Facilitates communication between the processor, memory, and peripheral devices of the following BEST describes the chipset.
A chipset is a group of specialized chips found on the motherboard or an expansion card of a computer. The NEAT chipset, created by Chips and Technologies for the Intel 80286 CPU, was the first chipset for personal computers. It was used in 1984 with the IBM PC AT.
In the 1980s and 1990s, the word "chipset" was used to describe the unique audio and graphics chips found in personal computers, video game consoles, and arcade gaming hardware. Examples include the Original Chip Set for the Commodore Amiga and the System 16 chipset from SEGA.
The northbridge and southbridge are a particular pair of motherboard chips that are frequently referred to as a "chipset." The southbridge connects to slower peripheral buses, while the northbridge connects the CPU to very fast peripherals, particularly RAM and graphics controllers (such as PCI or ISA). The southbridge of many contemporary chipsets houses various on-chip integrated peripherals, including Ethernet, USB, and audio devices.
To know more about chipset:
https://brainly.com/question/10227792
#SPJ4
How do you print a number in a for loop?
When something continues to run constantly and is on a loop, the same actions are done repeatedly: The same tunes were played continuously on loop by the tape.
What is loop?When something continues to run constantly and is on a loop, the same actions are done repeatedly: The same tunes were played continuously on loop by the tape. SMART Words and phrases from the same vocabulary. The loop is used to execute the code block several times based on the condition stated in the loop. It entails repeating the same code execution, which helps to save code and navigate through an array's contents. to tell a person of what is going on. If something changes, just let me know.Words that are related and synonyms. giving information or telling someone something.
Pictorial Presentation:
Sample Solution:
C Code: #include <stdio.h> void main() { int i; printf("The first 10 natural numbers are:\n"); for (i=1;i<=10;i++) { printf("%d ",i); } printf("\n"); } ...
Flowchart: ...
C Programming Code Editor:
To learn more about loop refer to:
https://brainly.com/question/26098908
#SPJ4
use the operations push, pop, peek and empty to construct an operation which sets i to the bottom element of the stack, leaving the stack unchanged. (hint: use an auxiliary stack.)
The push, pop, peek, and empty operations can be used with the helper stack to push the variable "i" to the bottom of the original stack and leave the original stack alone.
How can it be done?This is how it can be done:
Create a helper stack to store the elements of the original stack.Gets an item from the original stack and pushes it onto the auxiliary stack while the original stack is not empty.If the original stack is empty, the top element of the auxiliary stack becomes the bottom element of the original stack. Store this element in variable 'i'. To restore the original stack to its original state, remove all items from the secondary stack and restore it to the original stack.At the end of this process, the original stack is unchanged and the variable "i" is set to the bottom of the original stack.
To know more about Push visit:
https://brainly.com/question/14257345
#SPJ4
an xml document which satisfies the rules specified by w3c is
If an XML document complies with the W3C's set of rules, it is said to be well-formed.
What do you mean by XML?Extensible Markup Language (XML) is its name. A set of codes, or tags, used to define the text in a digital document is known as a markup language. Hypertext Markup Language (HTML), which is used to format Web pages, is the most well-known markup language.
They are as follows:
Every start tag in a properly formatted XML document must have a corresponding end tag.In an XML document, nesting of elements must be done correctly. For instance, nesting correctly for tutorial>topic>XML/topic>/tutorial> is different from nesting correctly for tutorial>topic>XML/tutorial>/topic>.Two attributes in each element cannot have the same value. For instance, tutorial id="001">topic>XML/topic> is correct, however tutorial id="001" id="w3r">topic>XML/topic> is wrong.It is necessary to properly specify markup characters. It is correct to use tutorial id="001" id="w3r">topic>XML/topic>/tutorial> rather than tutorial id="001" id="w3r">topic>XML/topic>/tutorial>, for instance.There can only be one root element in an XML document. Therefore, an element that only appears once in an xml document and does not occur as a child element within another element is said to be the root element of that document.Learn more about XML document click here:
https://brainly.com/question/14266401
#SPJ4
Which is an advantage of client-server networks?
Client-server networks are easy to maintain
Client-server networks are cheap to build
The client relies on the server
Clients are kept secure by the server
The centralized management of programs and data is a major benefit of client-server networks. Data transfer is made easier and safer with the use of client-server networks. When a company has to send data quickly and securely, using the network is a wise choice.
What is data transfer?Data communication, also referred to as digital communications, is the transfer and reception of data in the form of a digital bitstream or a digitized analog signal sent via a point-to-point or point-to-multipoint communication channel. When talking about data transfer, we're talking about the safe exchange of huge files across systems or businesses. A comprehensive corporate application integration solution is frequently substituted in an internal setting by data transfer.Between digital devices, serial transmission and parallel transmission are the two ways used to transfer data. Data bits are sent across a single channel in a serial fashion. Multiple data bits are sent over several channels simultaneously in parallel data transfer.To learn more about data transfer refer to:
https://brainly.com/question/23725985
#SPJ4
all programs are normally stored in rom and loaded into ram as needed for processing.. True or false?
All programs are normally stored in rom and loaded into ram as needed for processing. The statement is false.
Read-only memory, also known as ROM, is a category of computer storage that houses non-volatile, permanent data and is typically only readable, not writeable. The software necessary for a computer to reboot or start up each time it is turned on is stored in the ROM. Large input/output (I/O) operations are also carried out by ROM, and it also safeguards programs or software instructions. Data that has been written to a ROM chip cannot be erased.
A little piece of ROM that houses the startup firmware is built into almost all computers. Basic Input/Output System refers to this boot firmware (BIOS). This software comprises of code that directs the computer's boot-up procedures, including the loading of the operating system (OS) into random access memory (RAM) and the execution of hardware diagnostics.
Learn more about ROM:
https://brainly.com/question/15302096
#SPJ4
Which core competency incorporates guidance on coordinating trains ?
Lean Portfolio Management (LPM) - Aligning strategy and execution via the use of systems thinking and lean methodologies to strategy and investment funding, agile portfolio operations, and governance.
Lean Portfolio: A collection of initiatives that represent key company goals. Teams of teams that must utilise their resources to complete the activities are given funding. Lean Portfolio Management's main goal is to help organisations move away from annual planning and budgeting cycles with set scope assumptions and toward more continuous, agile flows that are controlled by a portfolio Kanban system. Lean is a collection of management techniques that aim to reduce waste and increase productivity. Lean's basic tenet is to minimise and get rid of wasteful activities and processes.
To learn more about Lean Portfolio click the link below:
brainly.com/question/30159303
#SPJ4
what network interface does the address define wireshark
The network interface that the address defines in Wireshark is the network adapter or NIC (Network Interface Card) connected to the system.
What is the Wireshark ?
Wireshark is a free and open-source packet analyzer. It is used for network troubleshooting, analysis, software and communications protocol development, and education. It can be used to capture and examine data packets transmitted over a network. It is a powerful tool that allows users to see what is happening on the network at a microscopic level. Wireshark can capture and analyze traffic from a wide variety of networks, such as Ethernet, Wi-Fi, Bluetooth, and USB. It can be used to analyze the performance of network applications and troubleshoot network-related issues. It can also be used to analyze the performance of different networks and compare them to each other.
To learn more about Wireshark
https://brainly.com/question/13261433
#SPJ4
In the example of the y2k bug, do you think that the hypothetical programmer dave took the wrong approach in storing years as only two-digits. if your group has divided opinions, say so
Hint: Give a brief justification that shows deeper analysis than: "Dave was wrong because two-digit years caused the Y2K bug."
It is considered as poor programming practice as it again to save years as two digits, as was done in the Y2K bug, as this could result in uncertainty and loss of data.
How programming practice takes place?It is seen as poor programming practice to save years as two digits, as was done in the Y2K bug, as this might result in ambiguity and data loss. Assuming that the decade 2000 would've been represented as "00" led to the Y2K problem, which could have led software to mistakenly read the year as 1900 rather than 2000.
It is advised to adopt a format that can accept diverse types of dates and times, such as the ISO 8601 standard, or to save years using four digits in order to prevent these types of problems.
In light of the Y2K issue, it can be determined that storing years as two quantities was a mistake.
To know more about software visit :-
https://brainly.com/question/1913367
#SPJ4
what is the cpi of the loop for one iteration (the bne instruction included)?
The CPI of the loop for one iteration (the bne instruction included) is 3.
What is CPI
CPI stands for Consumer Price Index. It is a measure of inflation used by economists to track the change in the average price of a basket of goods and services over time. The CPI is used to evaluate changes in the cost of living, and is often used to adjust wages and benefits. Additionally, CPI data is used to calculate the real value of money, which is important for understanding economic growth and the value of investments. The CPI can also be used to compare the purchasing power of different nations, as well as to calculate economic productivity.
To know more about CPI
https://brainly.com/question/14846198
#SPJ4
Determine True or False. java byte codes are directly executable whereas java source code is not.
It is False that .java byte codes are directly executable whereas java source code is not as neither Java byte codes nor Java source code is executable. Both must be compiled or interpreted into machine code.
In Java programming language, programs are not compiled into executable files. First, they are compiled into bytecode, which the Java Virtual Machine then executes at runtime.
In Java, the java source code is compiled into bytecode using the javac compiler.
.java byte code can be executed by interpretation, just-in-time compiling, or any other technique that was chosen by the designer of a particular JVM.
Learn more about Java at:
brainly.com/question/29966819
#SPJ4
True/False: A corpus is a group of related documents that against which information retrieval is employed.
Select one:
True
False
According to the question of documents that against which information retrieval is employed is false.
What is documents?
Documents are items or records, either physical or digital, that contain information or evidence and can be used as references or sources of proof. Documents can be written, such as contracts, invoices, receipts or memos, or they can be electronic, such as emails, audio recordings, or digital images. Documents are used to record events, activities, or transactions, and to create a written or electronic record of them. Documents can also be used to store and transfer information, as well as provide evidence of the information. Documents are often used in business and legal settings, as they provide a reliable means of communication, proof, and storage. Documents also provide a way to track changes and help organizations improve their processes.
To learn more about documents
https://brainly.com/question/1218796
#SPJ4
Which of the following best compares the values displayed by programs A and B?Program A and program B display identical values.Program A and program B display the same values in different orders.Program A and program B display the same number of values, but the values differ.Program A and program B display a different number of values.
Program A and program B display identical values is the best compares the values displayed by programs A and B.
The phrase "identical values" means that the values displayed by both programs A and B are exactly the same. This means that if the programs are displaying any kind of data, such as numbers, strings, or other types of data, the data displayed by both programs must be exactly the same.
For example, if both programs are displaying a list of numbers, the numbers in the list must be in the same order and must have the same values in both programs. If both programs are displaying a string, the string must be exactly the same in both programs, with no differences in capitalization, spacing, or any other aspect of the string.
In contrast, if the programs display the same values in different orders, it means that the values are the same, but they are not arranged in the same way in both programs. For example, if both programs are displaying a list of numbers, the numbers in the list may be the same, but they may be arranged in a different order in each program.
If the programs display the same number of values, but the values differ, it means that the programs are displaying the same number of values, but the values themselves are different. For example, if both programs are displaying a list of numbers, the number of numbers in the list may be the same, but the values of the numbers may be different.
Learn more about programs here:
https://brainly.com/question/14368396
#SPJ4
assuming the following java statement: int num = 10; what does the variable num store?
Considering the Java statement: int num = 10; What is the value of the variable num stored 10 in numerical form.
a pointer to the built-in Circle object's memory address. Num is an integer, and cost is a double. These two variables have been declared and assigned values. One statement should output both the number and the cost to standard output. Print both values on a single line that ends with a newline character, separated by a space (number first, then cost). Similar to the ones before, many variables store numbers and strings. Lists, dictionaries, and Boolean values (true/false) are just a few more sorts of information that can be stored in variables.
Learn more about information here-
https://brainly.com/question/15709585
#SPJ4
the values for the plantid attribute are generated automatically by the database. what is the term for this?
The term for this is "Auto-Incrementing" or "Auto-Generated" values. It refers to a feature in many databases where a unique numerical value is automatically assigned to a specific attribute, such as "plantid", each time a new record is inserted into the database.
This helps to ensure that each record has a unique identifier and eliminates the need for manual assignment of values. The concept of auto-incrementing values in databases refers to the automatic generation of unique numerical values for specific attributes within the database. This is done to ensure that each record inserted into the database has a unique identifier and eliminates the need for manual assignment of values. For example, in a database containing information about plants, each plant may be assigned a unique "plantid" value that is generated automatically by the database.
Learn more about Auto-Incrementing: https://brainly.com/question/14453658
#SPJ4
what is the first step to performing hardware maintenance?
Turning off the computer and removing its power source is the first step in undertaking hardware maintenance. Monitoring, checking, and fixing hardware parts to make sure they're still in excellent working condition is known as hardware maintenance.
It entails routinely inspecting computers, servers, printers, and other equipment to spot and promptly resolve any hardware-related issues. The longevity of physical components and the efficient operation of a network depends on this kind of maintenance.
Maintaining your gear regularly can help you avoid expensive repairs, system failures, and data loss. In order to boost productivity and efficiency, it also helps to optimize the hardware's performance. Cleaning and dusting computer parts, looking for wear and tear or indicators of damage, replacing faulty parts, and performing diagnostic tests are common maintenance procedures.
To learn more about hardware maintenance click here:
brainly.com/question/28146743
#SPJ4
What are the shortest association fibers in the central white matter called?
Numerous short association fibres, also known as arcuate or "U" fibres, connect nearby gyri and are located just below the grey substance of the hemispheres' cortex. Some people move from the sulcus's one wall to the other.
Short-association fibres (also known as arcuate fibres) and long-association fibres are two different types of association fibres that connect cortical regions in one hemisphere with nearby or distant regions of the same hemisphere. Numerous fibre systems may enter, exit, and traverse the long-association fibres, which are frequently recognised physically as distinct association bundles.
The uncinate fasciculus, the superior longitudinal fasciculus, the superior and inferior occipitofrontal fasciculi, and the cingulum are significantly termed bundles. The primary monoamines (dopamine, norepinephrine, and serotonin) and a portion of the cholinergic projections pass via the cingulum on their way to various target sites.
To learn more about association fibres click here:
brainly.com/question/13062760
#SPJ4
the general-induction method of testing cable calls for the receiver to be at least ? paces away from the transmitter.
15 Poor aluminum strand cleaning before to compression is one of the main reasons of splicing failures. Technology that empowers line personnel has been created by the Power Generation Research Institute.
What benefits does a Class 1 termination offer?“A Class I High-Voltage Cable Termination (or, more simply, a Class I Termination) provides the following features: (1) some form of electric stress control for the cable insulation shield terminus, (2) complete external leakage insulation between the high-voltage conductor(s) and ground, and (3) a seal to prevent the entrance of the external environment.”
Poor cleaning of aluminum strands before to compression is one of the key underlying causes of splicing failures. The Electric Power Research Institute has created technology that allows line operators to properly prepare conductors in a timely, efficient, and cost-effective manner. PVC is a thermoplastic polymer that is commonly used for cable and conductor jackets, as well as some molded plugs.
To learn more about termination to refer;
https://brainly.com/question/27349244
#SPJ4
jeremiah is an in-house seo specialist for a car rental company with locations across the u.s. he works closely with the firm's web designer, maria, who mentions to him that she'd like to contextualize the site's homepage by displaying the nearest car rental pickup spot based on the user's location. jeremiah thinks this is a great idea, but has concerns about how it may slow down the site. what solution could jeremiah employ to keep the functionality while maintaining the site speed?
Jeremiah could put the JavaScript that creates the site location where it is required in the page's HTML, and keep any other JavaScript that is not necessary in the footer.
It's crucial to have a successful landing page for your website. It can assist in directing visitors to your website, where they can discover your goods and services and, ideally, take action.
Making JavaScript-heavy websites simple to crawl and index while also being search-friendly is the goal of JavaScript SEO, a subset of Technical SEO (Search Engine Optimization). The objective is to increase these websites' visibility and search engine rankings.
Therefore, Jeremiah could still keep the functionality of the site while maintaining it putting the JavaScript that creates the site location where it is required in the page's HTML, and keep any other JavaScript that is not necessary in the footer.
Learn more about SEO here: https://brainly.com/question/26324970
#SPJ4
TRUE/FALSE. ftk imager can acquire data in a drive's host protected area.
This statement is False: ftk imager can acquire data in a drive's host protected area.
A disk image creation program that is completely free to use is called FTK Imager. The Access Data Group was in charge of its creation. It is a tool that facilitates data viewing and imaging.
FTK Imager allows you to:
Without altering the original evidence, create forensic pictures or exact duplicates of local hard drives, floppy and Zip disks, DVDs, folders, individual files, etc.
On local hard drives, network drives, floppy disks, Zip disks, CDs, and DVDs, you can preview files and directories.
Additionally, you can inspect any forensic photographs that might be kept on a local computer or disc.
An image can also be mounted for a read-only view, enabling you to see the information in the forensic image exactly as the user viewed it on the original drive.
From forensic pictures, export files and folders.
View and restore files that have not yet been permanently destroyed from the Recycle Bin.
To know more about FTK:
https://brainly.com/question/15082540
#SPJ4
Who develop by Where c progaming
Note that C Programing is a Programming Language developed by Dennis Ritchie.
Who is Dennis Ritchie?
Dennis MacAlistair Ritchie was a computer scientist from the United States. He is most known for developing the C programming language, as well as the Unix operating system and the B programming language alongside long-time collaborator Ken Thompson.
Ritchie was also engaged in the creation of the operating systems Plan 9 and Inferno, as well as the programming language Limbo.
Ritchie was relocated to Lucent Technologies as part of an AT&T reorganization in the mid-1990s, where he resigned in 2007 as head of the System Software Research Department.
Learn more about Programming:
https://brainly.com/question/7344518
#SPJ1
when one reference variable is assigned to another, what happens? multiple answers may be true. group of answer choices neither, it is not possible to do so. the object is copied. the object is moved to the new location. both variables refer to the same object
When one object reference variable is assigned to another object reference variable then a copy of the reference is created. So Option (B) is correct
What is object reference variable?A reference is a variable that acts as an alias for another variable. In a nutshell, it's the same as renaming an already-existing variable. Once a reference is assigned to a variable, we can refer to it using either the reference name or the variable name.
1. A reference variable is used to point to an object or value.
2. In Java, reference types include classes, interfaces, arrays, enumerations, and annotations. In Java, reference variables store the objects/values of reference types.
3. A null value can be stored in a reference variable. If no object is passed to a reference variable, it will store a null value by default.
4. Using dot syntax, you can access object members via a reference variable.
To know more about object reference variable,Refer to:
https://brainly.com/question/14290505
#SPJ4
a data analyst wants a quick summary of the structure of their data frame, including the column names and the number of rows and variables. what function should they use? 1 point head() str() colnames() rename with()
A data analyst wants a quick summary of the structure of their data frame, including the column names and the number of rows and variables. The function that should used is str(). Because the str() function returns a summary of the structure of a dataframe, including column names, the number of rows and variables, and the type of data stored.
Data in the quest of knowledge is a collection of discrete values that transmit information, describing amount, quality, fact, statistics, other fundamental units of meaning, or just simply sequences of symbols that may be further understood. A datum is a specific value contained in a group of data. Typically, data is arranged into tables or other structures that provide it greater context and meaning and can be used as data in other, larger structures. It's possible to use data as variables in a computation. Data can represent measurements or abstract concepts. Data are frequently employed in economics, science, and practically every other aspect of human organizational activity.
Here you can learn more about data in the link brainly.com/question/10980404
#SPJ4
By default, when a cell reference is first included in a formula (so that only the column and row reference are included), it is displayed as a relative cell reference.
True or false
By default, when a cell reference is first included in a formula (so that only the column and row reference are included), it is displayed as a relative cell reference.
When you enter a cell reference in a formula by default?Every cell reference is a relative reference by default. Based on the relative positioning of rows and columns, they alter when replicated across many cells. For instance, if you move the formula =A1+B1 from row 1 to row 2, it will change to =A2+B2. A cell reference is a relative reference by default, which implies that the reference is relative to where the cell is. To illustrate, if you refer to cell A2 from cell C2, you are actually referring to a cell two columns to the left (C minus A)—in the same row (2).By default, a cell reference is shown as a relative cell reference when it is first used in a calculation (such that only the column and row references are presented).To learn more about cell reference refer to:
https://brainly.com/question/14571070
#SPJ4
suppose the program counter (pc) is set to 0x2000 0000. is it possible to use the jump (j) mips assembly instruction to set the pc to the address as 0x2010 0000? is it possible to use the branch-on-equal (beq) mips assembly instruction to set the pc to this same address?
Points to the next instruction to be executed.
MIPS, how does the program counter work?The control flow and program counter.Every machine contains a program counter (also known as a PC) that indicates the next instruction to be performed. PC is normally increased by 4 after each instruction is performed. A branch instruction modifies the control flow by altering the PC.
You cannot, however, change its value without changing the code's execution route - execution continues from the address indicated.A program counter is a register that is used in computer architecture and operating systems. It contains the address of the next instruction that will be executed. After an instruction is performed, it is increased by one (PC = PC +1), and the program counter is moved to the next instruction.
To learn more about MIPS to refer;
https://brainly.com/question/4196231
#SPJ4
what is the purpose of a fourier transform in ofdm? group of answer choices transforms time function to frequency function and vice-versa split data streams create frequency overlap digitally modulate the data none of the above
The purpose of the Fourier Transform in OFDM is to transform time function to frequency function and vice-versa.
The Fourier Transform can be described as an important image processing tool that is used to decompose an image into its sine and cosine components. The output of the transformation represents the image in the Fourier or frequency domain, while the input image is the spatial domain equivalent. The Fourier transform means a representation of an image as a sum of complex exponentials of varying magnitudes, frequencies, and phases. The Fourier transform plays a critical role in a broad range of image processing applications, contain enhancement, analysis, restoration, and compression.
To know more about OFDM Please click on the given link
https://brainly.com/question/29580929
#SPJ4
to select multiple, unconnected sketch entities, you need to press and hold down the ________ key on the keyboard while selecting the entities.
The correct answer is You must press and hold down the key on the keyboard while selecting multiple drawn entities if you want to choose more than one. Your response: command
Maintaining your designs and drawing files regularly is crucial for you as the AutoCAD Operator. While making drawings on a daily basis, it is very simple to let things pass and fail to fix minor issues with the drawings or the drawing files. CAD software is frequently used by various types of engineers and designers. CAD software can be used to create both two-dimensional (2-D) drawings and three-dimensional (3-D) models. You can swiftly introduce new, distinctive products to the market by making designs simple to share, review, simulate, and update using 3D CAD.
To learn more about multiple drawn entities click on the link
brainly.com/question/28231422
#SPJ4
Which statement regarding a keylogger is NOT true?
a. Hardware keyloggers are installed between the keyboard connector and computer
keyboard USB port.
b. Software keyloggers are easy to detect.
c. Keyloggers can be used to capture passwords, credit card numbers, or personal
information.
d. Software keyloggers can be designed to send captured information automatically
back to the attacker through the Internet.
b. Software keyloggers are easy to detect this statement regarding a keylogger is NOT true.
Each keystroke typed on a certain computer is observed and recorded using a keylogger, a type of electronic spy device. It is also referred to as a keystroke logger or a keyboard capture. For Android and iPhone handsets, keylogger software is also accessible.
Cybercriminals frequently utilize keyloggers as spyware to steal vital corporate data, login credentials, and personally identifiable information (PII).
In differing degrees, some keylogger usage might be deemed morally right or appropriate. Keyloggers can also be applied by:
Employers may monitor employees' computer use, parents may monitor their children's internet use, device owners may look into possible unwanted activity on their devices, and law enforcement organizations may investigate computer-related issues.
To know more about keyloggers:
https://brainly.com/question/17231901
#SPJ4
which type of computer crime describes actions in which the computer is used only to further a criminal end? in other words, the computer or data contained therein is not the object of the crime.
This type of computer crime is known as cyber-enabled crime.
What is cyber-enabled crime?Cyber-enabled crime describes the use of technology and the internet to commit a variety of criminal activities. It encompasses a wide range of activities such as identity theft, fraud, online harassment, cyberbullying, data theft, malicious software, online scams, and intellectual property theft. Cyber-enabled crime has been increasing exponentially in recent years, with law enforcement and security practitioners struggling to keep up with the rapidly evolving nature of the threats.
This type of crime involves using a computer to commit an offense, but the computer or data stored on the computer is not the target of the crime. Examples of cyber-enabled crime include using a computer to commit fraud, identity theft, money laundering, and other criminal activities.
To learn more about cyber-enabled crime
https://brainly.com/question/23838602
#SPJ4
Python
c = 1
sum = 0
while (c < 10):
c = c + 2
sum = sum + c
print (sum)
Since I cannot tell where the indents (spaces) in the code are, there are two possible answers.
If the "while" part of the code looks like this, with a space before both the second and third line:
while (c < 10):
c = c + 2
sum = sum + c
the answer is 35.
If the "while" part of the code looks like this, with space only before the second line:
while (c < 10):
c = c + 2
sum = sum + c
the answer is 11.
magine you are a team leader at a mid-sized communications company. One of your fellow team leaders is
considering setting up a cloud computing system for their team to store and share files. They have begun to
question the wisdom of this move, as someone has told them that security might be an issue. Security
concerns aside, what would you say in order to convince them that cloud computing is a good idea? Mention
least three advantages
that would benefit their team.
They can share each other's work files easier which could be more work efficient.
If something happens to any of the devices the files are stored on, they can recover them because they used cloud computing.
If you accidentally lose a file, you can find it again.