Answer:
nickel, cobalt would decrease in size when it became an iron
What causes the
differences in physical characteristics like hair color among people?
1. diferent versions of genes
2. variations in DNA length
3. different numbers of chromosomes
4. variations in cell nucleus size
Answer:
b
Explanation:
i took the test
Why are small quantities of chlorofluorocarbons so harmful to the ozone layer? a. The chlorofluorocarbons act like ultraviolet radiation causing large amount of ozone to be produced. b. The chlorine from the chlorofluorocarbons reacts with free molecules of oxygen causing a stop in ozone production. c. Free oxygen atoms can replace the chlorine in chlorine monoxide, releasing a free atom of chlorine which can then recombine with an oxygen atom in ozone, destroying more ozone. d. Chlorofluorocarbons absorb ultraviolet radiation, preventing the formation of ozone.
Answer:
Why are small quantities of chlorofluorocarbons so harmful to the ozone layer? Free oxygen atoms can replace the chlorine in chlorine monoxide, releasing a free atom of chlorine which can then recombine with an oxygen atom in ozone, destroying more ozone.
Explanation:
The statement for small quantities of chlorofluorocarbons so harmful to the ozone layer is "Free oxygen atoms can replace the chlorine in chlorine monoxide, releasing a free atom of chlorine which can then recombine with an oxygen atom in ozone, destroying more ozone."
What is ozone layer?The ozone layer is a thin layer of air in the Earth's atmosphere that absorbs nearly all of the sun's damaging UV radiation.
What is CFCs?CFCs (chlorofluorocarbons) are harmless and nonflammable compounds made up of carbon, chlorine, and fluorine atoms.
The earth's protective ozone layer is destroyed by chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and halons, which shield the earth from damaging ultraviolet (UV-B) rays released by the sun. CFCs and HCFCs also warm the earth's lower atmosphere, causing global climate change.
When some substances are exposed to high UV radiation in the stratosphere, they emit chlorine or bromine. Ozone-depleting chemicals are compounds that contribute to ozone depletion (ODS). Chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), carbon tetrachloride, and methyl chloroform are examples of ODS that produce chlorine. Halons and methyl bromide are two ODS that emit bromine.
Because there isn't much ozone in the atmosphere, what little there is is critical for protecting the Earth's surface from excessive UV light from the Sun. It turns out that it reacts with chlorine, which means that chlorine effectively eliminates ozone.
When the chlorine in CFCs combines with ultraviolet light, it releases chlorine, which then reacts with ozone, reducing the protection humans get from ultraviolet light, allowing more CFCs to release chlorine, and so on. Multiple ozone molecules will interact with one free chlorine atom, which is free because UV light has hit the CFC molecule. As a result, the damage it can cause is likely to be significantly more than you might imagine.
Hence the correct option is c.
Learn more about ozone layer and CFCs here
https://brainly.com/question/14330630
#SPJ2
Chromium-48 decays. After 6 half-lives, what fraction of the original nuclei
would remain?
Answer:
The fraction of original nuclei remaining is 1.5625
Explanation:
Which of the following presents the steps of the engineering process in the correct order?
1.Identify a need, make a plan know the background, do the work, test the results, evaluate and redesign
O
2. dentify a need, know the background, do the work, make a plan, evaluate and redesign, test the results
3. Know the background, identify a need, make a plan, evaluate and redesign, do the work, test the results
4.Identify a need, know the background, make a plan, do the work, test the results, evaluate and redesign
Answer:
4
Explanation:
I got it right
The engineering process in the correct order "Identify a need, know the background, make a plan, do the work, test the results, evaluate and redesign"
What is engineering process?At an industrial level, process engineering is just the understanding as well as application of fundamental natural principles and laws that allow people to transform raw materials along with energy into products that seem to be beneficial to society.
What is redesign?Redesign, in terms of building, is the procedure of finding a solution to such a project. this includes then writing instructions that allow such a solution to be built.
The engineering process in the correct order "Identify a need, know the background, make a plan, do the work, test the results, evaluate and redesign"
To know more about engineering process and redesign
https://brainly.com/question/10175918
#SPJ2
Answer question number 4
Answer: Choice A
Explanation:
what is the mass of a 7.91 cm cubed piece of lead having a density of 11.34 g/cm cubed
Answer:
The answer is 89.70 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
density = 11.34 g/cm³
volume = 7.91 cm³
We have
mass = 11.34 × 7.91 = 89.6994
We have the final answer as
89.70 gHope this helps you
Describe the relationship between an element and a compound.
Answer:
An element is a material that consist of a single type of atom . each atom type contains same number of protons . chemical bonds link elements to form more complex molecules called compound A compound consist of two or more elements held together by covalent or ionic bonds.
are you clear?
Mr. Hackworth toasts a marshmallow over a fire. The outside of the marshmallow turns black, a new substance with new properties is created on the outside of the marshmallow, and the marshmallow gives off an odor. What type of change occured?
A
Physical, because color is a physical property.
B
Physical, because a new substance was created, smell, and color change.
C
Chemical, because a new substance was created, smell, and color change.
D
Chemical, because color is a chemical property.
Answer:
C
Explanation:
This is a chemical property because a catalyst is added(fire). Without a catalyst a marshmallow would stay a marshmallow. The sugar caramelizes(this is not physical because sugar is burning)
Requires a medium to travel (travel fastest through solid-like metal train tracks A Waves B Sound Waves C Light Waves D matter
Answer:
b
Explanation:
becuase of sound waves
How many electrons are there in the only energy level of helium, a noble gas? * Two Three Six Eight
Answer:
Explanation:
Noble gases are the least reactive of all known elements. That's because with eight valence electrons, their outer energy levels are full. The only exception is helium, which has just two electrons.
marine science flvs 2.03
can someone please send the answers for this!!!
Answer:
101
Explanation:
Answer:
Explanation:
The substances that get rid of carbamates and organophosphates are?
Answer: Alfracon
...............................
At every depth, soil composition remains the same.
O
True
O False
Answer:
false
Explanation:
Hope the answer was usefull for us
Answer:
false. there is the surface soil, which has a lot of partly decayed stuff, topsoil, which has minerals and organic material, subsoil, which is made from sand, silt, and clay that hasn't been broken down, and parent material, which is the place where not much living things live in, except for gigantic tree roots. then there is the bedrock, which is; you guessed it:rock entirely.
Explanation:
Type the correct answer in each box.
Which chemical symbols will complete the equation for this single displacement reaction?
2NaBr + Cl2 → 2 __ __ + __ 2
Answer:
2Naci+Br2
Explanation:
i hope it is help full
Answer:
Na//Cl//Br
Explanation:
How many meters is a 50 yards olympic size swimming pool?
Answer:
An official Olympic Sized pool is 50 meters long by 25 meters wide.
Explanation:
Why does an ion have a charge
Help please:)
Answer:
An ion is charged because the number of electrons does not equal the amount of particles.
Explanation:
Can be positive (meaning more protons than electrons) and it can be negatively charged (meaning there are more electrons than protons).
Hope this helps!
Answer:
An ion has a charge because the number of electrons dont equal the amount of protons in the molecule or atom.
Explanation:
The negative or positive charge depend on wether the atom or molecule has more electrons(-) or protons(+).
how to check atomic mass?
Answer:
There are multiple ways to check mass but I'll tell you one. Look below
Explanation:
One easy way of checking atomic mass is by adding protons and neutrons.
For example:
We have 5 protons and 4 neutrons.
5+4=9
I hope this helps (:
WHOEVER ANSWERS THIS QUESTION FIRST WILL GET BRAINLIEST!!
PLEASE HURRY!!!
Select 5 elements that form ions in an isoelectronic series with the noble gas Argon. Support your claim with evidence and scientific reasoning.
Answer:
Explanation:
An orange falls off of a display at a store and rolls 5 meters in 2.5 seconds. What is the average speed of the orange?
An orange falls off of a display at a store and rolls 5 meters in 2.5 seconds the average speed of the orange will be 2 meters per second.
What is speed?Speed if the rate of change of position of an object in a given time of interval or per unit time of interval and it is the ratio of distance traveled to the time taken and the unit will be meter per second.
The average speed of the orange will be if the orange falls off of a display at a store and rolls 5 meters in 2.5 seconds,
Speed = distance / time
Substituting the value,
speed =5 meters /2.5 seconds
speed = 2 meters per second.
Therefore, the average speed of the orange will be 2 meters per second if, the orange falls off of a display at a store and rolls 5 meters in 2.5 seconds.
Learn more about speed, here:
https://brainly.com/question/8011798
#SPJ2
What occurs to the particles in a fluid during convection ?
Answer: what are options
Explanation:
Element X has two natural isotopes. The isotope with a mass of 10.012 amu (10X) has a relative abundance of 19.91%. The isotope with a mass of 11.009 ammu (11X) has a relative abundance of 80.09%. Calculate the atomic mass of this element.
Answer:
10.81
Explanation:
you can see the answer at the pic
What do we call the bond that forms when atoms share two pairs of electrons
(I have a test tomorrow and I'm doing a review right now but have no idea what the answer to this is.)
How many neutrons make up one of these potassium atoms?
Answer:
20
Explanation:
Explain what happens if the nucleus, of an atom, becomes unstable.
Answer:The unstable nucleus of radioactive atoms emit radiation. When this occurs, a new atom and element are formed. This process is called radioactive decay. It continues until the forces in the unstable nucleus are balanced.
Explanation:
According to Dalton’s atomic theory, what are elements and what makes one element different from another?
Dalton was a chemist who discovered the “law of multiple proportion” in chemical reaction in early nineteenth century. For example, element of tin, he observed, interacted with oxygen to produce two different masses but in proportion 1:2. (Now, this is known to correspond to the formation of tin-monoxide and tin-dioxide, with one and two atoms of oxygen, respectively.)
From such and related studies, he proposed his theory of chemical elements: (a) that all elements are composed of ‘atoms’, the hypothetical indivisible constituents of matter of the ancient Greek thinkers, like, Democritus, and (b) that the elements differ from one another due to the atoms of different masses and sizes that constitute an element.
The modern theory of chemistry says that an element consists of an atom that consists of a heavy nucleus with positively charged ‘protons’ (and most often also the neutral particles called ‘neutrons’) at its center and, an equal number of negatively charged (and much lighter) ‘electrons’, distributed around it in discrete energy shells. Further, the elements differ from one another by the number of positively charged protons in their nucleus, the so-called atomic number, Z, of an atom. Finally, molecules are formed as well as chemical reactions take place, through the exchange or transfer of the electron(s) in the outermost shells of the reacting atoms (and/or molecules).
PLS ANSWER!! ASAP!!! 10 POINTS!!
Why are metals in Group 1A so reactive?
A. These metals need one electron to complete their outer shell.
B. These metals need two electrons to complete their outer shell.
C. These metals have one electron in their outer shell.
D. These metals have two electrons in their outer shell.
Answer:
the answer is = a. these materials...
The metals of Group 1A are so reactive because these metals have one electron in their outer shell. Therefore, option (C) is correct.
What are the metals of Group 1A?The elements of Group 1A of the periodic table are also called alkali metals. The seven elements of group 1 A include hydrogen(H), lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr).
These are low-melting, extremely reactive, glossy metals that oxidize when exposed to air. When dissolved in water, these metals or their oxides produce a basic solution. Because of their high reactivity, alkali metals are instead found as ionic compounds (except hydrogen).
The general electronic configuration of the alkali metals is ns¹. As they lose one electron from their valence shell they acquire the nearest noble gas configuration, therefore they are very reactive.
The alkali metals are all lustrous, soft, and extremely reactive metals at normal temperature and pressure that quickly lose their valence electrons to create cations with charge +1.
Learn more about metals of Group 1A, here:
https://brainly.com/question/27751926
#SPJ2
A cube of metal has a mass of 5.05 x 10°g and its density is known to be 12.77 g/mL, what is the volume of this metal?
A 395.5 mL
B. 2.529 mL
C. 63,910 mL
D. 64.48 ml
Answer:
Explanation:
option A is correct
In this chemical formula: 3NH4 (ammonium) This chemical formula means there are 3 _____________ ___________, and 4 __________ ________ in each molecule.
Answer:
hope it helped you
Explanation:
3 atoms of nitrogen and 4 atoms of hydrogen in each molecule
The chemical formula 3NH4 means there are 3 atoms of nitrogen and 4 atoms of hydrogen in each molecule.
What are chemical reaction?Chemical reaction is defined as a process in which one or more substances, the reactants, are converted into one or more different substances, the products.
A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.
There are five main types of reactions.
Combination reaction - A combination reaction is a reaction in which two or more substance combine to form a single new substance also known as synthesis reaction.Decomposition reaction - A decomposition reaction is a reaction in which a compounds break down into two or more simpler substance.Single replacement reaction - A single replacement reaction is a reaction in which one element replaces a similar element in a compound.Double replacement reaction - A double replacement reaction is a reaction in which the positive or negative ions of to ionic compounds exchange places from two new compound.Combustion reaction - A combustion reaction is a reaction in which a substance reacts with oxygen gas, releasing energy in the form of heat and light.Thus, the chemical formula 3NH4 means there are 3 atoms of nitrogen and 4 atoms of hydrogen in each molecule.
To learn more about chemical reaction, refer to the link below:
https://brainly.com/question/3461108
#SPJ2
Which best explains the formation of polyester?
a condensation polymerization of a carboxylic acid and an alcohol
an addition polymerization of a carboxylic acid and an alcohol
a condensation polymerization of two alcohols
an addition polymerization of two alcohols
Answer:
The correct answer is - a condensation polymerization of a carboxylic acid and an alcohol
Explanation:
Condensation polymerization is a type of polymerization that forms a byproduct by the bonding of two different types of monomers during polymerization.
Polyester is an example of condensation polymerization which is formed by the polymerization of carboxylic acid and an alcohol monomer. In addition polymerization, there is only one type of monomers bond together.
Answer:
A. a condensation polymerization of a carboxylic acid and an alcohol
Explanation:
how many atoms in a chair
Answer:
100 trillion atoms are in one cell and so just find how many cells are in a chair and then take 100xthe number and you get your answer
Explanation:
There are uncountable atoms which are present in a chair depending on it's size.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/30898688
#SPJ2