemistry, recrystallization is a technique for purifying chemicals. When a mixture of compound and impurity is dissolved in a suitable solvent, either the compound of interest or the impurity is removed from the solution while the other remains. Recrystallization, also called fractional crystallization, is the process of purifying impure compounds in a solvent. The purification process is based on the principle that the solubility of most solids increases with increasing temperature. The optimal recrystallizing agent for compound x should have a melting point of 1 or 5 degrees Celsius.
Learn more about recrystallization
brainly.com/question/14918321
#SPJ4
A 155- g sample of steam at 100 ∘C is emitted from a volcano. It condenses, cools, and falls as snow at 0 ∘C . (For water, 80. cal (334 J ) is needed to melt 1 g of ice or must be removed to freeze 1 g of water and 540 cal (2260 J ) is needed to convert 1 g of water to vapor at 100 ∘C .)
Part A
How many kilojoules of heat were released?
Answer:
405.1 kJ
Explanation:
The heat released can be calculated as the sum of the heat needed to freeze the steam to snow (80 cal/g x 155 g = 12400 cal) and the heat needed to convert the water to vapor (540 cal/g x 155 g = 84700 cal).
Converting these values from calories to joules, we have:
12400 cal x (4.184 J/cal) = 51416 J
84700 cal x (4.184 J/cal) = 353688 J
So the total heat released is:
51416 J + 353688 J = 405101 J = 405.1 kJ.
The amount of heat energy released when 155g of steam condenses, cools, and falls as snow is approximately 402.51 kilojoules.
Explanation:The first step to solving this problem is to calculate the amount of heat released when the water vapor of mass 155g condenses into liquid water at 1000C. Using the specific heat of steam, which is 540 cal/g, we multiply this value with the mass to get the heat energy. This yields 83700 cal or 350.58 kilojoules.
The next step is to calculate how much heat is released when the liquid water cools from 1000C to 00C. Using the specific heat of water, which is 1 cal/g/0C, and subtracting the final from the initial temperature yields zero heat energy because the water remains at the same temperature during phase change.
Lastly, we calculate the amount of heat released as the water freezes to become ice at 00C by multiplying the mass of the water by the heat of fusion, which is 80 cal/g. This gives us 12400 cal or 51.93 kilojoules. The total heat energy released is the sum of these three values which is 350.58 kJ + 0 kJ + 51.93 kJ = 402.51 kJ.
Learn more about Heat Energy here:https://brainly.com/question/20115359
#SPJ2
how many moles are present in 2.50 x 10^23 molecules of C4H6? show work
2.50 x 10^23 molecules of C4H6 contains 1.25 x 10^23 moles of C4H6.
What do you mean by moles?
Moles are a unit of measurement used to quantify the amount of a substance. They represent the amount of a substance, measured in terms of the number of atoms, molecules, ions, or other particles present in a given sample. For example, one mole of carbon atoms equals 12 grams of carbon.
To calculate this, we use the equation:
Moles = (Number of molecules) / (Avogadro's number)
Moles = (2.50 x 10^23 molecules) / (6.02 x 10^23 molecules/mole)
Moles = 1.25 x 10^23 moles.
To know more about moles,
https://brainly.com/question/29367909
#SPJ1
Determine the number of Al3+ and Cl− ions required to form a neutral ionic compound.
3 chloride ions are required to neutralize the charge of +3 on aluminium ion and the ionic compound formed is AlCl3 .
What is an ionic compound ?Te term ionic compounds is defined as compounds made up of ions that produce charged particles when an atom gains or loses electrons. A cation is an ion charged positively, and an anion is an ion charged negatively.
Al has a charge of +3. Cl has a charge of -1. Therefore,3 chloride ions are required to neutralize the charge of +3 on aluminium and the neutral ionic compound AlCl3 is formed.
Thus, 3 Al3+ and 1 Cl− ions required to form a neutral ionic compound AlCl3.
To learn more about an ionic compound, follow the link;
https://brainly.com/question/9167977
#SPJ1
Which of the following solutions will have the lowest freezing point?A) 0.015 m BaCl2 B) 0.0100 m Na2CO3 C) 0.035 m CH3CH2CH2OH D) 0.0100 m KBr
The solution having the lowest freezing point is 0.015 M BaCl₂. The Van Hoff factor for this solution is 3 and have greater concentration here.
What is freezing point ?Freezing point of a solution is the temperature at which it converts from solid to liquid. The freezing point of a substance is dependent on the bond type, temperature, pressure and presence of impurities if any.
The depression in freezing point by the addition of a non volatile solid is a colligative property. It is directly proportional to the molality of the solution. The Vant Hoff factor of the solution is the number of ions it can furnish.
Here, the number ions furnished by barium chloride and sodium carbonate are 3. All other solutions have one or 2 ions in solution. Here, the concentration of BaCl₂ is greater and it will lower in freezing point much than other solutions.
Find more on freezing point:
https://brainly.com/question/3121416
#SPJ1
Answer the following for a Bi atom. Include the sign of the charge of the ion even if it is positive and place it in front of the number. For example, enter -3 not 3- or 3. The valence electron configuration is chemPadHelp The number of unpaired electrons is The number of occupied p orbitals in the atom is The charge on its most common ion is
The metal bismuth has a pinkish tint and is white, crystalline, and brittle. The thermal conductivity of bismuth is lower than that of any other metal besides mercury, and it is the most diamagnetic of all metals.
What is Bismuth atoms?The largest Hall effect of any metal and a high electrical resistance are also properties of bismuth (i.e. the greatest increase in electrical resistance when placed in a magnetic field).
Despite dissolving in strong nitric air, bismuth is stable to oxygen and water. When mixed with water, all bismuth salts produce insoluble compounds.
Although not a known carcinogen, bismuth is a recognized hazardous element, although some of its derivatives should be handled carefully due to their corrosiveness (e.g. bismuth chloride).
Therefore, The metal bismuth has a pinkish tint and is white, crystalline, and brittle. The thermal conductivity of bismuth is lower than that of any other metal besides mercury, and it is the most diamagnetic of all metals.
To learn more about Bismuth, refer to the link:
https://brainly.com/question/13721046
#SPJ1
which of the following is a molecule? select the correct answer below: water ozone glucose all of the above
All of the options listed are molecules. The correct answer is D.
A molecule is a combination of two or more atoms that are chemically bonded together. The bonding of atoms forms a new substance with its own unique properties, which are different from the properties of the individual atoms that make it up.
Water (H₂O) is a molecule made up of two hydrogen atoms and one oxygen atom.
Ozone (O₃) is a molecule made up of three oxygen atoms.
Glucose (C₆H₁₂O₆) is a molecule made up of six carbon atoms, twelve hydrogen atoms, and six oxygen atoms.
In summary, a molecule is a smallest particle of a substance that retains the chemical composition and properties of that substance, and all of the options listed (water, ozone, and glucose) are examples of molecules.
Learn more about molecules here: https://brainly.com/question/1533548
#SPJ4
Please help me answer this question
The enthalpy change (∆H) from the formation of 2H --> H₂ is: A. -432 kJ/mol.
How to calculate the enthalpy change using the bond energies?Bond energy is the average energy needed to break the bond in a molecule within a reaction. We can use the bond energy to calculate the ∆H of the reaction as follows:
∆H = (∑ bond energies of the reactants) – (∑ bond energies of the products)
∆H = (2 x H) – (1 x H-H)
∆H = (2 x 0) – (432) kJ/mol
∆H = -432 kJ/mol
Hence, the enthalpy change from the formation of H₂ is: -432 kJ/mol.
Learn more about enthalpy change here https://brainly.com/question/28074937
#SPJ1
Mark all of the levels of structure you would expect to find in a protein that functions as a complex with multiple polypeptide subunits. Group of answer choices
a. Quaternary structure
b. Secondary structure
c. Primary structure (sequence)
d. Tertiary structure
The level of structure that one would expect to be found in a protein that functions as a complex with multiple polypeptide subunits is quaternary structure. the correct answer is A.
Quaternary structure is the level of structure that one would anticipate to see in a protein that performs as a complex with many polypeptide subunits.
Many proteins consist of just one polypeptide chain and only have the three levels of structure we just covered. Nevertheless, some proteins are composed of several polypeptide chains, also referred to as subunits. These component parts combine to form the protein's quaternary structure.
Hemoglobin is one instance of a protein having quaternary structure that we've already come across.
Learn more about protein structure at https://brainly.com/question/14919325
#SPJ4
When 1.0 g of gasoline burns, it releases 11 kcal of heat. The density of gasoline is 0.74 g/mL. How many megajoules are released when 1.0 gal of gasoline burns?
It will going to release 129 MJ of heat.
What is gasoline?Mass of gasoline = 1.0 g, Heat released = 11 kcal. Density of gasoline = 0.74 g/mL
Here, we are asked to calculate heat in megajoules, released when 1.0 gal of gasoline burns.
First, let’s find the volume of 1.0 gal gasoline in mL = 1.0 gal gasoline = 3785.41 mL
Now, let’s find the mass of gasoline in g:
Mass = Density volume
= 0.74 g/mL 3785.41 m = 2801.20 g.
Given, 1 g releases 11 kcal. Let’s find the heat released by 2800 g:
= 2801.20 g
= 30813.2 kcal
Now, let’s convert the heat in kcal to MJ:
1 kcal = 0.004186 MJ
Therefore, heat in megajoules will be: = 30813.2 kcal = 128.98 MJ
Therefore, It will going to release 129 MJ of heat.
To learn more about Gasoline, refer to the link:
https://brainly.com/question/29991915
#SPJ1
according to the bohr effect, as the concentration of co2 increases, the concentration of h question blank 1 of 1
When the concentration of CO2 increases, the concentration of H+ ion increases. This is according to the Bohr's effect.
Bohr's effect can be explained as the observation that increases in the carbon dioxide partial pressure of blood or decreases in blood pH result in a lower affinity of hemoglobin for oxygen. This shifts right ward shift in the Oxygen Hemoglobin Dissociation Curve. The Bohr Effect allows for enhanced unloading of oxygen in metabolically active peripheral tissues. It causes the muscles and tissues to release more oxygen when CO2 levels rise. It helps in deliver oxygen to metabolizing tissue such as skeletal muscle where it is needed most. The decrease in carbon dioxide will increase hemoglobin's affinity for oxygen. It means hemoglobin is less likely to release oxygen.
To learn more about Bohr's effect please visit:
https://brainly.com/question/15970643
#SPJ4
The complete question is,
According to the Bohr's effect, as the concentration of co2 increases, the concentration of [tex]H^{+}[/tex] ion increases or decreases?
draw the arrow pushing mechanism for the reaction of ethanol and propionic acid. use h+ in place of dowex.
The arrow pushing mechanism for the reaction of ethanol and propionic acid using H+ in place of Dowex is as follows:
The H+ ion acts as a nucleophile and attacks the carbonyl carbon of propionic acid, forming a tetrahedral intermediate. This intermediate then collapses, resulting in the formation of an ethanol molecule and the release of a proton. The proton is then replaced by the H+ ion, resulting in the formation of an ethyl propionate molecule. The overall reaction is represented by the following equation:
Propionic Acid + Ethanol → Ethyl Propionate + H+Learn more about reaction of ethanol and propionic acid:
https://brainly.com/question/14461903
#SPJ4
Suppose that when you plot the masses of several samples of an unknown substance against the corresponding volumes of water displaced by the samples, the slope of the resulting straight line is 2.7 g/mL. What is the substance's density and probable identity?
The density of the object is 2.7 g/mL and it is aluminum.
What is density?We have to note that the density of the material is the ratio of the mass to the volume of the object. In the case the density was determined experimentally by plotting the masses of several samples of an unknown substance against the corresponding volumes of water displaced by the samples.
We know that the density is the slope of the graph and the density of the object based on the statement in the question is 2.7 g/mL.
Learn more about density:https://brainly.com/question/29775886
#SPJ1
assume a certain element has a density of 10.5 g/ml. you have a bag containing 81.50 g of pellets of this element. what is the volume in ml of the pellets in your bag? use density as a conversion factor to solve this problem.
The volume in mL of the pellets in your bag is 7.76mL.
How to calculate volume?Density is the measure of the mass of matter contained by a unit volume.
The density of a substance can be calculated using the following formula:
Density = mass ÷ volume
According to this question, a certain element has a density of 10.5 g/ml. one has a bag containing 81.50 g of pellets of this element. The density of the element is as follows:
10.5g/mL = 81.50g ÷ volume
volume = 81.50g ÷ 10.5g/mL
Volume = 7.76mL
Learn more about density at: https://brainly.com/question/6107689
#SPJ1
What is the atomic mass of neon in gram per mole?
Answer:
The atomic mass of Neon atoms is 20 g/mol (Rounded off).
Which of the following statements about lactic acid fermentation is not correct?(a) It produces two ATP molecules for every glucose molecule.(b) It is inefficient compared to aerobic respiration.(c) Oxygen is the final electron acceptor of this pathway.(d) It uses glucose as a substrate.(e) Glycolysis is the only energy-yielding step of this pathway.
Among the following statements about lactic acid fermentation, "Oxygen is the final electron acceptor of this pathway" is not correct. The correct answer is C.
Lactic acid fermentation is an anaerobic process, meaning that it occurs in the absence of oxygen. Instead of oxygen being the final electron acceptor, the electrons are passed to NAD+, which reduces it to NADH. This reduction of NAD+ is an important energy-yielding step of the lactic acid fermentation pathway.
The other statements are correct:
A) It produces two ATP molecules for every glucose molecule.
B) It is inefficient compared to aerobic respiration, which can produce up to 38 ATP molecules from a single glucose molecule.
D) It uses glucose as a substrate.
E) Glycolysis is the only energy-yielding step of this pathway.
Overall, lactic acid fermentation is a less efficient energy-yielding process compared to aerobic respiration, but it can still produce some energy for cells that are in low-oxygen environments.
Learn more about lactic acid fermentation here: https://brainly.com/question/1599790
#SPJ4
Write a general equation for the reaction of a halogen with a metal. (Assume the charge of the metal in ionic compounds is 2+) Express your answer as a chemical equation. Do not identify the phases in your answer. Denote the metal as MM and the halogen as XX.
The general chemical equation for the reaction of a halogen with a metal is M+ X[tex]\rightarrow[/tex] MX₂.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
What is the mole fraction of O₂ in this mixture? 26.1 g of CO2 and 36.6 g of O₂
The mole fraction of a substance in a mixture is the ratio of the number of moles of that substance to the total number of moles of all substances in the mixture.
converting the masses of CO2 and O2 into moles:
CO2: 26.1 g ÷ 44.01 g/mol = 0.59 moles
O2: 36.6 g ÷ 32.00 g/mol = 1.14 moles
adding up the total number of moles:
0.59 moles + 1.14 moles = 1.73 moles
dividing the number of moles of O2 by the total number of moles:
1.14 moles ÷ 1.73 moles = 0.66 or 66%
So the mole fraction of O2 in this mixture is 0.66 or 66%.
What is a mixture?In chemistry, a mixture is a concoction of two or more compounds, each of which maintains its unique chemical identity and properties. Physical separation of the components in a mixture is possible using techniques like distillation, evaporation, or filtering. The qualities of a mixture, as opposed to a chemical compound, rely on the ratios of the constituent parts. Mixtures include things like air, salt water, and gasoline.
A substance made up of two or more separate chemical compounds that are not chemically linked is referred to as a mixture. When two or more substances are physically combined, their identities are maintained, and the mixture takes the shape of solutions, suspensions, or colloids.
To know more about mixture, check out:
https://brainly.com/question/24876385
#SPJ1
How many bonds and lone pairs surrounding the central atom of OF2
Two electron bond pairs combine to generate two O–F bond pairs. Two single electron pairs make up the O-atom. There are three lone electron pairs in each F atom. There are thus eight lone electron pair overall.
What are three electron-related facts?The negatively charged particles known as electrons revolve about the outside of the nucleus. For scientists, it can be challenging to monitor them because of how quickly they spin. The tiniest particles in an atom, you can put 2000 of them out of a proton, they are drawn to the positive ions of the protons.
What is an electron example?The smallest elemental component of an atom, the electron has a negative charge. Quantity of protons.
To know more about electron visit:
https://brainly.com/question/25206522
#SPJ1