Which one of the following cannot form a solid with a lattice based on the sodium chloride structure? A) NaBr. B) LiF. C) RbI. D) CuO. E) CuCl2.

Answer:

Explanation:

In an oxidation-reduction (redox) reaction, electrons are transferred from one substance to another. There are two key components that are essential in a redox reaction:

An oxidizing agent (or oxidant): This is the substance that accepts electrons and becomes reduced during the reaction. The oxidizing agent is responsible for causing oxidation in the other substance involved in the reaction.

A reducing agent (or reductant): This is the substance that donates electrons and becomes oxidized during the reaction. The reducing agent is responsible for causing reduction in the other substance involved in the reaction.

In a redox reaction, the reducing agent is oxidized and loses electrons, while the oxidizing agent is reduced and gains electrons. The transfer of electrons from one substance to another is what drives the reaction and leads to the formation of new products.

For example, consider the reaction between magnesium metal (Mg) and oxygen gas (O2) to form magnesium oxide (MgO):

2Mg + O2 → 2MgO

In this reaction, magnesium metal is oxidized (loses electrons) and oxygen gas is reduced (gains electrons). Magnesium is the reducing agent, while oxygen is the oxidizing agent.

Urea is the primary nitrogenous byproduct of protein breakdown in all mammals as well as certain fishes. Therefore, 1.81×10²¹atoms are present.

Urea, commonly known as carbamide, is a carbonic acid diamide. It has the formula H2NCONH2. Urea is used as a fertilizer as well as feed additive, as well as a beginning ingredient in the production of polymers and pharmaceuticals. It is a colorless, crystalline chemical that dissolves at 132.7 degrees Celsius (271 degrees Fahrenheit) and decomposes after boiling.

Urea is the primary nitrogenous byproduct of protein breakdown in all mammals as well as certain fishes. The substance is found not just in all animals' urine, but also mammalian blood, bile, milk, as well as sweat.

mole =given mass /molar mass

     =2×453.6g/60.06

    =907.2/60.06

    = 15.10

atoms of nitrogen = 2×15.10 × 6.022×10²³=1.81×10²¹atoms

Therefore, 1.81×10²¹atoms are present.

To learn more about urea, here:

https://brainly.com/question/14811017

#SPJ1

To construct the solubility curve, we must first determine the maximum amount of Ce2(SO4)3 that can dissolve in 100 grams of water at 10°C, which is approximately 20 grams.

To find the mole fraction of the solute in a solution of 4 m CaCl2, we need to first calculate the moles of CaCl2 present in 1 kg (1000 g) of the solution:

moles of CaCl2 = molality x mass of solvent (in kg)

= 4 mol/kg x 1 kg

= 4 mol

Next, we need to find the total moles of solute and solvent in the solution:

moles of solute = 4 mol

moles of solvent = mass of solvent (in g) / molar mass of solvent

= 1000 g / 18.015 g/mol (molar mass of water)

= 55.49 mol

Therefore, the total moles of solute and solvent in the solution is:

total moles = moles of solute + moles of solvent

= 4 mol + 55.49 mol

= 59.49 mol

Finally, we can calculate the mole fraction of the solute:

mole fraction of solute = moles of solute / total moles

= 4 mol / 59.49 mol

= 0.0672

Therefore, the mole fraction of the solute in a 4 m CaCl2 solution is 0.0672.

To calculate the molality of an ethylene glycol solution with a molarity of 2.87 M, we need to use the formula:

molality = moles of solute/mass of solvent (in kg)

We can find the moles of solute by multiplying the molarity by the volume of the solution in liters:

moles of solute = molarity x volume (in L)

= 2.87 mol/L x 1 L

= 2.87 mol

We can find the mass of the solvent by using the density of the solution:

mass of solvent = volume of solution x density

= 1 L x 1.04 g/mL

= 1040 g

Converting the mass of the solution

a. 25 grams: This is a supersaturated solution because 25 g is more than the maximum amount of Ce2(SO4)3 that can dissolve in 100 grams of water at 10°C.

b. 10 g: Because 10 g is less than the maximum amount of Ce2(SO4)3 that can dissolve in 100 g of water at 10°C, this solution is saturated.

c. 5 g  Because 5g is less than 10g, this is an unsaturated solution.

As a result, the answers are: a. supersaturated, b. saturated, and c. unsaturated.

To know more about saturated visit:-

https://brainly.com/question/28215821

#SPJ4

There are more particles (including particles in the gas state) in the reactants than in the product, thus ΔSrxn<0. Because ΔH is large and negative, the reaction will be thermodynamically favorable at low temperatures explain whether or not  reaction is thermodynamically favorable. THe correct answer is A.

The reactants include more particles (including particles in the gaseous state) than the product, therefore ΔSrxn<0.  The reaction will be thermodynamically advantageous at low temperatures since H is big and negative.

ΔS<0. Because  ΔG=ΔH−TΔS<0 is the need for a process to be thermodynamically advantageous, ΔG must be negative for -TS to be substantially lower than ΔH in size. At low temperatures, this will be accurate.

Your question is incomplete but most probably your full question was

  4Fe(s)   +   3O2(g)   ⇋    2Fe2 O3(s) ΔH = −1,650 kJ/molrxn  

The oxidation of Fe(s) is represented by the chemical equation above. Which of the  following correctly explains whether or not the reaction is thermodynamically favorable?

A There are more particles (including particles in the gas state) in the reactants than     in the product, thus ΔSrxn < 0 . Because ΔH is large and negative, the reaction will be    thermodynamically favorable at low temperatures.

B There are more particles (including particles in the gas state) in the reactants than   in the product, thus ΔSrxn < 0. Because ΔH is large and negative, the reaction will   not be thermodynamically favorable at any temperature.

C There are more particles (including particles in the gas state) in the reactants than   in the product, thus ΔSrxn > 0. Because ΔH is large and negative, the reaction will be    thermodynamically favorable at all temperatures.

D There are more particles (including particles in the gas state) in the reactants than in    the product, thus ΔSrxn > 0. Because ΔH is large and negative, the reaction will   not be thermodynamically favorable at any temperature

Learn more about thermodynamic at https://brainly.com/question/13669873

#SPJ4

a. The dissolution process is endothermic.The entropy of solution is likely highly positive.the temperature of the solution quickly drops.

Endothermic is a type of chemical process in which energy is absorbed from the surroundings in order to cause a reaction. A common example of an endothermic reaction is the dissolution of anhydrous ammonia in water. When this happens, the reaction absorbs energy from the surrounding environment in the form of heat. This is because the ammonia molecules need to break apart in order to dissolve in the water. It is also possible for reactions to be endothermic without the need to absorb heat; in this case, the reaction absorbs energy from the environment in the form of light or electricity. Endothermic reactions can be used to create energy efficient products such as insulation, air conditioners, and refrigerators. In addition, endothermic reactions are used in many industrial processes.

To learn more about endothermic

https://brainly.com/question/6506846

#SPJ4

The volume of the solution is 2600 L

The first step is to determine how much solute you need to dissolve in the solvent. This will depend on the desired concentration of the solution and the volume of solvent you plan to use then measure the amount of solute needed for the solution. Be sure to use the correct units of measurement.

We know that;

Number of moles of the NaCl = 30.2 g/58.5 g/mol

= 0.52 moles

Now;

Number of Moles = Concentration * volume

Volume = Number of moles/Concentration

= 0.52 moles/0.200 M

= 2.6 L or 2600 mL

Learn more about volume:https://brainly.com/question/1578538

#SPJ1

The given statement is true. Superficial fascia refers to the fatty hypodermis below the skin.

The lamina propria of mucous membranes is created by areolar connective tissue. In contrast to the deep fascia, which are the sheets of tissue that wrap around muscles, big blood arteries, etc., the superficial fascia is the fatty hypodermis beneath the skin. The hypodermis contains a sizable portion of the body's fat tissue.

Directly beneath the epidermis and the topmost adipose layers is the superficial fascia. It can exhibit stratification both macroscopically and grossly. It is typically defined as consisting of loosely packed interwoven collagen and elastic fibers in membranous layers.

Bones, muscles, nerves, and blood arteries are encircled by deep fascia. Compared to the other kinds, it frequently has a more fibrous nature and is rich in hyaluronan.

To know more about hypodermis

https://brainly.com/question/22328846

#SPJ4

The number of grams of carbon in 25g of carbondioxide is 6.82g.

The mass of an element in a compound can be calculated by dividing the atomic mass of the element by the molar mass of the compound multiplied by the mass of the compound.

According to this question, there are 25g of carbondioxide. The mass of carbon in this compound can be calculated as follows:

Mass of carbon = 12/44 × 25

Mass of C = 6.82g

Learn more about mass at: https://brainly.com/question/16386473

#SPJ1

The moles of Cl atoms in 0.0395 g of C₂H₄Cl₂ is  1.28 x10⁻⁴ There are two chlorine atoms in a mole of chlorine. since chlorine has two atoms.

1 mole of C₂H₄Cl₂ has 2 Cl atoms per 99g, or x moles,

                                    n = (0.0649/99).

You would get the number of Cl atoms in 0.0649 g of C₂H₄Cl₂ by multiplying by 2x.

First, find the molecular weight of C₂H₄Cl₂.  Look up in your chemistry book the atomic weights in g/mole of C, H, and Cl.  The molecular weight is

                                  2(C) + 4(H) + 2(Cl).

Dividing  the given mass of C₂H₄Cl₂ by the molecular weight.  Which  gives the number of moles of C₂H₄Cl₂.

Finally, we have to multiply the number of moles of C₂H₄Cl₂ by 2 to get required number of moles of Cl atoms.

The mole is the amount of a system's substance that is equal to the number of elementary entities in 0.012 kilograms of carbon 12; Mol is its symbol. A mole is the amount of a substance that has the same number of discrete entities (like atoms, molecules, and ions) as a sample of pure 12C that weighs exactly 12 g.

Learn more about Moles :

brainly.com/question/15356425

#SPJ1

The best option would be that If the half-life is 1 000 years, then the time when 7/8 of nuclei have decayed and 1/8 are remaining is approximately 2,000 years.

Radioactivity is the phenomenon in which an atomic nucleus undergoes spontaneous decay, emitting particles and radiation in the process. This results in the emission of alpha particles (helium nuclei), beta particles (electrons), and gamma rays (high-energy photons), which can be harmful to living things.

The decay process is caused by an unstable ratio of protons to neutrons in the nucleus, leading to the emission of particles and radiation until a more stable configuration is reached.

Read more on radioactivity here:https://brainly.com/question/1236735

#SPJ1

The reaction is a substitution reaction of a chlorobenzene with bromine in the presence of iron(III) bromide (FeBr3) as a catalyst. The two major products in this reaction are ortho-brominated and para-brominated derivatives of the chlorobenzene.

The structures of these two products can be represented as follows:

Ortho-brominated product and Para-brominated product.

It's worth noting that the ortho- and para-brominating of chlorobenzene is a two-step reaction. First, the iron(III) bromide catalyst reacts with bromine to form iron(III) bromide hexahydrate (FeBr3•6H2O), which acts as a source of electrophilic bromine. The electrophilic bromine then reacts with the chlorobenzene to form the ortho- and para-brominated derivatives.

To know more about benzene ring with a chloro substituent, visit the link given below:

https://brainly.com/question/27075196

#SPJ4

The work done here  on throwing the ball straight upwards to a height of 4 m is the change in its potential energy. Hence, here the change in potential energy is 6.66 J.

Work done is a physical quantity that measures the how much the force is effective in making a displacement. Hence it is the product of force and displacement.

The work done in bringing an object from one place to the other is called its potential energy. Here, the work done on throwing the ball straight upwards tp a height of 4 m is equal to its potential energy at this height.

Potential energy = mgh

g = 9.8 m/s²

m = 0.170 kg

h = 4 m

p =  9.8 m/s² × 4 m × 0.170 kg = 6.66 J.

Therefore, the work done in throwing the ball is 6.66 J.

Find more on work done:

https://brainly.com/question/13662169

#SPJ9

Answer: Nitrogen, Oxygen, Argon, Helium and Neon are elements.

Explanation:

The main components of air are:

Nitrogen (78%)

Oxygen (21%)

Carbon dioxide (0. 04%)

Argon (0. 93%)

Trace amounts of helium, neon, methane, hydrogen and water vapour.

Out of all these components here, Nitrogen, Oxygen, Argon, Helium and Neon are elements. We can tell that because element is a chemical substance that cannot be broken down into other substances, and here we can see that unlike methane(CH₄), Carbor dioxide (CO₂) or water vapor(H₂O) , these elements cannot be broken down into anything simpler.

hope that helps...

Answer:

Explanation:

The chemical name for MoO3 is molybdenum trioxide.

Answer:

Explanation:

To determine the empirical formula of binary ionic compounds, we need to balance the charges of the cations and anions.

Zn2+ and Cl-: Since Zn2+ has a charge of 2+ and Cl- has a charge of 1-, we need two Cl- ions to balance the charge. Therefore, the empirical formula is ZnCl2.

Zn2+ and S2-: Since Zn2+ has a charge of 2+ and S2- has a charge of 2-, we only need one of each ion to balance the charge. Therefore, the empirical formula is ZnS.

Au3+ and Cl-: Since Au3+ has a charge of 3+ and Cl- has a charge of 1-, we need three Cl- ions to balance the charge. Therefore, the empirical formula is AuCl3.

Au3+ and S2-: Since Au3+ has a charge of 3+ and S2- has a charge of 2-, we need two S2- ions to balance the charge. Therefore, the empirical formula is Au2S3.

The empirical formulas of the binary ionic compounds formed from Zn2+, Au3+, Cl-, and S2- are ZnCl2, ZnS, AuCl3, and Au2S3.

A 7.90 L container holds a mixture of two gases at 51 °C. The partial pressures of gas A and gas B, respectively, are 0.292 atm and 0.676 atm. If 0.110 mol of a third gas is added with no change in volume or temperature, the total pressure become 1.25atm.

The Ideal Gas Law states that under the same temperature, pressure and volume all gases contain the same number of molecules.The Ideal Gas law not apply when the temperature and pressure are near the point of transubstantiate into a liquid or solid.

Partial pressure of A gas = 0.292atm

Partial pressure of B gas = 0.676atm

Total pressure=(0.292+0.676)atm

= 0.968atm

Volume = 7.90L

Temperature = 324K

Calculate the number of moles as follows:

PV = nRT

0.968 × 7.90 = n 0.0821L × 324

n =  0.968 × 7.90/ 0.0821L × 324

= 7.64 / 26.6

=0.28 mol

Moles of A and B = 0.28mol

Moles of third gas = 0.110mol

Total moles=(0.28+0.110)mol

=0.39mol

Calculate the total pressure as follows:

P(7.90L)=(0.39mol)(0.0821L.atm/mol.K)(324K)

P=(7.90L)

(0.39mol)(0.0821L.atm/mol.K)(310K)

= 1.25atm

Thus, the total pressure become 1.25atm.

To learn more about an ideal gas law, follow the link;

https://brainly.com/question/13821925

#SPJ1

The anode and the cathode reaction is given as : Anode:

2Cl- (aq) → Cl2 (g) + 2e- (oxidation)

Cathode:

Mg2+ (aq) + 2e- → Mg (s) (reduction)

The reaction at the anode and cathode during the electrolysis of magnesium chloride (MgCl2) can be written as follows:

Anode:

2Cl- (aq) → Cl2 (g) + 2e- (oxidation)

Cathode:

Mg2+ (aq) + 2e- → Mg (s) (reduction)

These reactions occur as a result of the movement of ions in the solution towards the electrodes, where they gain or lose electrons, producing the desired products.

Read more on chemical reaction here:https://brainly.com/question/11231920

#SPJ1

The molal concentration of the resulting solution is 0.492 m. The concentration number of moles of solute in one kg of solvent.

It is the measure of the concentration number of moles of solute in one kg of solvent.

To calculate the molal concentration first calculated the mass of,

                             mass = density × volume

Put the values,

m = 1 g/mL   19.7 mL

m = 19.7 g     or

m = 0.0197 kg

Calculate the moles of LiCl:

[tex]n = \frac{0.411 m }{42.395 g} * 1 mol[/tex]

n = 9.69 × [tex]10^{-3}[/tex] moles

So, now the molal concentration,

[tex]m = \frac{9.69 * 10^{-3} mol }{0.0197}[/tex]

m = 0.492

Therefore, the molal concentration of the resulting solution is 0.492 m.

Learn more about molal concentration:

brainly.com/question/26255204

#SPJ4

Answer: C

Explanation:

Covalent bonds are formed when atoms share electrons.

Two hydrogen atoms sharing electrons with one oxygen atom are covalent bonds.

The following molecule that can form hydrogen bonds is acetic acid (A)

Because it is a polar molecule, acetic acid is capable of forming hydrogen bonds with the water molecules in the environment. The hydrogen bonding (H-bonding) that exists between the molecules of acetic acid and water is the most powerful force that is responsible for determining the chemical and physical characteristics of the mixture. In its structure, acetic acid exhibits both a double oxygen-carbon bond as well as a hydrogen atom that is connected to an oxygen atom.

The oxygen atom that is part of the double bond in the acetic acid molecule has the potential to form a hydrogen bond with one of the hydrogen atoms in the water molecule. Two equivalent hydrogen bonds are known to cause acetic acid to form a cyclic dimer. Because of how stable the dimer is, it can even stay in the gas phase.

To learn more about hydrogen bonds, click here:

https://brainly.com/question/28478038

#SPJ4

Compatibility of types of substances based on the description according to the Arrhenius acid-base definition is -A base contains the unit: OH in its formula.

Acid is a substance that when dissolved in water will decompose and produce H+ ions. Examples of acids such as hydrogen chloride (HCl), when dissolved in water will decompose into H+ ions and Cl- ions.

While a base is a substance that when dissolved in water produces OH- ions. An example is the compound sodium hydroxide NaOH which when dissolved will decompose Na+ and OH-. The reaction of a base with an acid will produce a 'salt' compound.

According to the Arrhenius definition, acids and bases are acids as substances that when dissolved in water produce hydronium ions (H+). Meanwhile, a base according to Arrhenius is a substance that can produce hydroxide ions when dissolved in water, or in its formula it is called (OH−).

Learn more about Brønsted-Lowry acid-base differences here :

https://brainly.com/question/28298771

#SPJ4

Depending on the reaction conditions, the reaction between selenium (Se) and sodium (Na) can result in a variety of compounds. However, sodium selenide is a frequently formed product (Na2Se).

Under the right circumstances, sodium (Na) and selenium (Se) can react to generate a variety of products, including sodium selenide (Na2Se) and/or other intermediary compounds. The creation of ionic compounds with various stoichiometries is often the outcome of an electron transfer process between the reactants. Temperature, pressure, concentration, and the presence of catalysts are a few examples of the variables that may have an impact on the reaction rate and product distribution. With a high melting point and black hue, sodium selenide is a solid that is frequently utilised in the production of other selenium compounds. Overall, the reaction of selenium with sodium is a significant procedure for producing compounds containing selenium that have a variety of uses in chemistry, materials science, and industry.

Learn more about selenium (Se) and sodium (Na) here:

https://brainly.com/question/881052

#SPJ4

The term mole concept is used here to determine the mass of hydrogen. The mass of MnO₂ which is 4300g and that of hydrogen is 2.21 g. Thus the correct option is B for question 1 and same B for question 2 .

One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

The molar mass of water is 18.01528 g/mol and the given mass is 445 g.

Then the number of moles is:

445 g/ 18.01528 g/mol = 24.7 mol

In the equation 1 mole of 'H₂O' = 2 mole of 'MnO₂' and the molar mass of MnO₂ is 86.93 g/mol.

Then the mass of MnO₂ produced is:

445 ×1/18.01528 ×2 mol MnO₂/ 1 mol H₂O × 86.93 g/mol / 1 mol H₂O

= 4294.3 g

In scientific notation it is written as 4.3 × 10³ g = 4,300 g.

Thus the correct option is B.

In question 2:

The molar mass of oxygen is 16.00 g/mol and the given mass is 8.75.

Then the number of moles is:

8.75 g / 16.00 g/ mol = 0.546 mol

In the equation 1 mole of 'O' = 4 mole of 'H' and the molar mass of H₂ is 1.00794 g/mol.

Then the mass of H₂ produced is:

8.75 × 1 / 16.00 × 4/1 × 1.00794 / 1 = 2.2048 = 2.21 g.

Thus the correct option is B.

To know more about mole concept, visit;

https://brainly.com/question/19800462

#SPJ1    

Electron capture is the process where the number of protons in a nuclide is decreased while the mass number remains constant.

What is the process of electron capture?

During electron capture, an electron in an atom's inner shell is drawn into the nucleus where it combines with a proton, forming a neutron and a neutrino. The neutrino is ejected from the atom's nucleus. Since an atom loses a proton during electron capture, it changes from one element to another.

What happens to the mass number during electron capture?

Following electron capture, the atomic number is reduced by one, the neutron number is increased by one, and there is no change in mass number.

Why does electron capture decrease atomic number?

When a nucleus captures an electron, a proton changes into a neutron, and an electron-type neutrino is emitted. The atomic number goes down by one unit, accounting for the loss of a proton, and the total number of protons plus neutrons stays unchanged, accounting for the gain of a neutron.

To know more about electron capture:

https://brainly.com/question/11689871

#SPJ4

The correct option is the option (b) .

What is temperature ?

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).

What is pressure ?

The definition of pressure is the amount of force that is exerted to a certain region. It can be calculated mathematically as P=FA, where F is the force applied perpendicular to surface area A. The pascal (Pa), or one newton per square metre (N/m 2), is the accepted unit of pressure..

In a constant volume bomb calorimeter change in temperature is ∆T= 30C and as the volume is constant so change in volume ∆V= 0.

So we have work done= P×∆V= P×0= 0

Where P is the pressure.

Again burning calcium metal with oxygen is an exothermic reaction and heat is released.

So "q= -". And we have according to first law of thermodynamics ," energy can neither be created nor be destroyed" So q= ∆E+ W and W=0

So "q=∆E= -".

Hence, q= - , W=0, ∆E= -

So correct option is option-B

Therefore, The correct option is the option (b) .

Learn more about temperature from the given link.

https://brainly.com/question/25677592

#SPJ4

O2 is the limiting reagent and yields 20.4g of CO2.

Describe limiting reagent

The limiting reactant, also known as the limiting reagent, is the reactant that is used first during a chemical reaction, hence restricting the amount of product that can be produced.

2C₂H₂ + 5O₂   →  4CO₂ + 2H₂O

Quantity of C2H2 moles:

Moles equal mass divided by molar mass.

13.7 g/26.04 g/mol is the number of moles.

= 0.526 mol.

O2 moles are calculated using the formula: moles = mass / molar mass.

18.5 g/32 g/mol = the number of moles

= 0.578 mol

Produced CO2 mass:

Number of moles times molar mass equals mass.

Mass = 0.4622 mol at 44 g/mol

Mass = 20.328 g

To learn more about moles use link below:

https://brainly.com/question/14357742

#SPJ1

The heat required is 2347 J

The heat required for a change of state depends on the substance, the amount of the substance, and the specific change of state involved.

When a substance undergoes a change of state, such as melting or boiling, heat is added or removed to cause the particles in the substance to gain or lose energy and rearrange themselves into a new physical state. The amount of heat required to effect this change is known as the heat of transformation, or the heat of fusion

We know that;

H1 = 25.0 *  0.235 * (962 - 950)

= 70.5 J

H2 = 25 g * 88 J/g

= 2200 J

H3 = 25 * 0.278  * (972 - 962)

=76. 5 J

Then we have that;

70.5 J + 2200 J + 76. 5 J

=2347 J

Learn more about heat:https://brainly.com/question/1429452

#SPJ1

The actual average mass of 1 lithium atom is 6.941 grams/atom this is equal to one mole of lithium.

The fundamental physical property of matter is mass. The atomic mass refers to the mass of an atom or molecule. To calculate the average mass of elements and molecules and to solve stoichiometry problems, the atomic mass is used.

Lithium, for example, has an atomic mass of 6.941 grams, which is equivalent to one mole of lithium. This is why we express atomic and molecular masses in grams per mole, or g/mol.

Thus, The actual average mass of 1 lithium atom is 6.941 grams/atom.

To learn more about the atomic mass, follow the link;

https://brainly.com/question/17067547

#SPJ1