Answer:
the correct answer is C
Explanation:
In this exercise we will analyze the situation.
When the person is on the ice, the friction coefficient is very small, if the box is in a place where there is no ice, the coefficient is different, so the friction force on each body is different.
Therefore the acceleration that each body acquires is different.
If we apply the conservation of momentum, each body moves in the opposite direction, but with different speeds.
If we use Newton's third law, the force applied to each body has the same magnitude and opposite direction, which is why the force is of the action and reaction type
Consequently the correct answer is C
A frequently quoted rule of thumb in aircraft design is that wings should produce about 1000 N of lift per square meter of wing. (The fact that a wing has a top and bottom surface does not double its area.) (a) At takeoff the aircraft travels at 63.0 m/s, so that the air speed relative to the bottom of the wing is 63.0 m/s. Given the sea level density of air to be 1.29 kg/m3, how fast (in m/s) must it move over the upper surface to create the ideal lift
Answer:
v₂ = 63.62 m / s
Explanation:
For this exercise in fluid mechanics we will use Bernoulli's equation
P₁ + ρ g v₁² + ρ g y₁ = P₂ + ρ g v₂² + ρ g y₂
where the subscript 1 refers to the inside of the wing and the subscript 2 to the top of the wing.
We will assume that the distance between the two parts is small, so y₁ = y₂
P₁-P₂ = ρ g (v₂² - v₁²)
pressure is defined by
P = F / A
we substitute
ΔF / A = ρ g (v₂² - v₁²)
v₂² = [tex]\frac{\Delta F}{A \ \rho \ g} + v_1^2[/tex]
suppose that the area of the wing is A = 1 m²
we substitute
v₂² = [tex]\frac{1000}{1 \ 1.29 \ 9.8} + 63^2[/tex]
v₂² = 79.10 + 3969
v₂ = √4048.1
v₂ = 63.62 m / s
Falls often cause injuries, so one of the significant aspects of falls is the displacement and motion of a body. It is defined as how far a body moves vertically during the fall. Accordingly, there are three important factors that should be known to compute the kinetic energy (KE) of a falling body. These factors are:
Answer:
We need, mass, gravity and height.
Explanation:
When a body falls freely from a height, its initial velocity is zero, but due to the height it has some potential energy at the top and the kinetic energy is zero.
As it falls, the potential energy is gradually converted in to the kinetic energy so that the total energy of the falling body is conserved.
At the time as the body strikes the ground, the entire potential energy is converted into the kinetic energy.
Potential energy is given by
U = m g h
where, m is the mass, g is the gravity and h is the height,
So, to get the kinetic energy we require mass, gravity and height of the body.
A hot air balloon is moving at a speed of 10 meters/second in the +x direction. The balloonist throws a brass ball with a velocity of -2
meters/second with respect to himself. If the ball lands after 20 seconds, about how far does it land horizontally from the point at which it was
released?
OA 98 meters
OB. 160 meters
OC. 196 meters
OD. 420 meters
Answer:
160 meters
Relative of speed Vr = 10 -2 = 8 m/s (horizontal speed)
20 sec * 8 m/s = 160 m since ball travels 20 sec
Answer:
160 meters
Explanation:
On Ramesh’s13th birthday, his father invited all his friends and their relatives. It was a big party with lots of food and DJs. Ramesh didn’t like the loud sound of DJs and asked his father to play it in a low volume so that their neighbours do not get much disturbed and people at the party can also enjoy the music. Ramesh’s father felt good for his wisdom and did as he said.
→Do you think when loud music is played at a party is acceptable to all the people living in, neighbourhood? Give a reason for your answer
→How can you control noise pollution at your end?
A dipole placed in an electric field will... Try to align along the direction of the field. Try to align antiparallel to the direction of the field. try to align perpendicular to the field. none of these choices.
Answer:
The dipole always tries to align in the direction of electric field so that the net torque is zero.
Explanation:
When a dipole placed in an electric field at any arbitrary angle, it experiences a torque.
Let the dipole moment is p, electric field is E and the angle is A.
The torque is given by
Torque = p E sin A
where, A is the angle between the electric field and dipole moment.
So, the dipole always tries to align in the direction of electric field so that the net torque is zero.
When the Glen Canyon hydroelectric power plant in Arizona is running at capacity, 690 m3m3 of water flows through the dam each second. The water is released 220 mm below the top of the reservoir. If the generators that the dam employs are 90% efficient, what is the maximum possible electric power output?
Answer:
The output electric power is 1338876 W.
Explanation:
Volume, V = 690 cubic meter
height, h = 220 mm = 0.22 m
efficiency = 90 %
time , t = 1 s
Let the mass is m.
m = volume x density
m = 690 x 1000 = 690000 kg
The input power is
P = m g h = 690000 x 9.8 x 0.22 = 1497640 W
The electric power out put is
[tex]P' = 90 % of 1487640\\\\\\P' = 1338876 W[/tex]
____ are the foundation of psychoanalytic theory.
Answer:
an unconscious needs rooted in childhood are the foundation of psychoanalytic theory.
Explanation:
If a duster is left on the top of the chalkboard, it is said to possess kinetic energy.
Answer:
In the above diagram, we move by horizontally with a velocity to the right. But due to gravity the hand falls a distance as we move .
Therefore the time it takes to fall by a distance is given by =.
If = as →∞, then from the laws of motion
=12()22
Therefore for the whole journey from left to right our muscle has to give a beat up at an amount equal to the gravity force. So, the work supplied by the muscle for one trip would be
∫=∫012()22
A man is going to rub the chalk off a blackboard, he is going to choose a way to rub off the chalk in two ways
Starting from the upper left corner of the board and moving horizontally to the right and moving slightly down and then again moving to the right and then when it reaches the left corner and so on
The second way is given in the following: He starts at the top and rubs down and then up again and so on.
He is going to choose the way that is less tiring in his arms. i.e., less work done by his muscles!
Somehow from vague intuitive notion I am inclined to agree that it would be less tiring to rub off the chalk if he moves the duster beginning at the top and rubbing horizontally and gradually decreasing the height when one reach the corners till everything is off.
I tried to calculate the muscle work by considering the following ideas(please correct me if I'm wrong):
The nerves inside our muscle has to fire its signal continuously throughout the entire interval of the process of rubbing and its has to oppose the gravitational force keeping the hand up the air.
When the hand is at the highest point on the blackboard, the muscle has to work against gravity =, as the muscle continues to work against gravity throughout the interval from left to right (the horizontal path of the first case) I couldn't find the total work withstood by our muscle.
A car is travelling at 30m/s and decelerates [with normal car brakes, no trick] at 5m/s/s for 10 s. What is the car's final speed *
A) zero
B) -50m/s
C) -20m/s
D) Not possible to tell
show your full work
Answer:
B. -20 m/s
Explanation:
Given the following data:
Initial velocity = 30 m/s
Acceleration = 5 m/s²
Deceleration = -5 m/s² (deceleration is the negative of acceleration)
Time = 10 seconds
To find the final velocity, we would use the first equation of motion;
[tex] V = U + at[/tex]
Where;
V is the final velocity.
U is the initial velocity.
a is the acceleration.
t is the time measured in seconds.
Substituting into the formula, we have;
[tex] V = 30 + (-5)*10[/tex]
[tex] V = 30 - 50[/tex]
Final velocity, V = -20 m/s
Fiber optic (FO) cables are based upon the concept of total internal reflection (TIR), which is achieved when the FO core and cladding have the same refractive indices.
a. True
b. False
Answer:
False
Explanation:
Though fiber active cable is based on the concept of internal reflection but it is achieved by refractive index which transmit data through fast traveling pulses of light. It has a layer of glass and insulating casing called “cladding,”and this is is wrapped around the central fiber thereby causing light to continuously bounce back from the walls of the Cable.
How does exhailing remove waste from the body? Explain the systems that make this happen‚ using complete sentences
When we exhale, 90% waste material is Carbon Dioxide ( CO2 ) , so, it gets exhaled out in the form of CO2 rich air and it gets removed from the body, therefore our internal body becomes more pure and helps in making our internal temperature constant at a suitable level.
Normal conversation has a sound level of about 60 dB. How many times more intense must a 10,000-Hz sound be compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness
Answer: A 10,000-Hz sound is 10 times more intense as compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness.
Explanation:
The formula used is as follows.
[tex]\beta = 10 dB log (\frac{I}{I_{o}})\\60 = 10 dB log (\frac{I}{I_{o}})[/tex]
[tex]I_{o} = 10^{-12}[/tex] normal threshold
The difference is sound level is as follows.
60 - 60 = 0
Hence,
[tex]0 = 10 dB [log (\frac{I_{f}}{I_{o}}) - log (\frac{I_{i}}{I_{o}})]\\log (\frac{1000}{I_{o}}) = log (\frac{10000 x}{I_{o}})\\log (10^{15}) = log (10^{16}x)\\15 = 16 + log x\\log x = 1\\x = 10[/tex]
This means that 10,000 Hz sound is 10 times more intense.
Thus, we can conclude that a 10,000-Hz sound is 10 times more intense as compared to a 1000-Hz sound to be perceived as equal to 60 phons of loudness.
A physical system is in the state |α> = cos(α)|+> + sin(α)|->. Two observables  = a(|+><+| + |-><-|) + b(|+><-| + |-><+|) e B = a(|+><+| - |-><-|) are measured. Check the uncertainty relationship for these two operators.
Answer:
sorry dear
Explanation:
sorry dear but ur question is hard to understand can u try to edit it so i can tell u the answer?
what is the meanjng of laritude ??
I’m assuming you meant latitude:
The angular distance north or south of the earth's equator, measured in degrees along a meridian, as on a map or globe.
a region based on its distance to the equator uses latitude measurements
basically: up and down , north to south from a certain point
Match each term to the best description
a. Coefficient of friction
b. Friction
c. Kinetic friction
d. Normal
e. Static friction
1. A force that acts parallel to the surface.
2. A force that acts perpendicular to the surface.
3. A force that increases as applied force increases up to some maximum value
4. Magnitude depends on the interacting materials
5. A force that is constant regardless of the applied force
Answer:
Coefficient of friction = Magnitude depends on the interacting materials
Friction = A force that acts parallel to the surface.
kinetic friction = A force that is constant regardless of the applied force
Normal = A force that acts perpendicular to the surface
Static friction = A force that increases as applied force increases up to some maximum value
Explanation:
Let's define all the forces, and then let's solve the problem.
Normal force:
When an object rests on some place (like a book on the table) the force that causes the book to not fall through the table is called the normal force, which is usually equal to the weight of the object and acts perpendicular to the surface where the object is resting.
Friction force.
When an object moves (or tries to move) parallel to a surface, such that the object is in contact with that surface, there appears a force that opposes to the movement (the force is parallel to the surface, and in the opposite direction to the movement).
And this force can be written as:
F = -N*μ
Where μ is the coefficient of friction and N is the normal force.
If the object is not moving yet (but there is applied a force that would move the object) the coefficient is called the coefficient of static friction which increases in a given range, until it can't keep increasing and the object starts to move, while if the object is moving, the coefficient is called the coefficient of kinetic friction and it is constant, where usually the first one is larger than the second, and these coefficients depend on both materials, the surface one and the object one.
Then we have two friction forces, one called the kinetic friction and the other called the static friction.
Then:
Coefficient of friction = Magnitude depends on the interacting materials
Friction = A force that acts parallel to the surface.
kinetic friction = A force that is constant regardless of the applied force
Normal = A force that acts perpendicular to the surface
Static friction = A force that increases as applied force increases up to some maximum value
Magnetic fields can affect... (Check all that apply)
A. ...the motion of electrically charged particles.
B. ...the acceleration of small objects with mass.
C. ...the speed of light near the magnetic field.
D. ...the date we begin daylight savings time.
E. ...the direction compass needles point.
F. ...the electric current in nearby wires.
Answer:
A. the motion of electrically charged particles
A person places a cup of coffee on the roof of his car while he dashes back into the house for a forgotten item. When he returns to the car, he hops in and takes off with the coffee cup still on the roof.
(a) If the coefficient of static friction between the coffee cup and the roof of the car is 0.24, what is the maximum acceleration the car can have without causing the cup to slide?
(b) What is the smallest amount of time in which the person canaccelerate the car from rest to 13 m/s andstill keep the coffee cup on the roof?
Answer:
(a) The acceleration is 2.35 m/s^2.
(b) The time is 5.53 s.
Explanation:
coefficient of friction = 0.24
(a) The acceleration of the car is
[tex]a =\mu g\\\\a = 0.24 \times9.8\\\\a = 2.35 m/s^2[/tex]
(b) initial velocity, u =0, final velocity, v = 13 m/s
Let the time is t.
Use first equation of motion
v = u + a t
13 = 0 + 2.35 x t
t = 5.53 seconds
voltage is 50v and capacitance is 30c what is the charge
Explanation:
voltage is 50v and capacitance is 30c what is the charge
q=1500c
The process of finding the age of fossil is called which answer carbondating,urinumdating ,both of them,none
Answer:
the process of finding the age of fossils is called carbon dating because they use samples of carbon and compare it's characteristics to the samples of carbon from each set time
Which of the following refers to a force acting toward the center of a circular
motion?
A. Centrifugal force
B. Circular force
C. Central force
D. Centripetal force
Answer:
D. Centripetal Force :)
In the mirror diagram shown, which is the normal?
А
В
С
D
Answer:
C
Explanation:
The normal is the line which divides the angle between the incident ray (which is the ray of an object which strikes the mirror) and the reflected ray(the ray which is thrown back as the object hits the mirror surface) into two equal parts. The normal is always perpendicular to the surface. In the description agram Given , the Noa which is the line C, divides the reflected ray (line D) and the incident ray (line A) into two equal parts. The plane surface is line B and the other incident ray (line C) is perpendicular to B
The figure shows three displacement vectors, which are
labeled a, 5, and c. What is the magnitude and direction
of the resultant vector found by adding 5 and ć?
N
4
S
15 m west
āt
2.0 m east
7.0 m east
Ĉ
A. 5.0 m east
B. 5.0 m west
ОО
C. 9.0 m west
0
D. 9.0 m east
Answer:
the correct answer is D
Explanation:
In this exercise, the vectors are in the same west-east direction, so we can assume that the positive direction is east and perform the algebraic sum.
R = δ + ε
where
δ = 2.0 m
ε = 7.0 m
the positive sign indicates that it is heading east
R = 2.0 + 7.0
R = 9.0 m
the direction is east
the correct answer is D
A particle moves along a straight line. Its position at any instant is given by x = 32t− 38t^3/3 where x is in metre and t in second. Find the acceleration of the particle at the instant when particle is at rest.
Answer:
The acceleration of the object is -69.78 m/s²
Explanation:
Given;
postion of the particle:
[tex]x = 32t - 38\frac{t^3}{3} \\\\[/tex]
The velocity of the particle is calculated as the change in the position of the particle with time;
[tex]v = \frac{dx}{dt} = 32 - 38t^2\\\\when \ the \ particle \ is \ at \ rest, \ v = 0\\\\32-38t^2 = 0\\\\38t^2 = 32\\\\t^2 = \frac{32}{38} \\\\t = \sqrt{\frac{32}{38} } \\\\t = 0.918 \ s[/tex]
Acceleration is the change in velocity with time;
[tex]a = \frac{dv}{dt} = -76t\\\\recall , \ t = 0.918 \ s\\\\a = -76(0.918)\\\\a = -69.78 \ m/s^2[/tex]
Given that average speed is distance traveled divided by time, determine the values of m and n when the time it takes a beam of light to get from the Sun to the Earth (in s) is written in scientific notation. Note: the speed of light is approximately 3.0×108 m/s. Enter m and n, separated by commas.
Answer:
[tex]5,2[/tex]
Explanation:
From the question we are told that:
Speed of light [tex]C=3.0×10^8 m/s.[/tex]
Generally the equation for Average Speed is mathematically given by
[tex]V_{avg}=\frac{d}{t}[/tex]
Where
d=Distance between the Earth and the sun
[tex]d=1.5*10^11m[/tex]
Therefore
[tex]t=\frac{d}{V_{avg}}[/tex]
[tex]t=\frac{1.5*10^11m}{3.0×10^8 m/s.}[/tex]
[tex]t=5*10^2s[/tex]
Since m and n is given in the form of
[tex]m*10^n[/tex]
Therefore
[tex]m=5 & n=2[/tex]
[tex]5,2[/tex]
A local FM radio station broadcasts at a frequency of 100.8 MHz. Calculate the energy of the frequency at which it is broadcasting. Energy
Answer:
[tex]E=6.68\times 10^{-26}\ J[/tex]
Explanation:
Given that,
The frequency of FM ratio station, f = 100.8 MHz = 100.8 × 10⁶ Hz
We need to find the energy of the wave. We know that,
Energy, E = hf
Put all the values,
[tex]E=6.63\times 10^{-34}\times 100.8\times 10^6\\\\=6.68\times 10^{-26}\ J[/tex]
So, the energy of the wave is equal to [tex]6.68\times 10^{-26}\ J[/tex].
Three forces are pulling on the same object such that the system is in equilibrium. Their magnitudes are F1 = 2.83 N.F= 3.35 N. and F3 = 3.64 N, and they make angles of 0, = 45.0°, 02 = -63.43 and 03 =164.05° with respect to the x-axis, respectively.
Required:
a. What is the x-component of the force vector F1?
b. What is the y-component of the force vector F1?
(a) 2.001N
(b) 2.001N
Explanation:A sketch of the scenario has been attached to this response.
Since only the force vector F₁ is required, the only force shown in the sketch is F₁.
As shown in the sketch;
The x-component of the force vector F₁ = [tex]F_{x}[/tex]
The y-component of the force vector F₁ = [tex]F_{y}[/tex]
The magnitude of F₁ as given in the question = 2.83N
The angle that the force makes with respect to the x-axis = 45.0°
Using the trigonometric ratio, we see that;
(a) cos 45.0° = [tex]\frac{F_x}{F_1}[/tex]
=> [tex]F_{x}[/tex] = F₁ cos 45.0°
=> [tex]F_{x}[/tex] = 2.83 cos 45.0°
=> [tex]F_{x}[/tex] = 2.83 x 0.7071
=> [tex]F_{x}[/tex] = 2.001N
(b) Also;
sin 45.0° = [tex]\frac{F_y}{F_1}[/tex]
=> [tex]F_{y}[/tex] = F₁ sin 45.0°
=> [tex]F_{y}[/tex] = 2.83 sin 45.0°
=> [tex]F_{y}[/tex] = 2.83 x 0.7071
=> [tex]F_{y}[/tex] = 2.001N
Therefore, the x-component and y-component of the force vector F₁ is 2.001N
The x and y component of vector F1 is mathematically given as
F_x = 2.001N
F_y= 2.001N
What is the x and y component of vector F1?Question Parameters:
Generally, the equation for the x-component is mathematically given as
x=Fsin\theta
Therefore
F_x = F₁ cos 45.0°
F_x = 2.83 x 0.7071
F_x = 2.001N
For y component
x=Fcos\theta
F_y = F₁ sin 45.0
F_y = 2.83 x 0.7071
F_y= 2.001N
Read more about Cartesian
https://brainly.com/question/9410676
A box with mass 25.14 kg is sliding at rest from the top of the slope with height 13.30 m
and slope angle 30 degree, suppose the coefficient of friction of the slope surface is
0.25, find (neglect air resistance,take g=10 m/s^2)
The friction force experienced by the box.
00) The acceleration of the box along the slope.
(1) The time T required for the object to reach the bottom of the slope from the slope top.
Answer:
Explanation:
The first thing we are asked to find is the Force experienced by the box. That is found in the formula:
F - f = ma where F is the force exerted by the box, f is the friction opposing the box, m is the mass, and a is the acceleration (NOT the same as the pull of gravity). But F can be rewritten in terms of the angle of inclination also:
[tex]wsin\theta-f=ma[/tex] where w is the weight of the box. We will use this version of the formula because it will help us answer the second question, which is to solve for a. Filling in:
First we need the weight of the box. Having the mass, we find the weight:
w = mg so
w = 25.14(10) so
w = 251.4 N (I am not paying any attention at all to the sig fig's here, since I noticed no one on this site does!) Now we have the weight. Filling that in:
251.4sin(30) - f = ma Before we go on to fill in for f, let's answer the first question. F = 251.4sin(30) so
F = 125.7 And in order to answer what a is equal to, we find f:
f = μ[tex]F_n[/tex] where Fn is the weight of the object.
f = .25(251.4) so
f = 62.85. Filling everything in now altogether to solve for a, the only missing value:
125.7 - 62.85 = 25.14a and
62.85 = 25.14a so
a = 2.5 m/s/s
Now we have to move on to another set of equations to answer the last part. The last part involves the y-dimension. In this dimension, what we know is that
a = -10 m/s/s
v₀ = 0 (it starts from rest)
Δx = -13.30 m (negative because the box falls this fr below the point fro which it started). Putting all that together in the equation for displacement:
Δx = v₀t + [tex]\frac{1}{2}at^2[/tex] and we are solving for time:
[tex]-13.30=0t+\frac{1}{2}(-10)t^2[/tex] and
[tex]t=\sqrt{\frac{2(-13.30)}{-10} }[/tex] so
t = 1.6 seconds to reach the bottom of the slope from 13.30 m high.
You use a force sensor to measure the weight of an object 10 times, and get the following values: 2.8, 2.6, 2.9, 3.1, 2.4, 2.9, 3.2, 2.5, 2.7, 3.0, where all ten values are in units of N. What is the mean weight of the object, as well as the measurement uncertainty of the weight?
Answer: Mean weight = 2.81 N and Measurement of uncertainty = 0.82 N
Explanation:
Mean = [tex]\dfrac{\text{Sum of observations}}{\text{number of observations}}[/tex]
Mean weight is [tex]($\mu)=\frac{2.8+2.6+2.9+3.1+2.4+2.9+3.2+2.5+2.7+3.0}{10}[/tex]
[tex]=2.81$[/tex]
[tex]$\sum_{i=1}^{10}\left(x_{i}-\mu\right)^{2}=0.61[/tex]
[tex]$\sigma=\sqrt{\frac{1}{N-1} \sum_{i=1}^{10}\left(x_{i}-\mu\right)^{2}}[/tex]
[tex]=\sqrt{\frac{1}{10-1} 0.61}=0.082$[/tex]
Measurement of uncertainty will be [tex]$\sigma=0.082$[/tex]
hence, Weight [tex]$W=2.81 \pm 0.082 N$[/tex]
A hole is made in a square tile of uniform thickness. The diagram shows the tile hanging loosely on a nail. Where is the centre of gravity of the tile?
Answer:
The center of gravity of the tile is at the center of the tile:
Examining 1/2 of the tile, each mass point will have an equal mass point
on the other side of the tile (considering a line thru the center of the tile)
with coordinates opposite and equal of the point being considered.
Each mass point will have an identical mass point on the opposite side of the tile, with coordinates opposite and equal to the point being analyzed, while looking at only half of the tile.
What is center of gravity ?
A hypothetical location where the gravitational force is said to appear to act is the human body's centre of gravity (COG). That is the location where the entire body's bulk appears to be concentrated[2]. The COG need not be located inside the actual boundaries of an object or a person because it is a hypothetical point. Imagine the thing balanced on one finger to get an idea of its COG (there are objective measurements).
The COG is positioned anatomically so that it is about anterior to the second sacral vertebra. The specific placement of the COG, however, continually shifts with each new posture of the torso and limbs since humans do not remain stable in the anatomical position. The dimensions of the body
The center of the gravity is at half of the length of tile.
To know more about Center of gravity :
https://brainly.com/question/20662235
#SPJ2.
A woman stands on a bathroom scale in a motionless elevator. When the elevator begins to move, the scale briefly reads only 0.64 of her regular weight. Calculate the magnitude of the acceleration of the elevator.
Answer:
The downwards acceleration is 3.53 m/s2.
Explanation:
Let the true weight is m g.
The reading of the balance, R = 0.64 mg
Let the acceleration is a.
As the apparent weight is less than the true weight so the elevator goes down wards with some acceleration.
Use Newton's second law
m g - R = m a
m g - 0.64 m g = m a
0.36 g = a
a = 3.53 m/s2