Write a program that inputs an integer. If the integer is greater than 100 or between 50 and 75 (inclusive) then output YES. Otherwise, output NO. Your program should use an if-else statement along with && (and) and || (or) relational operators. Examples of numbers that would result in an output of YES: 101, 50, 75, 55, 70, 71, 250 Examples of numbers that would result in an output of NO: 49, 76, 100, 80, 10, −50, 0
Answers
You can use an if-else statement along with && (and) and || (or) relational operators to solve this problem. The code should look something like this:
int num;
scanf("%d", &num);
if (num > 100 || (num >= 50 && num <= 75))
printf("YES");
else
printf("NO");
I show you the same procedure in Python code.
if __name__ == '__main__':
# Define Variable
intger = int()
# Data Entry
while True:
print("Inputs an integer: ", end="")
intger = int(input())
# If-else statement
if intger>100 or intger<=75 and intger>=50:
# Output
print("Si")
else:
print("No")
if intger==0: break
In both code, the if statement evaluates whether the given number is greater than 100 || between 50 and 75 (inclusive). If it is, it prints YES; otherwise, it prints NO. Below is an image of the output screen of the program.
For more information on If-else statement see: https://brainly.com/question/18736215
#SPJ11
Related Questions
by the principle of flory-schulz principle and if the average probability of reactive functional group is 0.985, please calculate
Answers
This outcome is compatible with the lambda-parameterized Poisson distribution's Mw formula.
The use of "average"?To compare different quantities of the same category, averages are utilised. For instance, because there are disparities in the salaries of multiple employees, averages must be used to calculate the per-employee salary of a firm.
(a) The Poisson distribution can be used to determine the probability function P(x) as a function of the degree of polymerization x:
P(x) = (lambda^x / x!) * exp(-lambda)
where lambda = -ln(1 - 0.985) = 4.199 is the average number of reactive functional groups per polymer chain. The probability of finding a chain with DP = x is proportional to P(x). The plot of P(x) as a function of x is shown below:
P(x) plot
(b) The weighing function w(x) for calculating Mw can be calculated as follows:
w(x) = x * P(x) / sum{k * P(k), k=0 to infinity}
where P(x) is the probability function calculated in part (a). The weighing function w(x) represents the contribution of chains with DP = x to the Mw calculation. The plot of w(x) as a function of x is shown below:
w(x) plot
(c) The number-average molecular weight Mn can be calculated by integrating over the DP distribution:
Mn = sum{k * w(k), k=0 to infinity}
We can approximate the sum as an integral:
Mn = integral{k * w(k) dk, k=0 to infinity}
Substituting w(x) from part (b), we get:
Mn = integral{x * P(x) dx / sum{k * P(k), k=0 to infinity}, x=0 to infinity}
sum{k * P(k), k=0 to infinity} = exp(lambda) = exp(-ln(1 - 0.985)) = 21.832
Substituting this value, we get:
Mn = integral{x * P(x) dx / 21.832, x=0 to infinity}
Performing the integration, we get:
Mn = lambda / (1 - exp(-lambda)) = 4.407
(d) The weight-averaged molecular weight Mw can be calculated by integrating over the DP distribution weighted by the number of polymer chains with that DP:
Mw = sum{M(x) * w(x), x=0 to infinity}
We can approximate the sum as an integral:
Mw = integral{M(x) * w(x) dx, x=0 to infinity}
Substituting M(x) = x * Mn, we get:
Mw = Mn * integral{x^2 * P(x) dx / sum{k * P(k), k=0 to infinity}, x=0 to infinity}
Substituting w(x) from part (b), we get:
Mw = Mn * integral{x^2 * P(x) dx / sum{k * x * P(k), k=0 to infinity}, x=0 to infinity}
sum{k * x * P(k), k=0 to infinity} = lambda^2
Substituting this value, we get:
Mw = Mn * integral{x^2 * P(x) dx / lambda^2, x=0 to infinity}
Performing the integration, we get:
Mw = Mn * (1 + lambda) / (1 - exp(-lambda)) = 13.863
To know more about Mw formula visit:-
https://brainly.com/question/12937076
#SPJ4
Question:
By the principle of Flory-Schulz principle and if the average probability of reactive functional group is 0.985, please calculate (a) Plot the probability function, P(x) as a function of degree of polymerization, x
(b) Plot the weighing function, w(x) for calculating M as a function of degree of polymerization, x.
(c) Calculate M through integration and compared with the formula you learned in the class.
(d) Calculate MW through integration and compared with the formula you learned in the class. Also which M w has the highest population in the weight fraction?
the indicator used in this experiment is calmagite, and to ensure we can monitor the color change clearly, the ph of the calcium solution needs to be adjusted to ___ using a ph buffer solution.In this experiment, when Calmagite binds to the metal ions in the water sample, the solution before EDTA titration will exhibit a color of ____ and the solution after the EDTA titration will exhibit a color of ___.
Answers
The indicator Calmagite is frequently used in complexometric titration with EDTA to determine the calcium level of water.
What colour is the indication for calmagite?When calmagite is coupled to an ion, it changes colour like other metal ion indicators do. When calmagite is coupled to a metal ion, it will be wine red; otherwise, it can be blue, red, or orange. A more powerful metal binding agent called EDTA is frequently used with calmagite.
A calmagite indicator is what?In analytical chemistry, calmagite is frequently employed as an indicator for titrating calcium or magnesium with ethylenediaminetetraacetic acid (EDTA). It is helpful for figuring out how much magnesium is in biological materials.
To know more about Calmagite visit:-
https://brainly.com/question/30559544
#SPJ4
The MSP430F20x is a microcontroller with 64 KiB of address space divided between code memory (flash), RAM memory, and input/output peripherals. It has 2,048 Bytes of RAM memory starting at the address 0x0200, and 256 Bytes of address space reserved for special purpose registers and 8-bit input/output peripherals (starting at the address 0x0000) followed by 256 Bytes reserved for 16-bit input/output peripherals. The flash memory of 16 KiB resides at the top of address space (highest addresses in the address space).C. Determine the address map by filling in the following table.Address Byte Address (hexadecimal) Sections in address spaceLast Flash Address Flash MemoryFirst Flash Address Flash MemoryLast RAM address RAM MemoryFirst RAM address RAM MemoryLast I/O address (16-bit per.) I/O address spaceFirst I/O address (16-bit per.) Last I/O address (8-bit per.) I/O address spaceFirst I/O address (8-bit per.) What is the maximum stack size in the MSP430Fx described above? What should be the initial value of SP? Using RTL notation, describe operations carried out to execute the following two instructions: PUSH R9 and POP R9.Stack size: __________________BytesInitial stack pointer: SP =PUSH R9:POP R9:
Answers
Address Byte Address (hexadecimal) Sections in address space
Last Flash Address FFFF Flash Memory
First Flash Address C000 Flash Memory
Last RAM address 03FF RAM Memory
First RAM address 0200 RAM Memory
Last I/O address (16-bit per.) 01FF I/O address space
First I/O address (16-bit per.) 0100 I/O address space
Last I/O address (8-bit per.) 00FF I/O address space
First I/O address (8-bit per.) 0000 I/O address space
Maximum stack size is 1792 bytes.
Initial value of SP should be 0x025E.
PUSH R9: SP is decremented by 2, and the value in R9 is stored at the new SP address.
POP R9: The value at the current SP address is loaded into R9, and SP is incremented by 2.
How much RAM memory is available in the MSP430F20x, and what is its starting address?The MSP430F20x microcontroller has 2,048 Bytes of RAM memory available, starting at the address 0x0200 in the address space. This RAM memory can be used for storing program variables, data, and stack operations. The RAM memory is divided into multiple segments, including general-purpose registers, stack memory, and system registers. The starting address of the RAM memory is important to know when programming the microcontroller and accessing its memory.
To know more about Microcontroller visit:
https://brainly.com/question/15054995
#SPJ4
a mineral, as geologists understand the term, is a naturally occurring solid substance with a definable chemical composition and
Answers
A crystalline structure is a naturally occurring solid substance with a definable chemical.
What do the term mineralogists and geologists refers?
Mineralogists and geologists use the term "mineral" to refer to a naturally occurring inorganic substance with a specific chemical composition and a well-defined crystal structure.
Minerals are the building blocks of rocks and make up the majority of the Earth's crust.
Some examples of minerals include quartz, feldspar, mica, halite, calcite, and magnetite.
Minerals can form through a variety of geological processes, including cooling and solidification of molten rock, precipitation from mineral-rich fluids, and crystallization from magmatic or hydrothermal solutions.
Mineral properties, such as color, luster, and hardness, are used to identify and classify minerals.
The chemical composition and crystal structure of minerals are determined through various analytical techniques, such as X-ray diffraction, spectroscopy, and electron microscopy.
To know more about geology , visit: https://brainly.com/question/20370520
#SPJ4
Find the center of mass for a quarter of a uniform sphere in terms of the outside radius of the sphere, R.Express your answers in terms of R separated by commas.Learning Goal: To be able to find the centroid, center of mass, and center of gravity for lengths, areas, and volumes of simple, uniform objects. The centroid of an object is the object's geometric center. For objects of uniform composition, the centroid is also the object's center of mass.
Answers
Therefore, the coordinates of a quarter ring's center of mass in the first quadrant are (XCM,YCM) =(2R,2R).
Always consider a little mass when determining the center of mass. While the center of mass of a solid sphere is inside its body, it is outside the body in the case of a hollow sphere. By multiplying the system you're looking for the center of mass between by their positions, the center of mass can be computed. After that, add them all up and divide the result by the total of all the individual masses. Therefore, the coordinates of a quarter ring's center of mass in the first quadrant are (XCM,YCM)=(2R,2R).
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
For the memory shown in Figure 3.42:
A) What is the address space?
B) What is the addressability?
C) What is the data at address 2?
Answers
A user or independently executing program's address space is the set of virtual addresses that the operating system assigns to them. Contiguous virtual addresses are accessible for executing commands in this area.
With an example, define address space?The total amount of memory that a computer may access is known as the address space. The phrase could be used to describe virtual or physical memory (disk/SSD or RAM chips). Taking 4GB of physical memory as an example, a 32-bit computer can address it.
What is a process's address space?The range of virtual memory locations that a process is permitted to use is known as its virtual address space. Each process has a unique address space that is private and cannot be shared with any other processes.
To know more about virtual addresses visit :-
https://brainly.com/question/29646648
#SPJ4
A primitive barcode system is used to identify products sold in a small trinkets store. The system used is a 3 x 3 grid where each cell in the grid is either BLACK or WHITE. If each product must be identified by a unique barcode, how many products can the store accommodate with this barcode system? Give the exact numerical answer
Answers
The precise numerical response is 512. In the 3x3 grid, each cell can be either BLACK or WHITE. As a result, there are 512 different ways that black and white cells could be combined.
Which barcode is used on products?One of the most popular types of barcodes is UPC (Universal Product Codes). This barcode is utilised to label retail merchandise. In the US, it is present in almost every sale item in the market and in every grocery shop.
How do barcodes on products operate?A barcode is made up of many lines that are black and white and each one has a number. When a product is delivered to a store, the barcode is scanned into the computer system, where it is compared to a pricing for that specific item.
To know more about barcode visit:-
https://brainly.com/question/29493112
#SPJ4
if atmospheric pressure is 100 kpa, calculate the absolute and gauge pressure exerted on a diver 20 m below the surface of the sea in kpa. assume a specific gravity of 1.03 for seawater.
Answers
Absolute pressure = gauge pressure + atmospheric pressure
Gauge pressure = specific gravity x density of water x depth
Density of water = 1000 kg/m^3 for fresh water, 1030 kg/m^3 for seawater
Using these equations, the gauge pressure exerted on the diver 20 m below the surface of the sea is:
Gauge pressure = 1.03 x 1030 kg/m^3 x 20 m x 9.81 m/s^2 = 203 kPa
Adding this to the atmospheric pressure of 100 kPa, the absolute pressure exerted on the diver is:
Absolute pressure = 203 kPa + 100 kPa = 303 kPa
What is the formula for calculating absolute pressure?
The formula for calculating absolute pressure is Pabsolute = Pgauge + Patm, where Pabsolute is the total pressure acting on an object, Pgauge is the pressure measured by a gauge or instrument, and Patm is the atmospheric pressure at the location. In other words, absolute pressure is the sum of gauge pressure and atmospheric pressure. This formula is commonly used in fluid mechanics and thermodynamics to measure and calculate pressure in various systems, including liquids and gases. Understanding the difference between absolute and gauge pressure is important in many applications, such as diving, aviation, and industrial processes.
To know more about pressure visit:
https://brainly.com/question/12971272
#SPJ4
Which one of the following is true about red buoys under the U.S. Aids to Navigation System?
A. Some are known as "nun" buoys
B. They are labeled with odd numbers
C. If it is lighted, the light color is green
D. Some are known as "can" buoys
Answers
According to the lateral system, the green, odd-numbered marks are placed on the port side of a channel while the red, even-numbered marks can be found on the starboard side. The buoy numbers rise as a ship moves upstream.
What do the inland rules say regarding red buoys?Black and white stripes on obstruction marks in inland waters indicate to ships where undersea dangers are. When flowing upstream, a green can buoy indicates passing to the right, and a red nun buoy indicates passing to the left.
What do the colours on the buoy mean?Typically, buoys are painted red, green, or a combination of the two colours. On buoys, the colours yellow, blue, white, and black are also permitted. A green buoy directs passing boaters.
To know more about buoy visit:-
https://brainly.com/question/3778764
#SPJ4
A reasonable abstraction for a car includes: a. car color b. number of miles driven c. an engine d. driving
Answers
D. Driving
Driving is an action or behavior associated with a car, as it involves operating or using the car to travel from one place to another. It is an essential aspect of the car's purpose and function.
What is Engine?An engine is a machine designed to convert fuel into mechanical energy that can be used to power other machines or devices. In the context of automobiles, an engine is the primary source of power that drives the vehicle. It typically operates by burning fuel in a combustion chamber to generate high-pressure gases that drive a piston, which in turn rotates a crankshaft that ultimately powers the car's wheels.
Car color and number of miles driven are characteristics or properties of a car, while an engine is a component that helps to power the car. Driving, on the other hand, is an action or behavior associated with a car, as it refers to the act of operating or using the car to travel from one place to another. Therefore, driving is a reasonable abstraction for a car, as it captures an essential aspect of the car's purpose and function.
To know more about mechanical energy visit: brainly.com/question/29509191
#SPJ4
arrange all open workbooks in a single window so they overlap in a staggered diagonal pattern.
Answers
Unfortunately, Excel does not have a built-in feature to open all workbooks in a single window with a diagonal pattern. However, you can manually arrange them to achieve a similar effect.
How you can do it manually?
Open all the workbooks you want to arrange in a diagonal pattern.Right-click on one of the workbook tabs and select "Move or Copy Sheet."In the "Move or Copy" dialog box, select the workbook you want to copy the sheet to. If you want to copy the sheet to a new workbook, select "New Book."Click "OK."Repeat steps 2-4 for each of the workbooks you want to arrange.Once you have copied all the sheets to a single workbook, click on the "View" tab.In the "Window" group, click "Arrange All."In the "Arrange Windows" dialog box, select "Tiled."Click "OK."To learn more about Excel, visit: https://brainly.com/question/29815955
#SPJ4
Provide the basic provisions and applications of the following legislation
1.1.1. Occupations Health & Safety Act ( Act 85 of 1993)
Answers
The Occupational Health and Safety Act (OHSA) is a South African law that aims to protect employees from occupational hazards in the workplace. The following are the basic provisions and applications of the Act:
Health and Safety Standards: OHSA provides for the establishment of health and safety standards that must be met by employers in order to provide a safe working environment for employees.
Duties of Employers: Employers are required to provide and maintain a safe working environment for their employees, and to take steps to eliminate or control hazards that could lead to injury or illness.
Duties of Employees: Employees are required to take reasonable care for their own health and safety, as well as that of their colleagues.
Health and Safety Representatives: OHSA provides for the appointment of health and safety representatives who are responsible for promoting health and safety in the workplace.
Inspections and Enforcement: OHSA empowers the Department of Labour to conduct inspections of workplaces to ensure compliance with health and safety standards. Employers who fail to comply with OHSA can be prosecuted and fined.
Reporting of Accidents and Incidents: OHSA requires employers to report any accidents or incidents that occur in the workplace that result in injury or illness to employees.
Applications of OHSA:
Workplace Safety: OHSA aims to protect employees from occupational hazards in the workplace by promoting a culture of safety and ensuring that employers comply with health and safety standards.
Employee Health: OHSA promotes the health and wellbeing of employees by requiring employers to provide a safe working environment that is free from hazards.
Productivity: OHSA can improve productivity by reducing the number of accidents and incidents in the workplace, which can lead to reduced absenteeism and downtime.
Legal Compliance: OHSA is a legal requirement for all employers in South Africa, and failure to comply can result in fines, penalties, and legal action.
Which of the following occurs when a party fails to perform certain express or implied obligations, which impairs or destroys the essence of the contract?
Group of answer choices
material breach of contract
fraud
misreprentation
bribery
Answers
A material breach of contract occurs when one party fails to fulfill their obligations, thus impairing the contract.
A material breach of contract occurs when one party fails to fulfill their obligations as outlined in the contract, either express or implied, thus impairing or destroying the essence of the contract.
This could include failing to provide goods or services as agreed upon in the contract, or failing to pay any fees or payments stipulated in the contract. Depending on the severity of the breach, the non-breaching party may be able to terminate the contract and seek damages from the breaching party.
In some cases, the non-breaching party may be able to continue with the contract after being compensated for any losses incurred from the breach.
Learn more about material breach: https://brainly.com/question/20713734
#SPJ4
when survivability is required for an emergency voice/alarm communications system, which of the following circuits are required to meet the survivability requirements?
Answers
The correct answer is Susceptibility, Vulnerability, and Recoverability should be used as the three objective criteria for measuring system survivability.
To address society's evolving needs for fire detection, signaling, and emergency communications, NFPA 72 offers the most recent safety regulations. In conclusion, NFPA 72 defines survivability as the capacity of the fire alarm circuit to continue operating effectively even when it is being attacked by fire.According to NFPA 72, the fire alarm system might be the typical system of initiating and notification devices. A voice/alarm emergency communication system must be built in compliance with NFPA 72 Chapter 24 for any Group 3 occupancy of 100 or more.
To learn more about Susceptibility click on the link below:
brainly.com/question/29418846
#SPJ4
True/False: Although C++ provides ample library functions to handle numeric values, we must write all of our own functions to manipulate character values.
Answers
False. C++ provides ample library functions to handle both numeric and character values, and programmers can choose to use either built-in functions or custom functions for their specific needs. The standard library includes functions for working with characters, strings, and other common data types.
What is the difference between numeric values and character values in C++ programming?Numeric values are values that represent numbers, such as integers or floating-point numbers, in C++ programming. They are used for mathematical computations, comparisons, and other operations that require numerical data. On the other hand, character values are values that represent characters or strings of text, such as letters, numbers, or symbols. They are used for text processing, input/output operations, and other tasks that involve manipulating or displaying textual data. Unlike numeric values, character values cannot be directly used in mathematical computations or comparisons, and must be converted to their corresponding ASCII codes or other numerical representations in order to be processed by the computer.
To know more about Programmers visit:
https://brainly.com/question/13956629
#SPJ4
which of the following terms refers to the measurement of the raised edges of a gun barrel? a. pitch b. groove design c. width of land d. groove depth
Answers
The measurement of the elevated rims of the rifle barrel represents the width of the land. Groove depth is a gauge for how deep grooves are. Each groove's pitch, angle, and diameter are all related.
What does the upper part of the rifle barrel represent?Rifling, spiral imprints found inside handgun and rifle barrels, is a common term. Rifling is divided between lands, which are raised areas, and grooves, which are recessed portions.
How is a gun's length determined?According to the ATF, "the process for determining barrel length is to measure from the closed bolt to furthermost end of the barrel," and "the overall length of a firearm is the distance between the muzzle of the barrel and rearmost component of the weapon measured on a line parallel to axis."
To know more about rifle barrel visit :-
https://brainly.com/question/11965028
#SPJ4
Voltage has the same meaning as
a)Current.
b)None of the given answers.
c)Electricity.
d)Power.
Answers
Answer:
Voltage, also known as electric pressure, electric tension, or (electric) potential difference
Explanation:
volteg , is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to move a test charge between the two points.
10) a surface current density js is one that flows on a surface, corresponding to a surface charge density in motion on the surface. the units are [a/m]. the 2-d form of the charge-velocity equation states that the surface current density vector is given by
Answers
There are [A/m] units. The surface current density vector is denoted by J = P.V. in the charge-velocity equation's 2-D form.
What is the density of the surface current?Quantity & Surface Magnetostatics | Current Density Density of Surface Current The Surface Current Density, K, is a term used to describe how Charge moves over a surface. Definition: K stands for the current per unit of flow-perpendicular breadth.
What connection exists between liquid density and surface tension?The project came to the conclusion that surface tension varies with each liquid depending on its composition. It was evident after taking note of each liquid's density that surface tension increased with increasing density.
To know more about current density visit:-
https://brainly.com/question/21852090
#SPJ4
a common form of social engineering is someone pretending to be an authorized user or administrator in an attempt to gain illicit access to protected data. True or False?
Answers
True. That is a common form of social engineering known as "impersonation" or "pretending to be an authority."
What is social engineering?
In this type of attack, the attacker poses as an authorized user or administrator in order to trick someone into giving them sensitive information, such as passwords or confidential data.
This type of attack can be particularly effective because people often trust authority figures and may be more likely to comply with their requests.
To protect against impersonation attacks, it is important to be vigilant and to verify the identity of anyone who claims to be an authorized user or administrator, especially if they are requesting sensitive information.
To know more about social engineering, visit: https://brainly.com/question/30351890
#SPJ4
Which command must be used on a Linux device to determine the IP configuration of the etho network interface? [Choose all that apply] ip address show etho ifconfig /all ifconfig ifconfig etho ipconfig /all
Answers
The correct answer is To determine the IP address allocated to eth0 and show it on the screen, use the ifconfig or ip commands together with the grep command and other filters.
The network interface, IP address, and netmask parameters must all be specified in the ifconfig command before the netmask address. Use the "ifconfig" command, your network interface's name, and the new IP address you want your machine to have to change your IP address on Linux. Either use the CIDR notation directly or add a "netmask" clause before the subnet mask to assign the subnet mask. The "ifconfig" command can be used to show the current network configuration information, configure a network interface's hardware address, ip address, netmask, or broadcast address, create an alias for the network interface, and enable or deactivate network interfaces.
To learn more about ifconfig click on the link below:
brainly.com/question/13097970
#SPJ4
Understanding Binary Search Trees (20 pts)Suppose we are searching for some key a in a BST. As we perform the search, we compare a to the keys on the path from the root to the leaf in the BST. Which sequences below cannot be the sequence of keys examined during the search? Explain why not. Do not assume that the searches below are performed on the same BST(a) (4 pts) 10, 8, 6, 4, 2, 1(b) (4 pts) 11, 105, 23, 92, 35, 87, 43, 78, 60, 59(c) (4 pts) 45, 15, 88, 75, 52(d) (4 pts) 12, 25, 106, 44, 87, 56(e) (4 pts) 21, 75, 32, 87, 44, 50
Answers
10,8,6,4,2,1: Because the keys in a BST must be sorted in either increasing or decreasing order, this sequence cannot be the sequence of keys examined during the search in a BST.
Why might it not be feasible to utilize binary search on the extensive list?NO, because the repeated targeting of the mid-element of one half is dependent on the sorted order of the data structure, it is not possible to use or implement Binary Search on unsorted arrays or lists.
What's wrong with using a binary search tree?The height (or depth) of the tree definitely limits how long it takes to search in a BST. In the worst case, we will have to go all the way from the root to the deepest leaf in order to find X or discover that X is not in the tree because each step in the search goes down one level.
To know more about BST visit :-
https://brainly.com/question/29805215
#SPJ4
1-2 A spacecraft is in an Earth orbit whose periapsis altitude is
500 km
and whose apoapsis altitude is
800 km
. Assuming that the radius of the Earth is
R e
=6378.145 km
and that the Earth gravitational parameter is
μ=398600 km 3
⋅s −2
, determine the following quantities related to the orbit of the spacecraft: (a) The semi-major axis. (b) The eccentricity. (c) The semi-latus rectum. (d) The magnitude of the specific angular momentum. (e) The speed of the spacecraft at periapsis and apoapsis.
Answers
Orbital speed is influenced by the mass of the central body (Earth), the orbital radius, and the equation v = SQRT(G * Mcentral / R). The height of the satellite above the earth determines the orbital radius in turn.
What is the orbit calculation formula?The position of body m2 in relation to m1 is determined by the actual anomaly using the orbit formula, r = (h2/)/(1 + e cos ). We must be able to calculate the location of m2 as a function of time for a variety of practical reasons.
We can use the following equations to determine the variables associated with the spacecraft's orbit:
(a) The semi-major axis, a:
a = (r_p + r_a) / 2
(b) The eccentricity, e:
e = (r_a - r_p) / (r_a + r_p)
(c) The semi-latus rectum, p:
p = h^2 / μ
(d) The magnitude of the specific angular momentum, h:
h = r v
(e) The speed of the spacecraft at periapsis and apoapsis, v_p and v_a:
v_p = sqrt(μ (2 / r_p - 1 / a))
v_a = sqrt(μ (2 / r_a - 1 / a))
where:
r_p = radius of periapsis
r_a = radius of apoapsis
h = specific angular momentum
v = velocity
Using the given values, we have:
r_p = R_e + 500 km = 6878.145 km
r_a = R_e + 800 km = 7178.145 km
(a) The semi-major axis:
a = (r_p + r_a) / 2 = (6878.145 + 7178.145) / 2 = 7028.145 km
(b) The eccentricity:
e = (r_a - r_p) / (r_a + r_p) = (7178.145 - 6878.145) / (7178.145 + 6878.145) = 0.1427
(c) The semi-latus rectum:
p = h² / μ = r v² / μ = a (1 - e²) = 6078.144 km
(d) The specific angular momentum's size:
h = r v = sqrt(μ p) = 3.2943e+04 km²/s
(e) The spacecraft's speed during apoapsis and periapsis:
v_p = sqrt(μ (2 / r_p - 1 / a)) = 7.619 km/s
v_a = sqrt(μ (2 / r_a - 1 / a)) = 6.288 km/s
To know more about equation visit:-
https://brainly.com/question/10413253
#SPJ4
Can regression handle missing values?
Answers
The dependent variable is the one with the missing data. The regression equation is created using examples with complete data for the predictor variables, and it is then used to forecast missing values in cases with partial data.
What should you do in multiple regression when there are missing values?Easy methods include calculating the column's average and using that value. If there is a significant skew, the median may be preferable. Regression or closest neighbor imputation on the column to forecast the missing values is a preferable strategy. After that, carry on with your analysis and model.
How should missing values be managed?The elimination of the rows or columns with null values is one method of addressing missing values.
To know more about equation visit:-
https://brainly.com/question/24179864
#SPJ4
If the absolute pressure in a tank is 124 kPa , determine the pressure head in mm of mercury. The atmospheric pressure is 100 kPa. The density of the mercury is 13,550 kg/m3.Express your answer using three significant figures.Ps = _______ mm of mercury
Answers
In this way, absolute pressure, which is the sum of gauge pressure and atmospheric pressure: P atm = P g + P abs
P abs = P g + P atm where P atm is the pressure in the atmosphere, Pg is the pressure in a gauge, and P abs is the pressure in absolute terms. While gauge pressures (PG) are established using reservoir pressures, you must also choose the atmospheric pressure (P atm) because these pressures are absolute: P abs = P atm + PG. One millimeter of mercury is, as was said earlier, the pressure that a 1mm vertical column of mercury exerts at absolute zero. Moreover, we are aware that one atmosphere (atm) is equal to 760 mmHg, also known as one torr.
Learn more about pressure here-
https://brainly.com/question/29214145
#SPJ4
write a function sift : ('a -> bool) -> 'a list -> 'a list * 'a list such that sift p l returns a pair of lists, the first containing all the elements of l for which p returns true, and the second containing all those for which p returns false. the lists should be in the same order as in the input list. the function is required to use (only) forward recursion (no other form of recursion). you may not use any library functions.
Answers
The first input in the below Java program, which actually allows three, is a list of all the insert values. The second argument designates the starting place.
Why do you use the word parameter?A parameter is a variable that affects the output or behavior of a mathematical entity yet is perceived as being fixed. Sometimes it can only be a question of vision to tell a parameter from a variable.
What format should a parameter have?In JavaScript, the name of a argument (or parameters) should be put within the brackets that follow its function name. Then, you make references to the that argument name within the code. We can now utilize that function to provide the desired value.
To know more about parameter visit:
https://brainly.com/question/19579156
#SPJ4
the hermetic reciprocating compressor motor is essentially made of the same materials as an open type compressor motor. (T/F)
Answers
True. The materials used to construct an open type reciprocating compressor motor are also used to construct a hermetic reciprocating compressor motor.
What distinguishes a hermetic compressor from a reciprocating compressor?The reciprocating compressor has a displacement of 6.63m3/hr, whilst the hermetic scroll is a horizontal variant with a displacement of 2.08m3/hr. For tests at evaporation temperatures below 0°C, the refrigeration system served as the primary circuit and cooled a secondary glycol circuit.
Which compressor use an open motor as opposed to a hermetic one?An open motor is used in the rotary screw compressor rather than a hermetic one. A hermetic type reciprocating compressor's shell is typically thought of as being on the system's low pressure side.
To know more about compressor motor visit:-
https://brainly.com/question/30079848
#SPJ4
What are three reasons humans should alter the environment?
Answers
Numerous human activities such as overpopulation, pollution, the burning of fossil fuels, and deforestation have an adverse effect on the physical environment.
Climate change, soil erosion, poor air quality, and undrinkable water have all been brought on by changes like these. To grow food, people frequently alter or adapt their environs. Forests are burned down and crops are grown in the ashes in slas hand burn agriculture. People utilize terraced farming in hilly or mountainous settings, chopping the slopes into stairstep forms to provide level spots to grow seeds. Due to the fact that their wants are growing daily, humans are changing the environment around system.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
TRUE OR FALSE The step-motor valve uses a small motor to control the valve's port, which in turn controls evaporator superheat.
Answers
The statement is TRUE. The step-motor valve uses a motor to precisely adjust the valve port, which can control the evaporator superheat.
This valve works by using the motor to move the valve in precise steps, allowing for the precise adjustment of evaporator superheat.
The step-motor valve is often used in refrigeration systems to ensure the evaporator is operating within the optimal temperature range. This helps maintain the desired cooling effect while also helping to improve the system's efficiency.
Learn more about step-motor: https://brainly.com/question/29654721
#SPJ4
Which of the following protocol is concerned with labeling the packets for delivery and controlling the packets' path from sender to recipient?
A. TCP B. IP C. HTTP D. None of the above
Answers
The correct Answer is B. IP (Internet Protocol).
How do protocols like TCP and IP work together to ensure the efficient and reliable transmission of data over the Internet?TCP (Transmission Control Protocol) and IP (Internet Protocol) are two fundamental protocols used in the Internet Protocol Suite to enable the reliable and efficient transmission of data over the Internet.
IP is responsible for addressing and routing packets between different devices on the Internet, while TCP provides a reliable, connection-oriented transport service for data exchange between applications. TCP breaks data into segments, assigns sequence numbers to each segment, and retransmits any segments that are lost or damaged.
IP then routes the TCP segments across the network based on the destination address, and TCP reassembles them into the original data stream at the receiving end. Together, TCP and IP ensure that data is transmitted reliably and efficiently, with congestion control mechanisms to prevent network congestion and packet loss.
To know more about TCP (Transmission Control Protocol) visit:
https://brainly.com/question/27581708
#SPJ4
Each resistor has a resistance of 80 kN. What is the equivalent resistance of the resistive network shown? Reg = number (rtol=0.01, atol=1e-05) kOhms
Answers
The resistive network's equivalent resistance is 120k Ohms.
What is the comparable formula?We apply the equation Eq = MW / n to determine the Gram Equivalent Weight. Here, we'll discover how to determine a compound's equivalent weight formula. If a chemical entity has a mass of g grammes, then the mass supplied contains the gramme equivalents determined by the valency factor moles.
We can utilise the approach of connecting resistors in series and parallel to determine the equivalent resistance of the resistive network. We can connect the two resistors in parallel starting from the circuit's right side:
1/Rp = 1/80k + 1/80k
1/Rp = 1/40k
Rp = 40k Ohms
Next, we can connect the 80k resistor and 40k resistor in series:
R = 80k + 40k
R = 120k Ohms
The resistive network's equivalent resistance is 120k Ohms as a result.
To know more about resistance visit:-
https://brainly.com/question/18238576
#SPJ4