The gas that would deviate the least from ideal gas behavior is Ne (Neon).
Neon is a noble gas and has no permanent dipole-dipole interactions, making it behave most like an ideal gas.Neon is a diatomic molecule, meaning it is composed of two atoms, and its molecules are not very polar or reactive.Neon is a noble gas element with the atomic number 10 and symbol Ne. It is odorless, colorless, and gas at room temperature and pressure. It is used in a variety of applications, including electric signs, fluorescent lamps, high-voltage indicators, lightning arresters, welding, and lasers. It is also used in cryogenics and in some medical treatments.
learn more about Neon Refer:brainly.com/question/14310402
#SPJ4
Pls help
Predicting products of chemical Reactions!
Which of the following aqueous solutions has the highest boiling point?
A.0.1M KNO3
B.0.1M Na3PO4
C.0.1M BaCl2
D.0.1M K2SO4
The aqueous solutions has the highest boiling point (Elevation of boiling point) is in the case of Na3PO4.
Boiling point elevation refers to the increase in the boiling point of a solvent upon the addition of a solute. When a non-volatile solute is added to a solvent, the resulting solution has a higher boiling point than that of the pure solvent. Therefore the aqueous solutions has the highest boiling point (Elevation of boiling point) is in the case of Na3PO4.
To know more about solutions please refer:
https://brainly.com/question/30665317
#SPJ4
The aqueous solutions has the highest boiling point (Elevation of boiling point) is in the case of Na₃PO₄.
Boiling point elevation refers to the increase in the boiling point of a solvent upon the addition of a solute. When a non-volatile solute is added to a solvent, the resulting solution has a higher boiling point than that of the pure solvent. Therefore the aqueous solutions has the highest boiling point (Elevation of boiling point) is in the case of Na₃PO₄.
To know more about solutions please refer: brainly.com/question/30665317
#SPJ4
explain the atomic radius trend periodic table?
On general basis in modern periodic table, the atomic radius decreases as we move from left to right in a period and it increases when we go down a group.
Trend-wise in modern periodic table, as we moves from left to right across a period in the modern periodic table, the ionization energy increases due to the increase in nuclear charge which results in the decrease of atomic size. Again, the decrease in the atomic size results in a more potent force of attraction between the electrons and the nucleus.
As we move down the group in the modern periodic table there is an increase in the atomic size due to the addition of an extra shell.
Learn more about atomic size from the link given below.
https://brainly.com/question/1127028
#SPJ4
The chemical digestion of proteins begins in the:a. stomachb. small intestinec. mouthd. pancreas
Proteins are chemically broken down starting in the stomach and finishing in the small intestine. To produce more proteins, the body reuses amino acids.
What is chemical digestion?Large food molecules are broken down chemically during chemical digestion into their component parts, which can subsequently be absorbed past the intestinal wall and into the bloodstream. Most chemical digestion is carried out by pancreatic and intestinal brush border enzymes. The small intestine is where the majority of chemical digestion occurs.The pylorus and duodenum are where the stomach's digested food travels after leaving the stomach. Chime will combine with the pancreatic and duodenal secretions in this area. In the small intestine, enzymes such as amylase, maltase, sucrase, lactase, etc. transform carbohydrates into monosaccharides and disaccharides. By means of lipases, fats are transformed into fatty acids and glycerol in the small intestine. There are two different forms of digestion: mechanical and chemical.
To learn more about chemical digestion refer to:
https://brainly.com/question/15822608
#SPJ4
how to write lewis structure ch2o?
The lewis structure of the CH₂O is as follows :
: O :
||
H : C : H
The Hydrogen is the Group I element with the only one electron in its outermost shell. The Oxygen is the Group VI element with the six electrons in its outermost shell. The Carbon is the element of the Group IV element with the four electrons in its outermost shell. In the lewis structure of the CH₂O the total valence electrons are 12 valence electrons.
The total number of the valence electrons in the carbon is four. The total number of the valence electrons in the oxygen is six. The total number of the valence electrons in the hydrogen is one.
To learn more about lewis structure here
https://brainly.com/question/20300458
#SPJ4
What are non equivalent resonance structures?
Non-equivalent resonance structures are structures that have the same arrangement of atoms but different arrangements of electrons.
Non-equivalent resonance are also known as resonance contributors or resonance forms. In other words, non-equivalent resonance structures have the same skeleton but differ in the placement of the electrons.
For example, consider the molecule NO2. It has two non-equivalent resonance structures:
Structure 1: O=N-O-
Structure 2: O--N=O
Both structures have the same arrangement of atoms (N-O-O), but the electrons are arranged differently. In Structure 1, the double bond is between the N and one of the O atoms, while in Structure 2, the double bond is between the N and the other O atom. These two structures are non-equivalent resonance structures because they have the same skeleton but different arrangements of electrons.
To know more about resonance structure here:
https://brainly.com/question/14826286#
#SPJ11
How does a nuclear fusion work. List the elements involved
Answer: 1. Two protons within the Sun fuse. Most of the time the pair breaks apart again, but sometimes one of the protons transforms into 2.a neutron via a weak nuclear force. Along with the transformation into a neutron, a positron, and neutrino are formed. This resulting proton-neutron pair that forms sometimes is known as deuterium.
3. A third proton collides with the formed deuterium. This collision results in the formation of a helium-3 nucleus and a gamma ray. These gamma rays work their way out from the core of the Sun and are released as sunlight.
4Two helium-3 nuclei collide, creating a helium-4 nucleus plus two extra protons that escape as two hydrogens. Technically, beryllium-6 nuclei form first but are unstable and thus disintegrate into the helium-4 nucleus.
Explanation:
The final helium-4 atom has less mass than the original 4 protons that came together (see E=mc2). Because of this, their combination results in an excess of energy being released in the form of heat and light that exits the Sun, given by the mass-energy equivalence. To exit the Sun, this energy must travel through many layers to the photosphere before it can emerge into space as sunlight. Since this proton-proton chain happens frequently - 9.2 x 1037 times per second - there is a significant release of energy.[3] Of all of the mass that undergoes this fusion process, only about 0.7% of it is turned into energy. Although this seems like a small amount of mass, this is equal to 4.26 million metric tonnes of matter being converted to energy per second.[3] Using the mass-energy equivalence, we find that these 4.26 million metric tonnes of matter are equal to about 3.8 x 1026 joules of energy released per second!
The change of potential due to electrotonic spread will get larger the further away from the starting point it travels. True False
Electrotonic (local) potentials dissipate, which is one of their properties.
What is Electric Potential?The internal charge that an object has and its location with respect to other electrically charged objects are what determine an object's electrical potential energy. The strength of the electric potential is determined by how much effort is needed to move an object across an electric field.
Electric potential energy is the energy that is gained when an object moves against an electric field. By dividing the potential energy by the charge, the electric potential is determined for any charge.
The farther it moves from the initial point, the less the electrotonic spread's change in potential will increase.
To learn more about Electric Potential, here
brainly.com/question/28444459
#SPJ4
an nacl solution is prepared by dissolving 90.0 g nacl in 250.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?
a. 21.21torr
b. 2.354 torr
c. 1.239 torr
d. 19.28 torr
e. 2.140 torr
The vapor pressure of the solution if the vapor pressure of water at 25°C is 18.86 torr.
What is Vapor pressure?It is defined as the pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases. Vapor pressure lowering is the colligative property.
where,
P₀ = Vapor pressure of pure solvent
P' = Vapor pressure of solution
Xm = Mole fraction of solute → Moles of solute / Total moles
Total moles = Moles of solute + moles of solvent
Number of moles:
It is given by dividing mass over molar mass.
90.0 g / 58.45 g/mol = 1.5398 moles NaCl
250 g / 18 g/mol = 13.89 moles H₂O
Total moles → 1.5398 + 13.89 moles = 15.43 moles
∴ Mole fraction of solute = 1.5398 / 15.43 = 0.0998
thus, i → NaCl ⇒ Na⁺ + Cl⁻
∴ i = 2 (Van't Hoff factor, number of ions dissolved)
On substituting the values in equation (i):
23.56 torr - P' = 23.56 × 0.0998 ×2
or, P' = 18.86 torr
Thus, the vapor pressure of the solution is 18.86 torr.
Find more information about vapour pressure here:
https://brainly.com/question/4463307
#SPJ1
what is the ultimate source of the electrons that are transferred during the light-dependent reactions of photosynthesis?
The light reaction is known as the first stage of photosynthesis process. The ultimate source of electrons that are transferred during the light-dependent reactions of photosynthesis is water.
What is light dependent reaction?The light dependent reaction is also called the photolysis in which solar energy is converted into chemical energy in the form of ATP and NADPH. This reaction generally occurs in the grana of chloroplasts.
The ultimate source of electrons supplied to the photosynthesis reaction is water. The light energy from the sun is generally used for the splitting of water into oxygen, electrons and 4H⁺ ions.
Thus the ultimate source of the electrons in light-dependent reactions of photosynthesis is water.
To know more about photosynthesis, visit;
https://brainly.com/question/29764662
#SPJ1
I’m a process called electrolysis an electric current passed through water causes hydrogen gas and oxegyn gas to be evolved the unbalanced reaction below shows the process
2H20(1)-> 2H2(g)+O2(g)
If a 0.75 mol sample of water is electrolyzed until all the liquid water is gone what volume of oxygen gas is produced at 100c and 1 atm
R=0.08206L * atm/mol * K
0.75 mol of water electrolysis produces a volume of 0.06155 L of oxygen gas at 100°C and 1 atm.
What do you mean by electrolysis?Electrolysis is a chemical process in which an electric current is passed through a substance to bring about a chemical change. In this process, a direct electric current is used to drive a non-spontaneous chemical reaction.
The most common example of electrolysis is the splitting of water molecules into hydrogen and oxygen gas. When an electric current is passed through water, hydrogen ions (H+) are attracted to the cathode, and oxygen ions (OH-) are attracted to the anode. These ions then combine at the electrodes to form hydrogen gas (H2) and oxygen gas (O2), respectively.
In the electrolysis of water, a 0.75 mol sample of water produces 0.75 mol of oxygen gas (O2(g)).
To find the volume of oxygen gas produced, we can use the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature in Kelvin.
Given the temperature of 100°C and the pressure of 1 atm, we can convert the temperature to Kelvin and calculate the volume as follows:
T = 100°C + 273 = 373 K
V = nRT/P = 0.75 mol * 0.08206 L * atm/mol * K / 1 atm = 0.06155 L
So, 0.75 mol of water electrolysis produces a volume of 0.06155 L of oxygen gas at 100°C and 1 atm.
To know more about temperature visit:
https://brainly.com/question/15267055
#SPJ1
As this reaction takes place at higher temperatures, it is observed that the equilibrium shifts to the product side. The reaction may be written as follows:.
The equilibrium is shown to shift to the product side when this reaction proceeds at increasing temperatures. The response could be formatted as follows: 2AB₂ + heat A₂ + 4B.
What is meant by Le Chatelier's principle?The guiding idea of Le Chatelier is as follows: A shift in the location of the equilibrium results from a change in one of the variables that characterise a system in equilibrium and cancels out the effects of that change.
Le Chatelier's principle states that there will typically be a net reaction that lessens the impact of a change in pressure, temperature, or the number of moles of a component in an equilibrium system.
The reaction is likely to be:
2AB₂ + heat → A₂ + 4B
This is due to Le Chatelier's principle, which asserts that an equilibrium reaction will veer to the side that opposes the change injected into the system. Thus, if the addition of heat favours the products, the reaction is endothermic.
Therefore, the correct answer is option b) 2AB₂ + heat A₂ + 4B.
The complete question is:
As this reaction takes place at higher temperatures, it is observed that the equilibrium shifts to the product side. The reaction may be written as follows:
a) 2AB₂ A₂ + 4B + heat
b) 2AB₂ + heat A₂ + 4B
c) A₂ + 4B 2AB + heat
d) 2A + B4 4A₂ B + heat
To learn more about Le Chatelier's principle refer to:
https://brainly.com/question/9191469
#SPJ4
Based on their available oxidation states, rank the following metals on their ability to catalyze this and other oxidation-reduction reactions.
Rank from best to worst catalyst
vanadium. manganese, titanium
On the basis of oxidation states,ranking of metals to catalyze oxidation-reduction reactions is - manganese, vanadium and titanium.
In science, the oxidation state, or oxidation number, is the speculative charge of an iota in the event that its bonds to various particles were all completely ionic. It depicts the level of oxidation (loss of electrons) of a particle in a substance compound. Reasonably, the oxidation state might be positive, negative or zero. While completely ionic bonds are not found in nature, many bonds areas of strength for show, making oxidation express a valuable indicator of charge.
The oxidation state of an atom doesn't address the "genuine" charge on that particle, or some other real nuclear property. This is especially valid for high oxidation states, where the ionization energy expected to create a duplicate positive particle is far more prominent than the energies accessible in synthetic responses.
Since,manganese exist in oxidation state from +2 to +7,so it is more reactive.Same with vanadium and titanium also,vandium have oxidation state from +2 to +4 whereas titanium exist in +3 oxidation state only.
To know more about oxidation states,visit here:
https://brainly.com/question/28793261
#SPJ4
what is the role of detergent, ethanol, and salt in the extraction process?
Detergent, ethanol, and salt can all play important roles in extraction processes, depending on the specific type of biomolecule being extracted and the purification needs.
Detergent, ethanol, and salt can all play important roles in different types of extraction processes. Here's an overview of how each of them can be used:
Detergent: Detergents are often used to extract proteins or other biomolecules from biological samples. Detergents are able to solubilize membrane-bound proteins by disrupting the lipid bilayer of the cell membrane. This allows the proteins to be extracted into a solution. Detergents can also help to break apart protein complexes, making it easier to isolate individual proteins.
Ethanol: Ethanol is commonly used as a solvent in extractions because it can dissolve a wide range of organic compounds, including lipids and proteins. Ethanol can also be used to precipitate DNA or RNA from a solution. When added to a solution of DNA or RNA, ethanol causes the nucleic acids to clump together and form a visible precipitate, which can then be collected and further purified.
Salt: Salt is often used in DNA and RNA extractions to help remove proteins and other impurities from the sample. When salt is added to a solution, it can cause proteins to denature and precipitate out of the solution. The salt can then be removed along with the precipitated proteins. In addition, salt can help to bind DNA or RNA to a solid support, such as a column or a membrane, making it easier to isolate the nucleic acid from other components of the sample.
In summary, detergent, ethanol, and salt can all play important roles in extraction processes, depending on the specific type of biomolecule being extracted and the purification needs. Detergents are useful for solubilizing proteins, ethanol can dissolve a wide range of organic compounds, and salt can help to remove impurities and bind DNA or RNA to a solid support.
To know more about ethanol please refer: https://brainly.com/question/25002448
#SPJ4
Use the scenario to answer the question. PLEASE HELP ME GOD
I PAY YOU 20 POINTS
The National Weather Service issued the following weather forecast.
“Strong, hot, dry winds are expected to move through the local area.”
Which action would local fire officials most likely take as a result of this weather forecast?
Answer: i would think if it’s strong hot dry winds it could cause a fire (depending on area) so everybody would have to evacuate
Explanation: hope it helps^^
A compound contains 57. 54% c, 3. 45% h, and 39. 01% f. What is its empirical formula?.
The empirical formula for this compound is C₄H₃O₂. This states that each C₄H₃O₂ molecule consists of 4 C atoms, 3 H atoms, and 2 O atoms.
Empirical formula
The empirical formula is a term about the simplest whole number ratio of atoms in a compound. To find out the empirical formula for the compound, you can use the following steps:
Step 1: Calculate the mass content of each element for a 100-gram molecule.
57,54 % C x 100 gram = [tex]\frac{57,54}{100}[/tex] C x 100 gram = 57,54 gram C
4,45 % H x 100 gram = [tex]\frac{3,45}{100}[/tex] C x 100 gram = 3,45 gram H
39,01 % O x 100 gram = [tex]\frac{39,01}{100}[/tex] C x 100 gram = 39,01 gram O
Step 2: Calculate the moles of each element using the formula moles = atomic mass / relative atomic mass.
Moles of C = [tex]\frac{57,54 gram}{12 gram/mol}[/tex] = 4,795 mol
Moles of H = [tex]\frac{3,45 gram}{1 gram/mol}[/tex] = 3,45 mol
Moles of O = [tex]\frac{39,01 gram}{16 gram/mol}[/tex] = 2,44 mol
Step 3: Calculate the mole ratio.
C : H : O
4,795 : 3,45 : 2,44
2 : 1,5 : 1
4 : 3 : 2
So the empirical formula for the molecule is C₄H₃O₂.
Learn more about empirical formulas here: https://brainly.com/question/13058832
#SPJ1
What is difference between furanose and pyranose?
The hemiacetal forms when a hydroxyl group along the carbon chain reaches back and bonds to the electrophilic carbonyl carbon. As a result, five- and six-membered rings are very common in sugars. Five-membered rings are called "furanoses" and six-membered rings are called "pyranoses".
One significant class of biological molecules is carbohydrates. Although they are best known for storing energy as glucose and starch, carbohydrates also serve a variety of other functions. For instance, they provide structural support for DNA's DNA backbone. By creating molecular codes on the surfaces of cells that distinguish between our own cells and invaders, they support homebody security and defense operations. They transport specialized chemical reagents into enzymes, which carry out reactions vital to life. They're sweet in some cases.
know more about difference between furanose and pyranose click here;
https://brainly.com/question/13265197
#SPJ4
which chemical agent causes victims to develop blisters on their skin?
The chemical agent that can cause victims to develop blisters on their skin is a type of chemical weapon called a vesicant or blister agent.
Examples of blister agents include sulfur mustard, lewisite, and phosgene oxime. These agents cause damage to the skin and other tissues by forming a covalent bond with cellular components, leading to severe blistering and tissue damage. They are extremely toxic and can cause long-lasting health effects, making them a serious threat to human health and safety.
You can learn more about blister agent at
https://brainly.com/question/4392773
#SPJ4
select all the characteristics that apply to an atomic orbital.
An atomic orbital is a mathematical function that describes the probability distribution of finding an electron in an atom.
The following are the characteristics of an atomic orbital:
Probabilistic: An atomic orbital describes the probability of finding an electron at a particular point in space, rather than its exact location.
Three-dimensional: Atomic orbitals are three-dimensional functions that describe the electron distribution in all directions.
Energy level: Atomic orbitals are associated with specific energy levels, and the energy level determines the size and shape of the orbital.
Quantized: The energy levels and electron distributions in atomic orbitals are quantized, meaning that they can only have certain discrete values.
Electron cloud: Atomic orbitals can be thought of as an electron cloud, which describes the probability of finding an electron at any point within the orbital.
To learn more about Atomic orbital :
https://brainly.com/question/29561958
#SPJ4
using equation explain what happens when hydrogen peroxide is added to lead
The reaction equation is PbS+4H2O2→PbSO4+4H2O
What is the reaction of lead sulfide and hydrogen peroxide?This is a redox reaction where the hydrogen peroxide (H2O2) acts as an oxidizing agent, and the lead sulfide (PbS) is oxidized to form lead sulfate (PbSO4). The hydrogen peroxide is reduced to form water (H2O). The reaction produces a white precipitate of lead sulfate, which is insoluble in water and can be easily separated from the reaction mixture.
It is worth noting that the reaction between lead sulfide and hydrogen peroxide may not occur spontaneously, and a catalyst may be needed to initiate the reaction.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
Missing parts;
using equation explain what happens when hydrogen peroxide is added to lead sulfide
What is the molecular geometry of NF3?
The molecular geometry of NF3 is trigonal pyramidal.
This is determined by the number of electron groups around the central atom, nitrogen (N). NF3 has four electron groups (three bonding pairs from the fluorine atoms and one lone pair on the nitrogen), which makes it fall under the category of tetrahedral electron geometry. However, because one of the electron groups is a lone pair, the molecular geometry is actually trigonal pyramidal.
The lone pair of electrons pushes the bonding pairs closer together, causing the bond angles to be slightly less than the typical 109.5 degrees in a tetrahedral structure. The resulting shape is a pyramid with a triangular base, hence the name "trigonal pyramidal."
The molecular geometry of NF3 is trigonal pyramidal due to the presence of four electron groups (three bonding pairs and one lone pair) around the central nitrogen atom.
To know more about molecular geometry here:
https://brainly.com/question/7558603#
#SPJ11
what does GHS stand for
In 2003, the United Nations (UN) adopted the Globally Harmonized System of Classification and Labeling of Chemicals (GHS)
In 2003, the United Nations (UN) adopted the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). The GHS includes criteria for the classification of health, physical and environmental hazards, as well as specifying what information should be included on labels of hazardous chemicals as well as safety data sheets. The United States was an active participant in the development of the GHS, and is a member of the UN bodies established to maintain and coordinate implementation of the system. The official text of the GHS can be found on the UN web page.
know more about GHS click here;
https://brainly.com/question/27053015
#SPJ4
How many liters of oxygen are required to react completely with 54 L of nitrogen monoxide?
please I need help I'm dying
Who discovered the electrons travel in energy level?
In 1913, Niels Bohr proposed a theory for the hydrogen atom based on the premise that some physical quantities can only have discrete values.
What is an electrons travel?From the negative end of the wire to the positive end, electrons flow. The resistor slows the flow of electrons by using the energy of the electrons around the wire. One approach to create electric current is with a battery. Inside the battery, chemical activities take place.From the negative terminal to the positive terminal, electrons flow. Conventional current, sometimes known as just current, functions as though positive charge carriers are what drive current flow. Normal current moves from the positive terminal to the negative.In actuality, electrons in direct current (DC) electrical circuits move relatively slowly. The charge (or electrons) moves from the positive terminal to the negative terminal as a result of the "electrical pressure" brought on by the voltage differential between the positive and negative terminals of a battery.To learn more about electrons travel refer to:
https://brainly.com/question/23962839
#SPJ4
Question 7 of 15
In the equation Q = mcΔT, c represents
OA. the thermal energy
B. the mass of the substance being heated
C. the specific heat of the substance being heated
D. temperature measured in °C
SUBMIT
Answer:
c = the specific heat capacity of the substance, (J/kg•⁰C)
not sure which one is the answer, i will just tell you the definition.
Explanation:
Write the noble gas configuration for the following IONS.
20. Ba2+
21. Ag¹+
In which list can all particles be accelerated by an electric field?
1) Alpha, beta, and neutrons.
2) Alpha, protons, and neutrons.
3) Alpha, beta, and protons.
4) Beta, protons, and neutrons
Alpha, beta, and protons can all particles be accelerated by an electric field. Therefore, option 3 is correct.
What is an electric field ?The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field. It also refers to the physical field of a charged particle system.
Particle acceleration is a straightforward concept: an electric field moves a charged particle from one location to another. Because electric fields do not act on neutral particles, they can only accelerate electrons, protons, ions, and various antiparticles.
Thus, option 3 is correct.
To learn more about the electric field, follow the link;
https://brainly.com/question/15800304
#SPJ9
Bleach is made to be pseudo-zero-order in this experiment. What does this mean? A. Bleach will speed up the rate of reaction as it gets more concentrated in solutionB. Bleach will be omitted from the reaction so it will not have an effect on rate C. Bleach will not affect the rate of the reaction between solutions O D. Bleach will slow down the rate of reaction as it gets more concentrated in solution
The reaction rate between solutions O won't be impacted by bleach (optio c). Practically speaking, a fairly specific per-iod marks the start of the reactants' phase of the "chemical reaction."
What does a solution example entail?Rubber alcohol, salt water, and sugar dissolved in water are a few examples of solutions. When mixing salt and water, the salt particles become so small that they are no longer visible with the nak-ed eye, indicating that the mixture is homogenous.
In chemistry, what does the word "solution" mean?A continuous variation in the relative proportions of two or more substances that is homogeneous and can be changed up to the solubility limit. Although the word "solution" is typically used to describe the liquid state of matter, it is also possible for gases and solids to form solutions.
To know more about Solutions visit:
https://brainly.com/question/1416865
#SPJ1
What is charge of sulfate?
The charge of sulfate is -2.
Sulfate is a polyatomic ion with the chemical formula SO₄²⁻. This means that it is composed of one sulfur atom (S) and four oxygen atoms (O), and has a total charge of -2.
This charge is important to consider when creating chemical compounds with sulfate, as it will affect the overall charge of the compound.
For example, when sulfate combines with a positively charged ion, such as sodium (Na⁺), it will form a neutral compound, sodium sulfate (Na₂SO₄). The charges of the individual ions (2⁺ for sodium and -2 for sulfate) will cancel each other out, resulting in a compound with no overall charge.
To know more about sulfate here:
https://brainly.com/question/4117459#
#SPJ11
please can someone help me
The both can be separated by adding water to the mixture.
How can you separate diamonds from sugar?Diamonds and sugar are two very different substances, and it is relatively easy to separate them from each other using physical and chemical methods.
One common method to separate diamonds from sugar is by using their different physical properties. Diamonds have a much higher density than sugar, so if you mix a sample of both substances in water, the diamonds will sink to the bottom while the sugar will float on top and dissolve in the water. This is known as gravity separation.
Learn more about diamond:https://brainly.com/question/29775108
#SPJ1