"Lysine and arginine are acidic amino acids" is the right answer.
What is meant by amino acids?The building blocks of proteins, known as amino acids, are carbon, hydrogen, oxygen, nitrogen, and, occasionally, sulphur.
A carboxyl group and one amine group are both present in the amino acids. They are a zwitterion and are amphoteric.
based on the family of amino acids, which can be further classified into a number of different categories, such as simple amino acids and amino acids containing sulphur.
The amino acids that have sulphur atoms and side-by-side chains are those that contain sulphur. Basic amino acids like arginine and lysine have a side chain that is an NH2 basic group.
Therefore, the correct answer is option D) Lysine and arginine are acidic amino acids.
To learn more about amino acids refer to;
https://brainly.com/question/28362783
#SPJ4
Of the following, only _____ is impossible for an ideal gas. a. V1/T1 = V2/T2 b. V1/V2 = T1/T2 = 0 c. V1/T1 = V2/T2 d.V1/v2 = T1/T2 e.V2=T2/T1 X V1
Only Option A, V1/T1 = V2/T2 is impossible for an ideal gas.
Ideal gas, sometimes known as a perfect gas, is a gas that physically complies with the ideal, or general, gas law, a particular idealized relationship between pressure, volume, and temperature. This certain group of gases has a unique set of properties. Ideal gases are considered to occupy negligible volume, and their molecules have no intermolecular forces of attraction.
Charles' Law can be expressed as:
V1/T1 = V2/T2, where volume = V and temperature = T of an ideal gas at constant pressure.
Only option A is not equivalent to Charles' Law expression. The remaining choices all rearrange to the original equation.
To learn more about ideal gas, refer to:
https://brainly.com/question/27870704
#SPJ4
Rank these compounds by their expected boiling point. Highest boiling point Lowest boiling point 1.CH3OH 2. CH4 3. CH3Cl
The expected boiling point ranking of the given compounds is in the order of highest to lowest will be:
• CH3OH
• CH3Cl
• CH4
The boiling point of a compound is influenced by factors such as the strength of intermolecular forces, molecular weight, and branching. Based on these factors, we can rank the given compounds by their expected boiling point:
• CH3OH (methanol) - Methanol has the highest boiling point among the given compounds due to its ability to form strong hydrogen bonds between its molecules. Hydrogen bonding is a strong intermolecular force that requires a significant amount of energy to break, which results in a higher boiling point.
• CH3Cl (chloromethane) - Chloromethane has a lower boiling point than methanol because it only has dipole-dipole interactions and van der Waals forces between its molecules. These intermolecular forces are weaker than hydrogen bonding, so less energy is required to overcome them, resulting in a lower boiling point.
• CH4 (methane) - Methane has the lowest boiling point among the given compounds because it is nonpolar and only has weak van der Waals forces between its molecules. These intermolecular forces are the weakest, requiring the least amount of energy to overcome, which results in the lowest boiling point.
Learn more about boiling point here:
https://brainly.com/question/28203474
#SPJ4
The ranking of these compounds by boiling point is:
1. CH3OH (Methanol)
2. CH3Cl (Chloromethane)
3. CH4 (Methane)
1. CH3OH (Methanol) - Boiling Point: 65°C
Methanol (CH3OH) is a colorless and flammable liquid that is the simplest alcohol, with a molecular formula of CH3OH. It is used in antifreeze, as a solvent, and as a fuel. It has a boiling point of 65.0 °C.
2. CH3Cl (Chloromethane) - Boiling Point: -24.3°C
Chloromethane (CH3Cl) is a colorless, flammable gas with a sweet odor. It is used as a solvent and a refrigerant, and has a molecular formula of CH3Cl. It has a boiling point of -24.2 °C.
3.CH4 (Methane) - Boiling Point: -161.5°C
Methane (CH4) is a colorless and odorless gas that is the main component of natural gas. It has the chemical formula CH4 and is the simplest hydrocarbon. It is used as a fuel for heating and cooking, and has a boiling point of -164.0 °C.
learn more about Chloromethane Refer:brainly.com/question/15106628
#SPJ4
Mercury has a very high surface tension. Would capillary action occur if you insert a thin tube into a pool of mercury? Assume the cohesive forces in mercury are greater than the adhesive forces with the tube.A) Yes, capillary action will draw the mercury up into the tube.B) No, capillary action only occurs if cohesive forces are less than adhesive forces.C) Yes, capillary action will draw the mercury up the outside of the tube.D) Yes, capillary action will pull the mercury down in the tube.
The correct answer is B) No, capillary action only occurs if cohesive forces are less than adhesive forces. Capillary action is a result of the interplay between cohesive forces and adhesive forces.
Cohesive forces are the attractive forces between molecules of the same substance, while adhesive forces are the attractive forces between molecules of different substances. For capillary action to occur, the adhesive forces between the tube and the liquid must be greater than the cohesive forces within the liquid. However, in the case of mercury, the cohesive forces are much greater than the adhesive forces, so capillary action would not occur. Therefore, inserting a thin tube into a pool of mercury would not cause the mercury to be drawn up into the tube.
Find more about capillary action
brainly.com/question/18558140
#SPJ4
Identify each category of substance as soluble or insoluble in water.Most carbonate and phosphate salts blankMost halide (Br-, Cl-, and I-) salts blankMost silver salts blanksalts of group 1 elements blankMost nitrate salts blank
The majority of carbonate and phosphate salts are water insoluble. The majority of halide salts (Br-, Cl-, and I-) are water soluble. The majority of silver salts are water insoluble. Group 1 element salts are water soluble. The majority of nitrate salts are water soluble.
Why is CO3 called carbonate?Carbonate is the term given to the material with the chemical formula CO3. Carbonate has an electric charge of 2 and is composed of 1 carbon atom and 3 oxygen atoms. Due to its negative charge, carbonate contains 2 more electrons than protons in each of its individual ions. The organic molecule with the carbonate group C(O-)2, known as a carbonate ester, may also be referred to as a carbonate.
Is carbonate a base or acid?A moderately powerful base is carbonates. Since the carbonate anion can take an ion of hydrogen from water, aqueous solutions are basic. CO32 + H2O -> HCO3 + OH Gaseous carbon dioxide, water, and metal salts are created when carbonates and acids interact. Infusing carbon dioxide gas under pressure into water results in carbonated water. This creates sparkling water, club soda, soda water, seltzer water, and fizzy water, which are all terms for the frothy beverage that is the result. Unless it's seltzer water, salt is typically added to carbonated fluids to enhance flavor.
To know more about Carbonate visit:
https://brainly.com/question/29167877
#SPJ4
With regard to tonicity, two solutions that have the same concentrations of nondiffusible solutes and water are said to be?
Any external solution that contains the same amounts of solutes or water as biological fluids is seen to be isotonic. The flow of water inside an isotonic solution won't be net.
Which fatty acids are present in nature Mcq most frequently?The 16- or 18-carbon fatty acids, also known as palmitic acid or stearic acid, respectively, are among the most widely dispersed fatty acids. The bulk of organisms' lipids contain both and stearic acids. In animals, up to 30% of body fat is made up of palmitic acid.
What is the fatty acid's Mcq solubility in water?Water only partially dissolves fatty acids. The hydrophilic COOH group just at end of the hydrocarbon chain is what causes the partial solubility. The hydrocarbon chains cannot be dissolved at all in water.
To know more about solution visit:
https://brainly.com/question/7932885
A molecule becomes more oxidized when it __________.Achanges shapeBgains a hydrogen (H+) ionCloses a hydrogen (H+) ionDgains an electronEloses an electron
A molecule will becomes more oxidized when it loses an electron. Option E is correct.
Oxidation will be defined as the loss of the electrons, which results in an increase in the oxidation state or the number of an atom, ion, or molecule. Conversely, reduction is defined as the gain of electrons, which results in a decrease in the oxidation state or number.
When a molecule gains a hydrogen ion, it does not necessarily become more oxidized or reduced; it may simply become more acidic. Similarly, closing or losing a hydrogen ion does not necessarily change in the oxidation state of a molecule.
Hence, E. loses an electron is the correct option.
To know more about Oxidation here
https://brainly.com/question/13182308
#SPJ4
what is the capital m in chemistry?
Answer:
Molar
Explanation:
Molar is a term for concentration of a substance. It is defined as moles/liter. 1.85M would mean the concentration of a solute is 1.85 moles of that substance (solute) per 1 liter of solution (solvent). 1.85M NaOH tells us that the liquid in the beaker in front of you has 1.85 moles of NaOH per 1 liter of solvent (typically water). There may be differing amounts of solution, but in all cases the concentration of NaOH will be the same. To make a 1.0 M solution of aqueous NaOH, take 1 molar mass of NaOH (1 mole), which is 40 grams of solid NaOH, and add enough water to make it 1 liter. That is a soultion with 1 mole per liter. For 500ml, take 1/2 the NaOH, or 20g, and add water to the 500ml (0.5L) mark.
How does a nuclear fusion work. List the elements involved
Answer: 1. Two protons within the Sun fuse. Most of the time the pair breaks apart again, but sometimes one of the protons transforms into 2.a neutron via a weak nuclear force. Along with the transformation into a neutron, a positron, and neutrino are formed. This resulting proton-neutron pair that forms sometimes is known as deuterium.
3. A third proton collides with the formed deuterium. This collision results in the formation of a helium-3 nucleus and a gamma ray. These gamma rays work their way out from the core of the Sun and are released as sunlight.
4Two helium-3 nuclei collide, creating a helium-4 nucleus plus two extra protons that escape as two hydrogens. Technically, beryllium-6 nuclei form first but are unstable and thus disintegrate into the helium-4 nucleus.
Explanation:
The final helium-4 atom has less mass than the original 4 protons that came together (see E=mc2). Because of this, their combination results in an excess of energy being released in the form of heat and light that exits the Sun, given by the mass-energy equivalence. To exit the Sun, this energy must travel through many layers to the photosphere before it can emerge into space as sunlight. Since this proton-proton chain happens frequently - 9.2 x 1037 times per second - there is a significant release of energy.[3] Of all of the mass that undergoes this fusion process, only about 0.7% of it is turned into energy. Although this seems like a small amount of mass, this is equal to 4.26 million metric tonnes of matter being converted to energy per second.[3] Using the mass-energy equivalence, we find that these 4.26 million metric tonnes of matter are equal to about 3.8 x 1026 joules of energy released per second!
Who discovered the electrons travel in energy level?
In 1913, Niels Bohr proposed a theory for the hydrogen atom based on the premise that some physical quantities can only have discrete values.
What is an electrons travel?From the negative end of the wire to the positive end, electrons flow. The resistor slows the flow of electrons by using the energy of the electrons around the wire. One approach to create electric current is with a battery. Inside the battery, chemical activities take place.From the negative terminal to the positive terminal, electrons flow. Conventional current, sometimes known as just current, functions as though positive charge carriers are what drive current flow. Normal current moves from the positive terminal to the negative.In actuality, electrons in direct current (DC) electrical circuits move relatively slowly. The charge (or electrons) moves from the positive terminal to the negative terminal as a result of the "electrical pressure" brought on by the voltage differential between the positive and negative terminals of a battery.To learn more about electrons travel refer to:
https://brainly.com/question/23962839
#SPJ4
classify these structures as hemiacetal acetal or other.Hemiacetal Acetal Other
Hemiacetals and acetals are types of organic compounds that contain a carbon atom bonded to both an oxygen atom and an -OR (alkoxy) group. The classification of a structure as hemiacetal, acetal, or other depends on the functional groups present and their bonding arrangement.
Hemiacetals are compounds that contain a hydroxyl (-OH) group and an alkoxy (-OR) group bonded to the same carbon atom. They are formed by the reaction of an aldehyde or ketone with an alcohol.
Acetals are compounds that contain two alkoxy (-OR) groups bonded to the same carbon atom. They are formed by the reaction of an aldehyde or ketone with two alcohol molecules.
Structures that do not contain a hydroxyl (-OH) or alkoxy (-OR) group bonded to a common carbon atom cannot be classified as hemiacetals or acetals. These may include aldehydes, ketones, alcohols, ethers, esters, and other organic compounds. Therefore, the classification of a structure as "other" would depend on its specific functional group composition and bonding arrangement.
To learn more about Hemiacetal Acetal refer to:
https://brainly.com/question/2384794
#SPJ4
What is the PH of H3O?
The pH of the 0.0001 M [H₃O⁺] is 4.
In the aqueous solutions, the H₃O⁺ is the strongest acid and the OH⁻ is the strongest base and that can be exist in the equilibrium with H₂O. The pH scale ranges from the 0 to 14. The acids have the pH value ranges from the less than 7 and the pH for the base is greater than the 7. The solution that is the pH value of the 7 is the neutral.
The pH value of [H₃O⁺] can be calculated by the equation as follows :
pH = - log [H₃O⁺]
[H₃O⁺] = 0.0001 M = 10⁻⁴ M
pH = - log [ 10⁻⁴ ]
pH = 4
To learn more about pH here
https://brainly.com/question/15289741
#SPJ4
This question is incomplete, the complete question is :
What is the PH of 0.0001 M H₃O⁺ ion ?
Be sure to answer all parts.The equilibrium constant (Kc) for the formation of nitrosyl chloride, an orange-yellow compound, from nitric oxide and molecular chlorine.
2NO(g) + Cl2(g) ⇌ 2NOCl(g)
is 4 × 105 at a certain temperature. In an experiment, 9.20 × 10−2 mole of NO, 3.80 × 10−3 mole of Cl2, and 3.80 moles of NOCl are mixed in a 3.20−L flask.
What is Qc for the experiment?
____ × 10 ^__ (Enter answer in scientific notation.)
In which direction will the system proceed to reach equilibrium?
The reaction will proceed to the right.
The reaction is at equilibrium.
The reaction will proceed to the left.
PLS I NEED THIS ASAP
The equilibrium constant (Kc) for the formation of nitrosyl chloride from nitric oxide and molecular chlorine is 6.5×104 6.5 × 10 4 at 35 degrees Celsius.
What is chlorine used for?Its most important use is as a bleach in the manufacture of paper and cloth, but it is also used to make pesticides (insect killers), rubber, and solvents. Chlorine is used in drinking water and swimming pool water to kill harmful bacteria.
Is chlorine harmful to human health?Exposure to low levels of chlorine can result in nose, throat, and eye irritation. At higher levels, breathing chlorine gas may result in changes in breathing rate and coughing, and damage to the lungs. Additional symptoms of exposure to chlorine can be severe.
To know more about chlorine visit
https://brainly.com/question/14962130
#SPJ1
As this reaction takes place at higher temperatures, it is observed that the equilibrium shifts to the product side. The reaction may be written as follows:.
The equilibrium is shown to shift to the product side when this reaction proceeds at increasing temperatures. The response could be formatted as follows: 2AB₂ + heat A₂ + 4B.
What is meant by Le Chatelier's principle?The guiding idea of Le Chatelier is as follows: A shift in the location of the equilibrium results from a change in one of the variables that characterise a system in equilibrium and cancels out the effects of that change.
Le Chatelier's principle states that there will typically be a net reaction that lessens the impact of a change in pressure, temperature, or the number of moles of a component in an equilibrium system.
The reaction is likely to be:
2AB₂ + heat → A₂ + 4B
This is due to Le Chatelier's principle, which asserts that an equilibrium reaction will veer to the side that opposes the change injected into the system. Thus, if the addition of heat favours the products, the reaction is endothermic.
Therefore, the correct answer is option b) 2AB₂ + heat A₂ + 4B.
The complete question is:
As this reaction takes place at higher temperatures, it is observed that the equilibrium shifts to the product side. The reaction may be written as follows:
a) 2AB₂ A₂ + 4B + heat
b) 2AB₂ + heat A₂ + 4B
c) A₂ + 4B 2AB + heat
d) 2A + B4 4A₂ B + heat
To learn more about Le Chatelier's principle refer to:
https://brainly.com/question/9191469
#SPJ4
please can someone help me
The both can be separated by adding water to the mixture.
How can you separate diamonds from sugar?Diamonds and sugar are two very different substances, and it is relatively easy to separate them from each other using physical and chemical methods.
One common method to separate diamonds from sugar is by using their different physical properties. Diamonds have a much higher density than sugar, so if you mix a sample of both substances in water, the diamonds will sink to the bottom while the sugar will float on top and dissolve in the water. This is known as gravity separation.
Learn more about diamond:https://brainly.com/question/29775108
#SPJ1
1. Write the following elements in order of increasing atomic
radius:
Francium, Rubidium, Sodium, Lithium
Answer: Lithium, Sodium, Rubidium, and Francium
Explanation:
If 201 g Fe2O3 is reacted with excess CO, what mass of CO2 will be produced? Fe2O3(s) + 3CO(g) → 3CO2(g) + 2Fe(s)
We can start by using stoichiometry to find the amount of CO2 produced from the given amount of Fe2O3. The balanced chemical equation is:
Fe2O3(s) + 3CO(g) → 3CO2(g) + 2Fe(s)
What is Stoichiometry?
Stoichiometry is the branch of chemistry that deals with the calculation of the quantitative relationships between reactants and products in chemical reactions. It is based on the We can start by using stoichiometry to find the amount of CO2 produced from the given amount of Fe2O3. The balanced chemical equation is:
Fe2O3(s) + 3CO(g) → 3CO2(g) + 2Fe(s)
From the equation, we can see that 1 mole of Fe2O3 reacts with 3 moles of CO to produce 3 moles of CO2. We can use this information to set up a conversion factor to calculate the amount of CO2 produced:
1 mol Fe2O3 / 159.69 g Fe2O3 x 3 mol CO2 / 1 mol Fe2O3 x 28.01 g CO2 / 1 mol CO2 = 168.76 g CO2
So, if 201 g Fe2O3 is reacted with excess CO, 168.76 g CO2 will be produced.
, which states that in a chemical reaction, the total mass of the products must be equal to the total mass of the reactants.
In stoichiometry, balanced chemical equations are used to relate the moles of reactants and products in a chemical reaction. By knowing the amount of one substance, it is possible to calculate the amount of another substance in the reaction, using the stoichiometric coefficients in the balanced equation as conversion factors.
Fe2O3(s) + 3CO(g) → 3CO2(g) + 2Fe(s)
From the equation, we can see that 1 mole of Fe2O3 reacts with 3 moles of CO to produce 3 moles of CO2. We can use this information to set up a conversion factor to calculate the amount of CO2 produced:
1 mol Fe2O3 / 159.69 g Fe2O3 x 3 mol CO2 / 1 mol Fe2O3 x 28.01 g CO2 / 1 mol CO2 = 168.76 g CO2
So, if 201 g Fe2O3 is reacted with excess CO, 168.76 g CO2 will be produced.
Learn more about Stoichiometry from given link
https://brainly.com/question/14935523
#SPJ4
Fe + FeCl₂ → FeCl₂
pleaee can someon help me
The balanced equation would be 2Fe + 2FeCl₂ → 3FeCl₂.
Balancing chemical equationsA balanced chemical equation should have the same number of atoms of each element on both sides of the equation. The equation should also follow the law of conservation of mass.
Therefore, the balanced equation for Fe + FeCl₂ → FeCl₂ would be:
2Fe + 2FeCl₂ → 3FeCl₂.
This equation is balanced because the number of atoms of each element is the same on both sides of the equation. Thus, it obeys the law of conservation of mass.
More on balancing chemical equations can be found here: https://brainly.com/question/28294176
#SPJ1
Balance the following chemical equation: Fe + FeCl₂ → FeCl₂
DO NOW: According to table D, which of the following students describe the concentration of an
aqueous solution? (Check all that apply)
□Kodjo measures 75 grams of KCI(s).
□ Jade measures 1.5 liters of KCl(aq).
Aahil measures 75 ppm of Fe²(aq).
Precious measures 1.5 M of FeCl₂(aq).
0 Brandon measures 75 moles of KNO3(s).
☐
Though the table is missing but the following can describe the concentration of an aqueous solution;
Aahil measures 75 ppm of Fe²+(aq)
Precious measures 1.5 M of FeCl₂(aq)
How do you describe concentration of aqueous solution?The concentration of an aqueous solution refers to the amount of solute (the substance being dissolved) present in a given volume or mass of solvent (usually water). There are several ways to express the concentration of an aqueous solution, including:
Molarity: Molarity is the number of moles of solute per liter of solution. It is expressed in units of moles per liter (M).
Molality: Molality is the number of moles of solute per kilogram of solvent. It is expressed in units of moles per kilogram (m).
Mass Percentage: Mass percentage is the mass of solute present in a given mass of solution, expressed as a percentage.
Volume Percentage: Volume percentage is the volume of solute present in a given volume of solution, expressed as a percentage.
Parts per Million (ppm): Parts per million is the number of parts of solute per million parts of solution. It is a unit commonly used to express very low concentrations, especially in the context of environmental chemistry.
Learn more about aqueous solution:https://brainly.com/question/26856926
#SPJ1
The variation of the boiling points of the hydrogen halides is in the order HF>HI>HBr>HCl
What explains the higher boiling point of hydrogen fluoride?
A.There is strong hydrogen bonding between HF molecules.
B.The bond energy of HF molecules is greater than in other hydrogen halides.
C.The effect of nuclear shielding is much reduced in fluorine which polarises the HF molecule.
D.The electronegativity of fluorine is much higher than for other elements in the group.
The higher boiling point of hydrogen fluoride is because there is strong hydrogen bonding between HF molecules. The correct alternative is option A.
The boiling points of the hydrogen halides are in the order HF > HI > HBr > HCl. This is because the boiling point of a compound is determined by the strength of the intermolecular forces between its molecules.
In the case of hydrogen fluoride (HF), there is strong hydrogen bonding between the HF molecules. This strong hydrogen bonding results in a higher boiling point for HF compared to the other hydrogen halides, which do not have as strong intermolecular forces between their molecules.
It is important to note that the other options are not correct explanations for the higher boiling point of HF. Option B, "The bond energy of HF molecules is greater than in other hydrogen halides," is incorrect because bond energy refers to the energy required to break a bond between atoms in a molecule, not the intermolecular forces between molecules.
Option C, "The effect of nuclear shielding is much reduced in fluorine which polarizes the HF molecule," is incorrect because nuclear shielding refers to the ability of inner shell electrons to shield the nucleus from outer shell electrons, not the intermolecular forces between molecules.
Option D, "The electronegativity of fluorine is much higher than for other elements in the group," is incorrect because electronegativity refers to the ability of an atom to attract electrons to itself, not the intermolecular forces between molecules.
TO know more about boiling point here:
https://brainly.com/question/2153588#
#SPJ11
how to write lewis structure ch2o?
The lewis structure of the CH₂O is as follows :
: O :
||
H : C : H
The Hydrogen is the Group I element with the only one electron in its outermost shell. The Oxygen is the Group VI element with the six electrons in its outermost shell. The Carbon is the element of the Group IV element with the four electrons in its outermost shell. In the lewis structure of the CH₂O the total valence electrons are 12 valence electrons.
The total number of the valence electrons in the carbon is four. The total number of the valence electrons in the oxygen is six. The total number of the valence electrons in the hydrogen is one.
To learn more about lewis structure here
https://brainly.com/question/20300458
#SPJ4
explain the atomic radius trend periodic table?
On general basis in modern periodic table, the atomic radius decreases as we move from left to right in a period and it increases when we go down a group.
Trend-wise in modern periodic table, as we moves from left to right across a period in the modern periodic table, the ionization energy increases due to the increase in nuclear charge which results in the decrease of atomic size. Again, the decrease in the atomic size results in a more potent force of attraction between the electrons and the nucleus.
As we move down the group in the modern periodic table there is an increase in the atomic size due to the addition of an extra shell.
Learn more about atomic size from the link given below.
https://brainly.com/question/1127028
#SPJ4
Use the scenario to answer the question. PLEASE HELP ME GOD
I PAY YOU 20 POINTS
The National Weather Service issued the following weather forecast.
“Strong, hot, dry winds are expected to move through the local area.”
Which action would local fire officials most likely take as a result of this weather forecast?
Answer: i would think if it’s strong hot dry winds it could cause a fire (depending on area) so everybody would have to evacuate
Explanation: hope it helps^^
Select all of the following that are components of nucleotides. a. nitrogen-containing base b. hydrocarbon tail attached to a polar head c. glycerol d. sugar e. phosphorus-containing groups
Answer:
A and E
Explanation:
with Adenine ,thymine , cytosine and guanine
What is the molar mass of Pb(No3)2?
The molar mass of Pb(NO₃)₂ is approximately 331.2 g/mol.
To calculate the molar mass of Pb(NO₃)₂ (lead(II) nitrate), we need to find the atomic masses of each element in the compound and then add them up based on the molecular formula.
The atomic mass of lead (Pb) is 207.2 g/mol, nitrogen (N) is 14.01 g/mol, oxygen (O) is 16.00 g/mol, and the atomic mass of nitrogen and three oxygen atoms in the nitrate ion (NO₃⁻) is (1 x 14.01 g/mol) + (3 x 16.00 g/mol) = 62.01 g/mol.
The molar mass of Pb(NO₃)₂ can be calculated as follows:
Molar mass of Pb(NO₃)₂ = (1 x atomic mass of Pb) + (2 x atomic mass of NO3-)
Molar mass of Pb(NO₃)₂ = (1 x 207.2 g/mol) + (2 x 62.01 g/mol)
Molar mass of Pb(NO₃)₂ = 331.2 g/mol
To know more about molar mass here
https://brainly.com/question/13152455
#SPJ4
What is abg practice questions ?
ABG practice questions are a type of medical question that is commonly used to test the knowledge and understanding of healthcare professionals.
ABG stands for arterial blood gas, and these questions are designed to help healthcare professionals practice interpreting and understanding the results of arterial blood gas tests. These tests are used to measure the levels of oxygen, carbon dioxide, and other gases in the blood, and are important for diagnosing and treating a variety of medical conditions.
ABG practice questions typically include a scenario or case study, along with a set of ABG results. The healthcare professional is then asked to interpret the results and make a diagnosis or recommend a course of treatment. These questions are an important tool for helping healthcare professionals develop the skills and knowledge they need to provide high-quality care to their patients.
To know more about arterial blood gas here:
https://brainly.com/question/30063687#
#SPJ11
A compound contains 57. 54% c, 3. 45% h, and 39. 01% f. What is its empirical formula?.
The empirical formula for this compound is C₄H₃O₂. This states that each C₄H₃O₂ molecule consists of 4 C atoms, 3 H atoms, and 2 O atoms.
Empirical formula
The empirical formula is a term about the simplest whole number ratio of atoms in a compound. To find out the empirical formula for the compound, you can use the following steps:
Step 1: Calculate the mass content of each element for a 100-gram molecule.
57,54 % C x 100 gram = [tex]\frac{57,54}{100}[/tex] C x 100 gram = 57,54 gram C
4,45 % H x 100 gram = [tex]\frac{3,45}{100}[/tex] C x 100 gram = 3,45 gram H
39,01 % O x 100 gram = [tex]\frac{39,01}{100}[/tex] C x 100 gram = 39,01 gram O
Step 2: Calculate the moles of each element using the formula moles = atomic mass / relative atomic mass.
Moles of C = [tex]\frac{57,54 gram}{12 gram/mol}[/tex] = 4,795 mol
Moles of H = [tex]\frac{3,45 gram}{1 gram/mol}[/tex] = 3,45 mol
Moles of O = [tex]\frac{39,01 gram}{16 gram/mol}[/tex] = 2,44 mol
Step 3: Calculate the mole ratio.
C : H : O
4,795 : 3,45 : 2,44
2 : 1,5 : 1
4 : 3 : 2
So the empirical formula for the molecule is C₄H₃O₂.
Learn more about empirical formulas here: https://brainly.com/question/13058832
#SPJ1
What is charge of sulfate?
The charge of sulfate is -2.
Sulfate is a polyatomic ion with the chemical formula SO₄²⁻. This means that it is composed of one sulfur atom (S) and four oxygen atoms (O), and has a total charge of -2.
This charge is important to consider when creating chemical compounds with sulfate, as it will affect the overall charge of the compound.
For example, when sulfate combines with a positively charged ion, such as sodium (Na⁺), it will form a neutral compound, sodium sulfate (Na₂SO₄). The charges of the individual ions (2⁺ for sodium and -2 for sulfate) will cancel each other out, resulting in a compound with no overall charge.
To know more about sulfate here:
https://brainly.com/question/4117459#
#SPJ11
What are non equivalent resonance structures?
Non-equivalent resonance structures are structures that have the same arrangement of atoms but different arrangements of electrons.
Non-equivalent resonance are also known as resonance contributors or resonance forms. In other words, non-equivalent resonance structures have the same skeleton but differ in the placement of the electrons.
For example, consider the molecule NO2. It has two non-equivalent resonance structures:
Structure 1: O=N-O-
Structure 2: O--N=O
Both structures have the same arrangement of atoms (N-O-O), but the electrons are arranged differently. In Structure 1, the double bond is between the N and one of the O atoms, while in Structure 2, the double bond is between the N and the other O atom. These two structures are non-equivalent resonance structures because they have the same skeleton but different arrangements of electrons.
To know more about resonance structure here:
https://brainly.com/question/14826286#
#SPJ11
What is the name of SrSiO3?
The name of SrSiO3 is strontium metasilicate. It is also known as strontium salt.
Strontium metasilicate is used as phosphors due to its special structural features and excellent physical and chemical stability. This salt is conventionally synthesized through solid state reaction method, sol-gel method, solution combustion method, microwave-assisted sintering. The strontium metasilicate are used in flares and fireworks for a crimson color. It is used in toothpaste for sensitive teeth. The strontium metasilicate salt is used to improve the quality of pottery glazes. The isotope of the strontium salt is one of the best long-lived, high-energy beta emitters.
To learn more about Strontium Salt please visit:
https://brainly.com/question/30609371
#SPJ4
can anyone tell me how to graph this? lol
The graph to be plotted is a linear regression graph of volume on the y-axis against pressure on the x-axis.
How can the linear regression graph of volume against pressure be plotted?To plot a linear regression graph of volume against pressure, you will need a set of data that includes measurements of both pressure and volume.
Once you have the data, you can follow these steps:
Plot the data points on a graph, with pressure on the x-axis and volume on the y-axis.Inspect the scatterplot to see if there appears to be a linear relationship between pressure and volume. If the data points appear to fall along a straight line, a linear regression analysis may be appropriate.Use a regression analysis tool to calculate the equation of the line of best fit. Plot the line of best fit on the graph, using the slope and intercept values. Label the axes of the graph with units and include a title that describes the relationship between pressure and volume.Interpret the slope of the lineCalculate the correlation coefficient, n.Learn more about linear regression graphs at: https://brainly.com/question/29202957
#SPJ1