Answer:
I think its 1.72 (:
Explanation:
pouring cold water in your hot coffee is
conduction
convection
radiation
Pouring cold water into your hot coffee is convection. Therefore, option B is correct.
What is convection?Convection can be explained as the transfer of heat from one place to another because of the movement of fluid. Convective heat transfer can be defined as the combined processes of conduction and advection.
Gases as well as liquids are not good conductors of heat under normal pressure and temperature conditions, but they can easily transfer heat from one region to another region.
Convection takes place through diffusion but does not take place in solids substances, as there is no movement of constituent particles takes place. The diffusion of heat energy that occurs in solids is called thermal conduction.
Heat energy transfer that takes place between a surface and a liquid when they come in contact with the surface is called convection heat transfer. Therefore, heat transfer takes place through convection when pouring cold water into hot coffee.
Learn more about convection, here:
brainly.com/question/4138428
#SPJ2
write 0.006 in exponential form
[tex]\huge\pink{Answer}[/tex]
0.0006 in scientific notation is 6 × 10-4
Step by step Explanation:All numbers in scientific notation or standard form are written in the form
m × 10n, where m is a number between 1 and 10 ( 1 ≤ |m| < 10 ) and the exponent n is a positive or negative integer.
To convert 0.0006 into scientific notation, follow these steps:
Move the decimal 4 times to right in the number so that the resulting number, m = 6, is greater than or equal to 1 but less than 10
Since we moved the decimal to the right the exponent n is negative
n = -4
Write in the scientific notation form m × 10n
= 6 × 10-4
Therefore,
6 × 10-4 is the scientific notation form of 0.0006 number and 6e-4 is the scientific e-notation form for 0.0006
HOPE IT HELPS ☺️What tool do scientists use to classify animals?
Scientists use a two-name system called a Binomial Naming System. Scientists name animals and plants using the system that describes the genus and species of the organism. The first word is the genus and the second is the species.
pleasee help asap pleasee
Answer:
b.) 100 meters c.) 6 seconds d.) 16.6 e.) 16.6m/s
Explanation:
what does the o in chemistry mean?
Answer:
oxygen
Explanation:
periodic table
Describe the porosity and permeability of Antarctic soil.
Answer:
Explanation: Geography · College. +5 pts ... Answer. 1.9/5. 16. Girly1004. Ambitious. 1 answer. 4 people helped ... are places that show evidence of a massive ice sheet that existed around 250 million years ago.
You were tasked to check if the liquid sample you have is a substance or a
mixture. Which among these tests is the BEST way to do so?l.color comparizon
lltaste comparizon
III. Boiling Test
IV. Melting Test
a.I, II, III and IV. b.l,II, and III only
c. I and Ill only
d. I, II, and IV only
Answer:
The correct answer is - option C. I and Ill only.
Explanation:
One never tastes a unknown chemical in chemistry lab especialy a liquid that can be hazardous. Melting test is for solid as a solution is already a liquid state so melting test can not be perform on it.
The two test can be perform on given sample that are color comparison and boiling test to check if it is substance or a mixture. A misture is prepared from mixing different kind of compounds that can give different kind of color while a particular substance give a uniform color always or remain colorless.
Boiling test can be helpful in distinguish a mixture from a substance as a particular sybstance always give a particular boiling point but mixture can be varry and depend of the coponents mixed together
Help pls 100 points and brainiest
Answer:
See below
Explanation:
INdependent = amount of med given
Dependent = recovery time <==== this 'depends' on the amount of medicine given
Helppppp pleaseee fasst What branch of mathematics' principles were the Islamic artists apparently using?
a. Calculus
C. Trigonometry
b. Quasicrystalline geometry
d. Algebra
Please select the best answer from the choices provided
Answer:
its b.
Explanation:
what is the ion name of Zinc?
Answer:PubChem CID: 32051
Explanation:Molecular Formula: Zn+2
Synonyms:
zinc ion
zinc(2+)
Zinc cation
Zinc, ion (Zn2+)
Zn2+
More...
Molecular Weight:
65.4 g/mol
Dates:
Modify:
2020-10-20
Create:
2005-06-08
which layer of Earth creates a magnetic field and shields us from the Sun's destructive solar wind?
The outer core is the layer of Earth creates a magnetic field and shields us from the Sun's destructive solar wind.
It is called a magnetic field to a space in which magnetic phenomena take place due to the influence of a body with properties of electric charges.
The earth's magnetic field is mainly produced by the electric currents that occur in the outer core, liquid in nature, which is composed of highly conductive cast iron.
As the center of the Earth cools, part of the iron contained in the fluid outer core solidifies and becomes part of the inner core.
The outer core changes its chemical composition and becomes less dense, generating convective currents.
This process, together with the Coriolis effect (product of the Earth's rotation) generates strong helical convection currents that align with the axis of rotation.
The Earth is mostly protected from the solar wind, a stream of energetic charged particles emanating from the Sun, by its magnetic field, which deflects most of the charged particles.
These particles would destroy the ozone layer, which protects the Earth from harmful ultraviolet rays.
Therefore, we can conclude that the outer core is the layer of Earth creates a magnetic field and shields us from the Sun's destructive solar wind.
Learn more here: https://brainly.com/question/1597144
convert each into decimal form.
a) 1.56× 10^3
b) 0.56×10-4
Answer: A = 1560
B = 1.6
Explanation: brainlest please
What is the mass number of neon (Ne)?
A. 20
B. 18
C. 10
D. 2
Answer:
A
Explanation:
it is round up to 20
Answer:
20 is the answer (A)
Explanation:
Neon/Atomic mass
20.1797 u
this is approximately 20 so 20 is the answer (A)
hope this helps!
what is it called when you apply science and mathematics to real life problems
Answer:
I think S.T.E.M but i'm not 100% sure
Explanation:
the following chemical equation is not balanced; which element is not following following the law of mass conservation?
C02+CL2 = O2+CCL4
Answer:
C02+2CL2 = O2+CCL4
Explanation:
the co2 gave its carbon atom to the CL2 + CCL4
An unknown compound containing only C and H was burnt, yielding 10.2 g of CO2 and 6.3 g of H2O. With a molecular weight of about 30, what is the molecular formula?
Answer:
[tex]C_2H_6[/tex]
Explanation:
Hello.
In this case, we can see that the mass of carbon of the unknown compound comes from the yielded mass of carbon dioxide, thus, we compute the moles of carbon as follows:
[tex]m_C=10.2gCO_2*\frac{1molCO_2}{44gCO_2}*\frac{1mol C}{1molCO_2}=0.232 molC[/tex]
Moreover, the mass of hydrogen comes from the yielded water, therefore we can also compute the moles of water:
[tex]m_H=6.3gH_2O*\frac{1molH_2O}{18gH_2O}*\frac{2molH_2}{1molH_2O} =0.7molH[/tex]
Then, to find the subscripts in the empirical formula, we divide by the moles of carbon as the smallest:
[tex]C:\frac{0.232}{0.232}=1\\ \\H:\frac{0.7}{0.232}=3[/tex]
Whose molar mass is:
[tex]M_{CH_3}=12+1*3=15g/mol[/tex]
Thus, the ratio of the molecular formula to the empirical formula is:
[tex]\frac{30}{15}=2[/tex]
Therefore, the molecular formula is twice the empirical formula:
[tex]C_2H_6[/tex]
Which is actually ethane.
Regards.
Problem PageQuestion Nitric acid and nitrogen monoxide react to form nitrogen dioxide and water, like this: (aq)(g)(g)(l) At a certain temperature, a chemist finds that a reaction vessel containing a mixture of nitric acid, nitrogen monoxide, nitrogen dioxide, and water at equilibrium has the following composition: compound amount Calculate the value of the equilibrium constant for this reaction. Round your answer to significant digits. Clears your work. Undoes your last action. Provides information about entering answers.
Answer:
3.4
Explanation:
Nitric acid and nitrogen monoxide react to form nitrogen dioxide and water, like this: 2 HNO₃(aq) + NO(g) ⇄ 3 NO₂(g) + H₂O(l)
At a certain temperature, a chemist finds that a 9.5L reaction vessel containing a mixture of nitric acid, nitrogen monoxide, nitrogen dioxide, and water at equilibrium has the following composition:
compound amount
HNO₃ 15.5g
NO 16.6g
NO₂ 22.5g
H₂O 189.0g
Calculate the value of the equilibrium constant Kc for this reaction. Round your answer to 2 significant digits.
Step 1: Write the balanced equation.
2 HNO₃(aq) + NO(g) ⇄ 3 NO₂(g) + H₂O(l)
Step 2: Calculate the molar concentration of the species at equilibrium
We will use the following expression.
M = mass of solute / molar mass of solute × liters of solution
[HNO₃] = 15.5g / 63.01 g/mol × 9.5 L = 0.026 M
[NO] = 16.6g / 30.01 g/mol × 9.5 L = 0.058 M
[NO₂] = 22.5g / 46.01 g/mol × 9.5 L = 0.051 M
We do not calculate the molarity of water because it is a pure liquid and will not be included in the equilibrium constant.
Step 3: Calculate the equilibrium constant (Kc)
Kc = [NO₂]³/[HNO₃]²×[NO]
Kc = 0.051³/0.026²×0.058
Kc = 3.4
Why can't silver have a mass number of 107.87?
Answer:
Silver does have a mass of 107.87.
Explanation:
What is the main limitation of flame tests? Check all that apply.
1. It takes a long time to perform
2.Inability to determine the identity of mixtures
3.Some metals have similar flame test results
4.Color is subjective
Answer:
All of the above are correct.
Explanation:
The Flame Test Shortcomings
Small quantities of most molecules can not be measured by the examination.
The signal's intensity ranges from one test to the next.
The test findings are impaired by impurities or toxins.
The test is not capable of differentiating between all components.
please help
I need I badly or I'm going to fail
Answer:
Its B
Explanation:
When testing with the human body i think
g The difference between an ionic bond and a covalent bond is that Select one: a. ionic bonds commonly occur between two metals and covalent bonds occur between metals and nonmetals. be. ionic bonds are between atoms that can share electrons; covalent bonds are between atoms that will donate/accept electrons. c. covalent bonds come about because of a sharing of electrons; ionic bonds do not. d. ionic bonds are between smaller atoms; covalent bonds are between large atoms.
Answer:
C) Covalent bonds come about because of a sharing of electrons; ionic bonds do not.
Explanation:
There are two main types of chemical bonds- covalent and ionic/electrovalent bonds.
Ionic bond: Ionic or electrovalent bonds are characterized by the transfer of electrons from electropositive atoms (metals) to electronegative atoms (non-metals). The metal atoms after donating their electrons become positively charged ions (cations) while the non-metal atoms after accepting electrons become negatively charged ions (anions). Strong electrostatic forces of attraction constitutes ionic bonds.
Covalent bond: Covalent bonds are formed by the sharing of electrons by the atoms involved in the bond; usually between atoms of comparable electronegativities or atoms of the same element. The shared electrons are contributed by each of the atoms involved in the bonding or may be contributed by only one of the atoms. In covalent bonding, molecules rather than ions are formed.
J.J. Thomson discovered the electron in 1897. In 1904, he proposed a model of an atom, describing that there was an equal distribution of negative and positive charges throughout the atom. In 1909, Ernest Rutherford tested J.J. Thomson’s model by shooting positive particles at gold foil. Based on Thomson's model, it was predicted that the particles would fly through the foil with a small amount deflected back. Analyzing the results, Rutherford discovered that more of the particles bounced back than expected. Which of the following best explains how the results of Rutherford’s experiment affected Thomson’s widely-accepted atomic model?
A. Rutherford’s results were invalidated and discarded because Thomson’s model was correct.
B. Rutherford’s results supported parts of Thomson's model, but also provided new data and interpretations.
C. Rutherford’s results suggested that the model proposed by Thomson was based on false research and required a change in his hypothesis.
D. Rutherford’s results supported Thomson’s model that there was a negative core surrounded by positive charges and caused a modification in the overall atomic theory.
Rutherford's results declined the results of Thomson's model, the correct option is C.
What are Atomic models?Atomic Models are the scientific theories proposed to determine the structure of an atom.
There are mainly 5 theories proposed for atomic models.
1. John Dalton's Atomic Model: An atom is the basic building block of all physical entities in the universe.
2. Plum Pudding Model, created by J.J. Thomson, uses the comparison of plum pudding, where the positive charge is uniformly dispersed throughout and the negative charge is randomly sprinkled on top, to explain how subatomic particles are structured.
3. Rutherford's model: proved the presence of a nucleus.
4.Niel Bohr's model: Arrangement of electrons in shells.
5. Erwin Schrodinger's model is also called as Quantum Model.
In J.J. Thomson's model, the equal distribution of positive and negative charges is proposed while,
Rutherford's theory declines this arrangement and proposes that the positively charged nucleus occupies a very small part and there is empty space in the atom.
So, Rutherford’s results suggested that the model proposed by Thomson was based on false research and required.
To know more about Atomic Models
https://brainly.com/question/9145431
#SPJ6
With regard to Lewis structures, what is the importance of the octet rule?A. Orbitals fill one electron at a time.
B. All elements contain eight electrons at all times.
C. Elements with less than eight valence electrons are reactive.
D. No more than two electrons can share an orbital.
Which carries information by copying an original sound?
Answer:
frequency
Explanation:
i just did it
Answer:
A: analog signal
Explanation:
on edge2021!
state and explain grahms law of diffusion
Answer:
Graham's law of effusion was formulated by Scottish physical chemist Thomas Graham in 1848. Graham found experimentally that the rate of effusion of a gas is inversely proportional to the square root of the mass of its particles. This formula can be written as: , where: Rate₁ is the rate of effusion for the first gas.
Explanation:
r1 = rate of effusion for gas 1
r2 = rate of effusion for gas 2
M1 = molar mass of gas 1
M2 = molar mass of gas 2
Which graph represents a function?
Answer:
I need to se the options
What is the smallest particle of matter called?
Answer:
an atom and inside the atom are protons electrons and nuetrons
Explanation:
Answer:
An Atom
Explanation:
An atom is the most smallest particle of matter, you can't see with the most powerful telescopes or microscopes
9.81g of manganese(iv) oxide react with 6.54 g of aluminum to make 5.65g of aluminum oxide and an unknown mass of manganese determine the limiting reagent theorectical yield and percent yielf
Answer:
MnO₂ is limiting reactant
7.68g is theoretical yield
73.6% is percent yield
Explanation:
The reaction of the question is:
3MnO₂ + 4Al → 2Al₂O₃ + 3Mn
To determine limiting reactant we need to convert each reactant to moles and, based on the chemical equation determine the moles you need of the other reactant for a complete reaction:
Moles MnO₂ -Molar mass: 86.937g/mol-:
9.81g * (1mol / 86.937g) = 0.113 moles
Moles Al -Molar mass: 26.98g/mol-:
6.54g * (1mol / 26.98g) = 0.242 moles
For a complete reaction of 0.242 moles of Aluminium you will require:
0.242mol Al * (3MnO₂ / 4Al) = 0.182 moles of MnO₂
As there are just 0.113moles of MnO₂, MnO₂ is limiting reactant
Now, with limiting reactant we need to determine theoretical moles and grams of Al₂O₃ produced:
Moles:
0.113 moles MnO₂ * (2Al₂O₃ / 3MnO₂) = 0.0753 moles Al₂O₃
Grams (Molar mass: 101.96g/mol):
0.0753 moles Al₂O₃ * (101.96g/mol) = 7.68g is theoretical yield
Percent yield is 100 times the ratio between actual yield (5.65g) and theoretical yield:
5.65g/7.68g * 100 =
73.6%What functional group is present in the following compound?
helppp What function does adding a coefficient in a chemical equation serve?
Coefficients cannot be added or changed without describing different substances.
It tells whether the reactants must be exposed to outside factors to make them react.
It balances the equation, ensuring each side of the reaction has an equal number of atoms.
It describes the physical state of the reactant or product to which it is attached.
Answer: The answer is option C. (It balances the equation, ensuring each side of the reaction has an equal number of atoms.)
Explanation: