Why is there no answer
Answer:
i don't know
Explanation:
Living organisms need energy to carry on their life processes. Photosynthesis is a process that allows for photosynthesizing organisms, such as algae and green plants, to produce their own materials for energy production and survival. This process can be outlined as a simplified chemical equation containing reactants (goes into the process) and products (made/comes out of the process).Using your knowledge of science and figures above, select the choice that accurately expresses photosynthesis.
the correct combo is C
We know sunlight is key factor in photosynthesis so A and D are out.
we also know plants get their bulk by breaking up co2 and using the carbon which releases oxygen as a byproduct so B is also out of the question.
in today's pandemic,how can you protect our ozone depletion?
Answer:
if you want to protect our ozone depletion you have aerosol products that don't contain HCFCs and CFCs as stimulus or incitement
Explanation:
why you should use aerosol because when the liquid mixture is freeded or released from the aerosol the liquid propellant becomes a gas so this can easily break up the product into a fine haze or a mist hope its helpful have a good luck
How is Melting and Cooling of Rock like a Chocolate Bar?
Answer:
Melting and cooling of a rock is like a chocolate bar because, when chocolate melts, it happens with heat just like melting of a rock. When chocolate cools, it just becomes a solid with no heat just like rocks when becoming an igneous rock.
Explanation:
You can kinda re-phrase it if u want cause yea. hhah.
A wildfire destroys most of the plant life in a forest. What would most likely happen to the animals that lived in the forest?
Answer:
They would be pushed out and lose their homes
Explanation:
A wildfire destroys most of the plant life in a forest. Animals would be pushed out and lose their homes.
What is wildfire?An unplanned, uncontrolled, and unpredictable fire inside an area of flammable vegetation is known by several names, including wildfire, bushfire, bushfire, wildland fire, and rural fire. A wildfire may be more precisely referred to by the terms bushfire, desert fire, forest fire, hill fire, peatland fire, prairie fire, vegetable fire, or veld fire, depending on the kind of vegetation that is present.
Wildfires are separate from controlled and prescribed burning, which is a good human use of wildland fire, even though controlled burns have the potential to turn into wildfires. Wildfires likely started shortly after terrestrial plants first appeared, which occurred in the Silurian epoch 419 million years ago, according to fossil charcoal. A wildfire destroys most of the plant life in a forest. Animals would be pushed out and lose their homes.
Therefore, animals would be pushed out and lose their homes.
To know more about wildfire, here:
https://brainly.com/question/12110285
#SPJ3
Which element is used in the treatment of patients with respiratory diseases in hospitals?
Answer:
I think the oxygen.
Answer:
Oxygen (O2)
Explanation:
The fundamental importance of oxygen to life on this planet ensures its place in the care of patients with respiratory disorders. Although now well established for hypoxic patients, many questions remain regarding the benefits of oxygen for varying severity and types of chronic lung disease.
THIS IS SCIENCE
PLEASE HELP
Answer:
An unbalanced force? .
Pls give me feedback if thats not right.
An atom has 5 protons in its nucleus that gives it a positive charge. What can be inferred about the number and position of other particles that make the atom electrically neutral? *
A. 5 neutrons are located inside the nucleus.
B. 5 electrons are located inside the nucleus.
C. 5 neutrons are located outside the nucleus.
D. 5 electrons are located outside the nucleus.
Answer:
D. 5 electrons are located outside the nucleus.
Explanation:
Protons have a +1 positive charge, electrons have a -1 negative charge. Protons are in the nuclues and electrons are orbiting in the electron cloud.
Which statement below accurately describes the atoms of a specific element?An antimony, Sb, atom contains 122 protons inside the nucleus and 51 neutrons outside the nucleus.A manganese, Mn, atom contains 55 electrons outside the nucleus and 25 neutrons inside the nucleus.A chlorine, Cl, atom contains 35 electrons and 27 protons inside the nucleus.An arsenic, As, atom contains 33 protons inside the nucleus and 33 electrons outside the nucleus.
Answer: An arsenic, As, atom contains 33 protons inside the nucleus and 33 electrons outside the nucleus.
Explanation:
The protons are positively charged, electrons are negatively charged and neutrons has no charge (neutral). The protons and neutrons are present inside the nucleus and the electrons are located outside the nucleus.
Antimony (Sb) has an atomic number of 51 and thus contains 51 electrons and 51 protons. It has a mass number of 121 and thus conatins 70 neutrons.
Manganese (Mn) has an atomic number of 25 and thus contains 25 electrons and 25 protons.
Chlorine (Cl) has an atomic number of 17 and thus contains 17 electrons and 17 protons.
Arsenic (As) has an atomic number of 33 and thus contains 33 electrons and 33 protons.
list out the effects seen inplants due to lack of phosphorus.
Answer:
Plants normally turn dark green and look stunted (both leaves and stalks). Older leaves are first affected and may become violet. Sometimes the brown tips of the leaves remain fragile and their maturity seems to be delayed.
Explanation:
it is what it is booiiii
Determine the molarity of a solution formed by dissolving 0.968 g of MgCl2in enough water to yield 150.0 mL of solution.
Answer:
M = 0.0678 M
Explanation:
Hello there!
In this case, since the molarity of a solution is obtained by dividing the moles by the volume, it is firstly necessary to compute the moles of magnesium chloride in 0.968 g, via its molar mass, as shown below:
[tex]n=\frac{0.968g}{95.21g/mol}=0.0102mol[/tex]
Next, since 150.0 mL in liters is 0.1500 L, according to the appropriate units, the resulting molarity is:
[tex]M=\frac{0.0102mol}{0.1500L}\\\\M=0.0678M[/tex]
Best regards!
What is the percent composition of Mg in the compound Mg3(PO4)2?
Question 8 options:
A. 23.57%
B. 21.92%
C. 27.74%
D. 32.32%
Answer:
c
Explanation:
trust me its reasonanle
Per cent composition of Magnesium (Mg) in Magnesium Phosphate compound ie [tex]Mg_3(PO_4)_2[/tex] is 27.74%. Hence, option C is correct.
What is per cent?Percent is from the Latin adverbial phrase per centum meaning “by the hundred.”
Determination of the percentage composition of Mg in Mg₃(PO₄)₂
Molar mass of Mg₃(PO₄)₂ = 262 g/mol
Mass of Mg in Mg₃(PO₄)₂ = 24×3 = 72 g
Percentage composition of Mg =?
[tex]Percentage = \frac{Mass \;of \;elements x 100}{Mass \;of \;compound}[/tex]
[tex]Percentage = \frac{72 X 100}{262}[/tex]
27.74%.
Hence, option C is correct.
Learn more about per cent here:
https://brainly.com/question/21311916
#SPJ2
1 When 25 cm of 1.0 mol/dmº copper sulfate solution was mixed vith an excess of zinc
powder, the temperature of the solution rose by 50.6 °C. Calculate the energy change
for the reaction in kJ/mol.
CuSO4(aq) + Zn(s) + Cu(s) + ZnSO4(aq)
?
Answer:
See explanation
Explanation:
From the formula for heat;
q (enthalpy change) = (mass of solution) x (specific heat capacity) x (temperature change)
Since the density and heat capacity of the solution are the same as that of pure water.
Mass of copper sulphate solution = 50 g
Heat = 50 * 4.18 * 50.6°C
Heat = 10575.4 J
Number of moles = 1 * 25/1000 = 0.025 moles
10575.4 J/ 0.025 moles = 432016 J/mol/1000
= 423 KJ/mol
or
q = - 423 KJ/mol
what are 2 products of an acid base neutralization reaction
Water and NaCI
water and salt
a neutral solution and water
a different acid and base
Answer:
a different acid and base
Explanation:
A case of paper has a mass of 2000 g. A case of paper contains 10 reams of paper. One ream of paper is 500 sheets. What is the mass, in grams, of 50 sheets of paper?
Answer:
s8sooooosoossososososkdk
What are the three major categories used to classify elements?
a Solids, liquids, gases
b Protons, neutrons, electrons
c Groups, periods, states
d Metals. non-metals, metalloids
Answer:
i think option no. " D " = " metals, non-metals, metalloids " is the correct answer.
hope this answer will help u.
have a great time
1. An atom is the
a. basic unit of matter
b. volume of a substance
c. amount of matter in an object
d. smallest object seen by the unaided eye
Answer:
A. Basic Unit Of Life.
Explanation:
Matter is made up of elements. Also, We have Atoms In our Body.
Why would the presence of oxygen bubbles be a good indicator of photosynthesis occurring?
kdjsbjsof in bwjfiejwnjfifihdhwhbsd
If the moon is half full on January 2, on approximately what date will it next become full?
A. February 15
B. February 2
C. January 31
D. January 9
Answer: don’t listen to him the answer is January 9
Explanation: jus took the test
which of the following is not found in cytoplasm
A.water
B.carbohydrates
C.salt
D.vitamins
Answer:
Carbohydrates
Explanation:
this is because cytoplasm is a substance that fills living cells.
A swimming pool is 50 meters long. How long is a swimming pool in cm?
(100 cm = 1 m)
Answer:
5000 cm
Explanation:
100 cm = 1m
100 x 50 = 1 x 50
5000 cms = 50 meters
Pl help it’s for a grade
Answer:
A
Explanation:
kinetic energy of a body at rest = 0
- How does melting point compare among molecular compounds and ionic compounds?
Molecular compounds tend to have lower melting points.
Molecular compounds tend to have higher melting points.
Both compounds have melting points within the same temperature range.
Answer:
The melting and boiling points of molecular compounds are generally quite low compared to those of ionic compounds. This is because the energy required to disrupt the intermolecular forces between molecules is far less than the energy required to break the ionic bonds in a crystalline ionic compound (Figure 6.2. 1) .
Explanation:
hopefully this helps :)
if not then here. (Most of the time, the melting points of ionic compounds are very high compared to the melting points of molecular compounds.)
Answer: A. Molecular compounds tend to have lower melting points
Explanation:
help, please? What science law explains why there should always be the same type of elements on the reactant side as there are on the product side? What does this law state? (HINT: Answer both of these questions. A: The Law of _________________ states that _____________.)
Answer:
the law of conservation of energy states that energy neither created nor destroyed that means in a chemical reaction Mass reactants ( starting material)=tomass of produt
Can someone please help me with this
1.
John ground some coffee beans into little pieces. He put them into a coffee filter and poured
800 cm3 of boiling water over them to make a jug of coffee.
coffee filter
Coffee
Beans
ON
jug of coffee
(a) Complete the sentences below. For each sentence, choose one of the following
words.
insoluble
soluble
solution
solvent
(0)
The liquid in the jug is brown because parts of the coffee beans
are
in water.
1 mark
Students in a science class learn that groundwater is an important
source of drinking water for many communities. They construct a model
to study how leaking chemicals from a landfill can affect groundwater.
What is the most effective way for the students to see how leaking
chemicals from a landfill can enter a well?
Select one:
A: Pump water out of the well to see how stained water from the tissue paper
moves toward the well.
B: Drop food color into the well at the well's opening.
C: Tear some of the colored tissue paper and put the paper pieces into the well at
the well's opening
D: Tilt the tank towards the well and drain some of the water out of the tank.
What is the volume of an object that has a mass of 5.80 g and a density of 6.35 g/mL?
Answer:
1.09 mL
Explanation:
Density is a measure of a substance's mass over its volume.
d = m/v
We can rearrange the equation to solve for volume, using algebra.
v = d/m
Therefore v = 6.35/5.80 = 1.09 mL
is my current answer correct? if not, please correct me
Answer:
Yes you’re correct :)
Explanation:
What is the density of a liquid that has a volume of 20.0 mL and a mass of 15.8 grams?
Answer:
D= 0.79 g/mL
Explanation:
Density= mass/volume
D= (15.8 g)/(20.0 mL)
D= 0.79 g/mL