An alkane's boiling point is proportional to its molecular weight, which is defined by the amount of carbon atoms it contains. The amount of carbon atoms in an alkane increases.
its molecular weight, and hence its boiling point. C8H18 contains the most carbon atoms and hence the greatest molecular weight of the possibilities presented. As a result,An alkane's boiling point is proportional to its molecular weight, which is defined by the amount of carbon atoms it contains. The amount of carbon atoms in an alkane increases. it has the highest boiling point among the alkanes listed. In general, larger molecular weight alkanes have a higher boiling point due to stronger intermolecular interactions (Van der Waals forces) between their molecules, which need more energy to overcome and hence result in a higher boiling point.
learn more about boiling point here:
https://brainly.com/question/2153588
#SPJ4
Calculate the energy of a photon of electromagnetic radiation at each of the following wavelengths.
a. 632.8 nm (wavelength of red light from helium-neon laser)
b. 503 nm (wavelength of maximum solar radiation)
c. 0.0520 nm (a wavelength contained in medical X-rays)
The energy of a photon of red light from helium-neon laser is 2.44 x 10^-19 J, the energy of a photon of maximum solar radiation is 3.10 x 10^-19 J, and the energy of a photon of X-rays is 1.24 x 10^-16 J.
What is electromagnetic radiation?Electromagnetic radiation consists of waves of the electromagnetic field, which propagate through space and carry momentum and electromagnetic radiant energy.
The energy of a photon of electromagnetic radiation can be calculated using the following formula:
Energy = h * c / λ
where h is Planck's constant (6.62607015 x 10^-34 J.s), c is the speed of light (2.99792458 x 10^8 m/s) and λ is the wavelength of the radiation.
a. 632.8 nm (wavelength of red light from helium-neon laser)
Energy = 6.62607015 x 10^-34 J.s * 2.99792458 x 10^8 m/s / (632.8 x 10^-9 m) = 2.44 x 10^-19 J
b. 503 nm (wavelength of maximum solar radiation)
Energy = 6.62607015 x 10^-34 J.s * 2.99792458 x 10^8 m/s / (503 x 10^-9 m) = 3.10 x 10^-19 J
c. 0.0520 nm (a wavelength contained in medical X-rays)
Energy = 6.62607015 x 10^-34 J.s * 2.99792458 x 10^8 m/s / (0.0520 x 10^-9 m) = 1.24 x 10^-16 J
Therefore, The energy of a photon of red light from helium-neon laser is 2.44 x 10^-19 J, the energy of a photon of maximum solar radiation is 3.10 x 10^-19 J, and the energy of a photon of X-rays is 1.24 x 10^-16 J.
Learn more about electromagnetic radiation here: brainly.com/question/1408043
#SPJ1
why does 4 chlorobenzaldehyde have a higher vapor pressure than 4 chlorobenzl alcohol
Vapor pressure refers to the pressure exerted by a vapor in equilibrium with its liquid form. It is a measure of the volatility of a liquid and is dependent on the intermolecular forces between the molecules in the liquid state, as well as the temperature.
In comparing 4-chlorobenzaldehyde and 4-chlorobenzyl alcohol, it is seen that 4-chlorobenzaldehyde has a higher vapor pressure than 4-chlorobenzyl alcohol. This is due to the difference in the intermolecular forces between the two compounds.
4-chlorobenzaldehyde is an aldehyde, which has a polar carbonyl group (-C=O) in its structure. This polar group causes a significant dipole-dipole interaction between the molecules in the liquid state, resulting in a relatively weak intermolecular force. On the other hand, 4-chlorobenzyl alcohol is an alcohol, which has a hydroxyl (-OH) group in its structure. The presence of this hydroxyl group increases the hydrogen bonding between the molecules in the liquid state, leading to a stronger intermolecular force compared to 4-chlorobenzaldehyde.
The strength of the intermolecular forces affects the vapor pressure of a liquid. The stronger the intermolecular forces, the greater the energy required to separate the molecules into the vapor state. In the case of 4-chlorobenzyl alcohol, the strong hydrogen bonding between the molecules requires a large amount of energy to overcome, leading to a lower vapor pressure compared to 4-chlorobenzaldehyde.
In conclusion, the higher vapor pressure of 4-chlorobenzaldehyde compared to 4-chlorobenzyl alcohol is due to the difference in the strength of the intermolecular forces between the two compounds, which is affected by the presence of polar and hydrogen bonding groups in their structures.
Here you can learn more about Vapor pressure
https://brainly.com/question/2510654#
#SPJ11
rate of diffusion of methane to co2
The rate of diffusion of methane (CH4) to carbon dioxide (CO2) depends on various factors such as temperature, pressure, and concentration difference between the two gases.
In general, the rate of diffusion is proportional to the concentration gradient and the diffusion coefficient, which is a measure of the ability of a gas to diffuse through another gas. At a given temperature and pressure, the diffusion coefficient for methane is typically lower than that for carbon dioxide, meaning that methane diffuses more slowly than carbon dioxide.
Additionally, the rate of diffusion may also be influenced by other factors such as the presence of other gases or surfaces in the environment. For example, in the presence of an obstacle or a surface that impedes the diffusion of the gas, the rate of diffusion will be lower.
To determine the precise rate of diffusion of methane to carbon dioxide, it is necessary to perform experiments or simulations under controlled conditions, taking into account all relevant factors that may affect the diffusion process.
To learn more about rate of diffusion:
https://brainly.com/question/24746577
#SPJ4
a solution is made using 270.0 ml of acetone (density 0.7857 g/ml) and 450.0 ml of water (density 1.000 g/ml). what is the molality acetone in water?
The molality of the solution is 8.22 m.
What is the molality of the acetone?We have to note that the molality has to do with the ratio of the amount of the substance that have been dissolved to the mass of the solution in kilograms and it is one of units of concentration that we have.
Mass of the acetone = Density * volume
= 270.0 ml * 0.7857 g/ml
= 212 g
Number of moles of the acetone = 212 g/58 g/mol
= 3.7 moles
The molality now is; Number of moles/ Mass of the solution
= 3.7 moles/450 * 10^-3 Kg
= 8.22 m
Learn more about molality:https://brainly.com/question/26921570
#SPJ1
if a negatively charged particle is placed at rest in an electric potential field that increases in the positive x-direction, what will the particle do? a. accelerate in the positive x-direction
b. remain at rest
c. accelerate in the negative x-direction
An electric potential field that grows in the positive x-direction will cause an at-rest negatively charged particle to accelerate in that direction.
Around a charged item, the electric field acts as a "force field" to show in which direction an imaginary positively charged particle would be pushed by the electric force. It also demonstrates how powerful of a shove the electric force would provide.
The difference between two points in an electric field in terms of potential energy per unit charge is known as the electric potential, also known as voltage.
We are aware that, if we move the particle to a specific location, the electrical potential energy will change depending on the amount of charge we are pushing or pulling, as well as whether it is positive or negative. To measure the electrical potential at any given site, physicists utilise a single positive charge as our model charge.
To know more about potential from the link
brainly.com/question/26978411
#SPJ4
the pka of phenol (a) is around 9, while the pka of cyclohexanol (b) is around 15. why do you think a is more acidic than b.
One of the important effects on a molecule's acidity is whether the conjugate base anion can be stabilised by resonance.
Phenol, for example, is a stronger acid than cyclohexanol because its conjugate base is much more stable than cyclohexanol's conjugate base. The phenol conjugate base has increased stability because this anion can delocalize the negative charge throughout the ring via resonance, effectively stabilizing it.
Because cyclohexanol's conjugate base lacks resonance structures to stabilise the charge, it is less stable.
The pKa of phenol is around 9, while the pKa of cyclohexanol is around 15. This means that the acidity of phenol is around 3 times greater than that of cyclohexanol.
The structures of both molecules are shown in the green box. Phenol has a single carbon atom in its structure, while cyclohexanol has six.
Learn more about Phenols here
https://brainly.com/question/24018781
#SPJ4
when is a atom chemically reactive
Atom is chemically reactive when it has one or more electrons in the outermost shell that are not filled or not filled completely.
When is an atom chemically reactive?Atom is chemically reactive when it has one or more electrons in its outermost shell that are not filled/ not filled completely. Such atoms have tendency to gain or lose the electrons in order to obtain stable electron configuration, and form chemical bonds with other atoms to form the molecules. Reactivity of an atom is dependent on its electron configuration, and also factors such as the size of its atomic radius, energy of its valence electrons, and strength of the attraction between nucleus and valence electrons.
To know more about chemically reactive, refer
https://brainly.com/question/25103661
#SPJ4
order each of the sets of compounds with respect to sn2 reactivity (1 = fastest). compound a compound b compound c
To determine the reactivity of compounds in an SN2 reaction, the following factors should be considered, Size of the leaving group, Stability of the leaving group, Electron-withdrawing ability of substituents on the substrate.
Size of the leaving group: Smaller leaving groups tend to depart faster, increasing the reaction rate.
Stability of the leaving group: More stable leaving groups tend to depart faster, increasing the reaction rate.
Electron-withdrawing ability of substituents on the substrate: Electron-withdrawing substituents increase the electron density on the carbon, making it a better nucleophile, and slowing the reaction.
Steric hindrance at the reaction site: Increased bulk around the reaction site can impede the approach of the nucleophile and the leaving group, slowing the reaction.
Without the specific compounds, it is not possible to determine their reactivity in an SN2 reaction.
Learn more about organic reactions:
brainly.com/question/29728169
#SPJ4
in the titration of 20.0 ml of 0.200 m hobr with 0.100 m naoh, what is the ph after 20.0 ml of the naoh solution is added? (ka hobr = 2.5 × 10–9)
In the titration of the 20.0 ml of 0.200 m HOBr with 0.100 M NaOH, The the pH after 20.0 ml of the NaOH solution is added is 10.72.
The moles of the HOBr = moles of the NaOH
Volume × 0.1 = 0.02 × 0.2
Volume of NaOH = 0.04 L
The moles of the salt = moles of the HOBr
0.02 × 0.2 = 0.004 moles
The total volume of the solution = 0.04 + 0.02
= 0.06 L
The concentration of salt = 0.004 / 0.06
= 0.067 M
[OH⁻] = √ aKw / Ka
a = [salt] = 0.067 M
[OH⁻] = √( 0.067 × 10⁻¹⁴ / 2.5 × 10⁻⁹ ) M
= 5.18 × 10⁻⁴ M
pOH = -log(5.18 × 10⁻⁴)
pOH = 3.28
pH = 14 - pOH
= 14 - 3.28
pH = 10.72
To learn more about pH here
https://brainly.com/question/30295821
#SPJ4
2) A half-cell containing Br and Br- is connected to a half-cell containing Mg+2 and Mg to form a voltaic cell. Determine the proper direction for each half cell reaction to assure a spontaneous, complete cell reaction. Find the value of the complete cell electrode potential (E°).
A half cell is one of the two electrodes in a galvanic cell or simple battery.
Find the value of the complete cell electrode potential (E°)?
Look up the standard reduction potentials for Br and Mg. I find the following:
Mg2+ + 2e- ==> Mg(s) Eº = -2.38 V
Br2(l) + 2e- ==> 2Br-(aq) Eº = 1.07 V
Accordingly, Br2 will be reduced and Mg(s) will be oxidized in order to have a positive potential.
Br2 + 2e- ==> 2Br-
Mg ==> Mg2+ + 2e-
------------------------------------
Br2 + Mg ==> Mg2+ + 2Br- Eº = 1.07 + 2.38 = 3.45 V
To learn more about half cell refers to:
https://brainly.com/question/24002834
#SPJ1
The density of solid w is 19. 3 g/cm3. How many atoms are present per cubic centimeter (cm3) of w?.
6.29x10^22 atoms are present in the 19. 3 g/cm3 of w.
The density of the solid = 19.3 g/cm³.
For every cubic centimeter of tungsten (W) has a mass of 19.3 grams.
The molar mass of tungsten = 183.84 g
Avogadro's number = 6.022x10^23 atoms / moles
The amount of substance in moles = Mass of solid/ Molar mass of W
Amount of substance in moles = (19.3 g) x (1 mole/ 183.84 g) = 0.1044 moles.
The number of atoms = the amount in moles X Avogadro's number.
The number of atoms = (0.1044 moles) x (6.022x10^23 atoms/moles)
The Number of atoms = 6.29x10^22 atoms.
Thus, In conclusion, there are approximately 6.29x10^22 atoms of W.
To learn more about the density of solid problems,
https://brainly.com/question/29387347
#SPJ4
certain researchers have published peer-reviewed reports that use of zinc lozenges reduces the length and severity of cold symptoms. what is one reason why some scientists are still skeptical about the merits of using zinc lozenges during a cold?
Because there may be other factors like immune system behind faster recovery from cold which my not be related to use of zinc lozenges.
Other factors, such as stress levels or immune system variances, could have contributed to the faster recovery of the zinc lozenge users. Although studies on zinc supplements have been examined and published, there is no absolute proof that zinc supplements have a positive impact on the duration and intensity of cold symptoms. This is due to the fact that a variety of factors, including stress or relaxation-inducing situations, eating, immune system variations, and sleep quality, among others, can have the same effect. Some experts may still be dubious about the effectiveness of utilising zinc lozenges to cure a cold due to the enormous number of variables that can affect the length and intensity of symptoms.
To learn more about zinc visit,
https://brainly.com/question/13890062
#SPJ4
Smog causes acid rain due to the pollution in the air. It can strip trees of their leaves which prevents photosynthesis. What else is a direct result of smog?.
Smog causes acid rain due to the pollution in the air. It can strip trees of their leaves which prevents photosynthesis, therefore, option A (the direct result of smog is that plants die because the soil is stripped of its nutrients) is the right choice.
Smog, often known as smoke fog, is a severe kind of air pollution. Early in the 20th century, the words smoke and fog were combined to form the word "smog" because their opacity and smell describe smoky fog.
The phrase was then used to describe the pea soup fog, which was a common and severe issue in London from the 19th century to the middle of the 20th century. This type of observable air pollution is made up of smoke, sulfur dioxide, nitrogen oxides, ozone, and other particulates. Coal combustion emissions, vehicle emissions, industrial emissions, forest and agricultural fires, and photochemical reactions of these emissions are all sources of man-made haze.
The complete question is attached.
Want to know more about Smog visit the link which is given below;
https://brainly.com/question/15728274
#SPJ4
if the energy of the alpha nucleus was 4.95 mev, how close to the gold nucleus could it come before being deflected
If the energy of the alpha nucleus was 4.95 MeV, the closest distance of approach from the centre of the gold nucleus it could reach before being deflected would be approximately 1.8 femtometers (fm).
This is because the repulsive force between a doubly charged alpha particle and a gold nucleus increases as the distance between them decreases, and the speed of the alpha particle is not enough to overcome this force.
To calculate the exact distance of closest approach, one would need to solve the equation of motion for the alpha particle, taking into account the repulsive force between the two particles.
Learn more about the energy of the alpha nucleus
https://brainly.com/question/29434158
#SPJ4
gaseous methane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . suppose 16. g of methane is mixed with 24.1 g of oxygen. calculate the minimum mass of methane that could be left over by the chemical reaction. round your answer to significant digit.
Gaseous methane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . suppose 16. g of methane is mixed with 24.1 g of oxygen. calculate the minimum mass of methane that could be left over by the chemical reaction. round your answer to significant digit.
CH4 + 2O2 → CO2 + 2H2O
M(CH4) = 16.04 g/mol
n(CH4) =16 /16.04 =0.997mol
M(O2) = 15.99 g/mol
n(O2) =24.1/15.99 = 1.507mol
According to the reaction:
n(H2O) = 2n(CH4) = 2×0.997 = 1.994
M(H2O) = 18.01 g/mol
m(H2O) = 18.01×1.994 = 35.911g
similarly,
m(CH4)= 16 * 0.997 = 15.952g
Answer: 15.952g
To know more about methane click here:
brainly.com/question/15061430
#SPJ4
a)berylium b)sodium c)neon d)oxygen e)selenium
Answer:
a) Beryllium: [He] 2s2
b) Sodium: [Ne] 3s1
c) Neon: [He] 2s2 2p6
d) Oxygen: [He] 2s2 2p4
e) Selenium: [Ar] 3d10 4s2 4p4
Explanation:
Given the reaction CaCO3(s) --> CaO(s) + CO2(g), if 50. 0 g of CaCO3 react, what is the percent yield of CO2 if 20. 0 g of CO2 are produced in the lab? *
What is an acid and a base?
A substance is considered to be acid if it dissolves in water and produces hydrogen ions (H+). A base is a material that, when dissolved in water, produces hydroxide ions, or OH-.
Describe acid.A compound that creates salts when it combines with specific metals and releases hydronium ions into water. Acids have just a sour taste and give some colours a reddish tint. Acids can frequently be separated into three categories. Binaries acid comes first, then oxyacid finally carboxylic acid.
What causes acid to exist?They have the capacity to prevent rust on metals, serve as a medium in wet batteries, be an essential part of chemical process industry manufacture, and be used as artificial flavors for drinks and food.
To know more about acid visit:
https://brainly.com/question/29796621
#SPJ4
What are the empirical and molecular formulas of benzene?
The empirical and molecular formulas of benzene is C6H6. Six carbon atoms make up the closed ring benzene, which is joined by alternating single and double bonds.
What exactly are the molecular formula and empirical formula?The simplest whole-number ratio of the various atoms in a compound is represented by an empirical formula. The precise number of various atom types present in a compound's molecule is indicated by the molecular formula.
What is benzene, exactly?The chemical compound benzene has the molecular formula C6H6 and is an organic chemical. Six carbon atoms are connected in a planar ring to form the benzene molecule, and one hydrogen atom is attached to each one. Benzene is categorized as a hydrocarbon because it solely has carbon and hydrogen atoms.
To know more about benzene visit:
https://brainly.com/question/6028840
#SPJ4
what is the hydronium ion [h3o ] concentration of a solution with a ph of 6 ? A) 1 x 106 B) 1 x 10-6 C) 6 x 101 6x D) 6 x 10-1 OE) 6x 10-14
Answer: B. 1*10-6 M
What is the Hydronium ion concentration?
The concentration of hydronium ions decreases with dilution as a result of reactions between acid and water ions, leading to the formation of H2O. This makes the solution less acidic as the concentration of hydronium ions decreases.
We know,
pH = - log [H3O+]
where [H3O+] = concentration of hydronium ion
we have pH = 6
6 = - log [H3O+]
Concentration of hydronium ion, [H3O+] = Antilog (-6) = 1*10-6 M
Therefore, option B) 1*10-6 is correct.
To learn more about Hydronium ion concentration, click on the given link: https://brainly.com/question/1396185
#SPJ4
The hydronium ion [h3o ] concentration of a solution with a ph of 6: 1*10-6 M
What is the Hydronium ion concentration?
The concentration of hydronium ions, also known as the acidity or pH of a solution, is typically expressed on a scale from 0 to 14, where 0 indicates a highly acidic solution, 7 indicates a neutral solution, and 14 indicates a highly basic or alkaline solution. The concentration of hydronium ions in a neutral solution is typically around 1 x 10-7 moles per liter (M).
We know,
pH = - log [H3O+]
where [H3O+] = concentration of hydronium ion
we have pH = 6
6 = - log [H3O+]
Concentration of hydronium ion, [H3O+] = Antilog (-6) = 1*10-6 M
Therefore, option B) 1*10-6 is correct.
To learn more about Hydronium ion concentration, brainly.com/question/1396185
#SPJ4
During which stage of the water cycle does water from the ocean form clouds?
Explain please?
Hello!
During the stage of condensation of the water cycle water from the ocean forms into clouds. Condensation, the opposite of evaporation is when water vapor in the air is transformed into liquid water. This stage in the water cycle is important since its role is creating and forming clouds.
Hope this helps!!
Acetylene gas (C2H2) is produced as a result
of the reaction
CaC2(s) + 2 H2O(ℓ) →
C2H2(g) + Ca(OH)2(aq).
If 37 g of CaC2 are consumed in this reaction, how much H2O is needed?
Answer in units of mol. Answer in units of mol.
Acetylene gas (C2H2) is produced as a result of the reaction CaC2(s) + 2 H2O(ℓ) → C2H2(g) + Ca(OH)2(aq). If 37 g of CaC2 are consumed in this reaction, 1.1 moles of water needed.
What is mole ?The term mole is defined as the amount of substance of a system which contains as many elementary entities.
1 mole is equal to 6.023 × 10 ²³ molecules.
Given:
mass of CaC₂ = 37 g
mass of water = ?
The balanced reaction is as follows:
CaC₂ + 2H₂O ⇒ C₂H₂ + Ca(OH)₂
2. Convert mass of CaC₂ to moles
molecular mass CaC₂ = 40 + (2 x 12)
= 40 + 24
= 64 g
64 g of CaC₂ = 1 mol
37 g = x
x = (37 x 1) / 64
x = 37/64
x = 0.57 moles of CaC₂
3. Calculate the moles of water
1 mol of CaC₂ ----------------- 2 moles of water
0.57moles of CaC₂ --------- x
x = (0.57 x 2) / 1
x = 1.1 moles of water
Thus, If 37 g of CaC2 are consumed in this reaction, 1.1 moles of water required.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ1
Question 1
O pts
The water-gas shift reaction is a common source for hydrogen.
CO(g) + H2O(g) CO2(g) + H2(g)
a
At 850 K this reaction has a Kp = 2. 0. Calculate the equilibrium concentration of each
gas is the initial concentration of each of the is 0. 350 M. Determine the equilibrium
concentration of CO and CO2. Give answer to 2 significant figures.
The equilibrium concentration of CO is
___mol/L.
The equilibrium concentration of CO2 is
____mol/L.
The equilibrium concentration of CO is 0.175 mol/L and the equilibrium concentration of CO2 is 0.175 mol/L.
What is equilibrium?
Equilibrium is the state of balance between opposing forces. It is a situation in which all competing influences or forces are balanced and cancelling each other out. The concept of equilibrium can be applied to physical, chemical, and economic systems, among others. In physical systems, equilibrium occurs when the forces acting on an object are balanced, so that the object remains in a constant state. In chemical terms, equilibrium is a state in which the concentrations of reactants and products remain constant with time. In economic terms, equilibrium occurs when the supply of goods and services is equal to the demand for them. All of these systems strive for the same thing: stability and balance between competing forces.
To know more about equilibrium visit:
brainly.com/question/17070972
#SPJ4
what other configuration information does it provide? name two.
An IP address provides information about the network location and host ID.
An IP address is a numerical label assigned to each device connected to the internet or a local network. It is used to identify and locate devices on the network so that data can be transmitted between them.
In addition to providing information about the network location and host ID, an IP address also provides information about the network class and the subnet mask.
The network class of an IP address can be determined based on its first few bits. The different classes of IP addresses (A, B, C, D, and E) are used to define different ranges of IP addresses and are used to route data on the internet.
To learn more about configuration, visit:
https://brainly.com/question/13410673#
#SPJ11
A solution of toluene in 301 g of cyclohexane has a boiling point of 90.3 °C. How many moles of toluene are in the solution? (For cyclohexane Kb = 2.92 °C/m, Tb = 80.9 °C)
The moles of toluene are in the solution found to be 0.96mol.
What is the value of m in delta tb?Solutions of any solute are compatible with the equation Tb=Kbm (where Tb is an increase in boiling point and'm' denotes solution molality). Non-volatile solute-only diluted solutions. Non-volatile solutions in all concentrations.molar mass toluene = 92.14g/mol
Tb = 80.9
Kb = 2.92 °C/m
ΔTb = i x Kbx molarity
90.3-80.9 = 1 x 2.92 x m
3.219 = m
m=> mol/kg of solution
3.219 = mol of toluene/0.301Kg
=>0.96mol
What is the elevation of the boiling point?When a solute is introduced, the boiling point of a solvent rises, a process known as boiling point elevation. The solution produced when a non-volatile solute is dissolved in a solvent has a greater boiling point than the solvent alone.
Learn more about boiling point here:
brainly.com/question/2153588
#SPJ4
which of the following is only a physical change? group of answer choices sugar dissolves in coffee. a banana ripens. leaves turn colors in the fall. at least two of the above (a-d) exhibit only a physical change. cookies burn in the oven.
Suger dissolve in coffee is only a physical change or property. So, the option (a) is right choice here.
A physical change is a type of change in which the form of matter (substance) changes, but without the change of one substance into another. A physical change, changes the shape, size, or phase of matter. For example, if you carve a piece of wood into a baseball bat, it will burn in fire and float on water. It's still a tree, so it's a physical change. Similarly, crumpling paper, getting a haircut, dissolving salt in water, melting wax, making ice cubes, chopping vegetables for a tossed salad are all physical changes. There are 4 options and you need to decide which option causes a physical change. As you can see in option (c), the color of autumn leaves is a chemical change. Similarly, in option (d), the burning of cookies in the oven is based on temperature, which is a chemical change. As bananas ripen, brown bananas are a chemical change due to the formation of a new, darker (and less palatable) substance. So option (a) is the correct.
To learn more about physical change, refer:
https://brainly.com/question/14444325
#SPJ4
Complete question:
Which of the following is only a physical change? group of answer choices
a) sugar dissolves in coffee.
b) a banana ripens.
c) leaves turn colors in the fall.
d) cookies burn in the oven.
The decomposition of HOF occurs at 25 degree C. HOF (g) rightarrow HF(g) + 1/2 O_2 (g) Using the data in the table below, determine the rate law, and then calculate the rate constant.
A chemical reaction's rate law defines the link between the reaction rate and the concentrations of the reactants. Experiments using varied amounts of reactants and monitoring.
the related reaction rate can be used to estimate the rate law. The rate law must first be defined before the rate constant can be calculated. This is commonly accomplished by doing experiments at various doses of reactants and monitoring the reaction rate. The rate law may then be calculated by fitting the experimental data to an equation like this: rate = k * [Am * Bn] where k denotes the rate constant, [A] and [B] denote the reactant concentrations, and m and n denote the reaction orders with respect to each reactant. A chemical reaction's rate law defines the link between the reaction rate and the concentrations of the reactants. Experiments using varied amounts of reactants and monitoring.
learn more about rate law here:
https://brainly.com/question/30379408
#SPJ4
What is the name of the compound NO2?
Responses
A nitrous oxidenitrous oxide
B nitrogen dioxide
The name of the compound NO₂ is nitrogen dioxide. Therefore, option B is correct.
What is compound ?A compound is a substance composed of two or more distinct chemical elements combined in a predetermined ratio. When the elements combine, they react and form chemical bonds that are difficult to break. These bonds form as a result of atoms sharing or exchanging electrons.
The compound NO₂ is a compound because the nitrogen dioxide consist of two atoms that are one nitrogen and two oxygen atom therefore, it is called as nitrogen dioxide.
Thus, option B is correct.
To learn more about the compound, follow the link;
https://brainly.com/question/14117795
#SPJ1
under which condition did the co2 indicator turn more alkaline why
The algae bead could carry out photosynthesis more in the presence of light, which caused the CO2 indicator to become more alkaline.
Describe alkaline.
The meaning of alkaline is: having the characteristics of the an alkali or alkaline metal; being an alkali; or being related to one: a solution that is basic, in particular, and has a pH greater than 7 having the characteristics of a hydroxide or liquid metal; being an alkali; or being related to one: a solution that is particularly basic: whose pH is greater than 7
What characteristics do alkalis have?
Alkali properties. Because fatty acids in skin are saponified, alkaline bases have a slimy or sticky feel to the touch. Alkalis are all Arrhenius bases because they dissolve in water to produce hydroxide ions (OH-). Some alkalis, like barium carbonate, are typically water-soluble.
To know more about alkalis visit:
https://brainly.com/question/11584594
#SPJ4
give a systematic name for the following formula: k2[cucl4]
The systematic name for the formula K2[CuCl4] is potassium tetrachloridocuprate(II).
The "K2" part of the formula refers to the potassium cation, and the "[CuCl4]" part of the formula refers to the anion, tetrachloridocuprate(II).
This systematic name is based on the International Union of Pure and Applied Chemistry (IUPAC) naming conventions for inorganic compounds.
Potassium is a chemical element with the symbol K and atomic number 19. It is a silvery-white metal that is reactive with water and air, and is classified as an alkali metal. Potassium is an essential element for life and is widely distributed in nature, occurring in compounds such as potassium chloride (KCl) and potassium sulfate (K2SO4).
In the human body, potassium is a vital electrolyte that helps regulate fluid balance and maintain normal heart and muscle function. It is also an important component of fertilizers, due to its role in plant growth and water regulation.
To learn more about inorganic compounds:
https://brainly.com/question/2169750
#SPJ4