The achievement of lifting a rocket off the ground and into space can be explained by

Answer:

The magnitude of the friction force exerted on the box is 2.614 newtons.

Explanation:

Since the box is sliding on a rough horizontal floor, then it is decelerated solely by friction force due to the contact of the box with floor. The free body diagram of the box is presented herein as attachment. The equation of equilbrium for the box is:

[tex]\Sigma F = -f = m\cdot a[/tex] (Eq. 1)

Where:

[tex]f[/tex] - Kinetic friction force, measured in newtons.

[tex]m[/tex] - Mass of the box, measured in kilograms.

[tex]a[/tex] - Acceleration experimented by the box, measured in meters per square second.

By applying definitions of weight ([tex]W = m\cdot g[/tex]) and uniform accelerated motion ([tex]v = v_{o}+a\cdot t[/tex]), we expand the previous expression:

[tex]-f = \left(\frac{W}{g} \right)\cdot \left(\frac{v-v_{o}}{t}\right)[/tex]

And the magnitude of the friction force exerted on the box is calculated by this formula:

[tex]f = -\left(\frac{W}{g} \right)\cdot \left(\frac{v-v_{o}}{t}\right)[/tex] (Eq. 1b)

Where:

[tex]W[/tex] - Weight, measured in newtons.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]v_{o}[/tex] - Initial speed, measured in meters per second.

[tex]v[/tex] - Final speed, measured in meters per second.

[tex]t[/tex] - Time, measured in seconds.

If we know that [tex]W = 52.4\,N[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v_{o} = 1.37\,\frac{m}{s}[/tex], [tex]v = 0\,\frac{m}{s}[/tex] and [tex]t = 2.8\,s[/tex], the magnitud of the kinetic friction force exerted on the box is:

[tex]f = -\left(\frac{52.4\,N}{9.807\,\frac{m}{s^{2}} } \right)\cdot \left(\frac{0\,\frac{m}{s}-1.37\,\frac{m}{s} }{2.8\,s} \right)[/tex]

[tex]f = 2.614\,N[/tex]

The magnitude of the friction force exerted on the box is 2.614 newtons.

Answer:

Step 1: Change Water Vapor into Liquid Water

But in order to grow a cloud, we need to get the water vapor from a gas to its liquid form. Clouds begin to form when a parcel of air rises from the surface up into the atmosphere

Explanation:

Answer: The forces acting on both of them will increase in magnitude.

Explanation:

According to Coulomb's law, the electrostatic force between two bodies is proportional to the product of their two charges. If the charge on A is increased this product increases in size (it must have been non-zero to begin with, since there was a force between them at first). Thus, the force between them rises.

Answer:

d. seems like the right answer.

Explanation:

Answer:

Explanation:

Given the distance of the particle from the starting point at time t is given by the function: s=t⁵−6t⁴

velocity v(t) = ds/dt

[tex]v(t) = 5t^{5-1}-4(6)t^{4-1}\\v(t) = 5t^4-24t^3\\[/tex]

Next is to get the acceleration function:

[tex]a(t) = 4(5)t^{4-1}-3(24)t^{3-1}\\a(t) = 20t^3-72t^2[/tex]

Next is to get the value of t at which the acceleration is equal to zero

[tex]a(t) = 20t^3-72t^2\\0 = 20t^3-72t^2\\20t^3-72t^2 = 0\\t^2(20t-72) = 0\\t^2 =0 \ and \ 20t-72 = 0[/tex]

Since t ≠ 0, hence;

20t -72 = 0

20t = 72

t = 72/20

t = 3.6secs

Hence the value of t (other than 0 ) at which the acceleration is equal to zero is 3.6secs

Answer:

Explanation:

Scientific research conducted by psychologists, organized by topics here, can inform and guide those seeking help with issues that affect their professional lives, family relationships and emotional wellness.Tips for choosing a psychotherapist and answers to financial questions related to therapy.

When faced with important events (stressors) which are threatening or very hard to, psychological symptoms of stress include anxiety and tension, uncontrollable. In general, this refers to high levels of suspicion and mistrust, usually seen in this psychological condition is associated with acute physical sickness

plz mark as brainliest

Answer:

The temperature of the low temperature thermal reservoir is 300 K.

Explanation:

All reversible power cycles are equivalent to the Carnot's cycle, whose equation for efficiency is:

[tex]\eta_{th} =1-\frac{T_{L}}{T_{H}}[/tex] (Eq. 1)

Where:

[tex]\eta_{th}[/tex] - Thermal efficiency, dimensionless.

[tex]T_{H}[/tex] - High temperature reservoir, measured in Kelvin.

[tex]T_{L}[/tex] - Low temperature reservoir, measured in Kelvin.

Now we proceed to clear the low temperature reservoir within:

[tex]\frac{T_{L}}{T_{H}} = 1-\eta_{th}[/tex]

[tex]T_{L} = (1-\eta_{th})\cdot T_{H}[/tex]

If [tex]\eta_{th} = 0.75[/tex] and [tex]T_{H} = 1200\,K[/tex], then:

[tex]T_{L} = (1-0.75)\cdot (1200\,K)[/tex]

[tex]T_{L} = 300\,K[/tex]

The temperature of the low temperature thermal reservoir is 300 K.

Answer: 9 km/h

Explanation:i’m pretty sure

Answer:

Well, it depends on the type of car but a regular car like a toyota 4x4 only goes at 5k/h if the car starts when complete rest

Answer:

90 km

Explanation:

45 km per hr

2 hrs

45 x 2 = 90

90 km/2 hrs

Hope this helps!

Answer:

transmission:  the act or process by which something is spread or passed from one person or thing to another

reflection: when light from an object is reflected by a surface, it changes direction. It bounces off the surface at the same angle as it hits it. Smooth, shiny surfaces such as mirrors and polished metals reflect light well.

refraction: change in direction of a wave passing from one medium to another or from a gradual change in the medium

diffraction: various phenomena that occur when a wave encounters an obstacle or opening

Answer: True

Explanation:

Pencils indeed should not be used as tools when working inside a computer because it is made of Lead.

Lead is a conductor of electricity and as such if it is left inside the computer at even miniscule quantities, it can redirect electricity and damage components in the process.

If one wants to work inside a computer, it is best to use tools like tweezers and needle-nose pliers.

Due to the presence of graphite(A good conductor of electricity), Pencils should not be used inside the computer to change the setting of switches.

The conductors are the materials that can allow electricity and heat to pass through them.

Since the pencils are made up of graphite which is a good conductor of electricity. When we use pencils to do something inside the computer circuits and if some portion of the graphite remains on the circuit board.

Now due to the good conducting property of the graphite, it will allow the current to flow and the short circuit of the circuit board can take place which will damage the computer.

Thus due to the presence of graphite(A good conductor of electricity). Pencils should not be used inside the computer to change the setting of switches.

To know more about Conducting materials follow.

https://brainly.com/question/771692

Answer:

they are less stable

Explanation:

i took the test

Answer:a

Explanation:

The formation of salt takes place by the sharing of positive ions from a base and negative ions from an acid. Hence, option (a) is correct.

The given problem is based on the concept and fundamentals of Neutralization. The process of neutralization is the name given to the chemical reaction between that takes place between the acid and base.

Thus, we can conclude that the formation of salt takes place by the sharing of positive ions from a base and negative ions from an acid. Hence, option (a) is correct.

Learn more about the Neutralization reaction here:

https://brainly.com/question/16188332

Answer:

he needs more because he is doing more exercise this means he is working his body more and he needs more energy than someone he is sitting in an office. The computer operator would not need as much energy as the brick layer.

Answer:

The viscosity is  [tex]\eta  = 0.76243 \ kg/ m \cdot s [/tex]  

Explanation:

From the question we are told that

  The  density is  [tex]\rho  =  7.80 *10^{3} \  kg/m^3[/tex]

  The diameter is  [tex]d =  3.0 \  mm =0.003 \ m[/tex]

    The  time taken is  [tex]t  =  12 \ s[/tex]

   The  distance covered is  [tex]d =  0.60 \ m[/tex]

Generally the velocity of the ball is  

      [tex]v  =  \frac{d}{t}[/tex]

=>    [tex]v  =  \frac{0.60}{12}[/tex]

=>    [tex]v  =  0.05 \ m/s [/tex]

Generally the mass of the steel ball is  

    [tex]m  =  \rho  *  V[/tex]

Here  V  is the volume and this is mathematically represented as

     [tex]V  =  \frac{4}{3} *  \pi  * [\frac{d}{2}  ]^3[/tex]

=>    [tex]V  =  \frac{4}{3} *  3.142  * [\frac{0.003}{2}  ]^3[/tex]

=>      [tex]V  = 1.414 *10^{-8} \  m^3[/tex]

So

     [tex]m  = 7.80 *10^{3}  *   1.414 *10^{-8}[/tex]

     [tex]m  = 0.00011 \  kg [/tex]

Generally the viscosity is mathematically represented as  

     [tex]\eta  =  \frac{m  *  g}{6\pi  *  r  *  v }[/tex]

Here  r is the radius represented as

      [tex]r =  \frac{d}{2}[/tex]

=>   [tex]r =  \frac{0.003}{2}[/tex]

[tex]r =  0.0015  \  m [/tex]

So

  [tex]\eta  =  \frac{0.00011  *  9.8}{6 *  3.142   * 0.0015  * 0.05 }[/tex]    

=> [tex]\eta  = 0.76243 \ kg/ m \cdot s [/tex]

Answer:

In the taller, skinnier cylinder, each tick mark represents 2, while in the larger one, each tick mark represents 50.

Explanation:

If you count the tick marks between each big number, then you can divide, and figure out what amount each tick mark represents.

Answer:

A physical change involves a change in physical properties. Examples of physical properties include melting, transition to a gas, change of strength, change of durability, changes to crystal form, textural change, shape, size, color, volume and density.

Explanation:

Answer:

Explanation:

To find the force acting on an object given it's mass and acceleration we use the formula

From the question

mass = 1720 kg

acceleration = 3.0 m/s²

We have

Force = 1720 × 3

We have the final answer as

Hope this helps you

Answer:

Final velocity (v) = 5.148 m/s (Approx)

Explanation:

Given:

Initial velocity (u) = 3.05 m/s

Acceleration (a) = 2.82 m/s²

Displacement (s) = 18.4 m

Find:

Final velocity (v)

Computation:

v² = u² + 2as

v² = (3.05)² + 2(2.82)(3.05)

v² = 9.3025 + 17.202

v² = 26.5045

v = 5.148 m/s (Approx)

Answer:

124m/s

Explanation:

v=u+at

v=119+(0.5×10)

v=119+5

v=124m/s

Answer:

so its easier to understand for the reader

Explanation:

2) Labelling. Graphs are used to present data. They must be clearly labelled if the reader is to understand them. By labelling we are referring to the text inside the graph itself, and not the title.

Answer:

Energy of gamma ray = 506250 eV

Explanation:

We are told that the mass of an electron or positron is 9 × 10-31 kg.

This means that their energies will be the same.

Thus; E_e = E_p

Now, since electron and positron annihilate to form gamma(γ) particle, then using work energy principle, we have;

E_γ + E_γ = E_e + E_p

Thus;

2E_γ = E_e + E_p

Since E_e = E_p, we now have;

2E_γ = 2E_e

Thus;

E_γ = E_e

Since all the energy of the electron is converted, then from Einstein's relativity theory, this implies that;

E_e = mc²

c is speed of light = 3 × 10^(8) m/s

And m is given as 9 × 10^(-31) kg

Thus;

E_e = 9 × 10^(-31) × (3 × 10^(8))^(2)

E_e = 810 × 10^(-16) J

Since E_γ = E_e

Thus;

E_γ = 810 × 10^(-16) J

We are given that; 1.6 × 10^(-19) J = 1eV

Thus; 810 × 10^(-16) J gives;

(810 × 10^(-16) × 1)/(1.6 × 10^(-19)) = 506250 eV

Answer:

regenerating arms....

Answer:

Mass of bullet is m=0.01kg

Mass of the block is M=4kg

Coefficient=0.25,distance=20m

So, let the speed of the block just after the bullet embedded in it be V and v be the speed of bullet before striking the block,

By applying conservation of momentum,

mv=(m+M)V

V=

M+m

mv

Explanation:

please mark me as the brainliest answer and please follow me for more answers to your questions..

The initial velocity of the bullet is 382 m/s

The given parameters;

Apply the principle of conservation of mechanical energy;

The maximum potential energy of the bullet-wood system at the top of the port  = maximum kinetic energy of the system at the base of the port.

[tex]K.E_{max} = P.E_{max}\\\\\frac{1}{2} mv_{max}^2 = mgh_{max}\\\\v^2_{max} = 2gh_{max}\\\\v_{max} = \sqrt{2gh_{max}} \\\\v_{max} = \sqrt{2\times 9.8\times 2} \\\\v_{max} = 6.26 \ m/s[/tex]

Apply the principle of conservation of linear momentum to determine the initial velocity of the bullet;

[tex]m_1u_1 + m_2u_2 = v(m_1 + m_2)\\\\0.6(0) + 0.01(u_2) = 6.26((0.6 + 0.01)\\\\0.01u_2 = 3.819\\\\u_2 = \frac{3.819}{0.01} \\\\u_2 = 381.9 \ \approx 382 \ m/s[/tex]

Thus, the initial velocity of the bullet is 382 m/s

Learn more here:https://brainly.com/question/24424291

Answer:

  E = -80.33 V

Explanation:

For this exercise we use Faraday's law of induction

         E = - N d[tex]\phi _{B}[/tex] / dt

where the magnetic flux is

        \phi _{B} = B A cos θ

In the exercise they indicate that the magnetic field is perpendicular to the coil, therefore the normal of the coil area and the field has the same direction, consequently the angle is zero. Since the area is constant

        E = - N A dB / dt

let's look for each term

        a =π r²

they tell us that the variation in the field is linear

         dB / dT = (B_f-B₀) / t

we substitute

       E = - N (π r²) (B_f -B₀) / t

let's calculate

       E = - 206 π 0.31² (54 - 23) 10⁻³ / 24 10⁻³

        E = -80.33 V