Answer:
Explained below
Explanation:
The human body has a normal core temperature of around 37°C to 38°C.
Now, if it is heated up to say 39° to 40°C, fatigue will start to set in and the brain begins to tell the muscles to slow down.
If it's now heated to higher temperatures above above 41°C, the body will begin to experience heat exhaustion and therefore will start to shut down.
Due to this process, the body can't even sweat at that stage because blood flow to the skin will stops thereby making the body feel cold and clammy. Thus, chemical processes/reaction in the body will begin to be affected and the cells inside the body will start to deteriorate and thus there is now a huge risk of having multiple organ failure.
How do physical changes and chemical changes differ and how are they alike please at least 5 provide examples each for a brainliest!
Answer:
Physical changes only change the appearance of a substance, not its chemical composition. Chemical changes cause a substance to change into an entirely substance with a new chemical formula. Chemical changes are also known as chemical reactions.
How are physical and chemical changes similar and different? (compare and contrast) (Physical and chemical changes are similar because matter experiences a change in state, Physical changes are different because matter remains the same substance, just in a different state, whereas chemical changes change the matter
Examples of chemical changes are burning, cooking, rusting, and rotting. Examples of physical changes are boiling, melting, freezing, and shredding. Often, physical changes can be undone, if energy is input. The only way to reverse a chemical change is via another chemical changes.
Explanation:
please help me quickly
Answer:
tell me the question i cant see the picture
Explanation:
What provides the energy that drive convection in the atmosphere and
oceans? A.reflected light from the moon.B. Direct rays of the sun.C. Heat from the earth core
Answer:
A
Explanation:
The moon is connected to the ocoen
water is a compound with a chemical formula h2o. compare a physical change involving water with a chemical change involving water. how do the changes differ?
Answer:
Chemical would be water splitting into just hydrogen and oxygen. Where as a physical change would be if it turned to ice.
Explanation:
Which is a characteristic of colloids?
a. are homogenous mixtures
b. have large dispersed particles
c. will settle out over time
d. are made up of at least two substances
Answer:
D
-----------------------------------------------------------------
The definition of colloids is very disputed on whether or not it is homo/heterogenous. I wouldn't go with this answer, but its based on what you learned it was. At a microscopic level its hetero but at a macroscopic its homo.
They do have somewhat large dispersed particles but this better describes suspensions
They don't easily settle out.
And in order to be a mixture, they are made up of at least two substances
D is likely the best answer out of the bunch.
Colloids are made up of at least two substances. Therefore, option d is correct.
What are colloids?A colloid can be described as a mixture in which one substance consisting of dispersed insoluble particles is throughout another substance. The particles should be dispersed in a liquid. The term colloidal suspension can be referred to unambiguously as the overall mixture.
A colloid exhibits a dispersed phase and a continuous phase. The dispersed phase particles have a diameter of about 1 nm to 1 μm. Some colloids are translucent due to the Tyndall effect and other colloids can be opaque or have a slight color.
Hydrocolloids can be described as certain chemicals that are colloidally dispersible in water. Therefore becoming very "soluble" they can change the rheology by raising the viscosity.
A colloid possesses a dispersed phase and a continuous phase. A solute in a solution is individual molecules, whereas colloidal particles can be bigger.
Learn more about colloids, here:
https://brainly.com/question/11640006
#SPJ2
A student performs an experiment to study how sound waves are transmitted by placing a ringing buzzer inside a bell jar and sealing the jar. The student then connects the bell jar to a vacuum pump to remove the air from inside of the jar. The table shows the student’s observations before and after removing the air from the bell jar.
What can be concluded from the experiment?
A. Sound waves are transverse waves.
B. Sound waves do not transmit through material mediums.
C. Sound waves do not carry energy when they are transmitted.
D. Sound waves transfer energy through the vibration of particles in mediums.
Answer:
D. Sound waves transfer energy through the vibration of particles in mediums.
Explanation:
It can be concluded from the experiment that sound waves will only propagate through vibration of particles in mediums.
The particles of the medium is the air.
This type of wave is called a mechanical wave. A mechanical wave is one that requires material medium for their propagation.Option A ; Sound waves are transverse waves; while this might be true or not, we cannot ascertain that through this experiment described.
Option B: this negates the conclusion that should be drawn from the experiment.
Option C: we cannot draw this sort of conclusion from such an experiment as this.
Therefore, the right choice is that, sound waves transfer energy through the vibration of particles in mediums.
Filling up a balloon with hot air.
Physical or chemical
Answer:
Physical.
Explanation:
Nothing changes in a chemical state just adding hot air to a balloon.
I'm pretty sure this is classified as a chemical change.
How much a material takes time to burn?
Need Variables for the Experiment
(a) Independent Variable:
(b) Dependent Variable:
(c) Constant Variable:
(a)- Time
(b)- Heat produced(i guess)
(c)- Material
this is what I think, hope it helps
A driver wants to drive at a constant speed so he uses his cruise control. He wants the forces acting on him to be ___.
Group of answer choices
unbalanced
small
large
balanced
Answer:
balanced
Explanation:
A driver wants to drive at a constant speed so he uses his cruise control. He wants the forces acting on him to be balanced. Thus, the correct option for this question is D.
What is Cruise control?Cruise control may be defined as a type of system that significantly controls the speed of a motor vehicle automatically. It maintains the speed of the vehicle constant without the use of the accelerator pedal once you selected a specific speed.
The speed of the vehicle must remain constant during the course of time. This is possible when the force acting on the driver must be in a balanced state. Otherwise, it will be difficult for the driver to sustain the same speed for a long time.
Therefore, a driver wants to drive at a constant speed so he uses his cruise control. He wants the forces acting on him to be balanced. Thus, the correct option for this question is D.
To learn more about Cruise control, refer to the link:
https://brainly.com/question/10821585
#SPJ6
If Isaiah boiled 10 liters of water at 100°C, at which temperature would he boil 20 liters of water?
Group of answer choices
200°C
10°C
20°C
100°C
SOMEONE ANSWER DA QUESTON
please help me with this or I may get an F in chemistry :(
Answer:
Subconscious - psychic activity just below the level of awareness
Election - the act of electing someone
Explanation:
I hope this helped enough, good luck in chemistry!
write a 3 sentence summary about DNA.
I’ll mark you as the brainiest answer !!
Answer:
DNA is a complex, long-chained molecule. DNA contains the genetic blueprint for building and maintaining all living organisms. Found in nearly all cells, DNA carries the instructions needed to create proteins, specific molecules essential to the development and functioning of the body.
give an example how we use science in our every day life
Answer: When you turn a light on it becomes bright :)
In electrical wiring, a light switch is a switch most commonly used to operate electric lights, permanently connected equipment, or electrical outlets. Portable lamps such as table lamps may have a light switch mounted on the socket, base, or in-line with the cord. Manually operated on/off switches may be substituted by dimmer switches that allow controlling the brightness of lamps as well as turning them on or off, time-controlled switches, occupancy-sensing switches, and remotely controlled switches and dimmers. Light switches are also found in flashlights, vehicles, and other devices.
If Beryllium has a mass number of 7 and atomic number of 4, how many protons does it have?
Answer:
4
Explanation:
Answer:
4
Explanation:
So the atomic number is still the proton number and it is always smaller than the atomic mass so the proton number is 4.
HOPE IT HELPED
Match the block to its correct density.
1 .
0.917 Kg/L
Block A
2 .
0.70 Kg/L
Block B
3 .
3.53 Kg/L
Block C
4 .
19.3 Kg/L
Block D
5 .
0.64 Kg/L
Block E
Answer:
Block A - 19.3
Block B - 0.64
Block C - 0.70
Block D - 0.917
Block E - 3.53
Hope this helps :)
Answer:
Block A - 19.3
Block B - 0.64
Block C - 0.70
Block D - 0.917
Block E - 3.53
Explanation:
LMK ASAP PLS
Energy released in nuclear fusion is several 100 million times smaller than chemical reaction like the combustion process
o True
o False
Please HELP HELP ME!!!
PLZ DON"T JUST PICK AN ANSWER I REALLY NEED HELP
5. Sodium-24 has a half-life of approximately 15 hours. If only one-eighth of the sodium-24 remains, about how much time has passed?
A. 15 hours
B. 30 hours
C. 45 hours
D. 60 hours
Answer:
60 hours
Explanation:
18.0 __15__ 9 __15__ 4.5 __15__ 2.25 __15__ 1.125g
15(4)= 60
Sodium-24 has a half-life of approximately 15 hours. If only one-eighth of the sodium-24 remain , then it has been passed in 60 hours. So option D is correct.
What is half life and decay law ?The time required for half of the original population of radioactive atoms to decay is called the half-life. The relationship between the half-life, T₁ ÷ 2, and the decay constant is given by T₁/2 = 0.693/λ
According to radioactive decay law, the rate of decay of radioactive atoms at any instant is directly proportional to the number of atoms present at that instant.
dtd N ∝ N
dtd N = λ N
where, N is number of integrated nucleus present in the sample at any time t and λ is decay constant.
Thus ,option D 60 hours is correct.
To learn more about half life follow the link below :
https://brainly.com/question/16387602
#SPJ2
What is generally true about the particles in a gas?
A. Gas particles are closer together and have stronger attraction between them than the particles in a solid.
B. Gas particles are closer together and able to conduct electricity better than the particles in a plasma.
C. Gas particles are farther apart and able to conduct electricity better than the particles in a liquid.
D. Gas particles are farther apart and have weaker attraction between them than the particles in a solid.
Answer:
D
Explanation:
The splitting of the nucleus of an atom to produce energy is called _____ ?
A. geothermal energy
B. nuclear fission
C. nuclear fusion
D. hydroelectric power
Answer:
Explanation:
B . Is the correct answer
someone help me please, I will give you brainliest
Answer:
conserve mass.
Explanation:
a solid that is formed during a chemical reaction, typically solution
Answer:
precipitate
Explanation:
pretty sure it's right but sorry if i'm wrong:)
What is the density at 27 °C of 28.0 milliliters of a liquid that has a mass of 4.05 grams?
Answer:
4.05/28=0.144g/ml
Explanation:
5. How can you use the periodic table to help predict the types of bonds elements will form?
When elements form ionic bonds, each atom is left with a __________________ outer shell.
WILL MAKE BRAINLIEST !!! help plssss
Answer:
Each atom is left with a complete outer shell. An ionic bond forms between a metal ion with a positive charge and a nonmetal ion with a negative charge.
HOPE DAT HELPS BRO!
Write two uses of sublimation process?
Answer:
Explanation:
Practical Applications of Sublimation
Sublimation and erosion cause ablation, a process that wears down glaciers. Sublimation of iodine may be used to reveal latent fingerprints on paper. Sublimation is used to purify compounds. ... Because dry ice sublimates so readily, the compound is used to produce fog effects.
A student is examining an object in science class. It is pale yellow,brittle solid, with no shine. The sample is most likely a—
Answer: non metal
Explanation:
Nonmetals are dull, possess high ionization energies and electronegatives and are typically poor electricity conductors as they're insulators.
Non metals are also brittle and possess low melting point. Therefore, with the explanation, the sample is most likely a non metal.
Im literally failing some classes can some one help me with them
Answer:in can
Explanation:
Answer:
What are your subjects you need help with?
Please help it’s due today. I will give brainliest.
Answer:
both conserve mass
Explanation:
Answer:
B.both conserve mass.
This is not a multiple choice question